Debian Configuration :: Error: Module Ndiswrapper Not Found
May 23, 2010
I installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.
[Code]...
View 1 Replies
ADVERTISEMENT
Jan 28, 2011
i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies
View Related
Mar 2, 2010
Ok, I just upgraded from Slackware 13.0 to Slackware-current and now when I run modprobe ndiswrapper I get the following error.FATAL: Module ndiswrapper not found.Im not sure what happened on this. I did a search in google and couldn't find anything useful any help would be appreciated.
View 14 Replies
View Related
Nov 8, 2009
I'm trying to configure ndiswrapper but when I run
Code:
modprobe ndiswrapper
it says
Code:
FATAL: Module ndiswrapper not found.
I know it needs usbcore so I run
Code:
modinfo usbcore
modinfo: could not find module usbcore
So How should I get usbcore working?
View 6 Replies
View Related
Apr 24, 2010
I updated to the latest kernel from Suse 11.2 repo. My wireless device won't load firmwares, ndiswrapper won't be a module anymore etc. :
Code:
inux-kqzq:/home/olivier/T l chargement/fwextract3 # modprobe ndiswrapper
FATAL: Module ndiswrapper not found.
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /usr -name ndiswrapper
/usr/sbin/ndiswrapper
^C
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /lib -name ndiswrapper*
/lib/modules/2.6.31.5-0.1-desktop/updates/ndiswrapper.ko
linux-kqzq:/home/olivier/T l chargement/fwextract3 # uname -r
2.6.31.12-0.2-desktop
2.6.31.12-0.2-desktop is uname
and 2.6.31.5-0.1-desktop is the module
View 1 Replies
View Related
Oct 12, 2014
ERROR: No configuration file found
No Default or UI configuration directive found!
boot:_
This appears when I try to boot Debian 7.6.0 from my USB drive
View 1 Replies
View Related
Jul 20, 2010
I have a new installation. I try to boot and instead of my grub menu, I get "error: file not found" and am dropped into the rescue prompt. I have just a standard "Desktop" installation. I installed from the 5.05 net install cd. I installed grub to the MBR.
partitions are:
hd0,2 is /
hd0,5 is swap
entering the "set" command results in:
prefix=(hd0,2)/boot/grub
root=hd0,2
[Code]...
View 1 Replies
View Related
Jun 1, 2011
I have a Dlink DWA-142 usb wireless adapter that I am trying to configure on a Debian 6.0 system. I couldn't find any linux drivers for this card so I used ndiswrapper. The drivers (latest xp version from the website) have installed successfully as far as i know because I can see the card and scan for access points using 'iwlist wlan0 scan'.
I tried to use the card with both Wicd and NetworkManager, which both fail to connect to my WPA encrypted wireless router. So after this I went to the command line to find that if I try to connect to the accesspoint using Iwconfig, that the program hangs... as in my terminal does not write a new line because it is waiting for the above command to complete.
I have done:
And the terminal hangs on the above command, so I imagine this is where wicd and network manager were getting stuck too. ndiswrapper is the latest version, compiling from source and reinstalling it made no difference either.
View 8 Replies
View Related
Apr 21, 2010
I was able to successfully put together the driver with the Linksys WUSB100 v2 using ndiswrapper.
Here is what i get from ndiswrapper -l: rt2870: driver installed device (1737:0078) present (alternate driver: rt2870sta)But, the catch is where it maps to: ra0 instead of wlan0. This has caused me problems in order to get it to connect through network-manager or in the terminal.
ifconfig output for ra0:
ra0:
Link encap: Ethernet HWaddr 00:1e:e5:e8:14:e6
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
View 4 Replies
View Related
Dec 18, 2010
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
View 4 Replies
View Related
May 17, 2011
I'm trying to create an xorg.conf file. I've used Xorg :1 -configure and Xorg -configure in the console but i keep on getting the same error message.
FATAL: Module fbcon not found. Number of created screens does not match the number of detected devices. Configuration failed.
View 7 Replies
View Related
Jan 19, 2010
I have a set of two amd64 machines with Debian Lenny. Machine 2 reads all the users' information from the Machine 1 through LDAP. Also, in Machine 2 I set up a dchroot environment for 32 bits compatibility ( following [URL]
In addition to the above instructions, on this Machine 2, I set up /etc/libnss*, /etc/ldap/*, and /etc/nsswitch.conf both for the amd64 and for the i386 environments. I have no problems if I'm in the native amd64 mode. However, once I enter the i386 dchroot, some strange things happen:
1) For users from uid=1000 to uid=1031, I get an error if running 'whoami' (Cannot find name for user ID XXXX) and if I run 'id' , I get all the correct group numbers but no translation to group names in parenthesis as it should be. 'ls -l' also only lists group numbers but no names.
2) for user 1032 I cannot even change into the dchroot, I get the error "E: Group '1,031' not found"
View 2 Replies
View Related
Jul 31, 2015
After upgrading from Debian Wheezy to Jessie, I figured out I needed to install the nvidia drivers in order to play some Steam games. Went to Debian wiki, installed drivers from there, rebooted, stuck in command line. I can't remember what errors did it give though. After a couple days of searching on the internet the problems and trying different things like purging everything nvidia and reinstalling the drivers in different ways and still no success I thought : Perhaps I installed the wrong nvidia drivers?
Did some research, found out that I might have an Optimus system ( from what I read, I have one because I am in possession of 2 graphic cards, an intel and an nvidia one . Installed Bumblebee, everything worked fine until I rebooted and once again, I couldn't move out of the command line. Tried to startx, error no screens found. Opened log, nothing wrong until it gets to the part of loading the nvidia module, which fails and tells me such module does not exist.
Looked into the module folder, there is no nvidia there. I'm also running a dual-boot Dell Inspiron N5110, with Windows 8.1, which I am currently on and Debian Jessie with GNOME.
View 8 Replies
View Related
Mar 20, 2010
I want to connect my mini dv camcorder to my pc and capture video, but I cannot load raw1394. When I try to "modprobe" it. It says:
"FATAL: Module raw1394 not found".
My kernel is 2.6.32-3-amd64
Should I compile it to kernel manually, if so how?
View 2 Replies
View Related
Jan 9, 2010
I'm running Fedora 12 LXDE spin on a netbook (Asus EeePC) and have successfully installed a wireless driver using ndiswrapper. The only problem is that every time I reboot, I need to use the "modprobe ndiswrapper" command to load the module.
Is there a way to load the ndiswrapper module during the boot process?
View 3 Replies
View Related
Dec 20, 2009
while booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.
View 2 Replies
View Related
Mar 3, 2011
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies
View Related
Jan 31, 2010
Boot up with 2.6.32 kernel. Get to login screen, X attempts to start and fails. I log in, execute startx and succeed. Yesterday, could not boot up at all with .30 kernel. Upgraded to .32, so partially fixed. Yesterday also un-installed Synaptics package, as do not have touch-pad on this machine (Thinkpad X40)
This from kdm.log:
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian .....
View 3 Replies
View Related
Jun 17, 2010
I have a broadcom 4318 chipset for my wireless card, but after an upgrade to lucid my system was acting funny. I did a complete reinstall and all the issues are resolved except the wireless card. I would like to get the b43 module working instead of ndiswrapper. How can i do this right in lucid?
View 2 Replies
View Related
Jul 9, 2015
I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.
Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h
From the 4.1rc1 kernel I know what to patch and where.
Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?
View 6 Replies
View Related
Dec 16, 2015
I have recently rented a VPS server so I can run a VPN. Unfortunately, I did not get far in this [URL] ....., I have encountered this error:
Code: Select allxaver@xaver:/$ sudo modprobe tun
ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
So I googled this error and found this: [URL] ....., however response of mine VPS was:
Code: Select allxaver@xaver:/$ ls /lib/modules/uname -r /kernel/drivers/net/tun.*
ls: cannot access /lib/modules/uname: No such file or directory
ls: cannot access /kernel/drivers/net/tun.*: No such file or directory
Code: Select allxaver@xaver:/$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:Â Â Debian GNU/Linux 7.9 (wheezy)
Release:Â Â Â Â 7.9
Codename:Â Â Â Â wheezy
xaver@xaver:/$ uname -a
Linux xaver 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u1 x86_64 GNU/Linux
View 2 Replies
View Related
Jun 16, 2010
I am on squeeze with kernel 2.6.32-3-amd64 and I have installed nvidia driver :cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009 GCC version: gcc version 4.3.4 (Debian 4.3.4-8)
View 1 Replies
View Related
Mar 14, 2016
I built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type
Code: Select allsudo modprobe 8821au
I get a
Code: Select allmodprobe: FATAL: Module 8821au not found..
But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:
Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko
it seems to work:
Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.
But lsmod doesn't show me the module after that.
I also added
Code: Select all./kernel/drivers/edimax/8821au.ko
to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.
So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.
View 3 Replies
View Related
Jul 30, 2010
I upgraded my kernel in my Debian Lenny to version 2.6.32-bpo.4-amd64 to fix a problem with a software and ALSA-related issues. The thing is that now, when I boot, eth1 is not enabled and I have to "load" (I guess) the driver each time. To do this, I go to the folder where all the files for the drivers are and I run:
modprobe lib80211
and then
insmod wl.ko
That I got from the readme file. That gets the wireless working perfectly again, but when I reboot the wireless is dead again and I have to run the commands above again. I imagine that what I should do is to build the driver again, for my new kernel. However, according to the readme file, before I need to install linux-headers-generic and build-essential. With build-essential, it says it's already the newest version, and with the linux-headers, I don't know which one should I install for my kernel! I thought it would be the linux-headers-2.6.32-bpo.4-xen-amd64, but when I tried that, this is what happened:
debian:/home/hernan/Programas/hybrid_wl# apt-get install linux-headers-2.6.32-bpo.4-xen-amd64
Reading package lists... Done
Building dependency tree
[code]....
So the warning says something about the MODULE_LICENSE being missing... how to build the driver again to make it load each time I boot?
View 3 Replies
View Related
Oct 26, 2010
I'm running Testing and need to pass some parameters to my bttv tv tunner card, for this reason I created the following file /etc/modprobe.d/kozumi.conf with this content:
alias char-major-81 videodev
alias char-major-81-0 bttv
options pll=1 radio=1 bttv_verbose=1 card=151 tuner=38 gbuffers=4
The problem is that for some reason this options aren't properly set after booting the computer, I've tried different combinations for line 1 and 2 without success.
I'm used to rmmod the bttv driver and modprobe manually with those settings but I'd like to automate the process.
View 2 Replies
View Related
Aug 17, 2010
error found with your "Postfix virtual maps": No "map sources" were found in the Postfix configuration. your system is not ready for use by Virtualmin. how do I set this?
View 2 Replies
View Related
Jun 15, 2010
Squeeze's latest update has upgraded my kernel from 2.6.32-3-686 to 2.6.32-5-686.My wireless stopped working and then I realised that I had to rebuild the wifi modules. I had followed this earlier.URL...For this new kernel, which I step of the process should I repeat? Rebuild module? Or just do a modprobe?
View 4 Replies
View Related
Mar 2, 2011
I have a printer connected locally to my Debian box. It runs fine via cupsd.I am also running a Windows 2003 VMware guest which I would like to use the printer (use as a local printer, not a network printer).
VMware offers a connection via USB, so it should work. The printer I have plugged locally into the Debian host is recognised by the Windows 2003 guest, but it won't print. I get an error message saying that the printer is still connected to the host OS, and that I need to remove (or presumably disable) the host driver before the guest can use the printer.
So how can I find out which printer driver/module is being used by the Debian host to connect to this printer? And what is the best way to temporarily disable it, while my VMware guest is running?
View 3 Replies
View Related
Jun 14, 2010
I installed Ubuntu on a computer which had Windows 7 pre-installed on it. Everything was working fine for a day until it gave me this error: "No module name found. Aborted." This is the result of boot info script:
[Code]....
View 2 Replies
View Related
Jun 14, 2010
I'm trying to install Apache2::Request module (from CPAN.org) and in shell there is such messages: I'm using openSUSE 11.1, Perl 5.8
[Code]...
View 2 Replies
View Related
