I just installed ndiswrapper so I could install my wireless PCI card drivers.I did that and it is recognized and so is the network I want to connect to.But for some reason, it just wont connect. It will spend a long time trying to connect, but then just says "disconnected".What could be the problem? It's not like I have a bad connection or anything
View 2 RepliesBefore I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
I just recently put Ubuntu 10.04 Lucid Lynx on my laptop with windows dual booting. I'm pretty new to all this stuff, so I'm a bit confused. I followed instructions I read on here, but none of it seems to be working. I put all of the 3 Ndiswrapper things on, and then copied the .inf and .sys files from windows into the same directory. I just want to connect to my home network, which has WEP security.
View 14 Replies View RelatedI just installed ubuntu on my hp desktop that has wireless built in. I finally found the windows inf and sys driver files, and learned how to get ndiswrapper without internet and installed the driver. It says that i have the hardware it controls, but when I look at the connection icon, it says not connected, has lost the wireless connection block, and I am not connected to the internet. The wireless is called USB Wireless 802.11 b/g , but it is not usb and is plugged straight into the motherboard with the only physical part is the antenna. Why can't I connect?
View 9 Replies View RelatedI've got ubuntu (its google os but its the same as ubuntu) and I've tried millions of times to get my internet working. I've tried the ndiswrapper thing but I am not sure how to get and install it.
View 2 Replies View RelatedI've been using a RealTek 8190 PCI wireless card on my desktop in Ubuntu 10.04. The net819xp driver worked fine in ndiswrapper. Then my housemates got a new router and switched our wireless SSID & password. In network manager, I can see the SSIDs, but when I try to connect to our SSID, it continues trying to connect but never does connect. Something related to the router change and router firmware upgrade created this problem and i'm sure i need to fix it on my computer. All my windows7 flatmates are connecting with no problem. Right now I'm using my laptop, so i can't copy & paste results from terminal commands,
View 1 Replies View Relatedhow to use the Sitecom WL-324 usb stick with ubuntu (10.10)? (It works with windows.)
lsusb | grep Ralink
Code:
Bus 002 Device 004: ID 148f:2878 Ralink Technology, Corp.Im using Ubuntu 10.10 x64 with a Phenom(tm) II X6 System My results so far:
sudo modprobe rt2870sta (or rt2800usb)
result (rt2870sta) :
lsmod | grep rt28
Code:
rt2870sta 445182 0
crc_ccitt 1699 1 rt2870sta
dmesg
[code]....
I have a problem with the fritz!wlan usb stick. I have installed itth success on another PC by using instructions published here Ndiswrapper - openSUSE.Today I have decided to erase WindowsXP from my wife's computer (that is an identical to the one I use). So I have downloaded the OpenSuse 11.2 DVD and I have performed a completely new installation from DVD.After installation has been executed with success, I have decided to install an internet connection using the istructions above. I told to myself: "it will take 5 minutes, all I must to do is to reply action I have done one month ago... the internet usb-stick is the same, so it will be easy to replicate the process..."I was wrong... When I reach the point where I must "modprobe" the ndiswrapper module I receive what follows:
Code:
linux-2n4g:/home/mila/Desktop # modprobe ndiswrapper
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in
[code]...
I am trying to connect my desktop to my laptop over a non-internet connected LAN, but when i enable the LAN connection on my desktop (the one with the wireless) its internet stops working.
it is a very similar problem to this except that i am using ubuntu for the machine with the two connections.
right now i have my wireless on the 192.168.1.* address space, while the LAN is to be on 192.168.5.*
note: my goal is not to share internet with my laptop, just be able to connect to it and the internet at the same time.
desktop: ubuntu 9.10 , wireless and LAN
laptop: windows xp, LAN only
I recently installed ubuntu on my mom's computer but I can't get the mouse to move trough the touch pad and I suspect the USB is not working either, because I can't get anything to work trough the USB, and the Internet is not working trough the cable, and I think wireless as well. Her computer is an old acer aspire 3000
View 2 Replies View RelatedI have no internet available, but the driver seems to be installed (kernel driver r8169). I'll follow the steps for posting on the wireless forum this time:
1) I'm using a desktop. Intel Core i7-870 2.93Ghz 8md Quad Core. Motherboard is an ASRock H55M-LE LGA1156. 4GB RAM DDR3.
2) The wireless card is:
p { margin-bottom: 0.08in; } 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: ASRock Incorporation Device 8168
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at c800 [size=256]
Memory at cfdff000 (64-bit, prefetchable) [size=4K]
[Code].....
I have installed a wireless card in my Ubuntu 9.04 System. When I start Firefox, it keep searching for a while and it cannot connect to the internet. I have attached screen shots of network connections. When I type the address of the router in the browser address window, it cannot access the router.
View 2 Replies View RelatedI downloaded ubuntu 10.10 in my PC alongside with windows 7 yesterday. However it could not detect my wireless LAN then with some hardwork I was able install the wireless device driver but still no internet!
View 1 Replies View RelatedI have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
i really like opensuse because it looks cool, heard it has th ebest kde out there, and seems very professional compard to ubuntu and kubuntu and minti have one problem stopping me from using kde, and its in all versions.i use a pppoe connection, and in gnome i simply right go to edit connections, DSL, make new dsl, enter my information, set to connect automaticcly, go to auto eht0 disable connect automaticcly, boom internet at startup. i cant find out how to make a pppoe connection in opensuse at all in fact.the DSL in internet manager is greyed out.this should be something very simple to do, how do i go about doing it?
View 9 Replies View Relatedhave installed RHEL 5 recently and want to use internet on it. However it doesn't activate my connection when I try activating it through System>Administration>Network>Devices Tab.
My network adapter is "Realtek RTL8139/810x Family Fast Ethernet NIC", and processor is Intel Core 2 Duo. I read in a thread somewhere to edit a file named resolv.conf to include DNS server address, but don't know how to go about it exactly. I asked my ISP and he gave me two DNS Ip addresses
I've bought an RALINK getnet Wireless USB adapter and am trying to get it to work on a dual boot pc running XP and 9.10. According to the forums and the manufacturers website (www.getnet.com.tw), this should be supported in Linux.
Using the disk that came with it, I have gotten it to work in Windows. I've spent nearly a day scouring the Ubuntu forums and trying different things, but still haven't got it working in 9.10. (I think that most of my confusion is that many of the threads are for earlier versions)
If I type "iwconfig", I get this:
Code:
graeme@graeme-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
[Code].....
I have the CD that has a LINUX directory, but am not sure what to do with it. Through other threads I have determined that my drivers are rt2870.sys and .inf and have downloaded these. I'm not really sure what to do with them next..... Many threads talk about going System>Administration>Networking, but I don't have this as an option. I have however got an option which I downloaded called "Windows Wireless Drivers" which seemed to let me load the rt2870.inf driver, but then says "No" after it (not very helpful).
I have enabled Wireless Networking, and added my SSID etc etc, but I still don't connect.
According to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies View RelatedI recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
View 9 Replies View RelatedI have an Acer Aspire One D255 netbook with opensuse 11.3 installed and after several painstaking days of tinkering I successfully installed the broadcom wl drivers, and now my wifi card is operational. However, i can connect to my wireless network, but still have no internet access. I have searched the forums and google for a solution but most issues I have found that are similar to mine have been resolved once the wl drivers and firmware where installed
View 2 Replies View RelatedI'm trying to get a Belkin f5d8010 working. I installed ndiswrapper from Add/Remove software, but when it was done, I couldn't find it. Checking the forum, I ran across something saying that I had to compile from source. This is in Fedora 13. Can I get it working with "point-and-click," or do I have do something that requires some thought?( I don't have many of those.)
View 14 Replies View RelatedIv just installed 10.10 but my wireless doesnt seem to be working.Iv checked that the physical switch is on at boot (since that used to be a problem with previous releases) but to no avail.
View 3 Replies View RelatedI have tried to get ndiswrapper to work on an ubuntu 9.04 32 bit system but have yet to succeed. After installing the windows driver, the usb wireless network adapter is recognized but will never connect to the internet. I have disabled the driver included with jaunty. Now what makes this strange (at least to me) is that ndiswrapper works perfectly with ubuntu 9.04 64 bit. It could very well be something that I am not doing in the 32 bit system (but I don't know what that might be).
I have tried ndiswrapper with several other distros with the same result. So, I don't think it is specifically related to ubuntu however, since ubuntu is what I am using, I am posting in this forum hoping that someone might be able to help me. I have several 32 bit machines I would like to set up but cannot until I get this resolved. I have also tried downloading and compiling a native driver with no success either. Anyway, here is my setup:
PC with AMD64 dual core processors running at 2Ghz and 3 GB ram.
Belkin N150 Enhanced Wireless Router
Belkin N150 Enhanced Wireless USB Network Adapter
And an aside: I am using WICD network manager and would like to know what the tray icon means when it says it is connected at say 54%. My question is, 54% of what? In windows this info is given in Mbps which is more meaningful.
So I have installed Ubuntu on my desktop, I have a wireless card that I know works w/ ndiswrapper and the INF/sys files I have, but I have no way of getting connecte to the internet (Ethernet requires and update) . So, My question is, Can I install Ndiswrapper w/o an internet connection (maybe put it on a CD or Flashdrive?).
View 3 Replies View RelatedNow, lets make this clear: I am a COMPLETE linux noob. I only installed ubuntu today (dual booting with Windows 7). The thing is, my wireless is working perfectly in windows. However, I can't get it to work in Ubuntu. It detects my internet, but refuses to connect. I'm 100% sure that I have used the right password.I have an Atheros AR5007 wifi adapter. I'm liking the look of Ubuntu, but if I can't solve this it's pretty much useless to me.
View 5 Replies View RelatedI have been looking around and it seems that having a wireless USB network to connect to the internet is difficult on Ubuntu.
All I know is that it seems that my wireless linksys network card is a WUSB600N Anyone that has any commands they want me to put in my terminal I can tell you but from other forums I try to put many in and get no output simply because I believe I do not have the drivers but do not fully know how to even install these drivers in the terminal or am not doing something right.
I have a Dell Vostro 1500 that has a Broadcom BCM4312 wireless card installed. I do not have access to a wired connection to the web so any thing I have to install is a download on my windows machine and then transfer that to the debian machine. I just finished installing Debian Squeeze but can not get my wireless card to scan for any networks. I found a tutorial at [URL] and followed the steps there. Finding all the dependances and installing them one by one (took me all day). My wireless card still will not scan for networks. After doing a 'sudo ifconfig eth1 up' it still will not scan for networks.
Output from ifconfig:
raygo75@RayGo-2:~$ sudo ifconfig
eth1
Link encap:Ethernet HWaddr 00:16:44:9b:e9:cc
inet6 addr: fe80::216:44ff:fe9b:e9cc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17 Base address:0xc000
lo
Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:28 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1900 (1.8 KiB) TX bytes:1900 (1.8 KiB) .....
How do I get around this? It wants to get something from [URL] and I do not have internet access. It looks to me like it just wants to download the wl dirver, again, which I have done in the previous instructions I found. I am a retired UNIX (hp-unix) administrator so I know my way around the system.
just now installed Ubuntu 10.10 on my Lenovo Thinkpad X41 it did connect to the wireless internet at the time of installation but failed to connect after the installation was complete and i restarted the computer. It keeps on asking me the Key but for some reason doesn't take it. I have Intel PRO/wireless 2915 ABG network card.
View 4 Replies View RelatedI installed Ubuntu 10.4, eveyrhing works fine but the internet. I was wondering if anyone knew how to troubleshoot this? My card is an intel 82577LC Gigabite Network Connection. I was able to find a driver, I think, not sure at this link [URL]... The problem is I dont know how to install it after I download it, to see if it works.
View 2 Replies View RelatedI just installed Ubuntu 10.10 Netbook remix on a Toshiba NB505.My wireless internet is not working.I can connect fine wired, but it doesn't even give me any kind of option for wireless
View 9 Replies View Related