I am trying to connect to my WEP enabled wireless network. I have a pci wireless card with chipset id 10ec:8190, and installed the driver (net8190p.inf) with ndiswrapper on Ubuntu Linux 8.10. I am able to connect when I disable WEP, so I'm sure that the driver is installed correctly and is working. I am connected now from XP with WEP enabled. How to get my Ubuntu distro connected here?
View 1 Replies
i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies View RelatedThis laptop arrived in the post yesterday and everything on f15 works out of the box except wireless.Digging out an old ethernet cable I was finally able to get wireless working by doing the following: First install ndiswrapper. We'll be using rpmfusion for this so you'll need to
[Code]...
After a reboot it all loaded and worked fine, just remember to make sure the little light on the f12 button is blue, not red. This guide should work for other laptops and other distros as well (though obviously you'll likely need a different driver file to start off with).
I have a broadcom 4318 chipset for my wireless card, but after an upgrade to lucid my system was acting funny. I did a complete reinstall and all the issues are resolved except the wireless card. I would like to get the b43 module working instead of ndiswrapper. How can i do this right in lucid?
View 2 Replies View RelatedI'm trying to get internet set up on my grandad's laptop (sony pcg-f590), which has a fairly old pcmcia belkin 54g wireless card. I've installed the relevant bcmwl5a.inf driver through ndiswrapper, and for a time wireless worked so I installed updates through update manager. however after restarting the network manager menu comes up with "wireless networks disconnected" and no list of networks (I know there are because my laptop works and his is sitting next to the router!). The light is on on the network card so I know the laptop is talking to it. Unplugging and replugging the card does nothing, and neither does restarting again.
View 1 Replies View RelatedBefore I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
I've been using a RealTek 8190 PCI wireless card on my desktop in Ubuntu 10.04. The net819xp driver worked fine in ndiswrapper. Then my housemates got a new router and switched our wireless SSID & password. In network manager, I can see the SSIDs, but when I try to connect to our SSID, it continues trying to connect but never does connect. Something related to the router change and router firmware upgrade created this problem and i'm sure i need to fix it on my computer. All my windows7 flatmates are connecting with no problem. Right now I'm using my laptop, so i can't copy & paste results from terminal commands,
View 1 Replies View Relatedhow to use the Sitecom WL-324 usb stick with ubuntu (10.10)? (It works with windows.)
lsusb | grep Ralink
Code:
Bus 002 Device 004: ID 148f:2878 Ralink Technology, Corp.Im using Ubuntu 10.10 x64 with a Phenom(tm) II X6 System My results so far:
sudo modprobe rt2870sta (or rt2800usb)
result (rt2870sta) :
lsmod | grep rt28
Code:
rt2870sta 445182 0
crc_ccitt 1699 1 rt2870sta
dmesg
[code]....
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
I've got ubuntu (its google os but its the same as ubuntu) and I've tried millions of times to get my internet working. I've tried the ndiswrapper thing but I am not sure how to get and install it.
View 2 Replies View RelatedAny working source for ndiswrapper using apt-get. I tried the one in the sticky by craigevil but it no longer works. Or maybe we just download from sourceforge from now on?
View 3 Replies View RelatedI just installed ndiswrapper so I could install my wireless PCI card drivers.I did that and it is recognized and so is the network I want to connect to.But for some reason, it just wont connect. It will spend a long time trying to connect, but then just says "disconnected".What could be the problem? It's not like I have a bad connection or anything
View 2 Replies View RelatedI just recently put Ubuntu 10.04 Lucid Lynx on my laptop with windows dual booting. I'm pretty new to all this stuff, so I'm a bit confused. I followed instructions I read on here, but none of it seems to be working. I put all of the 3 Ndiswrapper things on, and then copied the .inf and .sys files from windows into the same directory. I just want to connect to my home network, which has WEP security.
View 14 Replies View RelatedMy laptop has a Realtek 8187b usb wireless card. It was working using ndiswrapper and WinXP driver in Debian Sid (32-bits version). I cannot use rtl8187 module because I just can use it beside the access point. With Windows (XP, Seven) I can go to my bedroom and use wireless, with Debian and rtl8187 module I can't. Ndiswrapper solved this problem...
Yesterday I've installed Debian Sid (64-bits version) and ndiswrapper is not working anymore. I've tried a lot of drivers (XP, XP64, Vista, Vista64, Seven, Seven64). XP64 version crashes the computer and I need to reboot to use Debian again. My access point is a D-LINK 2640t.
I followed the internet threat to install ndiswrapper
1. downloaded ndiswrapper.tar & untar it
2. type: make KBUILD=/usr/src/kernels/2.6.18-164.11.1.el5-x86_64/
it prompted me:
[root@circuit ndiswrapper-1.55]# make KBUILD=/usr/src/kernels/2.6.18-164.11.1.el5-x86_64/
make -C driver
make[1]: Entering directory `/usr/src/ndiswrapper-1.55/driver'
[Code].....
I'm currently using Ndiswrapper for my wireless usb card that uses the RTL8187B Chipset on Ubuntu 8.04. To get myself to connect I have to run "sudo modprobe ndiswrapper" everytime. Is there a way I can connect automatically?
View 9 Replies View RelatedI have Ubuntu 9.10. My USB WG111v3 Wireless Card uses the rtl8187 driver. This driver is buggy. I would like to use Ndiswrapper instead. How to make it so Ubuntu doesn't load the rtl8187 driver but Ndiswrapper instead?
View 2 Replies View RelatedSo after a quick look around the forums, I haven't seen anything on removing ndiswrapper. What I have done is removed ndiswrapper via synaptic. Now in order to start my wireless card I have to issue:
rmmod ndiswrapper
modprobe ath9k
ifconfig wlan0 up
Basically this is a pain. Does anyone know how to get rid of ndiswrapper completely and set things up to use ath9k automatically?
I recently installed Ubuntu 11.04 to run a Minecraft Server. Now against better judgement and seeing that it is only for 7 people, I decided to use a wireless usb card to connect to the internet. Well, I was told that I was going to have to install ndiswrapper. I downloaded it on my Mac and used a USB drive to transfer it to my desktop. I then double clicked and extracted. I then did this in the terminal:
Code:
To run a command as administrator (user "root"), use "sudo <command>". See "man sudo_root" for details.
[Code]...
I am trying to install ndiswrapper for a netgear wna1100. My nic card is fried so the only way I can use the Internet is with the USB card. I am running fedora core 13 on an older Dell computer.
View 9 Replies View RelatedNdiswrapper works great, but everytime I restart my computer I have to do:
Code:
modprobe ndiswrapper
I tried this:
[code]....
My wireless card (an Atheros AR928x) was not performing very well. At the suggestion of a friend I tried to use NDISWrapper (using the ndisgtk GUI interface) to see if a Windows driver would work better. I found the XP drivers online, tried several versions and, after none worked, I decided that I might as well settle with the crappy quality of the Linux driver and let it go. Sadly, that may not be possible.
I removed the drivers (again via ndisgtk) and now the laptop can't use the card at all. It won't detect any networks (even when just five feet from the router) and I'm not sure what's causing this. I've tried rebooting and rebooting into an older kernel. I checked lspci and it still recognizes the card.
Any idea what's up and how I could fix it?
I have tried to get ndiswrapper to work on an ubuntu 9.04 32 bit system but have yet to succeed. After installing the windows driver, the usb wireless network adapter is recognized but will never connect to the internet. I have disabled the driver included with jaunty. Now what makes this strange (at least to me) is that ndiswrapper works perfectly with ubuntu 9.04 64 bit. It could very well be something that I am not doing in the 32 bit system (but I don't know what that might be).
I have tried ndiswrapper with several other distros with the same result. So, I don't think it is specifically related to ubuntu however, since ubuntu is what I am using, I am posting in this forum hoping that someone might be able to help me. I have several 32 bit machines I would like to set up but cannot until I get this resolved. I have also tried downloading and compiling a native driver with no success either. Anyway, here is my setup:
PC with AMD64 dual core processors running at 2Ghz and 3 GB ram.
Belkin N150 Enhanced Wireless Router
Belkin N150 Enhanced Wireless USB Network Adapter
And an aside: I am using WICD network manager and would like to know what the tray icon means when it says it is connected at say 54%. My question is, 54% of what? In windows this info is given in Mbps which is more meaningful.
Using karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try windows wireless drivers unfortunately i can't get them to work. How can i revert back to original supplied drivers?
View 2 Replies View RelatedI had been having problems with my Asus wireless card connecting to my router. Turns out, using ndiswrapper and the XP driver solved the issue. Based on my title of the thread, the driver worked, I turned off computer at night, next day, I can't seem to start the wireless driver again. How would I go about doing this? I am running Ubuntu 10.04, Asus PCE N13 wireless card.
View 3 Replies View Relatedcant continue when i install or delete ndiswrapper I got this message:
Errors were encountered while processing:
ndiswrapper-dkms
Setting up ndiswrapper-dkms (1.56-1) ...
Removing old ndiswrapper-1.56 DKMS files..
Deleting module version: 1.56
completely from the DKMS tree.
[Code]...
I am trying to install windows wireless drivers using ndiswrapper to have better connectivity around my house(I can only currently get online in certain rooms, very restricted). I have ndiswrapper installed OK, but I am a bit lost on the step where I have to browse to my windows wireless driver(a .inf file I believe), my question is how do I know where this is? I can't seem to locate it at all. I'm running on windows vista.
View 6 Replies View RelatedMaking wifi work with ndiswrapper disabled usb automount. This happened on several ubuntu versions, including 10.10.
After following the directions given in this post [URL] usb automounting stopped working.
I fixed it this way:
Code:
sudo gedit /etc/modules
Added these lines to the file:
Code:
usb_storage
usbhid
Save and exit, worked after reboot or restarting network.
usb automount troubles could also be related to legacy floppy settings in BIOS, see
[URL]
Ubunutu linux and i need a driver for my wireless usb adapter (WNDA3100) but when i try to download ndiswrapper i cant find it with Software Center.
View 9 Replies View RelatedI removed my b43xx driver and installed ndiswrapper using this guide. It worked fine, but after a reboot wlan0 was gone:
Code:
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
It's installed:
Code:
sudo ndiswrapper -l
bcmwl5a : driver installed
device (14E4:4318) present (alternate driver: ssb)
and loaded:
Code:
lsmod | grep ndiswrapper
ndiswrapper 192828 0
