I am not sure why this isn't working. I have source code checked off in software repositories, and I see deb-src lines in sources.list. They are not commented. I'd like to recompile the deb and enable "move to trash" from the right click menu.$ apt-get source baobab Reading package lists... DoneBuilding dependency treeReading state information... DoneE: Unable to find a source package for baobab
View 1 RepliesI noticed on a couple of my friend's computers, the baobab with Fedora and Arch Linux was able to delete folders by right clicking on them. The Baobab with Ubuntu does not have that feature. I then looked at then obtained the source code and ran ./configure --help, and saw nothing about enabling that feature.
View 1 Replies View RelatedA while back there was a lkm called sebek, which is designed to work in a honeypot for finding and studying internet hackers, but its very outdated and wont work with newer 2.6 kernels. Anyone know of any projects currently in the works to mod the kernel source to get it it work again? I know it's easily detected but thought that someone might still be working on somewhere.
View 1 Replies View RelatedAny working source for ndiswrapper using apt-get. I tried the one in the sticky by craigevil but it no longer works. Or maybe we just download from sourceforge from now on?
View 3 Replies View RelatedAfter several days of searching, reading and re-installing, I'm at a complete loss as to why autofs has suddenly stopped working.
Basically, I can see the shared folders on the host computer but as soon as I try to cd into the folders I get "-bash: cd: [directory]: No such file or directory" (where [directory] = shared drive.
The setup used to work and the exact same setup on another computer computer works flawlessly.
I'm running Ubuntu 11.04
Here is the content of auto.cifs:
Code:
Here is the content of auto.master
Code:
And credentials are stored in /etc/auto.smb.goblin (where goblin = name of windows computer sharing folders.
When I do "ls -l /home/shoryuken/TerraDrive/goblin" I get:
Code:
Now if I try to "cd" into any of the shared drives (like D-Drive, GW_Share or TerraDrive) I get the following:
Code:
A second or subsequent attempt at "ls -l" results in:
Code:
Note the question marks that are now everywhere.
I'm not sure where to look to find out why this is failing. The shared drive are visible, but then disappear when I try to access them. The same exact setup, on another machine works perfectly fine.
I am trying to run a script to setup environment variables and then run other commands in a make file. But the source or the dot operator (shell is bash) does not seem to take any effect as the subsequent command didn't pick the environment up. Do I have to put every lines of the environment setup in the first script into the makefile instead?
sample setenv.sh
#!/bin/sh
export MYDIR=/somedir
sample makefile:
all: source ./setenv.sh
echo $(MYDIR)
My SL6.1 Distribution isn't connecting the the source packages from yum. It says something along the lines of the repo???.xml cannot be found for altrpms & sourceforge packages.
I have already tried using the command:
su yum clean all su yum update package-list
but that failed to work.
and su yum makecache
Is there any other way i can try? Like uninstalling the source from yum then reinstalling it?
After several days of searching, reading and re-installing, I'm at a complete loss as to why autofs has suddenly stopped working.
Basically, I can see the shared folders on the host computer but as soon as I try to cd into the folders I get "-bash: cd: [directory]: No such file or directory" (where [directory] = shared drive).
The setup was working before and the same exact setup is being used and is fully functional on another computer.
I'm running Ubuntu 11.04
Here is the content of auto.cifs:
Code:
Here is the content of auto.master
Code:
And credentials are stored in /etc/auto.smb.goblin (where goblin = name of windows computer sharing folders).
When I do "ls -l /home/shoryuken/TerraDrive/goblin" I get:
Code:
Now if I try to "cd" into any of the shared drives (like D-Drive, GW_Share or TerraDrive) I get the following:
Code:
A second or subsequent attempt at "ls -l" results in:
Code:
Note the question marks that are now everywhere.
I'm not sure where to look to find out why this is failing. The shared drive are visible, but then disappear when I try to access them. The same exact setup, on another machine works perfectly fine.
I am very curious about updated graphics in GRUB2. So I want to compile and load grub2. Where can I get the grub2 source code. While browsing I got two links [/COLOR]
[URL] [URL]
First one has upto 1.98. Second link is not working. Can someone point the link where GRUB2 is available.
So I just installed Mandriva and was trying to install alien so I don't have to deal with source anymore. This happened, tried other sources and the same error. Maybe I'm overlooking something simple, but this is killing me.
so, First I wget (url for alien). It finishes.
Then, I start the installation
Code:
me@localhost ~]$ tar xvzf alien_8.1.1.tar.gz
me@localhost ~]$ cd alien
that takes me to where it should. then
[Code]....
Am I doing something wrong with this? Why is the ./configure not recognized?
There is problem with Adempiere(opensource framework based on Java Platform) framework on ubantu9.04,as the last character get blurred in every text field.Sometimes total word became unclear.I have tested this framework with other flavor of linux,it works fine. As this is not error there is no log and I am unable to find the entry point,to search about this problem.I tried changing the the themes,changing the java version,but it wont worked.
View 1 Replies View RelatedIs there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
View 1 Replies View Relatedi am already a little bit familiar with linux and now i want to know better the linux OS. i have downloaded the source code of the krnel from the kernel.org and i dont understand the linux source trees organization, so can somebody do me a favor and give me a link to some internet page (or at least a book) that explains that?? i have searched in the internet with the tag:::linux source trees organization and i have not found nothing interesting
View 1 Replies View RelatedI want to see the source code of smplayer software.from where i can see source code of open source softwares?
View 9 Replies View RelatedWe all know we can install a linux system such as Fedora 10 and use it. Being linux, one should in principle get the source codes for everything that has been precompiled (except the proprietary drivers such as nvidia) in the installation DVDs/CDs. Where are the source codes ? Is there a place I can download them ?
To avoid confusion, I am not referring to the kernel source that can be compiled to give a linux kernel, but that does not include the drivers, such as intel_drv.so.
To be more specific, the intel graphic i810 driver has been built into any linux system, but where is the exact source? One answer may be that primary source intellinuxgraphics.com. However, if anyone tries to download the every changing (i.e., keep updated almost every single day) driver source codes from freedesktop.org, it is almost certain that the source codes will not be the same as the one that is finalized in Fedora 10.
installed the fedora 12, but dont know how to use the source dvd to install the source package.
View 3 Replies View RelatedWhere can I get Ubuntu's source code? Actually I want It's kernel's code. I know I can get the kernel from kernel.org but as I found out that Ubuntu does some patching on the kernel I want to know what are those patches. And yes I know Ubuntu's kernel code can be found in an installed Ubuntu in the file system but thats just the code! I want specifically those patches separately and if any some comments or documents about them. Where can I get these things?
View 1 Replies View RelatedI was trying to install a program from source. I cd'd to the directory then ./configure'd. It was configuring fine until this.
Quote:
checking for GTK+ - version >= 2.4.0... no
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occured. This usually means GTK+ is incorrectly installed.
configure: error: *** GTK+ version 2.4.0 not found! How can I fix this?
i know that the command /.configure will make the "make" file and then i have to make " make install" to install the app. but how to deal with the dependency problem ? i asked my friend about it and he said why dont you use apt instead to install packages but what if i want to use distos like slackware? anyway that friend was not interested in helping me out and i m not expecting to. but can anybody answer this in detail or provide any document on this..
View 6 Replies View Relatedi have created 5 dual layer dvds which havefull lucid lynx repository . but before burning i want to check these dvds to be sure that is they are working fine . so , i want to mount these .iso files as a dvd source via software source manager .
View 7 Replies View RelatedI have been using Linux for 2 months, specifically Ubuntu, and been wondering where the source code is. Not only do I wonder where the kernel source code is but also where the source code for the installed programs are.
View 2 Replies View RelatedCan I use my USB instead of using my CD as software source? The USB contains all the files inside of the .iso package.
View 2 Replies View Related9.10 Bash shell.
Code:
Linux $ sudo source ./vars
sudo: source: command not found
Linux $ sudo . ./vars
sudo: .: command not found
[Code]....
Is there a guide on creating a package from PHP scripts or something? Example: if I've developed a system and I want to make it to a deb file to deploy to my friends and such. I've tried looking for one but I have not been lucky so far.
View 4 Replies View RelatedI was wondering if there were a way to use the apt-get -b source command and add CFLAGS and CXXFLAGS in order to build things with optimized code. Also, would it be possible to use Intel's ICC for compiling with apt-get -b source
View 1 Replies View RelatedOS: Ubuntu 10.04.
When I try to install some packages by aptitude, I see this:
Before it, I made it (sudo apt-cdrom add):
And it (sudo apt-get update):
My dvd-disk is not broken - md5 checksum is right. In sources.list I have only cdrom source, without any network repositories. When I install one package (for example pptp-linux) which don't use any depending, it work good, but when I have some group of packages - installed only first package from this group, you can see this in a first image, marked by yellow color and set to 16 percent.
I am trying to install audacious from a tar.gz. Here is the ./configure output
Code:
elliotn@elliotn-desktop:~/Desktop/audacious-2.3$ ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no .....
Configuration:
Install path: /usr/local
Use one plugin dir:
Allow user plugin dir: yes
Additional debugging output: no
Automatic character code detection: yes
D-Bus support: no
Session management (eggsm) yes
XSPF playlists no
SSE2: yes
AltiVec: no
WARNING! DBUS support is disabled. This means that various features the user might expect (such as remotely adding files to session via commandline) will not work! If I type make it dies make but I see nothing under sounds if I type make here is the output:
Code:
elliotn@elliotn-desktop:~/Desktop/audacious-2.3$ make
Entering directory src.
Entering directory libeggsmclient.
Successfully generated dependencies.
Leaving directory libeggsmclient.
Entering directory libaudcore .....
I'm still trying to learn, but seem to be hitting a few walls when it comes to man pages. I don't know where else to look so I hope to get some help here - or at least another idea. I'm trying to learn c++ as well as *nix terminal commands, and I like to make a backup of my compiled program and .c files each time I reach a successful compile (99-100% bug free).
My problem is I like to use an alias instead of a script to backup my work onto a USB. I don't want the hundreds of log files (10K+) copied since I usually delete them anyway.
My alias:
How do I tell cp to ignore the folder '~/work/log' during the backup?
If cp doesn't have such an option, I am open to other ideas, but I would still prefer something that I can alias since I already backup my .bash_aliases file.
installing compiz 0.9.0 from source
ive downloaded the source tar.gz from here,
but i do not know how to install it (USUALLY USE .debs, ppa, .sh
I don't have an active Internet connection at home, so I use my neighbor's computer with my live usb Lucid Lynx and install packages on it (the live usb). Can I take my live usb home and use it as a software source on my desktop to install the packages that I installed on the live usb? If I have to manually type in the source, what would be the syntax of the flash drive?
View 4 Replies View Related