I have a broadcom 4318 chipset for my wireless card, but after an upgrade to lucid my system was acting funny. I did a complete reinstall and all the issues are resolved except the wireless card. I would like to get the b43 module working instead of ndiswrapper. How can i do this right in lucid?
View 2 RepliesI've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.
View 7 Replies View Relatedi've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies View RelatedI'm running Fedora 12 LXDE spin on a netbook (Asus EeePC) and have successfully installed a wireless driver using ndiswrapper. The only problem is that every time I reboot, I need to use the "modprobe ndiswrapper" command to load the module.
Is there a way to load the ndiswrapper module during the boot process?
I have been trying to get this card working for a couple of hours without much luck. I was excited to find the thread, but it doesn't seem to work for me for some reason. [URL]. I tried the manual setup method listed, but nothing shows up in Network Manager under wireless cards? Is there something I have to do to get it to show up? I think everything copied to /lib/firmware/b43 for me ok?
Running /sbin/lspci -nn reveals the following:
03:03.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
I'm trying to help a friend with his Acer Aspire 5003 WLMi computer, and if you guys can't help me get this to work, I have to resort to reinstalling Windows XP on his computer.
I've tried with f34cutter and the Windows driver with ndiswrapper, and both ways should work (many others seems to have got it working), but I haven't.
I can't keep up with this much longer (he wants to have his laptop back someday), and I will post the relevant info as soon as you need it.
I have installed Ubuntu 10.4 (with all recent updates) on my hp nx6125 with broadcom bcm 4318. I have tried installing fw-cutter from synaptic package manager but it didnt show up on hardware drivers. Do I have to do something else as well with it?
View 1 Replies View RelatedI'm trying to install my pci wireless card that uses bcm4318 technology. I installed ndiswrapper and the driver for the card. However, I still can't seem to get wirelessworking. I'm not sure what info you will need to help me diagnose this problem. Here is the output of ndiswrapper -l:
rt2860: driver installed
I have this laptop, and I managed to find only the .sys and the .inf file for ndiswrapper.It worked, but it said that the firmware is missing. Was this supposed to be a .bin file?
I want to use Ubuntu on my laptop, but I'm really struggling.
I am trying to set up wireless on my desktop. It has no internet whatsoever, I could hook up ethernet but I would have to transfer the whole computer across the house. I installed ndiswrapper from the installation CD. I also installed NDISGTK which is some GUI with the ndiswrapper. I clicked Install New Driver, I am pretty sure I have all the other necessary files along with the mn710.inf, but I get the error:"Module could not be loaded. Error was:FATAL: Could not read '/lib/modules/2.6.35-22-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or directory"After clicking ok, it shows the driver there, but my card is still not working, no lights or anything. Does anyone know what that error is and how I can get it working?
View 1 Replies View RelatedI am trying to connect to my WEP enabled wireless network. I have a pci wireless card with chipset id 10ec:8190, and installed the driver (net8190p.inf) with ndiswrapper on Ubuntu Linux 8.10. I am able to connect when I disable WEP, so I'm sure that the driver is installed correctly and is working. I am connected now from XP with WEP enabled. How to get my Ubuntu distro connected here?
View 1 Replies View RelatedI'm trying to get internet set up on my grandad's laptop (sony pcg-f590), which has a fairly old pcmcia belkin 54g wireless card. I've installed the relevant bcmwl5a.inf driver through ndiswrapper, and for a time wireless worked so I installed updates through update manager. however after restarting the network manager menu comes up with "wireless networks disconnected" and no list of networks (I know there are because my laptop works and his is sitting next to the router!). The light is on on the network card so I know the laptop is talking to it. Unplugging and replugging the card does nothing, and neither does restarting again.
View 1 Replies View RelatedBefore I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
I've been using a RealTek 8190 PCI wireless card on my desktop in Ubuntu 10.04. The net819xp driver worked fine in ndiswrapper. Then my housemates got a new router and switched our wireless SSID & password. In network manager, I can see the SSIDs, but when I try to connect to our SSID, it continues trying to connect but never does connect. Something related to the router change and router firmware upgrade created this problem and i'm sure i need to fix it on my computer. All my windows7 flatmates are connecting with no problem. Right now I'm using my laptop, so i can't copy & paste results from terminal commands,
View 1 Replies View RelatedOk, I just upgraded from Slackware 13.0 to Slackware-current and now when I run modprobe ndiswrapper I get the following error.FATAL: Module ndiswrapper not found.Im not sure what happened on this. I did a search in google and couldn't find anything useful any help would be appreciated.
View 14 Replies View RelatedThis laptop arrived in the post yesterday and everything on f15 works out of the box except wireless.Digging out an old ethernet cable I was finally able to get wireless working by doing the following: First install ndiswrapper. We'll be using rpmfusion for this so you'll need to
[Code]...
After a reboot it all loaded and worked fine, just remember to make sure the little light on the f12 button is blue, not red. This guide should work for other laptops and other distros as well (though obviously you'll likely need a different driver file to start off with).
how to use the Sitecom WL-324 usb stick with ubuntu (10.10)? (It works with windows.)
lsusb | grep Ralink
Code:
Bus 002 Device 004: ID 148f:2878 Ralink Technology, Corp.Im using Ubuntu 10.10 x64 with a Phenom(tm) II X6 System My results so far:
sudo modprobe rt2870sta (or rt2800usb)
result (rt2870sta) :
lsmod | grep rt28
Code:
rt2870sta 445182 0
crc_ccitt 1699 1 rt2870sta
dmesg
[code]....
I installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.
[Code]...
I'm trying to configure ndiswrapper but when I run
Code:
modprobe ndiswrapper
it says
Code:
FATAL: Module ndiswrapper not found.
I know it needs usbcore so I run
Code:
modinfo usbcore
modinfo: could not find module usbcore
So How should I get usbcore working?
I updated to the latest kernel from Suse 11.2 repo. My wireless device won't load firmwares, ndiswrapper won't be a module anymore etc. :
Code:
inux-kqzq:/home/olivier/T l chargement/fwextract3 # modprobe ndiswrapper
FATAL: Module ndiswrapper not found.
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /usr -name ndiswrapper
/usr/sbin/ndiswrapper
^C
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /lib -name ndiswrapper*
/lib/modules/2.6.31.5-0.1-desktop/updates/ndiswrapper.ko
linux-kqzq:/home/olivier/T l chargement/fwextract3 # uname -r
2.6.31.12-0.2-desktop
2.6.31.12-0.2-desktop is uname
and 2.6.31.5-0.1-desktop is the module
Even though having already spent many hours trying to connect to the internet from Ubuntu, I still haven't done it succesfully. What I've done so far:
Code:
nuno@Houdini:~$ ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
bcmwl5 : driver installed
device (14E4:4318) present (alternate driver: ssb)
On the bar at the top, under 'Wireless Networks' it reads: "disconnected".
Just installed Ubuntu on my sister-in-law's emachines. Suddenly, her computer's not finding any wireless networks (although the other two Linux computers in the house find and connect just fine, as did her computer when it ran Windows).
~$ lspci
Code:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
[code]....
I want to preface by saying that I decided to try linux the first time earlier today, so I may not understand complicated replies.
I have a gateway MX6445 laptop, you can find all info about it here : [url]
I installed Ubuntu through Wubi from [url]
So far, I haven't tried to do anything but get wireless working, and failed at that. The wireless is much less intuitive than I would have guessed.
From looking at HOWTO post a wireless issue here is some information to read:
So, where should I start? Is it a problem with drivers or do I just not understand how to connect?
I installed Ubuntu 9.10 on my Acer 5024wlmi and followed this guide from Ubuntu community to enable my Broadcom AirForceOne BCM4318 wifi card.Now the wireless adapter is on (laptop front led also is on), I can see active wifi networks but connection fails (even with a simple ad-hoc open wifi network!). I tried with Network Manager/WICD/Wifi Radar and also using terminal lfconfig/lwconfig commands without success. It seems that my wifi card cannot ping access points: for example see this log from WICD connection session:
Code:
2010/01/16 22:51:15 :: Connecting to wireless network Winx
2010/01/16 22:51:15 :: /sbin/dhclient -r eth0
2010/01/16 22:51:15 :: ifconfig eth0 0.0.0.0
2010/01/16 22:51:15 :: /sbin/ip route flush dev eth0
code....
This is my first post! I am a brand new Linux fan and am determined to understand how this system works! I am running Fedora 11. My wired NIC works just fine. I am having problems with wireless. I ran lspci -v to find my driver details, found it online and got it working so it would show up in the network configuration. I am having problems getting it to work from there. I am used to getting windows to install the driver and then being able to search for wireless networks. When I try to activate it i get:
02:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. WL-138G V2 802.11g WLAN PCI Card
Flags: bus master, fast devsel, latency 64, IRQ 21
[code]....
I had Samba shares (a public folder and a printer) running fine on Jaunty 9.10, when upgraded to 10.04 it stopped working.
I've tried several tips and following different threads to no avail.
when I run smbclient -L localhost or else smbclient -L 127.0.0.1 I get:
Code:
session setup failed: NT_STATUS_NO_SUCH_DOMAIN
when I run smbclient -L TKA I get:
Code:
Connection to TKA failed (Error NT_STATUS_CONNECTION_REFUSED)
Here is my current smb.conf:
[Code]....
I installed samba4 but did't do any difference, so I uninstalled that. Reinstalled SAMBA and the config tool for samba several times. No difference.
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
I've got ubuntu (its google os but its the same as ubuntu) and I've tried millions of times to get my internet working. I've tried the ndiswrapper thing but I am not sure how to get and install it.
View 2 Replies View Relatedi'm really frustrated with ubuntu the last little while. i thought things would be better but its hard to stay optimistic when nothing works. My wife's laptop an MSI A6000-029US has an nVidia chipset [MCP79 (rev b1) according to lspci in lucid].i expected the RaLink RT3090 not to work out of box.. but the Ethernet controller for the wired connection doesn't work either.i can't get this thing online to update it. the syslog says:
Code:
Apr 30 04:13:39 msilappy NetworkManager: <info> (eth0): carrier now ON (device state 2)
Apr 30 04:13:39 msilappy NetworkManager: <info> (eth0): device state change: 2 -> 3 (reason 40)
Apr 30 04:13:39 msilappy kernel: [ 402.001626] eth0: link up.
[Code]...
Here's the dealy-o. Card is a Netgear, computer says it's a BCM43XG REV01.Card is functional but not working on my fresh Lucid install.Here's what it says:
p { margin-bottom: 0.08in; } derek@derek-laptop:~$ lspcmcia -v
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:0a.0)
Configuration:state: onready: unknown
[code]...