[code]...
to do administrating job by clicking "Adding Printers and Classes" or whatever. However, unfortunately, what I get today is
Iceweasel can't find the file at /usr/share/doc/cups/online-docs/admin.
So, click "Overview of CUPS" insted, then scroll halfway down, click "Administration" under Where Do I Begin? BINGO, you can proceed. My penguin is Debian squeeze AMD64.
When I want to update with synaptic I get this error:Ophalen van ts/Release is mislukt Unable to find expected entry 'iceweasel-5.0/source/Sources' in Release file (Wrong sources.list entry or malformed file)Some index files failed to download. They have been ignored, or old ones used instead.
View 2 Replies View Relatedcups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
installed lenny and am trying to install brother dcp7010 again:
1) i can't start CUPS server with /etc/init.d/cups restart "file not found", there is a cups@ link in /etc/init.d.
2) when i install dcp7010 cupswrapper
dpkg -i cupswrapperDCP7010-2.0.1-2.i386.de
it ends with
" lpinfo: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt
lpadmin: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt"
(connection to server not possible, refused)
3)[URL] doesn't work.
4)foomatic-gui can't find the installed dcp7010 lpr-driver
brdcp7010lpr-2.0.1-1.i386.deb, (a couple of days ago it did)
This is frustrating because it worked in etch and worked for awhile in lenny. The dcp7010-scanner does work.
I just discovered that using the web interface to CUPS on my localhost I cannot apparently, authenticate. The dialog pops up, but will not accept my root user name or any other. I tried using lppasswd to create add root, but it just keeps failing. Don't remember having this problem with F12, but I recently upgraded to F14...
I am unable to access cups admin via 631 port. Since I'm running non-desktop server I can't use localhost:631. In cupsd.conf I added a listen line for the client machine ip (the one I use to access cups) but no go. I also added Allow directives with this ip in the <Location> blocks. Nothing works. Cups server is running
View 3 Replies View RelatedI cannot navigate my windows network because of a unresolved issue.
see http://ubuntuforums.org/showthread.p...8#post11131098
The workaround is to use the IP address of the computers.
Problem is that CUPS has the printer address with the computer name as opposed to IP addresses.
CUPS will not let me manage the network printer. It asks for a user and password. My sudo name and password dont work.
I think the solution lies in the cups.conf but I am unsure how to fix it so that I can manage the printers.
I accidentally deleted one of the libraries in /lib or /usr/lib and now when I boot into Debian, it won't load the GUI. I get an error message saying that something failed because the library needed did not exist (I couldn't read it because the text was scrolling by so fast, so I don't know exactly what it said). I need to find an archive or something of all the system libraries for Lenny so I can reinstall them. Is there a place online where I can download them?
View 7 Replies View RelatedI can connect to the HTTP cups interface (localhost:631) but if I need admin priviledges, giving my id/pwd doesn't work. I don't see any "cups" group defined.
Otherwise, how do I enable a printer? I could disable it using the KDE printer management interface, but I can't re-enable it using same... Answer: /usr/sbin/cupsenable
My CUPS server has hung. Doesn't ask login user/pwd any more - goes straight to admin page. When I try to add printer I get an authorisation error. So unable to do any admin functions: add printers, disable Kerberos authentication etc.
View 1 Replies View RelatedI am attempting to connect my new Brother HL-2230 printer over CUPS. However, when I try to log in to http://localhost:631/admin it asks me for authentication. When I enter the user name for my administrator account (limao) and password, it reprompts me for my username and password again. using
Code:
# lppasswd -a limao
Enter password:
[code]...
I want to find a way to stream my home movies online, so that I can watch them anywhere. I want it to have a way to see all the movies I am streaming and just click on the one I want to play. It cannot be in flash format because of quality reasons. I'd rather it be able to support xvid or divx if possible because of its compression ratio. If not the movie would have to be no more then 1.4gbs a movie and still have good quality.
The closest thing I got to this was jinzora. I have also tried mediatomb (but I cannot figure out a way for vlc player to open the files without manually entering each link and I also cannot figure out a way for it to know at what point it is in the movie ex: 43:01/1:00:00). I am willing to use other formats if needed, but the size cannot be anymore then 1.4gb and still has to be good quality.
I logged on, opened the terminal an logged on as su no problem Could not open the document I wanted to edit. I am trying to switch from USB 0 to USB 1 so I can listen to my Bose Speakers used to be Windows tech. Many years ago.
How do I open the file edit the file save the file. can I log on as admin and use text editor.
A recent update to Iceweasel 5 (version 5.0-6 ) on my debian (Linux xxxxx 3.0.0-1-amd64 #1 SMP Sun Jul 24 02:24:44 UTC 2011 x86_64 GNU/Linux) led to a rather odd an annoying behavior. Each time I try to open an external file (pdf, odt) or to save a file on the hard drive, then Iceweasel crashes systematically. Does anyone experience the same? Any idea of how to fix this?
View 5 Replies View RelatedI couldn't find the kernel docs that go with 13.1. These docs would be the result of running this in the top-level kernel source dir.
make pdfdocs
make htmldocs
etc.
Are these not packaged? Are these built ever as part of a release or test cycle? Do any other slackers ever build these? I am seeing lots of errors from make pdfdocs "how much attention is given to DocBook on slackware?".
my Iceweasel always crashes when I attempt to open any file (usually pdfs, but I tried with .odt too). I only found this thread [URL] .... and commented out as told by MekkaGodzilla in /etc/gnome-vfs-2.0/modules/default-modules.conf Coment out this line : file:file
View 14 Replies View RelatedI have installed cups(1.5.3) in my Beagleboard black based custom hardware running on Debian 7.8 using 'apt-get install' command. I am trying to print to HP deskjet 1112 usb printer from system line but nothing is getting printed and the output of 'lpstat -t' shows the error : "/usr/lib/cups/filter/hpcups failed "
The error_log output is :
I [10/Nov/2015:09:44:51 +0000] Saving job.cache...
I [10/Nov/2015:09:44:52 +0000] Listening to [v1.::1]:631 (IPv6)
I [10/Nov/2015:09:44:52 +0000] Listening to 127.0.0.1:631 (IPv4)
I [10/Nov/2015:09:44:52 +0000] Listening to /var/run/cups/cups.sock (Domain)
[code]....
Please find the response from CUPS administrators below:
As far as I see this has nothing to do with CUPS.As far as I see the first error message comes from Ghostscript: "Unable to open the initial device, quitting" (this is in Ghostscript's gs_init.ps file).Therefore Ghostscript does not produce any output which lets then the filter from HP's HPLIP driver software error out with "cupsRasterOpen failed" and finally the HP backend errors out with "ERROR: null print job".Neither Ghostscript nor HP's HPLIP driver software belong to CUPS so that the issue does not belong to CUPS (according to my analysis).
I guess that somehow the "Ghostscript command line" is not correct or does not work as it should.Usually this is alos no bug in Ghostscript but "some where else" where the Ghostscript command line with all its parameters is created.
Winxp and Win7 - conencting to a Samba server.
Everything is working fine except for one thing .
To best explain this problem .........
Share name - "admin-public"
Everyone can access it.
Everyone can create new docs and edit / save them.
BUT - only the originator can edit / save.
Everyone else has read only access!
In 10.10, after installing samba and nfs through shares-admin, when adding a shared folder, i only see share through NFS listed, not samba
View 1 Replies View RelatedThere is this bug in the latest version of Ubuntu, which is also Jessie, which is:
Can't copy a file from SMB share to the local file system: Software caused connection abort
The problem, apparently, is that newer versions of Samba hit servers with multiple requests at the same time, and for some reason the Zyxel and Iomega boxes can't handle this. The best solution they've come up with is to modify the smb.conf file on your server to include this setting: "max mux = 1".
Here is the reference material on this bug: [URL] ....
People who develop samba have fixed it in the latest version but neither the ubuntu nor Debian have released the fixed version of nautilus, as of yet. Here, is the reference: [URL] ....
As soon as I get the hang of remastering, I am planning to remaster my distro (I have MEPIS 8 now, but will switch to either 9 or 11) to do two things: install KDE Trinity (I don't like KDE 4), and remove all extraneous software: games, "toys," and specialized programs that it was peculiar to include on the liveCD in the first place (such as jbidwatcher, a program for monitoring eBay bids). Oh, and I'll try to make it fit into one CD (not one DVD). Since I don't like downloading DVD-sized distros in the first place ( DVDs cost more!), I might download the latest antiX MEPIS and modify it to my liking.
If I successfully remaster a new version of MEPIS to my specifications, I might as well try to share it online in case anyone would want it. Where would I upload a Linux distro to share it?
Is it possible to use CUPs to share an already networked printer using IPP? The printer itself uses IPP.I know at first look this may seem like a silly thing to do, however I have a special case to set up a "print proxy server" due to security compliance reasons
View 1 Replies View RelatedI'm trying to make this script that can check if the computer is online using
Code:
ping -c2 $HOST | grep 'received' | awk -F',' '{ print $2}' | awk '{ print $1}'
and then run
Code:
gvfs-mount smb://address
to mount the share. The idea is to have it check every five seconds or something until it finds the connection. writing the script because I don't really know about programming.
I'm seeking recommendations for sharing photos and albums online, via Apache.
I once used a very good piece of software, written in PHP, which integrated very nicely with Apache, but I forgot its name completely; I though it was Stacy, but I couldn't find it.
I have realized that in not installing suggested packages I've missed out on a ton of doc files, which would really come in handy while I'm away from internet access.
Is there a way take a list of currently installed packages and find out which of them have doc packages available? Possibly install them in a single step? I have been playing around with aptitude and apt-rdepends, but I'm not quite sure how to go about this. Somehow take a list of installed packages, run it through an apt-cache search, and end up with a list of -doc packages to install? My bash-fu isn't the greatest, and I suppose this could be a bad idea to begin with.
What linux command would an administrator use to find all hidden files on a Unix/Linux server that were generated during the last week?
View 7 Replies View Relatedi just jumped into linux with both feet not having a clue what im doing.. loaded ubuntu 10.10.. liked it but i couldnt get stellarium to work with my ati x1300, so i upgraded to 11.4 and it works fine.. problem is.. i have a applications start on the left side, but i cant seem to find the setup like in 10.10 at the top, where you can go to terminal, admin, synaptic, etc.. the only way i found synaptic was trying to download it and asked me if i wanted to keep it in the bar, so now its on the left, but cant find anything else.. ive been trying to find it on the net but 11.4 seems to be so new that there arent very many faqs or tutorials about it..it would be nice if i can get that stuff back without having to format and reinstall 10.10.. im not going back to windows.. so i might as well figure this out..
View 2 Replies View Relatedi have a tutorial question to do and don't know where to start, the question is install a workable nfs fileshare system between your system and a remote system, using optimum values for rsize and wsize
View 1 Replies View RelatedI have a LAN of about 70 computers that I would like to share media files between. I have gotten to the point with Samba that I can view the files without a username/password from client PC's. I would like to make all the folders read only except for one which will be writable for everyone. The thing that I am having a hard time with is allowing a couple of administrators (on Windows 7 machines) read/write access for all files/folders. I am completely new to Ubuntu and Samba so please make explanations thorough. Here is /etc/samba/smb.conf file:
[Code]...
I'm new to linux, have been somewhat of a computer geek my whole life and thought it about time that I delved into the world of linux. So I installed ubuntu 10.04 on my computer. I love it. However, I can't get my wireless to work. In my dorms there are no ethernet hookups, so I have to use the wireless. I typed "sudo lshw -class network" into the root terminal. The important things that I figured out was the bus info: pci@0000:4:06.0 and the pysical id: 6 (not sure if the physical id is important but it sounds like it is). I then did a lspci and found that at bus 04:06.0 it is a RaLink Device 3060. I downloaded the .tar file for the driver. I could not find instructions for it online so I followed the ones for the rt2860 driver : [URL].... I could not get it to work, It built ok and installed ok, but when I do the modprobe I get an error saying the device or resource is busy. Either that or that it cannot be found. One thing that I found weird was that I couldn't get it to build a 3060 driver, it would only build a 3562 one.
View 3 Replies View Related