how can i do user2 can't get the file /home/user1/www/wp-config.php by using an editor but the webserver can?i mean how can i disallow access on other user's directorys but allow only one? (www-data in case).
View 7 RepliesI've downloaded configuration files for my VPN, Kovurt, and they don't have a .ovpn file extension. Further, when I tried to enter the information manually (using this guide), I saw that the files only include the <ca> tags, and no <cert>, <key> or <tls-auth> tags.
Here is the content of one of the config files, simply named 'Tokyo' with no extension. (adding .ovpn didn't work either):
Code: Select allclient
dev tun
proto udp
remote 50.31.255.86 443
resolv-retry infinite
nobind
[Code] ....
I have an open ticket with Kovurt asking for the other info, but I know already that they don't have much in the way of documentation or support for Linux.
I have 2 windows pc's in my home and an office computer that have my files strewn about. I wanted to have them all in one central location that keeps a backup copy, so i used an old machine to start building a file server. I installed debian 5.0 on the machine, command line interface only. I have gotten ssh working so that i can do all my work on the box from one of my windows pc's by logging in with putty.my current problem is how to easily use the box hard drive for storing my files in an easily accessible way. i'm still working on getting samba to work so that i could map the /home directory to a drive letter on my two home pc's, but i'd also like to access files from my work pc. Before i do that, though, i wanted to know if this is safe and secure to map a drive on a remote machine through the internet? Are there any other security concerns I need to be addressing by having this file server set up?
View 7 Replies View RelatedI am using Ubuntu 9.10 and I lost my sudo accesses for the User. So I am not able to use sudo command as I get the error,user1 is not in the sudoers file. This incident will be reported.Also I tried to login into the root usersu rootit will ask for the password(actually I dont know the password of root but after pressing enter I get the following error)su: Authentication failureI dont know how to add the user1 into the sudoers list.Also, is there any way to add the current user into admin group without using "sudo".
View 1 Replies View RelatedI have just installed Debian Weezy and for some reason it just does not see my router.1) is there a good network config script I can use?if not then what files must be edited to setup the network?When I attempt to ping the router, it does not see it. I have checked the cables etc.
View 6 Replies View RelatedI am having trouble using touch pad in jessie. My touch pad was ok when it's in wheezy but after i updated to jessie, i can't really get used to it.
I don't know whether i setting it up wrongly, sometimes, my touchpad will keep dragging, without releasing. And if I click the bottom right of the touch pad, it's not right click; instead i have to use two fingers.
etc. So how can i change to back to a more traditional usage? Also, do jessie have a setting like ubuntu saying disable touch pad while typing?
I'm trying to set up my Intel Wireless 3945ABG (which is supported in the kernel) and I don't understand where to start if I want to use systemd to do this.
I've installed my Debian (Stretch Alpha4) base system using the wireless to download the necessary components but when I boot into the system I need to set up the wireless card separately.
I would prefer to be able to install wireless without the requirement of connecting via ethernet so no package installs other than what is downloaded by the installer.
I can't even find documentation on this specific issue because everyone seems to reference /etc/network/interfaces which AFAIK is not supported in systemd. How do I configure a wireless card using only systemd?
Running natios server in Debian 8? I cannot start nagios3 demon, it got following error:
Error: Check period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
Error: Notification period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
But if I commented following statement in generic-service_nagios2.cfg, it works just fine.
# check_period 24x7
# notification_period 24x7
Can I use the config for my current kernel (the jessie 3.16 one), and use it to build a more recent kernel (3.18)? Do I just copy across the config and try and build with it, or is there some tool that will bring across the existing config but also set up reasonable defaults for any new options in the newer kernel, and any other migrations that might need to be applied?
View 4 Replies View RelatedI'm recompiling my kernel on a dell latitude c600 running lenny as I type, and it's taking forever, so far upward of 4 hours.I think I'm getting drivers for ever piece of computing hardware since the univac So I googled "a kernel conf creator" and got [URL]... Its a nice, clean method for finding what hardware your using... you just run lspci cpuinfo make xconfig and put in all the info yourself. So I was thinking: this is exactly the kind of dull, repetitive behavior that computers were made for. Is there a program that can find my hardware info, and make the.config itself, with very little user input?Or should I reinstall debian on another partition and steal the .config from it? Or should I man it up and do it myself?
View 14 Replies View RelatedI installed the Gnome desktop CD1 AMD 64 version of Debian Squeeze. I installed samba and python-smbc. I am missing samba printers in my system-config-printer. Anyone know why? [url]
View 2 Replies View RelatedI know very little about Debian but have an ASUS T100TA tablet which runs fairly well under Debian 8 Jessie (kernel 3.16.0-4-686-pae). I used the following guide successfully to activate the wireless but am having trouble with the audio section of it.URL...
First, I went here and downloaded the file called 'NEW T100_B.state'.URL....
Then I copied it to /var/lib/alsa/asound.state and ran 'alsactl restore' which reported that i had no soundcards.I then downloaded and expanded linux-firmware-master-intel.tar.gz but am not sure what to do with these files. I copied them to /lib/modules/3.16.0-4-686-pae/kernel/drivers/firmware as they are specific for this kernel, but they don't seem to be doing anything and 'alsactl restore' still tells me that I don't have a soundcard. What do I need to do with these files?
I installed debian 6 (stable) on laptop with dual boot Windows 7 and Debian. when i was installing debian ,every things were ok and installed correctly (such as DHCP configuration) before installing APT package configuration part. error is about mirror zone! i checked it and tested with all mirorrs in list but i couldnt config APT yet.i did installation without APT.after booting debian i have apt-get and aptitude commands but didnt work commands like apt-get update or aptitude install ... or aptitude update .... when i ping an ip , it dosent answer cause of errors .(but i have network connection on windows7 correctly. im using connection wired.
View 1 Replies View RelatedI'm currently dual-booting Squeeze & Windows XP on a machine i use frequently.
In my experience on the desktop, i now see no reason to have Windows XP as a boot option, & wanted to try & avoid a full re-installation of Debian in order to remove XP (merging it's partition with / ).
I have a checklist that i put together, but wanted to be sure this was all correct before going forward.
1. Perform full back-up of all data.
2. Boot into Debian, through GUI -
System Tools > Disk Utility
- Select HDD (80GB Hard Disk)
- Select windows partition ( /dev/sda1 )
- Format /dev/sda1 to Ext4 Filsystem
3. Boot Live CD
- Use gParted to extend /dev/sda2 (was 38GB, will extend to 78GB)
4. Remove XP from the boot menu.
( Note: My ~ folder is on the same physical drive as / (same volume), but i actually store all Media on a separate physical drive which is formatted in NTFS. I plan on reinstalling XP using a virtual hard disk, & sharing that with the virtual machine.Here is a screenshot of my Disk Utility - [URL]
I have a Jessie with grub2. I've bought ssd and copied root partition onto it. I've also installed grub on this disc. I would like to have dual boot:
- First option: old root booted from hdd
- second option: boot from copied ssd and use root from it.
So i would have two identical but independent configurations.
Both disc has different uids (changed after cloning).
I had a hope that i will change fstab to mount root partition from ssd, but it doesn't work. I need to change grub configuration, but how to add new position?
There is also problem that bios doesn't allow me to choose disc to boot from. So i would rather prefer to change grub configuration for dual boot from different disc.
I run a network with about twenty Debian systems, currently running Etch. I maintain a central passwd and group file, which is regularly copied to each system. This works fairly well, but I have some problems with the system account UIDs and GIDs.
I find different systems often pick different UID and GID values for system accounts like bind, ntp, sshd etc. I think the values chosen at install come from the system UID and GID ranges, and are allocated sequentially, so the values on a system depend on which packages were installed, and the order they were installed in.
Is there any way to specify the UID and GIDs for system accounts at installation time? Are there any other thoughts on how to implement shared passwd and group files (apart from NIS, which I don't want to use)?
I want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
After an automatic update from Debian I get the following error while starting a root terminal:
An error occurred while loading or saving configuration information for gnome-terminal. Some of your configuration settings may not work properly.
Failed to contact configuration server: the most common cause is a missing or misconfigured D-bus session bus daemon.
I've installed RIPIT 3.6.0-1 for Lenny and have been following this tutorial to define a config file that saves all my options and which I can call every time I want to rip a CD [URL]
Following that tutorial I copied the config file in etc/ripit/config to the new director ~/.ripit/config. The new directory and file exist as I can see them when I do ls -a and can edit the new config file.
However when I type the command ripit all I get is the error message No config file found!
i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies View RelatedAt home I have two computers running linux connected to the same router. I would like to be able to connect them so that I can move files between them and execute simple commands. What is the most simple way to access a prompt on the other computer or to mount a partition currently used by the other computer?Using the www it is possible to connect two computers using ssh, but it should be easier to do this over the LAN, right? I have been googling a lot but not found anything.
View 10 Replies View RelatedI wonder do we need firewall for home pcs at all?I mean, fine, for servers and stuff, but I have my own laptop station. People have different position on this issue.
View 14 Replies View RelatedI have the partition like below. Now i want merge the /home partition into /dev/sda1 partition .
[Code]...
I want encrypt my home folder by using the DES? How to do it?
View 1 Replies View RelatedI have one of my user's home directory on a seperate partition, and I was wondering if there was a way to only mount it when/if the user is logged in and unmount it if they log out.
View 1 Replies View Relatedis it possible to mount a truecrypt file container as a home directory before login, if so how to do that?
View 3 Replies View RelatedI recently bought a new hard disk for my /home tree. I don't have encrypted home directories currently, but I was wondering if there is an easy way to encrypt my home directory so that it is automatically decrypted when I'm logging in (console/kdm). Basically I would like to manually do same thing as Debian installer would have done.
I'm running Squeeze.
How apt-file works.
Background: I (like somebody else) needed to figure out which package wx-config is in.
Code:
Question: Which package makes a link?
Also why wx-common NOT depends on libwxgtk2.6-dev.
I was running 2.6.26 and I've recently upgraded to 2.6.32-trunk-amd64 along with other packages (mostly dependencies)... which possibly involved the network stack.
After this upgrade my home gateway stopped working and I'm clueless to where the problem may be.
I can see that the iptables are still there when I type:
iptables -t filter -L -v -n -x --line-numbers
iptables -t nat -L -v -n -x --line-numbers
I recently reinstalled Lenny and I am attempting to save my /home directory. I used the graphical install and when it came to the part about partitioning, I created a new /home partition "hdb1" and told the installer to ignore my old /home partition "/dev/hda9".Following the completion of the install, I logged in and changed my /etc/fstab so that /home --> my old /home partition "/dev/hda9". I then mounted the old partition to /home and rebooted the system. Now, when I go to my /home directory >> properties, I can see that the files I had are on the drive (2GB are used) --- but --- I cannot actually see the files??
View 1 Replies View Related