Debian Multimedia :: Get Analog Input Through PCHDTV Card HD-5500?
Oct 10, 2010
This week I got a TV card partially working in Squeeze. It is a PCHDTV HD-5500, sold for use with Linux [URL]. It has a Conexant chipset and open drivers. The drivers are already in the current (Sept/Oct. 2010) Squeeze kernel, 2.6.3x.
TV reception is working with Xine and VLC (probably would be fine with mplayer too). My question is, how do I get video from the inputs on the back of the card?
There's a multi-thing that takes inputs from composite or S-video. I have one of those digital-to-analog boxes from the US TV conversion, and its composite output is plugged into the composite input of the card. Looking at the players, however, it is not obvious which device (or other input) to choose, or what settings should be. How can I make a player get the video from the plugged-in analog source?
View 1 Replies
ADVERTISEMENT
Nov 23, 2010
Alright, just installed maverick, got the sound to work great on the 7.1 with pulseaudio. works great in movies, and everything else just wonderfully. the only thing i am stumped by is how to get the sound to loop from my digital input on my soundcard to my analog speakers also on the same soundcard. i know the sound feed works on the input as the makeshift VU meter/bar on my digital input in the sound preferences moves, but i can't get the sound to actually come through on my speakers.
View 1 Replies
View Related
Aug 15, 2010
Ever since I upgraded to Slackware 13.1, my previously functional pcHDTV card worked fine. Since the upgrade, however, I get nothing from tvtime except a blue screen and "No Signal."
I saw this thread, which led me to try rmmod'ing related modules for video4linux and my card, but modprobe'ing everything back in didn't solve the issue.
View 2 Replies
View Related
Jun 20, 2010
Using an ATI Tv wonder HD 600 card, and i'm trying to use it to view an analog signal through the coax input. Normally, I'd tune the tv to channel 3 and be done with it. I'm not really sure how to proceed with it.
Code:
scan /usr/share/dvb/atsc/us-NTSC-center-frequencies-8VSB doesn't pull in the correct input, and i'm not sure that non-digital inputs are even supported.
View 3 Replies
View Related
Jun 4, 2011
My problem is on bootup and shut down I get: analog input cannot display this video mode. I've got a dell monitor nvidia graphics card. Don't really know how to provide much more info than that. From what I've searched on the net is that it probably has to do with the refresh rate.
View 4 Replies
View Related
May 15, 2010
I've bought a Compro M1F PCI Analog TV Tuner. It works fine in windows (xp and 7) but it doesn't work under Debian Lenny. TVTime shows a blue screen with no image or sound. What steps should I follow to see if this card can be configured correctly with my Debian box?
View 1 Replies
View Related
Mar 22, 2010
every time I want to listen music from my headphones I have to do like:
1. Main menu >> System >> Preferences >> Sound >>> Output >>>> Connector >>>>> Analog Headphones
and vice versa.
I have no experience in bash scripting and I have no idea how to find automatic solution to my problem.
The problem in pseudo-code:
Begin
if
headset plugged in front jack
then Connector := Analog Headphones
else
Connector := Analog Output
End
View 9 Replies
View Related
Nov 30, 2010
I'm thinking of getting a new multiple input sound card for my PC running 10.10
I want to be able to record at least 4 channels simutainiously and have good drivers in Ubuntu for it.
View 5 Replies
View Related
Mar 21, 2009
I am having trouble getting my USB-Dvb-Analog-Hybrid-TV-Card running with openSuse 11.1. (I already tried a lot of instructions I found on the net but none of them worked.) For example, when I try to install em28xx-new, compiling will work, but when modprobeing:
[Code]....
View 4 Replies
View Related
Mar 21, 2010
I am using ubuntu 9.10 (kernel 2.6.31-9-rt) and an M-Audio Delta 1010 PCI sound card, and trying to get MIDI inputs and outputs to work on this sound card.I have Jack installed and working. MIDI signals from virtual keyboard or a MIDI player can be routed to fluidsynth, and fluidsynth's audio can be played back through the outputs of the delta 1010.I can use a MIDI sequencer (e.g. rosegarden or qtractor) to record MIDI from virtual keyboard, with jack handling the routing.
But, no matter how I configure the connections in jack, I can't get any signals from the "MIDI In" port on the sound card.Does anybody have some thoughts on how to fix this? Where is the disconnect between the delta 1010 and qtractor? I am concerned also that the "MIDI In" LED on the front panel of the Delta 1010 never blinks. There must be some basic ALSA configuration that needs to be done to activate and use these MIDI ports, or something. I've been trying to figure it out for days.
View 3 Replies
View Related
Feb 13, 2011
I am currently trying to start doing some screen casting and having a problem with audio recording in gtk-recordmydesktop. The problem is that I need to record both; my computers audio card output, and my mic input at the same time. As of now I am able to record one or the other.
View 4 Replies
View Related
Nov 27, 2010
I just started messing around with openSUSE 11.3 (64-bit version, KDE environment).
My desktop computer has an internal fax/modem card (PCI version, mod. USR5610C). I am very confident that this card works with Linux and U.S. Robotics guarantees that much on their web site.
I connect to the Internet via DSL but I am attempting to set up the internal analog modem card as a back up should the DSL line be temporarily down. I went to YaST -> Modem and I see that my card was detected as "U.S. ROBOTICS 56K FAX INT Modem Not configured". I pressed Edit and the Modem Parameters page says that the device is in "/dev/ttyS4". I am not sure that this is indeed where the modem is located (is there a way to make sure?) but I accepted it and proceeded to entering the name of my Internet service provider, the access phone number, user name, and password. So far, so good -- I think!
Eventually, I come to a window where YaST2 wants to install the following:
* jack Jack-Audio Connection Kit v. 1.9.5-2.8
* smpppd SuSE Meta PPP Daemon v. 1.60.46-1.1.1
So far I have not installed them because of the Jack-Audio Connection Kit software. Do I really need to install it in order to get the modem working? The reason I am being careful is that I just spent weeks and weeks in trying to get my audio card (ASUS Xonar DX 7.1, PCI-E) to work with openSUSE and I sure do not want to mess things up and start all over again!
How to set up an analog modem with openSUSE 11.3?
View 2 Replies
View Related
Mar 29, 2010
I got a problem with tv card...i just instal tvtime program for watching analog tv station, but i cant see nothing, this is snapshoot from info about card.
[url]
and from tvtime program
[url]
View 1 Replies
View Related
Oct 13, 2010
tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies
View Related
Feb 23, 2010
I'd like to try transcribing a few of my old vinyl records to my ogg player for the car. But which application to use? Sound Recorder is there in the default install of course, but it doesn't seem to have any kind of level meter in it. I have used audacity in the past, but maybe that's overkill.
The sticky howtos don't seem to mention anything as basic as this question. Which application would you recommend?
View 2 Replies
View Related
Jul 18, 2010
I could effortlessly set my output in Sound Preferences to be Analog 5.1. Now I just discovered that this option has disappeared, for no apparent reason. I haven't been messing around with any settings, other than installing updates as they've been rolled out. Would be nice to have 5.1 surround back as an option.
View 1 Replies
View Related
Sep 11, 2010
ive been making the switch over to ubuntu from Vista and one of the last things in my way is getting my M-audio 1010lt card working in ubuntu (9.10, 64bit). I set it up so that the maudio card is the primary card and in envy24control the digital mixer shows sound, and i turn up all of the sliders (and unmute) but nothing happens noise wise.
I went into the "sound preferences" gui and was able to disable the internal sound card. It lists: ICE1712 [envy24] PCI Multi-Channel I/O Controller 1 output/ 1 input the top part is fine, but the 1 in/out is wrong. I should have access to 10in/out. Additionally, in the "settings for the selected device" drop down menu, there is no choice to select analog stereo to analog outs 1/2. How can i get the analog output in this drop down menu or find some other way to get sound working??
View 1 Replies
View Related
May 4, 2011
I've looked everywhere for this and I can't find an answer. I've got a hauppauge wintv-1250 card; ubuntu and mythtv recognize it OOTB. The dvb digital tuner portion of this card works great. I had quite a time figuring out how to set it up, but it all works pretty good now. nyway, the only problem is that I need to record 2 sources: 1 is RF, the other is from an analog cable box. So, I figured I should be able to record analog video from the s-video input. Is this possible with mythtv, and if so, how? I could watch it in windows with the software that came with the card, so I know it's possible, but I'd rather avoid windows if I can.
View 1 Replies
View Related
Aug 12, 2011
For some time, my microphone input doesn't reach the recording application, but instead goes directly to the loudspeaker. If I make a sound in the microphone, it will go to the loudspeakers, and Audacity or Skype will not "hear" anything (and of course, with this set-up, there's a constant noise in the loudspeaker, coming from the microphone).This problem goes away if I install PulseAudio. So obviously, there's nothing broken with either of ALSA or hardware, only some misconfiguration somewhere, and PulseAudio can make a sense of the mess. Playing with all sorts of configurations in Alsamixer didn't help.
Unfortunately, I don't want PulseAudio, because it causes output problems which are a bit too subtle for me to describe coherently here. So I'd rather fix ALSA than Pulse.Please direct me into how to investigate this. The OS is Debian Unstable, the audio card is an integrated Intel ALC1200.
View 1 Replies
View Related
Nov 4, 2010
I recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.
I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.
In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).
Something interesting, though, if I do this:
Code:
arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null
it works correctly and outputs on both channels. But if I do
Code:
arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null
then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.
The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.
The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.
I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?
View 1 Replies
View Related
Oct 23, 2010
I'm trying to get my Audigy 2 Value to output digital but when I try to use the iec958 interface it outputs to the front speakers analog outputs, ie not the digital io socket.
I can get 5.1 surround by using the plug:surround51 device.
Have gone though other guides trying to fix the problem but no luck. how to get the digital stuff working. I have included some outputs.
Code:
Code:
View 3 Replies
View Related
May 1, 2010
I installed Lucid. I used to have Ubuntu 9.10 and to connect my iPod to my laptop's speakers. There was an option in 9.10 in the Sound Options to change the Mic Input into a Line Input. But now unfortunately I can't find it in Lucid have only 2 audio ports in the laptop: Headphone port, Mic port.
View 9 Replies
View Related
Jan 19, 2014
I've tried installing both ibus-anthy and ibus-mozc in Jessie but I still cannot input Japanese.
By contrast, In Wheezy, when using anthy for example, I can see ibus preferences icon where I can configure ibus and anthy. This doesn't show up in Jessie.
View 12 Replies
View Related
Mar 21, 2010
I am not able to play certain encrypted DVD's under Lenny. Some of these DVD's worked fine in a previous installation (Mandriva 2008.1) in the same laptop (nx6125). I tried with several players (Kaffeine, vlc, mplayer), but nothing works. I know that the DVD drive is OK, since I was a able to watch an unencrypted DVD. I also have libdvdnav4, libdvdread3, libdvdcss2, w32codecs already installed.
This is the error message from Kaffeine:
07:06:12 PM: xine: cannot find input plugin for MRL [dvd:///dev/hdc]
07:06:12 PM: xine: input plugin cannot open MRL [dvd:///dev/hdc]
07:06:11 PM: xine: found input plugin : DVD Navigator
And this is from vlc
tommy@tardis:~$ vlc dvd://
VLC media player 0.8.6h Janus
libdvdnav: Using dvdnav version 4.1.2 from [URL]
libdvdnav: DVD Title: DVD_VIDEO
libdvdnav: DVD Serial Number: 2E904DAF
libdvdnav: DVD Title (Alternative):
libdvdnav: Unable to find map file '/home/tommy/.dvdnav/DVD_VIDEO.map'
libdvdread: Invalid main menu IFO (VIDEO_TS.IFO).
libdvdnav: vm: failed to read VIDEO_TS.IFO
libdvdread: Invalid IFO for VMGM (VIDEO_TS.IFO).
libdvdread: Error cracking CSS key for /VIDEO_TS/VIDEO_TS.VOB (0x00000180) .....
[00000277] dvdread demuxer error: read failed for block 0
[00000270] main playlist: nothing to play
View 9 Replies
View Related
Dec 28, 2010
SOUND from analog Capture is out of sync in Pinnacle Studio 14.
[code]...
This problem can occur during capture from an analog capture card if CPU utilization exceeds 95 percent. To avoid this problem, configure virtual memory to be "System managed" by following these steps:
1. Choose Start -> Control Panel.
2. Open the System control panel.
3. Click the Advanced tab.
4. Click the Advanced tab.
5. In the Virtual memory box, click Change.
6. Select System managed size, and click Set.
7. Click OK.
View 1 Replies
View Related
Nov 13, 2010
There used to be a selector where you could set which microphone or line input should be used in KDE 3 (Kmix).
Now, in KDE 4 it is gone and I cannot figure out how to set it. i.e. to change from using an external mic to the internal mic.
View 1 Replies
View Related
Oct 3, 2010
I'd like to be able to record what's playing on my sound card. How do I do this, with audacity or whatever? There seems to be little information around and what of it I've tried has got me nowhere
View 2 Replies
View Related
Apr 30, 2015
I inserted another graphics card to my computer to use 3 monitors. The card appears in lspci but I can't access it in gnome.
What do I have to do to set this up.
Here is the output of my xorg.log: [URL].....
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 XT/X1650 GTO]
View 7 Replies
View Related
Apr 2, 2010
I can only hear sound from my front speakers but not from the rear ones. And everytime I reboot I have no sound and manually have to do 'alsaconf'.For information about what I have done: I have only 'su' to root and put 'alsaconf'.It detected my soundcard and the sound works but only the front ones. As I am new to debian(I have installed debian lenny), I would greatly appreciate any help as to what should I do.On googling around I found that I have to edit some "asound" file.
View 11 Replies
View Related
Jul 6, 2010
I have currently gotten my onboard sound working after some tousling and trial (Intel ICH5), but my beloved Audigy remains without breath. I've been around on the KDE forums thinking that it had to do with Phonon after it permanently forgot my sound cards (a feature which enables permanent sound removal too easily, in my opinion), and the admin pointed me toward my distro's forums.
Here's some info:
[code]...
with some meaningful output, but, after a reboot, still no sound with speakers plugged into the Audigy.
2nd NOTE: I have just found this:
[code]....
The driver in use is NOT the emu10k1 driver, which I believe should be the one according to the alsa soundcard matrix. How do I load the proper driver upon boot?
View 7 Replies
View Related
