Ubuntu Multimedia :: Maudio 1010lt No Analog Settings?
Sep 11, 2010
ive been making the switch over to ubuntu from Vista and one of the last things in my way is getting my M-audio 1010lt card working in ubuntu (9.10, 64bit). I set it up so that the maudio card is the primary card and in envy24control the digital mixer shows sound, and i turn up all of the sliders (and unmute) but nothing happens noise wise.
I went into the "sound preferences" gui and was able to disable the internal sound card. It lists: ICE1712 [envy24] PCI Multi-Channel I/O Controller 1 output/ 1 input the top part is fine, but the 1 in/out is wrong. I should have access to 10in/out. Additionally, in the "settings for the selected device" drop down menu, there is no choice to select analog stereo to analog outs 1/2. How can i get the analog output in this drop down menu or find some other way to get sound working??
View 1 Replies
ADVERTISEMENT
Mar 8, 2011
I have just gotten unbuntu install and was force to learn cuase while installing i accidently messed up the part of windows it needs to start i think on another hard drive.
i dont mind anymore. its a easy learn but now i down to the nitty gritty stuff.my audio outputs. i have a biostar board with reltek onboard audio.board model: TF8200 A2+ now i am just looking for a way to manage what one of the 6 ports do what.. like before in windows 7 with the realtek program. i could make every single on back their all fronts. or all line ins. or anything in between.
i dont really no what else to say. what ever other info you need just ask and ill reply fast.ps Ubuntu is awesome. its so slick with compiz and conky is nice to. only other problem i have now is music manager/player/mp3 sync. anyone know a good program off the top of your head?
View 2 Replies
View Related
Mar 22, 2010
every time I want to listen music from my headphones I have to do like:
1. Main menu >> System >> Preferences >> Sound >>> Output >>>> Connector >>>>> Analog Headphones
and vice versa.
I have no experience in bash scripting and I have no idea how to find automatic solution to my problem.
The problem in pseudo-code:
Begin
if
headset plugged in front jack
then Connector := Analog Headphones
else
Connector := Analog Output
End
View 9 Replies
View Related
May 2, 2010
I'm pretty much an Ubuntu noob and I'm about to give up. I've spent hours reading tips and tricks to get this sound card working but I usually end up making things worse. This will be my last attempt
- onboard sound is disabled in BIOS
- Delta 1010LT is recognized
- fresh Ubuntu 10.04 32bit install . . . everything is default.
- I know how to access the terminal and for argument's sake, let's say that's it. I need step by step.
I tried to remove all instances of pulse audio in the past and it removed the desktop as well. Talk about frustrating. Ok, so here I am. Fresh install, no sound and I haven't touched a thing.
View 9 Replies
View Related
Oct 14, 2010
I'm not too experienced on Ubuntu, but I'm trying to get a Delta 1010LT working on Ubuntu 10.04 minimal install (no gnome, only console).I can see the board detected using lspci, but looking at dmesg output I get the following:
Code:
[ 31.116668] ICE1712 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 31.116709] ice1712: Using board model M Audio Delta 1010LT
[ 31.135560] invalid CS8427 signature 0x0: let me try again...
[code].....
if a change the model to delta1010 the driver is loaded correctly, but I assume there are major differences between the two boards so I don't get audio out, even if I unmute everything using alsamixer.Motherboard is an Intel D510MO with onboard audio disabled.
View 1 Replies
View Related
Apr 4, 2010
I'm using 64bit Ubuntu 9.10 and my sound card is not working. I'v tried to install oss drivers, but there is no effect.
View 1 Replies
View Related
May 27, 2011
How can I get pulse audio to see my M Audio1010LT sound card. No problem with Ardour and Hydrogen with my sound card but there is no sound for my films and music. Don't know what to do...My OS is Ubuntu 11.04.
View 1 Replies
View Related
Feb 23, 2010
I'd like to try transcribing a few of my old vinyl records to my ogg player for the car. But which application to use? Sound Recorder is there in the default install of course, but it doesn't seem to have any kind of level meter in it. I have used audacity in the past, but maybe that's overkill.
The sticky howtos don't seem to mention anything as basic as this question. Which application would you recommend?
View 2 Replies
View Related
Jul 18, 2010
I could effortlessly set my output in Sound Preferences to be Analog 5.1. Now I just discovered that this option has disappeared, for no apparent reason. I haven't been messing around with any settings, other than installing updates as they've been rolled out. Would be nice to have 5.1 surround back as an option.
View 1 Replies
View Related
May 4, 2011
I've looked everywhere for this and I can't find an answer. I've got a hauppauge wintv-1250 card; ubuntu and mythtv recognize it OOTB. The dvb digital tuner portion of this card works great. I had quite a time figuring out how to set it up, but it all works pretty good now. nyway, the only problem is that I need to record 2 sources: 1 is RF, the other is from an analog cable box. So, I figured I should be able to record analog video from the s-video input. Is this possible with mythtv, and if so, how? I could watch it in windows with the software that came with the card, so I know it's possible, but I'd rather avoid windows if I can.
View 1 Replies
View Related
Oct 23, 2010
I'm trying to get my Audigy 2 Value to output digital but when I try to use the iec958 interface it outputs to the front speakers analog outputs, ie not the digital io socket.
I can get 5.1 surround by using the plug:surround51 device.
Have gone though other guides trying to fix the problem but no luck. how to get the digital stuff working. I have included some outputs.
Code:
Code:
View 3 Replies
View Related
Dec 28, 2010
SOUND from analog Capture is out of sync in Pinnacle Studio 14.
[code]...
This problem can occur during capture from an analog capture card if CPU utilization exceeds 95 percent. To avoid this problem, configure virtual memory to be "System managed" by following these steps:
1. Choose Start -> Control Panel.
2. Open the System control panel.
3. Click the Advanced tab.
4. Click the Advanced tab.
5. In the Virtual memory box, click Change.
6. Select System managed size, and click Set.
7. Click OK.
View 1 Replies
View Related
May 15, 2010
I've bought a Compro M1F PCI Analog TV Tuner. It works fine in windows (xp and 7) but it doesn't work under Debian Lenny. TVTime shows a blue screen with no image or sound. What steps should I follow to see if this card can be configured correctly with my Debian box?
View 1 Replies
View Related
Nov 23, 2010
Alright, just installed maverick, got the sound to work great on the 7.1 with pulseaudio. works great in movies, and everything else just wonderfully. the only thing i am stumped by is how to get the sound to loop from my digital input on my soundcard to my analog speakers also on the same soundcard. i know the sound feed works on the input as the makeshift VU meter/bar on my digital input in the sound preferences moves, but i can't get the sound to actually come through on my speakers.
View 1 Replies
View Related
Oct 10, 2010
This week I got a TV card partially working in Squeeze. It is a PCHDTV HD-5500, sold for use with Linux [URL]. It has a Conexant chipset and open drivers. The drivers are already in the current (Sept/Oct. 2010) Squeeze kernel, 2.6.3x.
TV reception is working with Xine and VLC (probably would be fine with mplayer too). My question is, how do I get video from the inputs on the back of the card?
There's a multi-thing that takes inputs from composite or S-video. I have one of those digital-to-analog boxes from the US TV conversion, and its composite output is plugged into the composite input of the card. Looking at the players, however, it is not obvious which device (or other input) to choose, or what settings should be. How can I make a player get the video from the plugged-in analog source?
View 1 Replies
View Related
Jul 15, 2010
We install a Maudio delta 66 card on a ubuntu 9.10 karmic. We try to run alsaconf and the system say invalid command. We need to let it work..
View 1 Replies
View Related
Jan 3, 2011
I just bought an M Audio delta 44 soundcard, and am not sure how to get it set up properly. I realize it's primarily a recording card (and that's what i bought it for) but ideally I'd like to use it for all sound functions on this computer and throw my crappy Audigy card away. What I need to figure out is how I can route left and right stereo sound to two of the mono outputs on the D44 (for instance, output 1 might be left and output two could be right). Does anyone have any experience with these cards?
View 2 Replies
View Related
Jul 7, 2011
Looks like Pulse is the cause of another problem with the ICE1721 chipset (when will this madness end!!). Anyways I have a pulseverbrose.log file that I'll pastebin here: Ubuntu Pastebin Also results of /usr/sbin/alsa-info.sh are here: Ubuntu Pastebin The symptoms are:
1. with Pulse I can play a guitar through inputs 1&2 and hear the output, but can not play any pgms like Banshee at all.
2. After "killall pulseaudio" I can then play Banshee but no external inputs, like a guitar.
The sys:
1. OpenSuse 11.4
2. 2.6.37.6-0.5-default Kernel
3. pulse-0.9.22
4. cat /proc/asound/version=Advanced Linux Sound Architecture Driver Version 1.0.23
5. Advanced Linux Sound Architecture Driver Version 1.0.23=alsa-1.0.24.1-4.7.1.i586, alsa-utils-1.0.24.2-3.1.i586, alsa-firmware-1.0.24.1-3.1.noarch
I'll update this post with more info as I get into it further..
View 3 Replies
View Related
Jun 28, 2010
I have an old Logitech Wingman analog joystick connected to a game port on a Creative sound card. At this point I've got the system to see the joystck and was able to run jscal. I was also able to run jstest. I was able to see positive & negative numbers moving the joystick in four directions. However, when I try 2 different MAME games or Open Arena there is no right direction. Pushing the joystick right only stops it from going left.. Up and down movement seems to be OK.
View 2 Replies
View Related
Aug 25, 2010
With openSuSE 11.3 the (analog) sound is very low as compared to the previous release (11.2). I have installed all I could think of like ALSA, but still no success. The installation uses the internal sound card of the M4A785-M mobo with the VIA VT1708S chipset.
View 4 Replies
View Related
Mar 5, 2011
my headset has a headphone jack and microphone jack.
if i go to sound preferences > Hardware (Tab) and select Profile: Analog Stereo Input, then I can record sound with Sound Recorder. but in order to be able to hear what I recorded, I then have to go back to sound preferences > Hardware (Tab) and select Profile: Analog Stereo Output.
i see there is a profile option "Digital Stereo (IEC958) Output + Analog Stereo input", but when that one is selected, i can't hear anything through the speakers..., so, still having to switch back and forth as described above. perhaps a profile option with "Analog Stereo Output + Analog Stereo Input" would work, but it is not there...
why do i have to switch back and forth? (actually, it seems this setting-switching-requirement is true of the laptop's built-in speakers and mic as well, not just the headset...)
(Everything in GNOME ALSA Mixer is unmuted and set to maximum volume. Capture is at maximum and the "Rec" box is checked...)
View 1 Replies
View Related
Jun 4, 2011
My problem is on bootup and shut down I get: analog input cannot display this video mode. I've got a dell monitor nvidia graphics card. Don't really know how to provide much more info than that. From what I've searched on the net is that it probably has to do with the refresh rate.
View 4 Replies
View Related
Jun 20, 2010
Using an ATI Tv wonder HD 600 card, and i'm trying to use it to view an analog signal through the coax input. Normally, I'd tune the tv to channel 3 and be done with it. I'm not really sure how to proceed with it.
Code:
scan /usr/share/dvb/atsc/us-NTSC-center-frequencies-8VSB doesn't pull in the correct input, and i'm not sure that non-digital inputs are even supported.
View 3 Replies
View Related
Jul 19, 2010
I've setup an HTPC with xbmc, and I'd like to output the audio from the system to both my digital and analog outputs on my mother board. How do I do it? Can their be a script that duplicates the output of one to the other? Here's what aplay -l said:
[Code]....
View 1 Replies
View Related
Mar 9, 2010
I'm trying to get skype going in Fedora 12 KDE x86_64 (fully updated). I did some testing with and without the pulseaudio server installed. With the pulseaudio, I didn't manage at all. I know I got it working before _without_ pulseaudio, but after a yum update the pulseaudio got reinstalled and the mic stopped working. Now I traced this problem down to what I think is wrong: I have a HDA Intel sound card, but 'cat /proc/asound/devices', doesn't show me any analog capture input at all:
cat /proc/asound/devices
2: : timer
3: : sequencer
[code]...
View 1 Replies
View Related
Sep 21, 2010
I'm looking for a Windows program/script/command line function that works like Linux's watch program. watch periodically calls another program/whatever and shows the result, which is great for refreshing an output file or similar every second: watch cat my-output.txt or, more powerfully: watch grep "fail" my-output.txt I've looked for it in cygwin's library, but it doesn't seem to be present.
View 3 Replies
View Related
Jan 10, 2010
I found that setting the video output module to opengl works very well. The only problem now is that vlc keeps changing my setting back to "default" rather that "opengl" or "x11".How do I force it to save my settings?
View 1 Replies
View Related
Jan 29, 2011
I have just purchased this audio card. It is a common audio card for home studio musicians or wannabees. Pulse Audio uses the ICE1712 [Envy24] PCI Multi-Channel I/O Controller for this card. In the "Sound Preferences window the hardware selections are only variations of digital options. The gui (software) to control this card is the "Envy24 Control" which can be found in "Specialist tools for ALSA" package. With this package you have options to control the digital to analog conversions necessary.
I cannot active the analog inputs and outputs of this card. S/PDIF outs function but I can not use them to input to my Dynacord mixer.
View 14 Replies
View Related
Mar 21, 2009
I am having trouble getting my USB-Dvb-Analog-Hybrid-TV-Card running with openSuse 11.1. (I already tried a lot of instructions I found on the net but none of them worked.) For example, when I try to install em28xx-new, compiling will work, but when modprobeing:
[Code]....
View 4 Replies
View Related
Nov 5, 2010
I picked up a Hauppauge WinTV HVR-1800 PCIe TV tuner a few days ago. Digital TV worked fine right out of the box (after setting up the firmware), but I have not been able to get analog video to work at all.If I run mplayer, xawtv or tvtime using /dev/video1 (yes, that is the correct devnode, video0 is a different card in my rig), So, has anyone RECENTLY gotten analog capture working on this card?
View 5 Replies
View Related
