Ubuntu Multimedia :: SOUND From Analog Capture Out Of Sync In Pinnacle Studio 14
Dec 28, 2010
SOUND from analog Capture is out of sync in Pinnacle Studio 14.
[code]...
This problem can occur during capture from an analog capture card if CPU utilization exceeds 95 percent. To avoid this problem, configure virtual memory to be "System managed" by following these steps:
1. Choose Start -> Control Panel.
2. Open the System control panel.
3. Click the Advanced tab.
4. Click the Advanced tab.
5. In the Virtual memory box, click Change.
6. Select System managed size, and click Set.
7. Click OK.
View 1 Replies
ADVERTISEMENT
Sep 1, 2011
I'm using natty. is there any way to get a Pinnacle DVC 101 to capture video from composite source on Ubuntu Natty? it seems that when new releases break functionality they often are never fixed.
I'm also unaware of a simple GUI application to use in order to capture the video. It would need start and stop features.
View 3 Replies
View Related
Apr 24, 2010
I have a pinnacle callisto video capture card which I am having trouble getting to work.
lspci
lsmod - notice that the saa7146 module is not loaded. If loaded manually the card is still not found.
Dmessg does not show the card.
View 2 Replies
View Related
Oct 20, 2015
So I got myself a USB capture card (EasyCap) to use for capturing gaming, digitizing my kids' old VHS movies, etc. It works fine, I've been using VLC to view and record stuff from it, but I've noticed one issue. When recording streams via VLC, even with no other programs running to give VLC as much CPU time as it wants, the audio slowly falls out of sync. I've tried the MP4 (H264/MP3) container and the OGG (Vorbis/Theora) container.
Early on you can't hardly tell, but the further into a movie you get the more out of sync the audio gets, so that by the end of the movie the audio is a good 1-2 seconds off. It's not a set amount either so I can't just split the audio to a separate file then shift it one direction or the other to make up for the difference, because like I said, the offset starts out at nothing and gets progressively larger as the movie goes on. When I select "display locally", the video/audio that is displayed stays in sync, only the video/audio that gets committed to the output file falls out of sync, and it doesn't matter if I play the file with Totem or VLC.
View 3 Replies
View Related
Mar 9, 2010
I'm trying to get skype going in Fedora 12 KDE x86_64 (fully updated). I did some testing with and without the pulseaudio server installed. With the pulseaudio, I didn't manage at all. I know I got it working before _without_ pulseaudio, but after a yum update the pulseaudio got reinstalled and the mic stopped working. Now I traced this problem down to what I think is wrong: I have a HDA Intel sound card, but 'cat /proc/asound/devices', doesn't show me any analog capture input at all:
cat /proc/asound/devices
2: : timer
3: : sequencer
[code]...
View 1 Replies
View Related
Nov 23, 2010
Alright, just installed maverick, got the sound to work great on the 7.1 with pulseaudio. works great in movies, and everything else just wonderfully. the only thing i am stumped by is how to get the sound to loop from my digital input on my soundcard to my analog speakers also on the same soundcard. i know the sound feed works on the input as the makeshift VU meter/bar on my digital input in the sound preferences moves, but i can't get the sound to actually come through on my speakers.
View 1 Replies
View Related
Oct 13, 2010
I am using OpenSuse 11.2 on a Dell Studio laptop. I have sound through the internal speakers, but no sound through the headphones.I am using KDE and Kmix does have a volume control for the headphone, and it is not muted. None of the sounds are muted.I have run the alsa update as described in another thread and that did not help.
View 9 Replies
View Related
Oct 1, 2010
I recently converted an amd 64 bit WINdows machine to Lucid 64 bit. Everything has gone well. I had numerous issues with Pulseaudio that I removed it. Sound with Alsa has been great, including system theme sounds. I can record via a mike as well. What I cannot do is to capture sounds coming through the sound card. When I record I am getting empty files. The mixer indicates that there are two capture devices. Here is some data on my audio card.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog
[ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital
[ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI
HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
View 2 Replies
View Related
Oct 18, 2010
I'm trying to capture my desktop sound (Video too, but that part's working) but nothing I try works. I've tried various programmes, none of them work. I tried various things I read on different websites, and nothing worked. I noticed /dev/dsp was missing, and put it back by a guide, but that made no difference and disappeared again now I rebooted anyway
View 5 Replies
View Related
Mar 21, 2010
I am using ubuntu 9.10 (kernel 2.6.31-9-rt) and an M-Audio Delta 1010 PCI sound card, and trying to get MIDI inputs and outputs to work on this sound card.I have Jack installed and working. MIDI signals from virtual keyboard or a MIDI player can be routed to fluidsynth, and fluidsynth's audio can be played back through the outputs of the delta 1010.I can use a MIDI sequencer (e.g. rosegarden or qtractor) to record MIDI from virtual keyboard, with jack handling the routing.
But, no matter how I configure the connections in jack, I can't get any signals from the "MIDI In" port on the sound card.Does anybody have some thoughts on how to fix this? Where is the disconnect between the delta 1010 and qtractor? I am concerned also that the "MIDI In" LED on the front panel of the Delta 1010 never blinks. There must be some basic ALSA configuration that needs to be done to activate and use these MIDI ports, or something. I've been trying to figure it out for days.
View 3 Replies
View Related
Mar 25, 2011
I have installed XVidCap Screen Capture. If I record my screen with XVid Cap Screen Capture there is no sound. But if I record with Desktop Recorder there is sound. What is wrong?
View 9 Replies
View Related
May 13, 2011
I am unable to capture sound from the sound card. I used to be able to do this with ease in SuSE 10.0 and 11.2. Now I have 11.4 and not only do I NOT have access to the sound card's channels (for base, treble, turning the mic on/off, and line in, Analog Capture Boost, etc) but now I can't seem to get at the settings for capturing sound coming from the sound card. I have tried using the Alsa mixer by way of the terminal and went to the Capture section and turned all of the settings all the way up. I didn't see any settings for Capture Boost as was available with 11.2's Alsa mixer GUI. Here's more of my info:
[Code]...
Isn't there ANY GUI sound mixer available that will give me access to all the channels I require? I not only record sound from my sound card, but I also use my mic at times for Skype and I like to be able to turn it off when not in use, rather than unplugging it all the time. I used to be able to do this with 11.2 and 10.0 and I really liked it that way. BTW, the plug for the mic is in the back of the computer and it's not convenient to have to plug/unplug it from there each time. For some apps, it's just a good thing to have all the sound settings done and in place before starting up the app. This I cannot do right now because of the changes to KMix and the Alsa GUI. I really really don't like this at all.
View 9 Replies
View Related
Mar 12, 2010
I have a problem with trying to capture sound through the input jacks on my computer. The sound plays through from the inputs to the output, and it's volume is controlled by alsa mixer, but no programs can pick up the stream, including the PulseAudio and Gnome Volume controls.I have tried many of the suggestions to be found in these forums for sound issues, including removing Pulse, configuring the model in alsa-base.conf, and messing with every setting I can find.Here are the outputs from the commands from the troubleshooting guides:
Code:
lspci -v | less
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio
[code]....
View 9 Replies
View Related
Mar 5, 2010
Have used DeVeDe to make DVD suitable for standalone player in lounge the player plays various formats. the problem is as the title suggests A/V not in sync. It was the first time I had ever attempted to create anything like this. Iam sure I set DeVeDe correctly, the file plays properly on the pc though.
View 1 Replies
View Related
Jul 13, 2011
In the last week, whenever I play videos, online or offline, the sound and video are out of sync. Usually the sound is a full second behind the videos, but I've noticed it at less.
I just tried watching a video and whenever someone said something, the sound was a full word behind the movement of the mouth.
This never happened until recently. I think there was an update to the sound drivers a couple weeks back, but I'm not too sure.
View 7 Replies
View Related
Mar 22, 2010
every time I want to listen music from my headphones I have to do like:
1. Main menu >> System >> Preferences >> Sound >>> Output >>>> Connector >>>>> Analog Headphones
and vice versa.
I have no experience in bash scripting and I have no idea how to find automatic solution to my problem.
The problem in pseudo-code:
Begin
if
headset plugged in front jack
then Connector := Analog Headphones
else
Connector := Analog Output
End
View 9 Replies
View Related
May 18, 2011
I have been searching for an answer through most of the recent posts about sound issues but have not been able to find a solution. I am currently unable to capture sound from the "Line" input on my sound card. I do have sound and is working correctly for all applications and I do have P/A disabled (I'm not a huge fan of the sound quality with P/A enabled). I have checked and re-checked many settings but to no avail have not been able to capture sound. I'm sure I may be missing something or have not done something in order for this to work. I was using openSUSE 11.4 on a different pc and had no problems, unfortunately this is a different pc with a different sound card which is on-board so I am not entirely familiar with it yet.
It is a C-media CMI9880 which shows up as a Intel HDA (ICH6) and appears to be configured correctly.
View 9 Replies
View Related
Feb 6, 2010
I followed the instructions here:
[URL]
And my system would not pick up a signal at all or show any channels after scanning. But, just as proof that the system detects the device, my Virtualbox shows this device (it's name and the fact that it is a tv tuner) as one of the available USB devices when it is plugged in. (I am not saying I want to use the usb stick with Virtualbox but only that the computer recognizes it and knows what it is and can even name it correctly).
I have found and never gotten even the slightest response from the usb stick. There is never any picture or channels scanned. This is true whether I am using tvtime or kaffeine or me tv.
Both tvtime and me tv say that only dvb is supported when I try to scan for channels.
So, anyway, using the link that I gave above, I got to the point where I downloaded the drivers from here:
[URL]
and what I got was a tarball. So I extracted it to my desktop and then changed directories in a terminal to the folder that was on my desktop and then I ran make and then I ran make install. And then I rebooted.
Well... still nothing. Neither Kaffeine nor tvtime nor me tv will detect any channels nor will any picture appear and they all say that I am lacking some kind of dvb support/driver whatever.
View 9 Replies
View Related
Jun 20, 2011
I have a sound convertion problem with devede and man devede to create a DVD movie from a video file in opensuse 11.4 32 bit, the sound in the file is mp3, but when I burn the resulting iso the sound is slow out of sync and hard to understand, the video is perfect
View 2 Replies
View Related
Oct 4, 2010
I am trying to get a Pinnacle 800e USB ATSC digital TV tuner working in 64-bit Lucid. I followed the 800e wiki for extracting the firmware file that needs to be in /lib/firmware, so dmesg output recognizes it without errors just like shown in the wiki. No idea what modules it should use, but seem to be loaded:
Code:
Module Size Used by
lgdt330x 9070 0
[code]....
View 2 Replies
View Related
Feb 4, 2010
Does th Pinnacle 300i PCTV works under ubuntu (and mythbuntu)?
View 7 Replies
View Related
Aug 13, 2010
What is the best analogue capture program please to capture Austar.
View 1 Replies
View Related
Aug 25, 2010
With openSuSE 11.3 the (analog) sound is very low as compared to the previous release (11.2). I have installed all I could think of like ALSA, but still no success. The installation uses the internal sound card of the M4A785-M mobo with the VIA VT1708S chipset.
View 4 Replies
View Related
Jan 26, 2011
I installed a fresh copy of Fedora 14 a few days ago. The default drivers for this device worked OK but I read on some forums that OSSV4 had improved performance/capabilities. I came across this thread on the forums which I followed. (incloded removing pulse audio) Since then I have visited almost every forum/site I can find to try to resolve my issue. I have reinstalled pulseaudio and editied almost all of the conf files I could find relating to the xfi cards.
I was worried that I may have changed a config file that I shouldn't have. I removed all of the pulse audio apps using: su -c "yum remove alsa-plugins-pulseaudio pulseaudio padevchooser pavumeter paprefs pavucontrol" and also removed the config backups so that on a new install they would be replaced. I will post any information needed to resolve this issue, my goal is preferably not to use pulseaudio and successfully be able to use my 5.1 analog audio system I am sure that the system is able to see the card, but loading the driver / sound utilities is not working.
View 3 Replies
View Related
Jul 9, 2011
Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps, the parameter is the maximum samples per second by which the audio is changed. -async 1 is a special case where only the start of the audio stream is corrected without any later correction.Searching the net makes one believe that this command is just some sort of magic.People just put it in the line and it just works. Isn't that nice?
It says nothing about how to change the TIME the audio starts syncing. Like do I want it to start 5 seconds delayed? Or what about 5 seconds sooner?What if the audio gets more out of sync as the video goes on? Can I slip it a little at a time? What? No magic?No one mentions a file that already has badly synced audio.So what -async 1 really does is simply start the audio at the beginning of the file. LIKE AS IF THAT ISN'T STANDARD PROCEDURE?So what is the exact solution to syncing a messed up video? And why can't it just do the proper "timestamp" sync in the first place?No docs, no info and you are left out in the cold.
View 4 Replies
View Related
Jul 19, 2010
When I talk to anybody on Skype, the sound is really slow, it sounds like I am a robot. Its running at maybe 1/2 normal speed. I am using Xine backend and internal microphone.
[Code]....
View 5 Replies
View Related
Oct 17, 2010
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
View 1 Replies
View Related
Feb 23, 2010
I'd like to try transcribing a few of my old vinyl records to my ogg player for the car. But which application to use? Sound Recorder is there in the default install of course, but it doesn't seem to have any kind of level meter in it. I have used audacity in the past, but maybe that's overkill.
The sticky howtos don't seem to mention anything as basic as this question. Which application would you recommend?
View 2 Replies
View Related
Jul 18, 2010
I could effortlessly set my output in Sound Preferences to be Analog 5.1. Now I just discovered that this option has disappeared, for no apparent reason. I haven't been messing around with any settings, other than installing updates as they've been rolled out. Would be nice to have 5.1 surround back as an option.
View 1 Replies
View Related
Sep 11, 2010
ive been making the switch over to ubuntu from Vista and one of the last things in my way is getting my M-audio 1010lt card working in ubuntu (9.10, 64bit). I set it up so that the maudio card is the primary card and in envy24control the digital mixer shows sound, and i turn up all of the sliders (and unmute) but nothing happens noise wise.
I went into the "sound preferences" gui and was able to disable the internal sound card. It lists: ICE1712 [envy24] PCI Multi-Channel I/O Controller 1 output/ 1 input the top part is fine, but the 1 in/out is wrong. I should have access to 10in/out. Additionally, in the "settings for the selected device" drop down menu, there is no choice to select analog stereo to analog outs 1/2. How can i get the analog output in this drop down menu or find some other way to get sound working??
View 1 Replies
View Related
