I'm thinking of getting a new multiple input sound card for my PC running 10.10
I want to be able to record at least 4 channels simutainiously and have good drivers in Ubuntu for it.
I am using ubuntu 9.10 (kernel 2.6.31-9-rt) and an M-Audio Delta 1010 PCI sound card, and trying to get MIDI inputs and outputs to work on this sound card.I have Jack installed and working. MIDI signals from virtual keyboard or a MIDI player can be routed to fluidsynth, and fluidsynth's audio can be played back through the outputs of the delta 1010.I can use a MIDI sequencer (e.g. rosegarden or qtractor) to record MIDI from virtual keyboard, with jack handling the routing.
But, no matter how I configure the connections in jack, I can't get any signals from the "MIDI In" port on the sound card.Does anybody have some thoughts on how to fix this? Where is the disconnect between the delta 1010 and qtractor? I am concerned also that the "MIDI In" LED on the front panel of the Delta 1010 never blinks. There must be some basic ALSA configuration that needs to be done to activate and use these MIDI ports, or something. I've been trying to figure it out for days.
I work for a company that uses Ubuntu exclusively. Without going too much into detail, we need a single sound-card to do up to 3 things at one time. What I mean by this, basically, is that there needs to be 3 instances listening to a card's line-in port at any one time. For example (these are made-up), Audacity listening to the line-in jack and making a recording of what it hears, a custom script that streams the input to the internet, and a third instance that listens to this input and runs different scripts based on what it hears.
Currently, our company sends out machines with 3 sound cards to do this. One card for each job. Of course, we'd like to save money and only send out one. Whenever we try to set all 3 programs to run off of one card, they error out and say something along the lines of "device already in use". Is there a way to go around this? If so, how? We use the command-line version of Ubuntu 8.04. It is NOT x64. The hardware may vary a bit, but is for the most part, consistent. (We order in batches of 50.)
I can't get jack working
soundcard chipset: EMU10k1X
Here Qjackctl log:
Code:
p, li { white-space: pre-wrap; } JACK server starting in non-realtime mode
Cannot lock down memory area (Cannot allocate memory)
control device hw:0
control device hw:0
audio_reservation_init
Acquire audio card Audio0 .....
jack server is not running or cannot be started
already added
@audio - rtprio 99
@audio - memlock unlimited
@audio - nice -19
to
/etc/security/limits.conf
I am member of audio group. Realtime option unchecked. I also reinstalled ubuntu in a fresh install and the same problem.
There used to be a selector where you could set which microphone or line input should be used in KDE 3 (Kmix).
Now, in KDE 4 it is gone and I cannot figure out how to set it. i.e. to change from using an external mic to the internal mic.
I've never tried getting my mic to work in linux up until now. For some reason I can't get any sound to come through on the input. I don't really mess with my sound settings so my knowledge is pretty limited in this area. I have a Creative Audigy 2 card and it seems to be using PulseAudio. alsamixer, aplay etc. all seem to NOT be installed. I can edit volume one of two ways. The gnome sound prefrecnes or using pacmd. I'm kind of at a loss here and my searches haven't turned up anything useful as they refer to alsamixer etc.
View 2 Replies View RelatedI had have this problem since I first install Karmic back in February. Now I installed 10.04 and the problem with the input sound is still here.
Plain simple: there is no input sound at all.
I already checked the alsamixer controls at the terminal and everything seems normal. I have a sonny Vaio laptop model VPCF11FD.
I'm using a Dell Vostro 1700 with Ubuntu Lucid Lynx and nothing I do with the sound preferences changes anything. I've also tried running alsamixer. no luck.
View 4 Replies View RelatedWhen i try to record with my dvc100 on Ubuntu the only thing that i found works is vlc but that doesn't even work properly. i found out that vlc-plugin-pulse is flickering on and off can i either replace or fix this.
View 2 Replies View RelatedI delete input device. How to fox it? All the sound is working only microphone problem.
View 2 Replies View RelatedI have an M-Audio Delta 44 sound card, and a USB MIDIinterface device, both are recognized, and work. My problem is as each are seen by alsa as sound cards, sometimes the alsa card numbers switch between boots. Is there a way to set these devices to always have the same card number for alsa
View 1 Replies View RelatedI have the following problem. As trying to record with an analog microphone through arecord, audacity, gnome-sound-recorder i can get no sound captured. Then i've tried skype where the volume is too low and the sound is distorted.
Until i was using an usb webcam with mic integrated i had no problem using skype but with a simple usb mic i can't get sound recorded. I've tested 3 different mic in a windows os and in opensuse 11.3 on the same pc with a double partition. All of them are working fine with win but not with opensuse.
Bellow i' m providing some info as requested in a similar post from oldcpu
11.3 x86-64 & vt1828s - No sound from mic or line in code...
i've tried to upload to the alsa site but it gave me only a .txt output therefore, i've put it on pastebin.
Sound output works without problems. The only problem is the mic input.
When the volume of the mic is at 100% i can here sound from the speakers, what should mean that the mic is working, but it's not capturing anything. I've checked the mixers from yast>harware>sound and seem to be all up as in alsamixer in terminal and kmix.
I'd like to add that i'm using opensuse 11.3 with kde 4.5.5 updated today through the stable repositories and to have even updated alsa, as proposed always from oldcpu in the same post mentioned in the beginning of this post, from the following site and for my specific kernel.
I have had trouble with my sound since installing. I have been able to get output sounds to work by setting my sound output to:Internal Audio Digital Stereo (IEC95 instead of:However, my microphone does not work. I know it was working earlier on but I can't figure out what the settings were at that time.Are there any ideas on what I can try to get the input and output audio working correctly?
View 1 Replies View RelatedI'm using a terratec EWX 24 96 sound card with ubuntu studio, and I have sound with the digital output, I have no sound with the digital input.
I had sound with the same configuration in Windows XP, and all the hardware is ok.
I think I have no sound at all, with Ardour or Rosegarden, that's like if the digital input was not here in jack.
I've tried to look for a solution for a few days now, and haven't had any results so far. I really hope you can help me so I can get to talk with my girlfriend.I'm running Lubuntu with 10.04 LTS, and alsa version 1.0.23 on Samsung NC10.Hardware works, soundcard is recognized by the OS, modules are loaded, alsamixer volume up and unmuted, sound output is ok, arecord or sound recorder don't get input.
- The microphone hardware works. Having the volumes up I hear the noise from the speakers when tapping the microphone.
- Soundcard is recognized by OS (and like I said, music and all other sound output is perfectly fine)
I am sure this has been asked repeatedly, but I cannot find it anywhere. I have my TV's sound plugged into my mic input, and can see it registering a signal but I cannot get it to play out through my speakers. I have done this on older versions, but I cant remember the name of the mixer that allowed me to do it.
View 5 Replies View RelatedFor some reason my soundcard is recording every playback sound. This become apparent when I was trying to make a Skype call and the other people couldn't hear me. I checked my sound preferences and noted that the input was recording what they say (they could hear an echo). Also if I played back anything it would redirect to them. This has never happened to me and I've made a lot of calls in the past.
I tested with Audacity and it records fine, but when I play back the recording, it redirects to the input channel so it's not a problem with Skype. (my soundcard is a VIA VT1708B 8-Ch). Somewhere I read that the output of aplay -l is useful.
Here it is:
I used to be able to use Skype without a problem. I must have played with something as it now doesn't allow me to both use a microphone and external speakers at the same time.I go into sound setting and I am able to test the microphone (works) but then the speakers don't show, if I reverse the tests then the opposite happens.
View 1 Replies View RelatedI am currently trying to start doing some screen casting and having a problem with audio recording in gtk-recordmydesktop. The problem is that I need to record both; my computers audio card output, and my mic input at the same time. As of now I am able to record one or the other.
View 4 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedIn Lucid, Logitech Pro 9000 webcam worked fine until the kernel was upgraded to 2.6.32-24 recently. The usb sound was not listed in /proc/asound/cards. I had to boot from 2.6.32-23 to make it work.
UPDATE: the recent upgrade to 2.6.32-25 fixed this problem.
This week I got a TV card partially working in Squeeze. It is a PCHDTV HD-5500, sold for use with Linux [URL]. It has a Conexant chipset and open drivers. The drivers are already in the current (Sept/Oct. 2010) Squeeze kernel, 2.6.3x.
TV reception is working with Xine and VLC (probably would be fine with mplayer too). My question is, how do I get video from the inputs on the back of the card?
There's a multi-thing that takes inputs from composite or S-video. I have one of those digital-to-analog boxes from the US TV conversion, and its composite output is plugged into the composite input of the card. Looking at the players, however, it is not obvious which device (or other input) to choose, or what settings should be. How can I make a player get the video from the plugged-in analog source?
Just installed an Asus Xonar DS sound card. Installed the latest ALSA 1.0.23 drivers. The new drivers see my sound card just fine:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
My sound card infomation:
Intel 82801I (ICH9 Family) HD Audio Controller
nVidia Audio device
In my ubuntu 11.04, the sound seems not so clearly, seems something bass.
It's OK in windows 7.
I don't know how to config the sound card, or, is there any drivers updates on my sound card?
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies View RelatedFor the last 3 release all my hardware have been working like a charm. But after upgrading to Lycid I have problems with skype. I fix the camera issues with the following command
LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
But the sound of my microphone is totally jagged. I have an ICH8 Intel integrated card. I have worked the last 2 years (with an ocasionally glith in the volume) but not having Mic is a real PITAo what can I try to fix it? Please, don't tell me "remove all pulse audio stuff"... It must be another way.
I want to record a streaming-audio (not capture), to use an alarm sound. I opened up gnome-sound-recorder, but I don't see input drop-down menu. I tried Audacity, but it's missing the menu, too.I saw the specification sheet of my laptop, but it only says Mobile Intel� GS45 Express Chipsets, I'm not sure if it manages sound, too, but the sheet doesn't have any information about sound chip set.dd: It seems like I can't change this to 'solved'. I cannot say it is solved, as I don't yet see the drop-down menu in gnome-sound-recorder, but with PulseAudio I can perform the task, so it can be regarded as solved?
View 1 Replies View Related