I installed Lucid. I used to have Ubuntu 9.10 and to connect my iPod to my laptop's speakers. There was an option in 9.10 in the Sound Options to change the Mic Input into a Line Input. But now unfortunately I can't find it in Lucid have only 2 audio ports in the laptop: Headphone port, Mic port.
View 9 RepliesI recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.
I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.
In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).
Something interesting, though, if I do this:
Code:
arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null
it works correctly and outputs on both channels. But if I do
Code:
arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null
then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.
The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.
The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.
I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?
I wanted to take an audio feed from a stereo amplifier into my HP Pavilion DV6 laptop, in order to digitally record some old vinyl.
In the Sound Preferences tab, I seemed to be able to record easily from the internal mic, but there seemed to be no easy way to switch the preferences to enable recording from the Line In socket on the laptop.
We tried muting the mic, this only caused the system to record nothing. We also tried all the various available options in "the Hardware Profiles" tab, "Settings for the available device", but no the laptop seemed to be getting no "line in" input with whatever profile we tried.
On Mac, it was as simple as switching the input sound preferences from "internal mic" to "line in".
I'm using recordmydesktop for screencasts and currently use pavucontrol to select the monitor as the input source, as shown in many guides across the Internet, but I can't find anything on how to do it from the command line. How can I select a monitor as the audio input source for recordmydesktop from the command line?
View 1 Replies View RelatedI have been searching for an answer through most of the recent posts about sound issues but have not been able to find a solution. I am currently unable to capture sound from the "Line" input on my sound card. I do have sound and is working correctly for all applications and I do have P/A disabled (I'm not a huge fan of the sound quality with P/A enabled). I have checked and re-checked many settings but to no avail have not been able to capture sound. I'm sure I may be missing something or have not done something in order for this to work. I was using openSUSE 11.4 on a different pc and had no problems, unfortunately this is a different pc with a different sound card which is on-board so I am not entirely familiar with it yet.
It is a C-media CMI9880 which shows up as a Intel HDA (ICH6) and appears to be configured correctly.
i have this weird problem with my pavucontrol. for some reason my input levels go up and down by themselves when i'm talking on skype...mostly up...and it's annoying because i'll be talking normally, but to the people i talk to on skype it sounds like i'm yelling, and i have to have pavucontrol open always to constantly keep the levels under control..i've made a short desktop recording showing what i mean.i didn't include sound, but as you can see, i'm not turning the levels up manually..i just talk and they go up by themselves
View 3 Replies View RelatedI have a file with two fields of numbers that I want to use as input for another program.
Code:
The above code does not work, as I think it would take the whole first and second fields as the input for one particular instance of the program 'inputbashangle'. What I want is to get the first two numbers from the first line of the file 'outfailtest', execute 'inputbashangle' with them, then move on to the first two numbers of the second line for all the lines of 'outfailtest'.
I would like to use Japanese kana (hiragana, katakana, kanji) on Ubuntu but everything that I've tried to get it set up and running isn't working. The Spanish that I have set up is working perfectly so far.
I've read, the SCIM input program should start up automatically when loading a program, it doesn't. When I have it loaded I cannot seem to get the input working.
I am trying to write a script that takes an input file ($FileName) and an intermediate file ($FileName.info) and removes lines from $FileName if the value in $2 of $FileName.info is <75.
I can't figure out how to feed only one line of the .info file to the if statement at a time so that it will perceive it as an integer instead of a list.
The error I am getting now is ./script.sh: line 6: [: : integer expression expected
Sample input $FileName
Code:
Code:
Code:
Script so far:
Code:
I can't get Thai language input to work.
In "language support" I installed Thai, but it remains grayed out.
In "ibus preferences / input method", no languages are shown.
I added:
I added: "ibus-daemon --xim" to startup applications. No effect.
I've written my script so that it reads in the variables $1 $2 $3 $3....$12I have an input file as follows
word1 1 1 2 3 4 5
word2 1 1 2 3 4 5 6
word3 1 1 2 3 4
[code]...
On my first card of ALSA (alsamixer -c 0) I would need to record the Line only.
View 1 Replies View RelatedIt has been happening to me since I started to use this laptop from the company for a linux test bed. Several times a day, when I do something from the command line, for example running an application connecting to another host on the internet, etc,it comes to a freeze and does not come out of it. I can not do anything else than a forced reboot from the power button, because the keyboard and the mouse do not respond. This work laptop is a lenovo W500, running on ubuntu jaunty, release 9.04. I have not encountered this problem before with my personal laptop though. My person laptop is a lenovo X61s, running on ubuntu karmic, release 9.10Should I reinstall the work laptop with some other version of ubuntu? Could it be some hardware problem ? What tools should I use to diagnose
View 2 Replies View RelatedWhen Linux ask for my password in command line,my keyboard becomes unresponsive just for that moment or let me put it this way,until i need to write my password my keyboard is unresponsive,but for all other things is fine.or for example,i can input my password when i have a graphic interface but i can't with command line or i can't login to my computer from command lineexcuse me if my question is doll,i moved from windows to ubuntu just lastweek,( & i am flying high in sky with ubuntu & digging a very deep hole for windows too!!.)
View 2 Replies View RelatedI'm writing a program which now accepts user input:
Code:
echo "Enter a date in the format YYYY MM DD hh mm ss."
read gregyr gregmo gregdy greghr gregmn gregsc This lets the user input a date and time, such as 2011 06 21 15 12 45, and have each number assigned to their corresponding variable. Later in the program, these variables are put into an equation, and then the terminal spits out the answer. Now I have to have the program read all of the lines from a text file, which is in this format, assign the variables.
I want to compare the quality of a sound file (voice) before and after its transmission via a softphone (sjphone in my case). For this, i need to redirect the sound played, to the sound input (microphone or line-in).
View 1 Replies View RelatedHow do i take a single line of input from the user in a shell script?
View 3 Replies View Relatedhow to change my input language (the way typing in accents affects the output character).
Currently I am on a Brazilian abnt keyboard and an English system (which is what I want), but I am unable to output accented characters - which I sometimes want, when I am not programming. I need something to switch around, but cannot find where to configure additional languages (not keyboards) neither where to switch.
I am on 10.04 with a gnome desktop.
I have an executable with input options, like so:
Code:
./executable -n 42 -s 42
I've added gcov to the makefiles (compiling with --coverage, -fprofile-arcs, and -ftest-coverage, and linking with -lgcov). It builds fine and creates executable.gcno.
When I try to run gcov, gcov things the options belong to it:
Code:
$ gcov ./executable -n 42 -s 42
gcov: invalid option -- 's'
Usage: gcov [OPTION]... SOURCEFILE...
When I use quotes this happens:
Code:
$ gcov './executable -n 42 -s 42'
executable -n 42 -s 42.gcno:cannot open graph file
The command line options must remain. How can I get gcov to generate the same .gcno file it later looks for?
i open google page and want to search something, now , i want to change the input font which will be put into the search box, the default is english, how to exchange with others.
View 3 Replies View RelatedI installed SuSe Linux. By the installation I forgot to set the key-board to German. How can I change it now? I don't think I have to re-install the Linux again, right
View 3 Replies View RelatedI really don't know what to call it, but I want to change the color of text that appears before you type in whatever your input is.
For example:
Code:
negrabee@david-desktop:~$ ls /home/david/
I would want "negrabee@david-desktop:~$" to be in a different color. When you have whole bunch of commands and text in a full screen terminal, it gets really annoying to have to look for where you're entering the command so changing the color.
I need to create a single line of output from multiple and variable lines of input in a Linux bash shell script.
My input file looks like this:
Where there may be any number of umsecondaryphonenumber lines; if there is not a umsecondaryphonenumber line for a telephonenumber, I don't want to write any output.
So, the output file should look like:
The script I have so far is:
My question is - how do print each of the elements of an array in one record - i.e. what do I put in place of howdoiprintarray?
I need user to input a password through command line in Windows cmd prompt. Is there a way to encrypt the input (such as put it into ......) when user is typing ?
View 2 Replies View RelatedI have wireless USB headset with four buttons. Two for volume control (They work).
I'd like to use the other buttons too. One gives 'Alt-C' as input. The doesn't give visible any input. I tried to get the input with Wireshark but it could only capture 16 packages when plugging in the headset.
So my question is: How can I get the input for the second Button?
and how can I change the Input of the first button (Alt-C) to e.g. xf86audiomute?
When in the interactive envirment, my Input and Output are all mess-up. So i want to color the Input and Output with two different colors.. so i can figure them out..
View 1 Replies View Relatedbasically i have to create a simple program with will continually read input from the user until they enter a blank linei know how to read in certain input but not sure how to get it continually in a loop
View 2 Replies View RelatedI have a file called a.sql which I need to execute in a database and the script I am calling in a shell script .Before executing the script I have to change a value in the script according to the user input.How can I do this .
Eg...
A.sql file contains an sql query like this:
And My shll script is like this:
When executed the script it asks for enter salary and if the user has input 5000 then the Enter_salary value in a.sql must be replaced by 5000.
i have both windows XP and suse linux installed in my hp pc with monitor HPL1710. when i in stalled Scientific LInux (cern) in the unallocated space using default partirtion it is in stalled. unfortunatately i have choosen the screen resolution to be 1600*1400. So when i try to reboot it says:
Code:
Input signal out of range change settings to 1280*1024-60Hz I have no idea what to do ? I dont find any scientific linux sub forum . so i am sending the thread here.
I've never tried getting my mic to work in linux up until now. For some reason I can't get any sound to come through on the input. I don't really mess with my sound settings so my knowledge is pretty limited in this area. I have a Creative Audigy 2 card and it seems to be using PulseAudio. alsamixer, aplay etc. all seem to NOT be installed. I can edit volume one of two ways. The gnome sound prefrecnes or using pacmd. I'm kind of at a loss here and my searches haven't turned up anything useful as they refer to alsamixer etc.
View 2 Replies View Related