I got a problem with tv card...i just instal tvtime program for watching analog tv station, but i cant see nothing, this is snapshoot from info about card.
[url]
and from tvtime program
[url]
I am new here and I have tried checking similar threads as well as other sources in the net but could not get my card working. I use Debian squeeze on a P4 2.4MHz machine with 2 GB ram. lspci can detect all 8 chips but could not load the proper module since it could not identify the vendor. I have tried unloading the SAA7134 module and reloading repeatedly all possible cards from 1 to 174 by "modprobe -i SAA7134 card=#,#,#,#,#,#,#,# #-numbers 1 to 174 one a a time.
View 3 Replies View RelatedI am having trouble getting my USB-Dvb-Analog-Hybrid-TV-Card running with openSuse 11.1. (I already tried a lot of instructions I found on the net but none of them worked.) For example, when I try to install em28xx-new, compiling will work, but when modprobeing:
[Code]....
I am trying to set up an internet only Wi-Fi station using Ubuntu 10.04 so I can get on the internet while my wife does her school homework online. I was wondering if there is a driver for the ZyXEL G-302 H/W v-2 wireless card available? I have checked several sites and can only find v3 drivers.
View 4 Replies View RelatedThis week I got a TV card partially working in Squeeze. It is a PCHDTV HD-5500, sold for use with Linux [URL]. It has a Conexant chipset and open drivers. The drivers are already in the current (Sept/Oct. 2010) Squeeze kernel, 2.6.3x.
TV reception is working with Xine and VLC (probably would be fine with mplayer too). My question is, how do I get video from the inputs on the back of the card?
There's a multi-thing that takes inputs from composite or S-video. I have one of those digital-to-analog boxes from the US TV conversion, and its composite output is plugged into the composite input of the card. Looking at the players, however, it is not obvious which device (or other input) to choose, or what settings should be. How can I make a player get the video from the plugged-in analog source?
I just started messing around with openSUSE 11.3 (64-bit version, KDE environment).
My desktop computer has an internal fax/modem card (PCI version, mod. USR5610C). I am very confident that this card works with Linux and U.S. Robotics guarantees that much on their web site.
I connect to the Internet via DSL but I am attempting to set up the internal analog modem card as a back up should the DSL line be temporarily down. I went to YaST -> Modem and I see that my card was detected as "U.S. ROBOTICS 56K FAX INT Modem Not configured". I pressed Edit and the Modem Parameters page says that the device is in "/dev/ttyS4". I am not sure that this is indeed where the modem is located (is there a way to make sure?) but I accepted it and proceeded to entering the name of my Internet service provider, the access phone number, user name, and password. So far, so good -- I think!
Eventually, I come to a window where YaST2 wants to install the following:
* jack Jack-Audio Connection Kit v. 1.9.5-2.8
* smpppd SuSE Meta PPP Daemon v. 1.60.46-1.1.1
So far I have not installed them because of the Jack-Audio Connection Kit software. Do I really need to install it in order to get the modem working? The reason I am being careful is that I just spent weeks and weeks in trying to get my audio card (ASUS Xonar DX 7.1, PCI-E) to work with openSUSE and I sure do not want to mess things up and start all over again!
How to set up an analog modem with openSUSE 11.3?
How do you find one that runs in USB and how do you find it when it runs from a pci port. i already know that you might be able to find the kind of driver that is required to run the device
Lots of people have accomplished this by using aircrack but some operating systems can't install aircrack (not to mention that the use of some software is illegal depending on where you live) so i want an alternative.
I'm running Debian Lenny. I want to get a wireless card working. Spent ages trying to get my betgear WG111T wireless dongle to work with ndiswrapper with no luck so I'm going to fork out for a wireless card. I've googled extensively but haven't really found a satisfactory answer. Is there a wireless card/chipset that I can count on working fairly easily or even better out of the box with Lenny?
View 3 Replies View RelatedHow do I know if my intel chipset graphics card thing is installed?.
View 1 Replies View Relatedsome time ago I installed 8.10 on my x20 thinkpad. I at the time was trying to get it going on a Netgear WG511 v2 card. I was eventually successful in getting it going with ndiswrapper and all has been happy until...
I decided to give my laptop to an elderly friend for his first computer. He is living in a location where (for a variety of reasons) he is sharing a network connection to the internet with a few people. The protocol there WPA2 TKIP (IIRC) and no matter what the bloody thing won't connect. Here at home I run a different setup so its not a big deal
So, I thought I'd try another card to get it going there. I chose a "Aironet" card (badged a Dell 4800 LT) and tried to install this on 8.10
I expected it would install out of the box, but did not "seem to".
I followed the steps on this page, but still it won't connect to my WiFi at home (which I am using to connect to with this x31 thinkpad)
I am using Network Management Applet 0.70 and this works fine with the Netgear card, even showing all the local networks it finds.
When I plug in the Dell card it blinks the activity light and the status light in seemingly meaningful ways, but nothing seems to connect and I find nothing listed in the Network Applet.
I suspect that the OS is discovering the card as when doing an iwconfig I find two entries that would be that card:
eth1 and wifi0
iwlist scan returns:
which makes me think two interfaces are taking the same hardware...
iwconfig returns idential results for eth1 and wifi0
Out of curiosity, in linux, how do we check:
- The make/type of ethernet card
- The wireless chipset
- The video card
Used in a computer?
Ok a little confused here. I got this working in f14 no problems but anyway. I have a wireless usb net card with a realtek 8192su chipset and of course it is not recognized.Dloaded driver from realtek unzipped tarball. Ran make clean and no errors then ran make all and this is what I get same with make or make install.
Code:
[root@donnie rtl8712]# make all
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.38.6-26.rc1.fc15.i686/build M=/usr
[code]....
I've just installed a multiport serial card. This is an 8 port serial-only card. The main chipset on it is an ITE IT8871F.
I've got questions : Is there a driver I should try force loading on it (and if so, what options to use)?
PCI to Serial Quad 8-port Controller Card
Chipset: ITE 8871
on:
Ubuntu 10.10 Linux Server - Linux ubuntu 2.6.35-22-generic
lspci -vv show:
lshw show:
lspci -xxx show:
I have just installed an Edimax EW-7612PIn PCI-E Wifi card which has an RTL8192SE chipset. This chipset is not supported under current F15 kernels so I have installed the driver and firmware from source and have that working fine. The driver can see the card and I can issue 'iwconfig' commands successfully enough to see my Wifi network.
The problem I have is that I don't understand the relationship between iwconfig and wpa_supplicatant and as I'm running a headless F15 server I cannot use the NetworkManager GUI to help me. I should also note that the Wifi network is using WPA2-Personal encryption.
This is what I have done:
Configured /etc/sysconfig/network-scripts/ifcfg-wlan0 with what I think are reasonable values (based on google searches), including the ESSID, TYPE as Wireless, etc.
Configured /etc/wpa_supplicant/wpa_supplicant.conf, including using the key value returned from wpa_passphrase.
Arranged for wpa_supplicant to run from boot, using chkconfig.
However when I run 'ifconfig wlan0 up' I get the error message 'link is not ready' and indeed looking at the output from 'iwconfig wlan0' there are no configured values. I also understand that some values are configured by iwconfig and others by wpa_supplicant, however it's not clear what.
How do I permanently set iwconfig values?
How do I configure wpa_supplicant?
It always fails when I try the sound card test. It says like the system cant detect the sound card.
Sound Card: 5 series / 3400 series chipset high definition audio
Module: snd-hda-intel
After searching about the issue, I found the information that installing kmod-alsa-PAE-1.0.20-1.el5.elrepo.i686.rpm and kmod-alsa-1.0.20-1.el5.elrepo.i686 would solve the problem.
But even I downloaded and installed them, nothing changed.
== BEGIN uname -rmi ==
2.6.18-194.17.1.el5PAE i686 i386
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Media.repo
elrepo.repo
epel.repo
epel-testing.repo
mirrors-rpmforge
rpmforge.repo
rpmfusion-free-updates.repo
rpmfusion-free-updates-testing.repo
rpmfusion-nonfree-updates.repo
rpmfusion-nonfree-updates-testing.repo
== END ls /etc/yum.repos.d ==
== BEGIN lspci ==
~
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
~
== END lspci ==
== BEGIN lspci -n ==
~
00:1b.0 0403: 8086:3b56 (rev 05)
~
== END lspci -n ==
every time I want to listen music from my headphones I have to do like:
1. Main menu >> System >> Preferences >> Sound >>> Output >>>> Connector >>>>> Analog Headphones
and vice versa.
I have no experience in bash scripting and I have no idea how to find automatic solution to my problem.
The problem in pseudo-code:
Begin
if
headset plugged in front jack
then Connector := Analog Headphones
else
Connector := Analog Output
End
I have Debian 5.0.3 and I've had a lot of trouble installing Linsys WMP600N PCI card - Ralink chipset - 2860. I had it installed in the board, before I installed/compiled Debian. What I'm thinking I should have done was chosen Desktop and Laptop during the guided install. I tried expert install, but I was over-whelmed with options. Anyways, I tried NDISwrapper in many different ways. My last tries showed that the driver and device was working. No matter what I did, I would never get an interface with a wireless extension. I couldn't find any useful information anywhere, including Ubuntu forums - I'm sure you think I'm stupid or evil.
I eventually figured I would get the drivers directly from Ralink website. [URL] The one that looked like it would work (RT2860PCI/mPCI/CB/PCIe(RT2760/RT2790/RT2860/RT2890) would error out when I would try to extract anything. I used 2nd one (RT2860WebUI) which worked. If anyone does use it, be sure to read all documentation that is included, including the README. After I was done installing/compiling it, I got ra0 interface and could see my router.
I couldn't connect to it because I use WPA2 and that wasn't an option for encryption. I will work on that later. I wanted to share this information with anyone who might need this.
I installed fuppes from Index of /repositories/home:/bastianfriedrich/openSUSE_11.3
fuppes is a DLNA server and it is listed in the documentation of my Philips TV. I read the wiki on Main Page - FUPPES and as far as I understood followed the manual. However on the server I see the database filled with files, I see the TV listed amoung the devices, however the TV does not connect to the server.
it reminds me a lot of my good old days on the Unix mainframes...... I have a little problem everything works great except for my Philips GearGo MP3, when I plug it in it is not recognized on the system, my camera works, mys USB hard drive and Palm all work ok.
View 1 Replies View RelatedI need to bring an old philips usb webcam back to life using the PWC and PWCX drivers on a 2.4 kernel.. I found the PWC driver but the PWCX drivers.. can't find them anywhere they used to be available for download on the webcam nemosoft.. but it seems like they are no longer there anyone have this old driver laying around? File name should be something like pwcx-8.4.tar.gz.I googled it but little luck so far..
View 3 Replies View RelatedHave got Skype running in 64bit SUSE 11.2 but whenever my Philips SPC 900NC Webcam starts Skype crashes. Do I need a driver for the webcam or is it something else causing the problem.
View 4 Replies View RelatedDBus error org.gtk.Private.RemoteVolumeMonitor.NotFound: The given volume was not found
I get this message when one mp3 players gets fully charged.
The Fedora 14 (and 13) pwc Philips Webcam Driver.is only supporting 160x120 resolution (and nothing higher such as 640x480). Also not supporting some other things correctly, I suspect.I say so having tested multiple web camera software and either they don't work (because they have no setting for low res) or they do work if settable to low res., but not for any higher res.I also have a working setpwc tool which shows the driver does not support framerate resetting.I have a Toucam and Toucam Pro - same for both.Also these units worked fine under Fedora 11, and under earlier versions even Red Hat 4.But I usually got the latest pwc from Saillaird.org and compiled it to get full support but there are no more current sources there anymore, and the older ones don't compile.But as I am saying under F11 it was fully correct, now under F13 and 14 it is broken.
View 14 Replies View RelatedJust bought this monitor and it doesnt have widescreen support like my old Dell one but the crystal display in it is leaking across the screen. Maybe its just too new or something. I have little experience in configuring Xorg.conf although I'm pretty adept in other areas of Linux. Running ubuntu 11.04 gnome not unity or gnome-shell. The resolution is 1920x1080 (16:9), 60 Hz. with the default recommended nvidia driver. Maybe ran into the same situation or knows how to configure X.
View 7 Replies View RelatedI have a Philips webcam I would like to get to work with a proper driver on Ubuntu 10.04. It will work under a generic driver on programs such as Skype, but as soon as I try to use it for web cam sites such as BlogTV, it will say "Webcam required on this site."I have seen similar posts on this and other websites, pointing towards SPCA, but everything I have tried has not worked.When trying SPCA, I tried to do install on the terminal and all that would happen is terminal would respond with: "0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded."Is there an easier method I am missing here, or is there something am I doing wrong?
View 1 Replies View RelatedI have a Philips SNU5600 wifi dongle. My wifi network isn't particularly strong, but it has always been reliable, even when downloading and uploading large files such as ISOs to the internet.
I recently bought a NAS, and when I run rsync or try and copy a large file (eg 6 gigs) to the NAS, the connection will eventually fail.
The error message in /var/log/debug is:
Code:
I have read elsewhere that this is a problem with the Minstrel algorithm, so I have tried disabling that by creating /etc/modprobe.d/80211.conf with the following line in it:
Code:
And when I reboot, I am able to run "cat /sys/module/mac80211/parameters/ieee80211_default_rc_algo" and the output is "pid".
However, in my /var/log/debug, there is still the line:
Code:
Here is the output from a few other commands for extra information:
Code:
Code:
Code:
Code:
- The problem has only been around since I got the NAS, and only happens when copying files TO the NAS. Downloading/uploading to internet doesn't cause the same problem.
- This problem happens on two machines both with the same wifi dongle.
- This problem doesn't happen on a laptop running the Intel iwl3945 driver, nor with machines connected via cables, so it is not the NAS which is at fault.
How to get a stable connection when backing up?
I recently installed Ubuntu 10.04 and I would use my tv as desktop, in wireless connection with my notebook. The problem is that on the page url I haven't found the software for Linux.
View 3 Replies View RelatedWith openSuSE 11.3 the (analog) sound is very low as compared to the previous release (11.2). I have installed all I could think of like ALSA, but still no success. The installation uses the internal sound card of the M4A785-M mobo with the VIA VT1708S chipset.
View 4 Replies View RelatedUsing an ATI Tv wonder HD 600 card, and i'm trying to use it to view an analog signal through the coax input. Normally, I'd tune the tv to channel 3 and be done with it. I'm not really sure how to proceed with it.
Code:
scan /usr/share/dvb/atsc/us-NTSC-center-frequencies-8VSB doesn't pull in the correct input, and i'm not sure that non-digital inputs are even supported.
some application to record to what I am listening on? This might be some program that can capture for example mms output or just capture what ever I listen to.
View 9 Replies View Related