Debian :: Is Possible To Make Installer With Full Vmlinuz Instead Of Busybox?
Jan 10, 2010
It is just a question regarding ISO and the lack of -o loop or function of busybox.One can custom the ISO of debian-installer and make a syslinux config file having : vmlinuz of one normally running installed Debian distro, and keep the initrd of the iso regular debian-installer.I think it may be conflicting the vmlinuz kernel version and the installer of initrd.I am learning, so it may be completely wrong or kernel panic.
I've been trying to work out how to get a "full" debian installer (ie, not a netinst installer but as much as you'd find on say, the first CD) onto a bootable USB stick.Most of the tutorials I've seen work with the netboot installers only.The installer works until the "Detect and mount CD-ROM" step where it wants to mount a CD drive. Won't accept /dev/sdb or whatever device the USB stick is.
Using live-magic with the option to include the installer.The installer works until the "Detect and mount CD-ROM" step where it wants to mount a CD drive, as above. This confuses me, since why would live-magic include this capability if it didn't work for a USB stick?
I'm having a problem with my debian installation; I am using the debian testing / wheezy weekly build CD, and despite using the full 650MB CD, and checking the CD to see that X, gnome, etc is all on there, it seems to insist on just downloading every single package from the internet - the CD doesn't even spin up during the 'select and install software' stage
This wouldn't be that much of a problem, except whenever I choose to use the graphical environment, it downloads all the packages, installs half and then says 'an installation step failed'!. And as it has to download the full set of packages from the net (rather than the CD) it gets a bit tiresome waiting 2+ hours for all the packages to download (I have fast internet, but the debian server doesn't feed data that fast).
And, the reason I am installing the graphical environment is that, although the installer recognises the network card, once you boot into the freshly installed system, it doesn't recognise the network card at all, and trying to bring it up just says 'eth0 not ready'!. So I want to get the graphical environment to make wireless easier to install, since the drivers for that are present, but wpa_supplicant isn't!
I'm tempted to just go and get Linux Mint Debian Edition... but I should be able to at least *install* Debian? (on a side note, I can't see what I'm doing wrong, since you can't really go wrong with the installer - it just seems to fail itself each time!).
how to make the installation faster by getting the installer to use the CD full of packages that I downloaded, rather than downloading the from the net each time, and also how to (1) find out *what* happened (the expert mode just says a step failed and that is it), and (2) to either get round it at the time, or prevent it happening somehow?. I installed Debian in 2007 on another laptop and that worked, but I then moved to Ubuntu as I wanted some newer software...... Ubuntu has been great until 11.04 which seems so full of bugs it isn't funny, so it is time to go back to Debian, if only I could get it installed!
I have a Lenny inside a xp. I changed my installation and make a boot partition , a home directory, and a system directory. now I reinstall my xp and do this:
find /grub/stage1 root (hd0,6) setup (hd0,6)
and grub menu found! but when I clicked on debian, can't boot and I have a message about can't boot from this vmlinuz ( or any thing similar!) , click on any key and then it come back to grub menu. my debian is on (hd0,9) and (hd0,6) is my boot partition.
I saw many linux OSes have a smooth stability with sun virtualbox.for example VBoxaddons already initially installed.I installed fedora 12 x86_x64 (within vbox in xp64bit)but only 800x600 resolution is avaible.Smooth Mouse jumping from Pc to vbox etc.
1.is there any good installer that have already packages initially installing for virtualbox ? 2.Which version listed below have x64 kernel?
I would like to make a bootable Ubuntu system on a USB stick from a full install, so I can update the packages/kernel etc, and I would also like to have the ability to Install ubuntu from the USB stick onto other computers. What package allows you to run the installer that is found on the LiveCD?
Also, is it possible to have a Ubuntu installer that uses updated packages rather than the LiveCD so they are current when installed rather than the release packages to save on the download/updating time?
I have installed vmlinuz and initrd.gz (squeeze) in /boot/newinstallation and added to Grub the lines:titleNova Instalaçãoroot(hd0,0)kernel/boot/newinstall/vmlinuzinitrd/newinstall/initrd.gzNevertheless, when I choose this option at the grub, it begins to start the kernel vmlinuz and thus restart the system. The installed Debian Lenny boots in a normal way.
First off, the PC I am hoping to dual-boot off is actaully a netbook.The exact model: Packard Bell PAV80.It is currently running Ubuntu 11.04 but I am hoping to add a dual boot of a MAC OS. I was just looking for some advice before I went a head with this.
1). Straight up, What is the best MAC OS for a Netbook? 2). What risks should I be aware of? 3). How should I go about this? Is it as easy as installing linux for netbooks (via usb)? 4). Should I make a partition in ubuntu or with the MAC OS installer?
I'm trying to get the progress bar from workrave to display properly inside avant window navigator. Does anyone know how to make the full bar appear? At the moment only half the bar appears in AWN's task area.
I have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
Firstly i have to inform you that I'm completely new to fedora and linux.. i have an IBM R51 laptop with Pentium M 1.5Ghz, RAM 512mb and intel 855GME graphics. I'd like to install fedora 15 with gnome 3 and take advantage fully of its capabilities! as far as I'm concerned i should upgrade my RAM and graphics.. could you please suggest me an option, for the RAM and the graphics, that will be compatible with my existing hardware? (I'm a bit of an amateur and so i can't really tell the model of the motherboard
I'm trying to add a scheduled full backup to the crontab file, but the full backup never completes; it always stops somewhre in the file system. I guess is b/c the os is updating those files or has them open. I've tried to use the --exclude options but still it always hangs somewhere else.... this is what I'm usingtar -zcvpf /mnt/storage/backup/fullbackup1.tar.gz --exclude=/mnt --exclude=/sys --exclude=/proc --exclude=/lost+found --exclude=/net --exclude=/srv / > /mnt/storage/backup/fullbackup.log
I'm got ubunt-desktop running VirtualBox. I installed MS XP HOME on a virtual disk. so everything *works* .. but I'd be a lot happier to have the box opened up all the way to my Ubuntu top-and-bottom bars.
I know that you can make it full screen, however it just makes the background OS's background black, and still provides a smaller display. Is it possible to make the guest OS's screen (or display) full size?
I have Bind on the machine at present, but I was wondering how much disk would be needed to make it a full DNS server that could act in place of a dead upstream service.
Firstly I've never (successfully) upgraded before using update manager -d but I've only tried once. I'm on 10.10 at the moment but I want to make a full disk backup using Acronis and try out 11.04 beta 1 so if I can't boot (like with the 11.04 Alpha 3) I'm ok.
What I want to know is if I upgrade to beta 1 it will install new things and settings, if beta 2 is released and I upgrade to that (after having beta 1 installed) will it overwrite all the settings again? Or will I be able to spend time set beta 1 up nice how I want it (if it works) and just smoothly upgrade gradually to final 11.04 keeping it pretty much exactly how I want it?
Also with the software sources, I understand I need to disable the ones I manually added before updating from 10.10 then to re-enable them, but how do I re-enable them for Natty as they are currently for Maverick? Do I just change the word Maverick to Natty, or is it better to remove and re-add them for natty? And do the authentication keys need updating or are they ok? I don't really know a lot about the keys.
1 more thing (sorry) will an upgrade overwrite any settings I have e.g. etc/fstab, sudoers, things like that? I know when you upgrade it gives you an option for some things e.g. keep or replace, if I keep old settings from maverick does it matter? Or does 11.04 add new lines/things to these files if I choose replace?
Sorry for all the questions, I'm pretty new been using ubuntu as my only OS for couple months now and most of my time has been spent tweaking settings and I don't want to lose them, or do a clean install when 11.04 final is released as I won't ever be able to remember them all.
I've been Googling all day and cannot find the answer. I find all the "GUI" ways to do it through Gnome and KDE but I'm not using either...I have an EEE PC set to boot up automatically to openbox and want Firefox to start after that in a full screen openbox window.I've tried adding the firefox command to ~/.initrc but it won't execute. I tried the command in .profile. This brings up firefox on a black screen without openbox.Firefox comes up fine when executed from the openbox menu.
I just did a simple debootstrap lenny /opt/lenny-chroot http://fpt.de.debian.org/debian There is no vmlinuz or initramfs under /opt/lenny-chroot/boot. What would be the next minimalistic necessary step to get it there?
I use Linux (Gentoo) since many years. I always used gentoo-kernels which I configured and compiled. Once it was done I usually got a "vmlinux"-file and a "bzImage"-file. I always used to copy the "bzImage"-file to my boot partition and I configured Grub accordingly and everything was fine.
Last week I compiled in my VM not only gentoo-kernels, but as well a xen-kernel (for my domU). Once it was done compiling the Xen-kernel (used the usual command "make -j2 && make modules_install") it didn't generate a "bzImage"-file, but a "vmlinuz" file. I therefore took the vmlinuz-file, copied it as usual to the boot partition and configured Grub to use that one, but with this time Grub doesn't want to boot and returns each time the error
Code: Error 13: Invalid or unsupported executable format Press any key to continue...
I tried with both "vmlinuz" and "vmlinux" but neither worked. I have no clue what I should to - should I try to somehow generate a "bzImage" (tried "make bzImage" after a "make clean", but it tells me that it doesn't find any bzImage to create), convert vmlinux/z to bzImage or make Grub somehow boot using vmlinuz?
Are there any "tricks" to make Grub boot using a vmlinux/z?
I can say that it's not a problem of the partitioning or setup config in Grub, as in the same grub.conf I have other 2 kernels (bzImage) which boot without problems only the config section that has to do with the vmlinuz/x doesn't want to boot.
when I finally wanted to install Debian to my hardrive. Somehow, how to copy it to USB drive and make it boot-able. Installation process started without problems, but it failed on step called (something like) "Find files in CD-ROM" - what was expectable, since I used USB drive. So I wanted to unmount "/cdrom" and mount my USB drive there instead. I moved to another terminal, and searched for right device. "ls /dev" does not help, since I can't scroll to see other devices. Also kernel messages - can't scroll. Tried to change keyboard layout, still didn't work. I also can't use less, because there is no apt-get installed. Another problem is, that after trying to mount only viewable device (/dev/sda1), mount failed bacause I gave there invalid argument, or directory didn't exist. (Note that I created directory in /mnt/... or /media/... first). So I am asking - how can I remap keyboard to use those page up/down keys?
I have and IBM e-Server, with 256RAM, however when I force the fedora installation to be perfomr in grapgical mode, Anaconda return a message that say that I dont have enoght Memory to perform the graphical installation. To my uderstanding It requiere 192MB of Memeory for a graphical installation.
What I'm doing wrong?, or is that the vmlinuz is booting into RAM and taking most of the space?
I'm using an acer aspire one netbook and attempting to install ubuntu 11.04 on it using flash drive. I extracted the installer using the universal usb installer. Anyway as soon as I get to the ubuntu installer screen it won't let the installer begin and says this: "could not find kernel img:/casper/vmlinuz. I have tried many things including typing in this:"vmlinuz initrd.img" and extracting the data to the flash drive again but nothing has worked.
One question /vmlinuz-2.6.9-34.EL ro root=LABEL=/ rhgb quiet 3 and boot the system. what kind of information each of the /rhgb and /vmlinuz subdirectoris include
in maverick the default package installer (when I double click on a .deb) is Ubuntu Software Centre, how can I make the default package installer from lucid (was it called "dpkg"?) the default again? Ubuntu Software Centre is too slow and freezes every time I click on something, can it be replaced?
