Applications :: Make Firefox Start Up Automatically In A Full Screen Window?
May 11, 2010
I've been Googling all day and cannot find the answer. I find all the "GUI" ways to do it through Gnome and KDE but I'm not using either...I have an EEE PC set to boot up automatically to openbox and want Firefox to start after that in a full screen openbox window.I've tried adding the firefox command to ~/.initrc but it won't execute. I tried the command in .profile. This brings up firefox on a black screen without openbox.Firefox comes up fine when executed from the openbox menu.
I'd like to make all window of of all applications are located in the center of screen when they are started every single time, is there any way to do that ? of course,what i am saying that they are GUI apps, and when they are not started as maximum size window
How do I move the Window control buttons when the window is in full screen mode? I.e.: I know how to go into gconf-editor:
Code: gconf-editor --> apps --> metacity --> general --> button layout = ":minimize,maximize,close" (I've intentionally disabled the menu...)
What I want is my window controls to be on the right side of the window when the window is in full screen mode.
Also I've had an issue with the Unity dockbar glitching out. I can still click on the buttons (i.e. the logout button) but it displays like a nintendo game inserted crooked. Is there a way to 'restart' unity without log out/ log in?
Any one else experienced any glitches with unity auto hiding/showing?
We are having a Linux box with Tcpdump continuously running on it to monitor bunch of sources. Separate Tcpdump process runs in a background for each host for monitoring traffic. I use -w option with it to save the capture in the pcap format to analyze it later. Now what I need is, if the Linux machine gets rebooted amidst of its packet capturing activity, I want tcpdump to automatically start the process again for every host without overwriting previous captures.
Remember: Without overwriting previous captures . . . Basically, I will be keeping all the tcpdump commands in the shell script and will load the script at startup during the linux boot. Is there any way to achieve this case, where by on rebooting, Tcpdump does not overwrite previous captures?
when the properties of a file change the default application, such as pdf or okular for gwenview for photos and to open these from the nautilus is opened as if they were full screen.
I have Release 10.04.1 on a T40 Thinkpad.Since the first time I installed it all application even the terminal start in full screen. I have to do alt-f10 if I want to see the maximize-minimize-close buttons on the left-top side of the window.I would like my application to start at the same size they were when I closed them last time.
I'd like to run a number of applications full screen (e.g., VirtualBox, Vendetta Online) but I'd also like to switch to my other Gnome Desktops easily.
Unfortunately, these applications seem to intercept my default and all other hotkeys I have tried for switching desktops ... I know there is a solution for VirtualBox via the host key, but I am looking for something more "generic".
Is there, for example, any way to catch key strokes in Gnome/Compiz before the full screen app receives them?
I have installed ubuntu 11.04 just yesterday and have installed the necessary nvidia graphic drivers too. But when I maximize any application(be it chrome, firefox, vlc, media player), the whole screen becomes white and when I escape from it to make it of small window, it again runs normally. Sometimes it work fine, but most of the times it is like what I told above. Please tell me some solution or I will have to go back to windows.
I am new to debian. While I am playing a video in vlc or in any other player its playing well in small sized window, but if i am making it full screen the video is getting blur...blinking..getting slow..but sound is okay.
I just rebuilt my fedora box and I'm having some problems getting dual monitors to work. First, I can't reposition my secondary monitor to be on the left. It thinks it's on the right. I can use xrandr to fix this, but that is annoying. Is there no way to do this in the display properties? Second, maximizing a window makes it go across all screens. I unchecked this option in the display properties.I also unchecked the one for letting windows be in multiple monitors at once, but this still happens.
Xfwm4 has a very nice option when right-clicking on the window decoration to choose a full screen mode... but how do I come back to the normal window size?
This obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
I have a lenovo thinkpad laptop, and it has both touch-pad (standard build in laptop mouse) and touch-point (in the middle of the keyboard) mouse options.
I almost invariably use the touch-point and the accompanied scroller and key-buttons.
HOWEVER, for the scroller to be recognized by ubuntu you must run two scripts as follows:
Restarting the computer resets these settings, and you must re-run them each time you start up ubuntu.
I am looking to write a script that will automatically run itself (which will execute the above commands), or to permanently change these settings so that it will not be necessary to run them at each start-up.
Thanks in advance, and if there is another thread on these forums that I should move to (or even just another thread that would be a more likely place to get a response). This seemed like the best forum (one which can certainly hold this post without violating any rules), but I may have missed something.
I used to input Chinese with scim input method, which can be trigered by Ctrl^Space. But this time, I reinstalled ubuntu 10.04, I have to manually start up ibus from System>Preference>ibus firstly before I can triger the input method by Ctrl^Space.
This is not over, the key problem is there are several dialogues to click "ok" with before I can really use the scim.
How can I make this ibus startup automatically and quitely?
I tried put command "ibus -setup" into my .profile, it does start up the ibus automatically every time when I login, but the dialogues still bothering me.
why my ubuntu 9.04 doesn't start in a full screen , it starts with low resolution , i have to press the button with two screens (i don't know what it's called ) on the keyboard so it comes back to normal .
laptop : dell latitude e5500 os : ubuntu jaunty 9.04
I've had this happen so often in the past, that I'm ready to ditch firefox altogether. I'm running F10 on a 3Ghz Intel dual core processor with a 500gb hdd. l prefer that my browser start up with a full screen when I launch it and firefox has been doing this just fine for the past 8 months. When I fired up firefox (version 3.0.13) this morning, it started up using only half the screen. As I've mentioned this has happened to me in the past and I've never been able to figure out how to get FF back to starting with a full screen. Does anyone know how to make it default back to opening in full screen mode? I've attached an image of how FF is opening now.
There seems to be nothing in Preferences or anything, but after the other night, all new windows load in semi-full screen, where the File-Edit-etc menus are there, but the bar at the top isn't, and the taskbar at the bottom is covered by it. Its what happens with certain annoying ads, but now its any window.
I installed dansguardian & squid on 11.2 and things seem to run fine. Squid auto starts but dansguardian does not. I have checked Yast2's runlevel services option and dansguardian is enabled to 'Yes'. But when i check with 'service dansguardian status' it reports 'unused'.If i start dansguardian by hand, things work perfectly fine.I am in a desperate situation since there are 4 other computers which are dependent on this setup to work correctly
I have switched to openbox from Gnome and would now like to stop using Metacity altogether. When I was using metacity I had both a control theme (e.g. gtk theme) and fonts set up how I liked them in gnome-appearance-proporties. When Openbox starts, it gets my window borders up properly (ofc.) but fails to render my fonts properly and uses the wrong gtk theme. I can't find anywhere to specify which gtk theme to use or what method to render my text with. After Openbox is finished doing it's thing, and I run gnome-apperance-properties manually, it will automatically set everything to it's proper value, but I don't want to have to do this as it takes several seconds to preform and I'd rather not have it jury rigged like this.
I've looked at the Arch wiki entry for configuring NVIDIA cards/drivers, and I found that you can put the command nvidia-settings --load-config-only into your DE's session startup configs to make it launch automatically upon login. However, I can't seem to figure out how to do this under Xfce. I've already tried modifying /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml with the following:
I'm got ubunt-desktop running VirtualBox. I installed MS XP HOME on a virtual disk. so everything *works* .. but I'd be a lot happier to have the box opened up all the way to my Ubuntu top-and-bottom bars.
I am configuring an internet kiosk on a centos 5.3. For that I need the browser in the full screen mode but here the network manager applet does not pop up the network status as the ethernet cable is plugged in/out. I want that feature in my kiosk. This feature works fine in an ubuntu machine. update me if any particular setting is responsible for this behaviour.
In my corporate environment, I'm required to run a Windows machine that acquires a VNC session on a machine in the server farm. My windows machine is dual head with different resolution monitors ( 1600x1080 on left and 1920x1200 on right). If I create a VNC session that spans the monitors, then maximizing a window in the VNC session causes it to stretch across both my monitors.
Instead, I want a "maximize" event to behave like it does on my windows machine -- I only want to maximize to the display that the window is on.
How can I define what, what I'll call, "maximize regions"? Regions in the VNC graphical plane where when I click "maximize", the window only expands to the region it currently ( and mostly) resides in.
Can I do this in gnome, X, xrandr, or some other magical interface?
I have Windows 7 and Fedora 14 both on my laptop in dual boot configuration. When my computer starts up it shows a screen that says press any button to select another operating system to start, then I can make Windows 7 start. But after 2 seconds, if I DON'T press any button then Fedora starts automatically. How can I change this so Windows starts automatically when I don't press any button?
I know that you can make it full screen, however it just makes the background OS's background black, and still provides a smaller display. Is it possible to make the guest OS's screen (or display) full size?
