Ubuntu Installation :: Full System On USB Stick With Installer Option
Jul 20, 2010
I would like to make a bootable Ubuntu system on a USB stick from a full install, so I can update the packages/kernel etc, and I would also like to have the ability to Install ubuntu from the USB stick onto other computers. What package allows you to run the installer that is found on the LiveCD?
Also, is it possible to have a Ubuntu installer that uses updated packages rather than the LiveCD so they are current when installed rather than the release packages to save on the download/updating time?
I've been trying to work out how to get a "full" debian installer (ie, not a netinst installer but as much as you'd find on say, the first CD) onto a bootable USB stick.Most of the tutorials I've seen work with the netboot installers only.The installer works until the "Detect and mount CD-ROM" step where it wants to mount a CD drive. Won't accept /dev/sdb or whatever device the USB stick is.
Using live-magic with the option to include the installer.The installer works until the "Detect and mount CD-ROM" step where it wants to mount a CD drive, as above. This confuses me, since why would live-magic include this capability if it didn't work for a USB stick?
Mmm the title has too many times the word "install" Anyway, I installed Ubuntu 10.10 in an USB stick and now i want to erase it. But when i try to delete it, a sign says it's protected and cannot by modified.
How do I erase it? PD: Sory if this is the wrong section.
Cannot install Ubuntu10.10 from usb stick to Vista PC for dual boot-installer crashes.Launchpad report bug not allowing me to report new bug either!I have been trying to install 10.10 ALL day unsuccessfully. Unhappy about unsuccessful outcome!
I saw many linux OSes have a smooth stability with sun virtualbox.for example VBoxaddons already initially installed.I installed fedora 12 x86_x64 (within vbox in xp64bit)but only 800x600 resolution is avaible.Smooth Mouse jumping from Pc to vbox etc.
1.is there any good installer that have already packages initially installing for virtualbox ? 2.Which version listed below have x64 kernel?
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
For some time, I have been trying to install fedora 14 on my pc, as I want a dual boot machine. It has windows xp already installed and running. I used liveusb creator to make a bootable usb. the problem is, when I log in and start the installer, it runs until I get the option "Select storage device". When I select the appropriate option , basic storage device, the installer screen disappears, and nothing more happens. I shall be much obliged if someone can point out the problem. My computer is a Dell optiplex 745 , 2.8 GHz with 512 Mb of RAM.
i have a failing hdd and need to run ubuntu from a usb stick instead of normal.i dont need to know how to have a live image on a usb stick and install to the hdd cause i dont have a hdd that works (or the money to buy a new one) what i need to know is if there is a way for me to run a full featured install of ubuntu from my usb stick.by full featured i mean, able to save options and general usage and not the "try" feeling of a live os.
btw the reason for all this is having a computer telling me all the time since installing ubuntu 9.10 that i have many bad sectors.when trying to erase the whole hdd with dnk (dariks nuke somthhing) i get the same message so i dont think its a scam (read about a bug in 9.10 causing working hardware to look like failing)i really need some help.also if anyone knows if theres a way to make a bad sectored hdd work again.
I have a Dell Studio laptop, which I am trying to make dual boot and in big trouble. These are the steps I completed.
1. Backedup all my important data on a USB drive. 2. Prepared a Ubuntu LiveUSB and booted in Ubuntu. 3. Used GParted tool to repartition my hard drive (320GB) as follows,
4. Accepted all these changes in GParted and restarted the machine. 5. Used VISTA installation disk to start VISTA installation on 1st NTFS partition (Partition 1).
-Everything was fine until now -
6. The VISTA installer took a really long time (around half hour) just showing copying files with 0% completion status message. 7. Somehow I got impatient and tried to cancel the installation.
Now, the problem is the system does not boot up even with my USB LiveCD or Windows VISTA installer. It just shows blank screen and nothing appears.
I am wondering, what are the merits of staying with an LTS release versus the renewal of the system by upgrading to a new release? Certainly, staying with an LTS release isn't going to be more or less dangerous than upgrading to a new release that specifically addresses security issues. With Lucid Lynx coming up this spring, should I try sticking it out until the LTS after Lynx, or keep upgrading regularly?
No error message given and system still works. Same result on Ubuntu, Chrunchbang and Fedora 12. Maximum speed 533 but size is recognised. Tried on another machine all is well.Errant hardware is ASRock N68-S with AMD AthlonX2 5050e. Stated as compatible on the asrock ref.
It is just a question regarding ISO and the lack of -o loop or function of busybox.One can custom the ISO of debian-installer and make a syslinux config file having : vmlinuz of one normally running installed Debian distro, and keep the initrd of the iso regular debian-installer.I think it may be conflicting the vmlinuz kernel version and the installer of initrd.I am learning, so it may be completely wrong or kernel panic.
Will the alternate installer cd for 10.04.1 have the option to install gnome desktop like the normal install cd? Also, if I install from the alternate installer cd, and use remastersys to backup my system afterward, will that use the default text based install that the alternate installer cd did?
What measuring system does partitioning step in Debian installer use - metric or JEDEC? I.e. it uses MB, which in JEDEC means 1024^2 bytes, and in metric means 1000^2 bytes.
I have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
I'm trying to install Fedora 11 x86_64 on system with Adaptec U160 and 2 Ultra160 HD. It is not part of a network and iSCSI is not wanted. But the installer keeps selecting iSCSI automatically and won't let me change it. I try to do a "replace linux system" with my own partition scheme-which preserves the partitions already on this drive. I eventually have to exit the installer.
Ubuntu in Windows 7 (64 bits) File system installed using Wubi I got Ubuntu 10.04 LTS intalled using Wubi. That means Ubuntu resides inside Windows file / folder system. It also means Ubuntu does not have its own partition. Here is what I found out:
1) It cannot detect wireless network unlike Win 7 on this same laptop. However, when I plug in ethernet cable, it was able to detect it. Is there a fix this problem?
2) I cannot see Windows folders. How do access windows folder from Ubuntu side and vice versa?
3) I forgot to set the disk space for Ubuntu during install and I think the default is 17 GB.Would this cause me problems? If so, what do I need to do? How do I expand the disk space for Ubuntu?
I want to try Debian on my Asus Eee netbook and I'm trying to follow the instructions in URL... But just copying the ISO file to the USB drive then trying to boot from it doesn't seem to work. I just get "Missing operating system".
The Eee can use an external optical drive as well but that failed also. I'm sure I need to do more to prepare the USB drive or CD? Can I prepare the USB Drive or CD on my Windows system, and make it boot on the netbook (which has another Linux distro on it now)?
i am using 10.04 now and installed many softwares in it,i want to upgrade to 10.10,i dont have broadband so i cant upgrade via online.. going to use cd only,how to get all softwares which i already installed in 10.04.i think there is no option in cd for upgrade without new installation.. is there any option to get all sources of softwares in my system and to install it after installing 10.10.
When using the Yast partitioner to partition a USB stick, I noticed there was no option for the ntfs format, but has the fat option. Is this a missing functionality/lib or by design? I have all of the ntfs stuff installed. I used to use gparted for this, but decided to make my self use the Yast tools. I like to keep them in ntfs format to get around the 4GB data transfer limit and have them readable by Linux and Windows.
probably did something stupid.. just haven't figured out what yet.. hope someone can point me in the right direction. daughters computer broke, maybe virus, so i did clean reinstall of xp. decided to give her a couple of linux distros, thinking maybe they are safer for when she is surfing..
Used gparted to repartition hd:
Partition table entries are not in disk order
Installed Ubuntu 8.04. was then able to boot into either ubuntu or xp. next installed fedora 10. new menu.lst did not show ubuntu, only fedora and xp. had some lockups in fedora, and had to pull plug to reboot 2 or 3 times. replaced power supply. added ubuntu into menu.lst. boots into fedora and ubuntu fine. tried to boot xp, and get "Preparing System Recovery Option", then PC Angel appears, and it wants me to use the system restore option for xp.
Is there something i can do to recover xp without having to wipe the hd and reinstall xp, then reinstall ubuntu and fedora (and if i do all that, how can i be sure i don't end up with the same problem?
Whenever I'm dealing with large numbers of computers that need to have identical windows installations put on them, I love using Symantec/Norton Ghost to image the NTFS partition (just making the .gho file the size of the disk I've used, instead of the 160/320GB full volume size), and then uploading it automatically to a windows share.I'd love to be able replicate this exact process with Ubuntu. I have one computer that's ready to go, and a few dozen more that I'd like to quickly get that same image on.
I've heard that there's a command called dd that can make disk images, but I'd really like some sort of boot disk that can allow me to make an image, save it, then run the boot disk on another computer to allow me to reconnect to the server and dump that image on that computer. Ghost 4 Linux doesn't have a network/server component, I think.even if such solutions cost money, I'd love to know if they exist or not.
I'm new to linux, and I'm just trying to learn OpenSUSE. I just installed it and I have a few quick questions. #1 I accidentally installed the "OpenSUSE Installer (LOCAL)" on Windows 7, so now I get the option to choose windows or the installer at the windows boot screen. I ended up just installing OpenSUSE on a completely different HD (my original intent) from a burned DVD, so this installer is useless and I don't know how to remove it.
#2 After installing opensuse on my second HD, the boot screen is now SUSE's instead of Windows, and I can choose suse's desktop, the suse failsafe, windows 1, and windows 2. Windows 1 brings me to the windows boot screen with the choice i mentioned above (windows or the local installer i accidentally installed), and windows 2 i assume is my second windows partition which is just my SWAP file, and selecting it does nothing (which would make sense if thats all it is).
My question here is how do I make it so my default boot screen is the windows one with an option between windows 7 or suse? Or would this require reinstalling the system? If it does and its simple enough to explain please do I wouldnt mind removing it and reinstalling at this point, I would just wipe my whole second HD from windows.
#3 I have a netgear adapter. unfortunitly i'm not at home right now and I don't remember the model, so I'll provide that this evening if necessary. What I do know is they do not have a driver for linux. I've found ACX100, but I didn't find my netgear adapter listed on their website. I also found NDISWrapper, but thats for XP and I still don't know if that'll work. I will of course try both unless someone here has a better solution. If anyone knows anything that will work on any netgear adapter for linux please let me know, if not then I'll provide the model later on.
I have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
I have already read the related threads but unfortunately, none of the solutions works/ applies to my problem: Having Ubuntu 10.10 as bootable DVD, I am trying to upgrade from Jaunty. When I do so however, after selcting "Install Ubuntu 10.10" in the installer menu I get the "unable to find medium containing live file system" error. I already installed grub2 and set acpi=off, my DVD is on primary master and, obviously boots as well.
So I wanted to install ubuntu on my pc along with Windows XP (I also had vista, but it did not survive motherboard replacing I burned the LiveCD and booted from it. I chose to try ubuntu. After few minutes of playing with it I started the installer from the icon. I tried the "install alongside with other operating system" option, but I how could know what it will do? There is almost no information in that window. I have two 750GB hdds. sda with big partition over whole space and sdb with two partitions (Vista, and 40GB for Windows XP), but the installer shows only a small strip with ubuntu sign with no readable information! My sda has only 8GB of space free, so would it resize the partition to be 8GB smaller and make new partition for Linux there? On sdb it does not show my two partitions from some reason, but just one big labeled Windows 7 loader, so what would it do there? Delete the WinXP partition? Not a clue because there is no information visible in that supersmall strip with ubuntu sign on it. Just that there are some partitions hidden.
Mouseclick or mouseover do nothing. OK so I changed to the "manually specify partitions" mode to be sure what it does...And now what? I decided to shrink my WinXP partition and let the installer use the empty space, but what a surprise? It does not know what to do with! "No root file system is defined". OK so I fired up firefox and surfed a bit to know what partitions are needed. I then made ext4 partition and swap partition (not a clue how big they should be though : But there is again that message about no root filesystem! OMG so then I somehow figured out I have to assign a mount point / to it, but why there isn't any tip or info that this must be done remains a mystery for me. OK so the installation finally started and I thought that it will be OK at last. But guess what happens! No GRUB boot menu appeared but there was a blank screen for a strangely long time and then the computer rebooted again and then Windows XP started right away! WTH? I guess installer failed to change MBR or something.
OK so I booted from LiveCD again and now what... There are some guides from 2006 to be googled, but when I typed grub into a console it said it is not installed! This is great.Now I crossed a point where no BFU would ever dare to go I said to myself :- When I used the command to install grub it told me it will uninstall grub-pc package. What is grub-pc? Typing grub-pc does not do anything. Is it even possible to install something when running from a LiveCD? The crazy story does not end here. I thought that I will install it again and risk the first option "install alongside with other operating systems", if it will have any more luck with GRUB. So I did that on sdb and it took crazy long time.
I was so afraid what it was doing, but it was probably shrinking my big Vista partition.Then it was installed and what a surprise - I booted right into Windows XP again You probably think I am a masochist if I keep trying so many options desperately, but I frequently help my friends with pcs so I am glad I can test all options and be prepared for anything Now I reinstalled the system again while I was writing this and I will try to figure out how to fix that damn GRUB so I could boot into Linux
I have a IBM T30 with 40 GB HDD and an Win XP system installed. I have just deleted the partion with Ubuntu 8.04, which was installed alongside Win XP as dual boot. I can see on the internet [URL]... that I should be offered the option: - Install alongside other operating system However I am only offered: - Erase and use entire disc - Specify partitions manually (advanced) What is wrong?
when I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
