Debian Installation :: Make The Installer Use The CD Rather Than The Net?
May 11, 2011
I'm having a problem with my debian installation; I am using the debian testing / wheezy weekly build CD, and despite using the full 650MB CD, and checking the CD to see that X, gnome, etc is all on there, it seems to insist on just downloading every single package from the internet - the CD doesn't even spin up during the 'select and install software' stage
This wouldn't be that much of a problem, except whenever I choose to use the graphical environment, it downloads all the packages, installs half and then says 'an installation step failed'!. And as it has to download the full set of packages from the net (rather than the CD) it gets a bit tiresome waiting 2+ hours for all the packages to download (I have fast internet, but the debian server doesn't feed data that fast).
And, the reason I am installing the graphical environment is that, although the installer recognises the network card, once you boot into the freshly installed system, it doesn't recognise the network card at all, and trying to bring it up just says 'eth0 not ready'!. So I want to get the graphical environment to make wireless easier to install, since the drivers for that are present, but wpa_supplicant isn't!
I'm tempted to just go and get Linux Mint Debian Edition... but I should be able to at least *install* Debian? (on a side note, I can't see what I'm doing wrong, since you can't really go wrong with the installer - it just seems to fail itself each time!).
how to make the installation faster by getting the installer to use the CD full of packages that I downloaded, rather than downloading the from the net each time, and also how to (1) find out *what* happened (the expert mode just says a step failed and that is it), and (2) to either get round it at the time, or prevent it happening somehow?. I installed Debian in 2007 on another laptop and that worked, but I then moved to Ubuntu as I wanted some newer software...... Ubuntu has been great until 11.04 which seems so full of bugs it isn't funny, so it is time to go back to Debian, if only I could get it installed!
It is just a question regarding ISO and the lack of -o loop or function of busybox.One can custom the ISO of debian-installer and make a syslinux config file having : vmlinuz of one normally running installed Debian distro, and keep the initrd of the iso regular debian-installer.I think it may be conflicting the vmlinuz kernel version and the installer of initrd.I am learning, so it may be completely wrong or kernel panic.
I have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
I've installed Ubuntu lots of times on my UEFI computer without any troubles. The last few days, I've been trying to install Debian Jessie on my computer. I do the steps bellow:
- Download the corresponding iso (amd64). - Create a UEFI bootable USB drive with Rufus. - With Safe boot, Fast boot and CSM disabled, I boot to the USB drive.
I expect to see something like this:
But what I get is this:
I'm using an Asus PC. GL550JK. The UEFI version is 205 (from Asus Support website).
Things I've tried:
- Booting with CSM on => Same behaviour. It's not my intention to install debian with CSM on, though. - Using Wheezy instead of Jessi => Same behaviour.
I tried to boot the net installer (debian-504-amd64-netinst.iso) from a flash drive (installed with dd). When I tried to boot that, my BIOS skipped the flash drive, which I had set the flash drive as the first boot device. So, I put it on a CDRW, and got the same result. I also tried the offline installer (debian-504-amd64-CD-1.iso) using both of those methods, with the same results. I verified the MD5SUM of this download. I am installing on a computer with a 64 bit Pentium 4 Prescott, if it matters. I have no other working OS on the computer. What other options do I have? Or am I doing something wrong?
I wrote the hybrid DVD image for DI b2 (Jessie) on the USB drive and booted from it (UEFI mode). But I don't see KDE there in the advanced options. Was it removed from the image, or desktop environment selection is moved to some late stage now?
I want to install debian 7.7 to a laptop with encrypted LVM, but some how i can't install inside the LVM a separate /home and swap partition. Graphic Installer says i cannot change anymore after i made a encrypted LVM. When i make the separate partitions before making an LVM, i can encrypt them but i have to enter for every partition my passphrase. How I can create a LVM with /, /home and swap without entering three times my passphrase.
I'm trying to install jessie on a new computer, but the installer does not see the hard drives. I copied the DVD-1 iso to a usb stick with dd (also tried the netinstall) and it boots, but when I get to partitioning, it only sees the usb drive. If I go to another virtual console and run dmesg or fdisk -l, all drives are seen correctly.
Back up a little - at first I tried the on-board raid, but when the installer couldn't see the drives, I went back into the bios and reset the sata mode to ahci. I've got it set to use bios/legacy OS, or whatever it's called, fast boot is disabled. Even if only one drive is connected, the debian installer does not see it. Then I read up on the fake raid I was trying to use and decided to go with software raid. Can't do that if there's no hard drives listed in the partitioner.
My own installer (refractainstaller) does work, and I've installed jessie with it a couple of times onto one drive, but I really wanted to use raid and lvm, and my installer doesn't do either of those things. No optical drive, but if that's the only way to install, I'll pull the one from my current box and use it for the install. I think I still have a blank CD or DVD lying around.
Hardware: ASUS H97-PLUS LGA 1150 Intel core i3 (the cheapest one at newegg) WD Black 1TB drives (2) GSkill cheap memory, which already passed a memtest.
I'm trying to install stable Squeeze from HD "!! Scan hard drives for an installer ISO image. The quick scan for installer ISO images, which look only in common places, did not find an installer ISO image, but it may take a long time. Do full search for installer iSO image? [YEs} No kernel modules were found. This probably is due to a mismatch between the kernel Version available in the archive If you're installing from a mirror, you can work around this problem by choosing to install a different version of Debian. The install will probably fail to work if you continue without kernel modules"
I have 2 machines packardbell p3/733 and a Gigabyte p4/1.9Ghz both are running well with Lenny.The Lenny installer (debian-500-i386-netinst.iso ) works fine on both machines.The all the copies of squeeze installer ( debian-6.0.1a-i386-netinst.iso ) work on the P4 but on the P3 it locks up / crashes video card / ??? when I select Graphical install.I have re downloaded the file and use gnomebaker to burn the iso image.could it be a hardware incompatibility ?
I am using mini.iso to install Jessie from network and I need lose setup command that is required by cryptsetup for mounting the detached header of an encrypted volume. Is there a way to get losetup from network during installation? For example by means of anna-install? Does any package from udeb.list contain losetup?
I am installing Whezzy and the installer failed to install grub on the MBR of /dev/sda
My disks are - /dev/sda : the flash drive with the debian ISO - /dev/sbd : a small SSD for the / partition (sdb1) - /dev/sdc + /dev/sdd : a software RAID-1 array with LVM for /home, ...
Grub fails to install on /dev/sda which makes sense since this is the flash drive containing the Debian ISO so no MBR.
I already tried to run grub-update manually on /dev/sdb (with chroot /target grub-install --no-floppy --force "/dev/sdb" ).
It works but the system is not directly bootable. I had access to a second PC to read the grub documentation so was able to boot and to fix my system but this is annoying.
Is it normal to see my flash drive as /dev/sda? Could it be that my flash drive is incorrectly detected as a HD?
Is there a way to force the installer to install grub on /dev/sdb?
I'd like to do a fresh install of newly released Jessie with only Xfce in a graphical installer. When I come to the point where i have to select the DE to install, there are options: Debian desktop environment, and then ...GNOME, ...Xfce, ...Lxde etc.
I guess that with the first option, it's like in Wheezy - it installs the default, which is gnome. But if i choose the ...xfce option, do i have to keep the 'debian desktop environment' option checked, or will that just install gnome alongside Xfce? Do i have to check only Xfce as an option?
I am installing Jessie to a dual-boot Dell Inspiron 1150 laptop currently booting Windows XP + Ubuntu 9.04. I downloaded the small installation image:
Code: Select all//cdimage.debian.org/debian-cd/8.1.0/i386/iso-cd/debian-8.1.0-i386-netinst.iso and created a live dvd using growisofs.
The Jessie install documentation says: "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from." For the downloaded image this produced the result
There is no MD5SUMS file in the download directory. There is an md5sum.txt file included in the iso image: this lists the md5sum of every file in the image, but not that of the image itself. The check for the burned dvd was successful :
Code: Select all~$ dd if=/dev/cdrom | head -c `stat --format=%s debian-8.1.0-i386-netinst.iso` | md5sum 645120+0 records in 645120+0 records out 330301440 bytes (330 MB) copied, 1.28047 s, 258 MB/s 095a83b715e1b74b6d30b2259275f4af -
Is this a documentation error ? I next booted the laptop from the live installer dvd. After generating a number of messages, it stopped displaying a message along the lines of: "Invalid video mode - press Enter to select a mode".
I assumed it would wait for me but it soon rushed on, producing screeds of segmentation fault error messages, eventually slowing down to a rythmic display of:
Code: Select all*** Error in Xorg:free() invalid pointer: 0xb7101ce3
***Surely it should have waited for me to press Enter?
I'm trying to install Debian 8.1 LXDE 64bit on a Toshiba Chromebook cb30 from usb. When I select 'install' the laptop restarts and gets me back to the installer menu. I removed 'quiet' from the boot options and it seems that the reboot happens after initrd.gz is read. I previously installed the 32bit version on the chromebook and the installation process worked pretty much without any issues. I might have added 'mem=1024m' to the boot options, though even if I did, this doesn't do anything to my current attempt.
The chromebook processor according to `uname -a` is x86_64 Intel Celeron 2955U. how I could install the image or start debugging the issue?
I was running Windows 10 on MSI GT70 2OD-064US hoped to dual boot first had three primary partitions shrunk largest one and ran debian-8.3.0-amd64-netinst.iso chose guided install with remaining free space, didn't force UEFI asked if I wanted to install GRUB after finding Windows Vista (loader) I went ahead and installed. Couldn't boot afterwards with dark screen saying no install media, changed BIOS to legacy mode and got grub prompt followed tutorial and entered these commands:
grub> set root=(hd0,5) grub> linux /vmlinuz root=/dev/sda5 grub> initrd /initrd.img grub> boot
This caused it to boot without GUI I ran grub-update and restarted back at grub> again. How to get debian to boot or even windows 10 again?
The installer for powerpc is broken in Squeeze. If yaboot is installed, it will break the whole boot process. I don't know exactly what goes wrong but it is a serious bug. I tried many times until I found out that yaboot is broken in Squeeze. In Lenny it still works luckily, so I could get something back after a complete sweep of my hard disk (the Lenny installer could not do anything with the ext4 partition of Squeeze as it is not supported in Lenny, so trying to put yaboot back did not work from there). Let this be a warning to people and a reminder for developers that there is a serious bug in yaboot.
I am still getting the error that no kernel modules are found when trying to load components from the CD on the multi-arch version of Squeeze. Are these even tested prior to releasing them? I mean I know it's testing but I thought we were reaching a release-date and the installer is 100% broken and has been for months. I have a pile of useless multi-arch CDs for Squeeze that won't install on 64bit or 32bit machines due to not finding the kernel modules. Can we get some testing on the installer portion of Squeeze?
I am trying to install Debian 5 on an Everex NM3500W Stepnote with a VIA chipset and integrated S3 graphics. The initial screen comes up, but when I click "install" it just prints the "booting..." message and sits there with the DVD spinning. Are there any particular problems know for this model? Any particular commands that might let the installer boot?
I'm trying to install Debian Testing onto my Acer Aspire One ZG5 using the testing versions of boot.img and debian-testing-i386-CD-1.iso. I previously installed (two days ago) the latest release of stable, and the boot.img/CD1 from that worked fine, installed seamlessly. With testing though, the menu does not respond to the keyboard as soon as the menu appears to select Install/Graphical install/Help, etc. I have also tried to boot with an external (USB) keyboard, which again, works fine with the stable version of boot.img/CD1, but not testing.I did some searching and couldn't find anything that looked similar
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
I downloaded the debian-live-6.0.1-amd64-kde-desktop.iso. Found here [URL] and made a bootable usb drive. After KDE starts there is the Debian Installer icon on the desktop and usually it will work, but not for me. I click the icon and wait for it to start but nothing happens?
I am using Wheezy netinstall on a USB stick. The machine has an Intel DH57JG motherboard, USB keyboard, and no optical drive. The installer loads to the initial screen OK, but the keyboard is not active. This problem has been reported for several years and was supposed to be fixed by kernel 2.6.32, yet here it is. What can I do?
One suggestion has been to disable/enable USB legacy support in the BIOS. It is enabled by default. If I disable it, the installer doesn't load. This keyboard works fine on other Linux machines and on the BIOS in this machine. I read there was a problem with Cherry keyboards and the Squeeze installer. This keyboard is not a Cherry but does have Cherry keyswitches.
I'm trying to install Wheezy (amd64) from the daily netinst image with the text-based installer. The PC will lock up randomly at some point in the process (usually after about 5-10 minutes). The video signal cuts out, keyboard lights are unresponsive, and I have to hard-reset the machine.I was previously trying to install Linux Mint Debian Edition and had the same problem. Another user reports that this is due to a bug in the nouveau nVidia driver, but I can't confirm it.URL...
I assume the Debian text installer isn't using nouveau, so it seems unlikely that would be the problem. The random timing does suggest an overheating problem, though, and the fact that the video signal drops out would seem to implicate the video card. I had no lockups at all with the OS that was previously installed (Ubuntu 11.04).
I try to install linux on hpc mini. Let's crack some keyboards. I have just bought a new pc: hpc mini compaq! I find windows Xp rather fine; but let's try linux. The PC has no cdrom, so, I cannot boot from any ISO of debian. I choosed testing netinstall, and followed the how to given on the debian website from another PC using knoppix iso cdrom. I did placed five files as shown here onto my pendrive as followed in one howto: I found 5 files for testing:
Code: debian-testing-i386-businesscard.iso initrd.gz vmlinuz and Code: 26644480 Aug 28 17:44 ../squeeze-debian-testing-i386-businesscard.iso with : [Code]....
I'm trying to reinstall Debian on one of my machines after an unsuccessful install of FreeBSD (it didn't jive with my ssd). Debian installations have never been a problem before on this particular setup before but now for some reason it won't get past the "Debian GNU/linux installer boot menu". The USB goes into idle mode and the menu does not respond to keyboard strokes. I've tried several debian images to no avail. Ubuntu seems to work just fine though but I don't want to install Ubuntu just because Debians having some problems. I booted ubuntu live and reformated the SSD I had tried to install FreeBSD on because there were no partition tables on it but that didn't work either. I'd like some expert input before I go do another `dd`.
What measuring system does partitioning step in Debian installer use - metric or JEDEC? I.e. it uses MB, which in JEDEC means 1024^2 bytes, and in metric means 1000^2 bytes.
I created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type= Entering MS-DOS parser (offset=0, size=8168931328) MSDOS_MAGIC found looking at part 0 (offset 0, size 657457152, type 0x00) new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
