General :: Unable To Boot With Ubuntu And Windows 7 - Grub Bootloader Getting Removed
Sep 2, 2010
I have recently purchased a new laptop, which came with Windows 7 pre-installed. I immediately installed Ubuntu alongside it with a dual boot. At first it worked fine, but when I restarted after the first time I used Windows, I ended up with an 'Operating system not found' error. I was able to reinstall the Grub bootloader using an Ubuntu Live CD, which appeared to fix the problem, but the next time I loaded Windows 7 and rebooted, the problem reappeared I think the problem is that Windows 7, for whatever reason, is somehow removing or disabling Grub.
I used Windows to reformat my Ubuntu partition and now I can't boot anything. What's the best way to recover my netbook? I'm only able to use a 256 MB flash drive.
I'm running Ubuntu 11.04 and Windows 7 on a Dell Inspiron. On boot I get the GRUB menu listing Ubuntu (+ old versions) and Windows 7. However, if I boot Windows 7 all is fine until I reboot. On this next boot GRUB is gone and Windows boots. Ubuntu is still there, I can get into using my live-cd and 'repair' GRUB. After that, on booting GRUB is back and fine (including Windows 7). Does any one have an idea how to fix the booting/GRUB thing more constructive?
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try
I've been using Debian for a few years but always on dedicated boxes and/or VMs.
Finally decided to dual boot Debian and Windows on my main Desktop PC.
Installed as I normally would using, however this time using a seperate drive (one for the existing Windows 10 install and the other for Debian), Debian install detects that windows has an EFI partition and sticks an entry in there, which is fair enough, and everything working fine. Then I spent some time configuring all my software and set it all up just the way I like it. I've rebooted Debian a few times to check it's working correctly and it is.
The issue arrives when I reboot and load into Windows 10. It boots fine.
However after a further reboot GRUB no longer loads... and the machine just boots directly into Windows 10.
After doing some further digging into my EFI partition (and reinstalling various times) it would appear that after a reboot Windows 10 deletes the entry GRUB creates in my EFI partition after EVERY reboot.
Done some googling and most people advise turning off 'fast boot' in Windows as it locks certain partitions to facilitate the machine going into hibernation, only to find that it's always been turned off on my machine (I recall due to a driver issue with my graphics card this had to be turned off when I installed Windows 10).
I've found this article on the Ubuntu forums : [URL] .... however I've tried their steps and windows is still doing a hostile takeover of my EFI partion after a reboot!
Any way to stop Windows 10 from interfering with my EFI files after a reboot? (without doing the obvious thing and kill Windows off).
Whenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
After installing Windows 7, the GRUB got re-written by the windows bootloader. Now after booting into the live cd and mounting /boot partition (sda2), I tried to reinstall the GRUB with this command grub-install --root-directory=/mnt /dev/sda as told by this [URL]
But I got the an error which says, Are you sure /dev is mounted? then i tried the same command on the / partition (sda5) which said, cannot find boot directory, Are you sure /dev is mounted?
And installation failed, now after restarting its just a black screen with grub> prompt.
I have windows 7 home premium currently installed and I have just recently installed Linux Mint and it has replaced my MBR with GRUB. Is there any way I can restore the normal Windows 7 Boot Loader and have the secondary option to boot my Linux Mint?
Two days ago i turned on my pc and suddenly there was a message:"Minimal Bash-like line editing is supported.For the first word,TAB lists possible command completions.Anywhere else TAB lists the possible completions of a device/filename.ESC any time exists...
When i googled this message it came out that this has got to do with linux (i have never used linux and i formated my disc once or twice since i bought it so i found it very strange that this problem is related to linux).Anyway,i found out that grub is the problem and that it isnt a big deal to solve it.I downloaded Ubuntu,booted it from the cd and followed the instructions...I typed in grub (in the terminal) and it told me to download it so i typed in "get-apt grub install" or something like that and it all went well,i was now in the grub directory.Then i typed " find /boot/grub/stage1" and it told me that the file was not found.
I have tried everything,i have downloaded the super rescue cd the fix the problem but i have still the same problem.
Im finally deleting vista from my disk, but as I am game addict I will re-install it afterwards just for games. Now I assume that will overwrite GRUB, so how do I restore boot record and at same time keep my grub config?
I have windows xp on my first hard drive and Linux on the second hard drive.The windows hard drive is labeled hda1 and the linux hard drive is labeled hdb1.I am using GRUB to boot the linux hard drive and it is installed on hdb.Is there any way to boot the secondary linux hard drive using the windows bootloader?I have tried several online tutorials for it but none of them work.
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.35-22-generic Found initrd image: /boot/initrd.img-2.6.35-22-generic
i had a dual boot xp/ubuntu first. later i had to format and reinstall xp. this deleted the grub bootloaderplease let me know, how to fix this! please make it simple . i have the live cd, but i don't have internet connectivity in ubuntu.
I installed Ubuntu and Windows 7 on my computer. I first get the Windows bootloader telling me choose between Windows or Ubuntu. If I pick Ubuntu, I then get a GRUB loader telling me to choose between different versions of Ubuntu and Windows 7. How do I remove GRUB and just use Windows bootloader?
When I try to boot into windows through grub it just returns to the grub menu.also system recovery options from bios just end up in grub screen too.here is boot script.From reading forums I think I need to get grub out of windows partition but I don't know how
Anyhow, I'm a n00b to the Linux world, so I installed it on my Windows 7 desktop to dual boot. Current configuration is as such:160GB HDD with 3 partitions: Ubuntu Studio 10.10 on one, Win 7 on another, and the third is for storage.1TB HDD for extra storage.So far, all is well, but I'm not pleased with the default GRUB options and layout. It gives me 4 options to choose:
-Ubuntu Studio -Memtest -Memtest Debug Mode (or something to that effect)
Is there any way to simply remove grub? Does GRUB reside in a specific partition? Do I have to just delete the partition that has GRUB on it?The way my bootable partitions work is something like this.
1)Installed Vista
2)Installed Ubuntu
3)Thought I removed GRUB
4)Put in new HDD(1) and installed Win7 onto it
5)Put in another new HDD(2) and put another Win7 onto that (but I disconnected every other HDD so that the bootloader would be written onto the new HDD(2). When I have all my HDD's plugged in now, I get a GRUB load error (I think it's 21).
Basically, I used a USB stick to run ubuntu 9.10 live, then tried to install to an external 500gb HDD connected with a Sharkoon Drivelink USB adaptor. The installation went fine, but I get a GRUB error 21 when booting a lot of the time. I figure this is due to the way in which the drive is connected. I am a complete noob, and I want to just ove GRUB completely and restore my Vista bootloader. Unfortunately, I do not have an installation disk as my laptop didn't come with one, and none of the others I have other PC's are the same version (home premium 32-bit).If you know of a way to fix the GRUB issue/sso I can use the external drive I would love to hear them too, but the main aim of this thread is to help me remove GRUB and restore the windows bootloader. If any more information is needed, just ask and I will provide it.HP Touchsmart TX2-1010Windows Vista Home Premium 32-bitExternal HDD:Seagate Barracuda 7200.11 SATAII (with jumper set for 150mbps)
I currently dual boot and wish to know how to remove the Windows partition/drive while still allowing Ubuntu 9.04 to load safely as my main OS. I know how to restore windows partition by;
If MBR gets damaged boot from MS Windows Xp disc, Select "R" for "recovery console", select main windows installation drive (admin password usually nothing, just press enter) and type "FIXMBR" this will allow you to boot windows again, but Ubuntu partition will be unbootable and require installing ubuntu again to dual boot.
But this leaves Ubuntu partition Un-bootable as it removes the grub menu, how would I do the same for Ubuntu and make window partition un-bootable so I can remove it?
I installed ubuntu on my lappy but due to battery life reasons and driver issues I cannot use it; must return to windows . I do not want GRUB on it but I'm stuck with it now. how do I wind the clock back?
I upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
I got a system crippling virus on my windows installation. My recovery disks gave me the same problem. So I installed Win 7 enterprise using a disk my dad got from his work. The installation went smoothly. When I started my computer after it went straight to Win 7 without the GRUB bootloader (not the case with restore disks). Could somebody please help me with this issue because I cant stand using Windows for anything other than games much longer.
I recently performed a reinstall of ubuntu after mucking up my partitions, and I am running it dual booted with windows 7.
I recently performed a grub-pc update, but I didn't know what it was asking me to do during the process itself of updating the process.
It asked me at one point where to install grub, and I selected all my partitions because it suggested that if I didn't know. I think that may have damaged my windows section, which was also selection.
I've attached the output for:
Code:
Problem symptoms:
1) Weird upgrade error in apt-get 2) Unable to boot windows 7 3) Unable to activate proprietary drivers 4) Perpetually being reminded to restart
yestoday,after I upgrade,unable to boot windows xp. if I use grub ,windows xp can boot up.but now I want to use grub2, boot info script's results.txt is at below.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for /boot/grub. sda1: File system: vfat Boot sector type: Fat16 Boot sector info: No errors found in the Boot Parameter Block.
I thought it would be cool and easy to install Windows 7, ended up being a headache and worthless so far. Now I only have the windows bootloader with vista and windows 7 as options. How can I get grub going again? I have all 6 fedore core 10 cds and a live cd in case those will help, I am using the live cd to play in fedora right now, but I am not sure how to get access to grub.conf and what to change in it, because I am pretty sure I have to add Windows 7 to it.
I currently dual-boot XP and Debian sid. I currently have XP on /dev/sda1, sid on /dev/sda2 with /home mounted separately on /dev/sa3, swap is /dev/sda4. I have free space in both sa3 and 4, mostly in 4, of course. What I'd like to do is add a third partition, either with or without a separate home mount, but have my current grub2 still be the bootloader. I'm thinking I'll give a total of 33 G to it (I keep almost nothing on my hard drive, it's all on the cloud). I want to install Kubuntu and try it out, I've burnt the Live CD and it's very cool.
I just want to ask if there is a way to make grub bootloader automatically boot to ubuntu every start up. And only make the bootloader appear when I press a certain key(ie. F7) so that I can boot to windows when I do not want to boot on Ubuntu.
I had windows 7 on my computer on drive D,then I installed opensuse 11.2 on space of drive C. But when I restarted my computer,I couldn't see windows 7 bootloader on the list, all of the options related to opensuse.
