Debian Installation :: Can't Choose Jessie In Boot Time
Feb 29, 2016
Some thing quite bad happened to me , i installed debian jessie about 2 month ago. Today I wanted to try what a gnu/linux is like so I installed dragora 2.2 on one of my free partitions , (sda 1 is my debian root , sda2 is my debian home, I had sda4 which nothing was on it so i installed dragora on it. But something bad happened , during boot time you get this page which asks you what distro you want to enter in past I had just one choice and it was debian jessie, I expected after installing dragora I will see 2 distros on this page, but i get just 1 , and that's dragora ... but maybe i should mention this that when entering dragora i can access all my previous files , debian systemfile , debian home , they are still there but i can't enter debian jessie ...
View 2 Replies
ADVERTISEMENT
Jul 9, 2009
I have a drive... let's say SDA1 On that drive I do a F10 install.
Now I remove the drive and put another drive in and did F11 install on another drive in the SDA1 slot.
Now I put the other first drive in.
Now, F10 is on SDA1 and F11 is on SDB1.
What can I add to FSTAB and GRUB.CONF so I can choose which drive I want to use at boot time?
View 14 Replies
View Related
Sep 26, 2015
I have two desktops running wheezy for years without problems. Recently, I reinstall jessie on one of them and won't boot anymore.The hardware is pretty normal: Asus motherboard, 12GB RAM, Nvidia video card, SSD hard drive, .After the install of jessie finishes, the very first boot failed, which means it hung up forever. The part that is annoying is that it fails at different places whenever I try.
For example, something, it fails at the following:
[ OK ] Started LSB: REP portmapper replacement
[ OK ] Reached target RPC Port Mapper
Starting LSB: NFS Support files common to client and server
Sometimes, it failed at start job is running for lsb set console font.It even failed to the console. When it goes to the console login, I can't put any user name or password. It's all frozen.The problem appears to be video card problem. But it worked fine in wheezy.
View 6 Replies
View Related
Nov 8, 2015
I've been using linux distros on my desktop forever, and got a windows 10 laptop recently. I want to dual-boot debain (jessie), so I installed it and it worked fine. Unfortunately, I have to enable Legacy mode in BIOS to boot into my grub then linux machine. Is there a way I can have my computer boot without legacy boot?
View 2 Replies
View Related
Nov 29, 2014
Basically I had windows 8.1 running on my fujitsu lifebook A532 laptop and wanted to dual boot kali linux alongside it, however upon installing the linux it deleted EVERYTHING! on my laptop, the grub bootloader only showed kali linux to choose from...
I then decided kali linux is too complicated for me and decided to delete everything and reinstall windows 8 again however I was surprised that my bios screen looks diffrent also I can not edit the boot sequence.
If I press f2 or f12 it takes me to a screen with a tab named Boot menu and its written on it debian and every time I press enter on it it takes me back to this same screen...
I can not boot from cd or usb!
View 3 Replies
View Related
Dec 4, 2015
I had Debian 7.9 up and running like a charm until yesterday. Today I did the upgrade to 8.2, now boot hangs. I see 3 boot entries for the new kernel now -
Debian GNU/Linux, with Linux 3.16.0-4-amd64
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (sysvinit)
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode)
The latter 2 entries have no problem booting up. So do the previous kernel(3.2.0.4) entries. Only the first one hangs, for which I see these 6 lines on the console:
[ 0.214704] pnp 00:04: can't evaluate _CRS: 12298
Loading, please wait...
fsck from util-linux 2.25.2
/dev/mapper/myhost-root: clean, 198627/61000000 files, 2160052/24412 blocks
[ 0.047141] kvm: disabled by bios
[ 0.000985] kvm: disabled by bios
How can I make it boot up like others?
View 6 Replies
View Related
Aug 13, 2014
I upgraded from deb7 to deb8, but am no longer able to boot. After passing the grub boot menu, the following messages are displayed:
Code:
Select allLoading, please wait...
[ 6.065713] systemd-fsck[148]: /dev/sda1: clean, 428644/1310720 files, 410616
9/52442880 blocks
[ 7.480551] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.692700] systemd-fsck[341]: /dev/sda5: clean, 145485/6176768 files, 17407409/24695552 blocks
[ 18.066215] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead
_
The screen then clears and an underscore is displayed as the sole character at the top left position of the screen. The system hangs at this point. During installation, I rejected two changed files: /etc/init.d/bootlogd and /etc/libreoffice/sofficerc. For both, I opted to keep the installed version (the default choice of the installer) rather than replacing with the new version. The first might be related to the problem, although it seems to be responsible only for logging the boot process, and I would not expect this to compromise booting.
In case this information is useful, sda1 is mounted at /, sda2 is swap space, sda3 is extended, and sda5 is a logical partition mounted at /home.
I am able to boot into rescue mode, but other than that the system is not usable. Unfortunately, no useful error messages are given to aid in diagnosing the problem.
View 12 Replies
View Related
Jul 10, 2015
I would like to upgrade from Win8.1 to Debian 8. This post might require some Wind expertise as well. I have to deal with the dreaded UEFI interface.
I got the iso with the added firmware from here: [URL] ....
The i386 download and it appears to be 334 MB. I pretty got it because I don't want to mess with the wireless controller (been there done that.)
As far as the Wind side goes I disabled secure boot. Just whenever I get to the fancy blue screen, I select boot from EFI DVD. Then it just says it can't load it and asks if I want to continue loading the OS. This might be useful I used the default Desktop Burning Gadget to burn the disk image.
View 14 Replies
View Related
Sep 4, 2015
I have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.
The grub.cfg file for the Jessie system has an other-os entry:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
set root=(hostdisk//dev/sda, msdos2)
search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The original Windows entry for the Ubuntu install was:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):
Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code] .....
Partition table entries are not in disk order.
The os-prober found XP:
Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain
So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?
View 5 Replies
View Related
Sep 18, 2015
Debian-live-8.2.0-amd64-xfce-desktop.iso do not boot in uefi mode. I would like to know if live image can boot uefi mode? If not how can I do later from bios to install grub efi?
View 1 Replies
View Related
May 11, 2015
I didn't change anything; it just stopped working on boot. I've changed permissions according to messages from log files. No good.I now get messages saying "unable to open display ' '." If I set the display (I've done this several ways, the messages say "unable to open display ':0'."
Systemd is taking control of everything basic, with almost no documentation and no configuration tools at all: rationalization by lunatics.You can make a script to run commands on boot using systemd on Jessie by creating two files: the script, in any location a file in /etc/systemd/system that runs that script..My script is called james-boot.service, placed in my /home/james/.bin directory.
#! /bin/sh
# this is run by /etc/systemd/system/james-boot.service
# Enable with sudo systemctl enable james-boot.service
# Check with sudo systemctl status james-boot.service
# If it says the service is loaded, it's OK -- inactive only means it's done running.
[code]....
This file must have ownership root.root, with (apparently) permissions 664 (rw-rw-r--).After creating, enable with sudo systemctl enable james-boot. service.Check with sudo systemctl status james-boot.service. If it says the service is loaded, it's OK -- "inactive" only means it's done running.
View 4 Replies
View Related
May 14, 2015
I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.
However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.
Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.
View 5 Replies
View Related
Feb 17, 2016
I have installed Debian Jessie 8.0.3 64-bit net install on an IBM ThinkCentre. I have earlier had a dual boot Win 8 and Ubuntu 14.04 installed on the computer. When I installed Debian Jessie, I deleted the Ubuntu partitions and created new partitions from the free space. The install went fine and the Debian EFI/UEFI version of Grub was installed, but clearly at some other place, as when I boot the system, the old Ubuntu Grub pops up and of course cannot find the necessary files that it is looking for.
View 9 Replies
View Related
Jul 9, 2015
I have debian jessie 8.8.1 Oscam and a phoenix card reader running on a tower pc. Everything works on reboot but when i leave it running then when i wake up in the morning the card reader has stopped working and does not show up in lsusb. The only way to get it working again is to reboot then it stops after x amount of time and the same problem.
View 2 Replies
View Related
Aug 23, 2015
I've got the last Debian stable release, the amd64-DVD-1 file , and copy it to my USB stick, using win32diskimager, as recommended in the installation guide.
It seems to go all fine, but when I rebooted, after entering the passphase it started a fsck "from util-linux 2.25.2", then it says:
"/dev/mapper/Debian-root: clean" and stuck there. i gave it quite a bit of time, tried to reinstall it and also got into the rescue mode of the installer,
View 6 Replies
View Related
Nov 1, 2010
i had debian linux and windows before but because of some problem in my windows i was persuade to change that but after installing there is no option in boot menu to choose my operating system ,after turning on win7 will work, what should i do? i need my linux immediately.
View 4 Replies
View Related
May 2, 2015
After some updates Jessie 8 my boot grub shows now 2 kernel versions to boot from.
3.16.0-4-amd64
3.16-3-amd64
- How do I know which one is the newest and if happy with it, how to remove the older one?
View 9 Replies
View Related
Sep 29, 2010
Just migrating to linux but I don't want to give up linux just yet so I've stuck in a 2nd hard drive to install linux on which I've done, now I have windows on one hard drive and linux on the other but my computer boots straight onto linux. I need the option to choose which os to boot into on startup which I've heard GRUB is the best option but I have no idea how to go about setting this up.
View 3 Replies
View Related
Dec 5, 2010
I am using Gnome and Squeeze. I am wondering if I have a problem of understanding, or a problem that I found with Gnome.
My configuration is with a 3 hard disk system.
disk1 (Debian)
disk2 (XP and Fedora)
Disk3 (W7 and a Data partition)
When I boot and log in, all partitions for disk2 and disk3 are mounted read-write. Only by going to command line am I able to unmount the drives with the following sequence
cd /media
umount *
umount *
I should be able to mount and umount a drive by providing or responding to a root password. But I am not given the option to present a password. My request is blocked.
I also do not want to see the drives remounted after a boot. I tried to find out how this was managed, but I was unable to discover the module and it's parameter list that controls or does this task.
View 1 Replies
View Related
Oct 31, 2010
With the startup disk creator on Ubuntu (Currently running Ubuntu 10.04 LTS) I realised you could boot Ubuntu from a USB and then install it onto the HDD if you wish to. *Side note* Still amazes me you can run a whole operating system from a USB memory stick drive *End Side note* Now My question is: 'Is it possible to have multiple distros of Linux on a USB memory stick and choose which one you wish to boot from when you boot up the computer?'I was hoping to get a seagate portable HDD ((here) and load quite a few different Linux distros on it to get a broader view of Linux than just Ubuntu (Although Ubuntu does rock ).
Is there simple ways of doing this? I have read around this forum and Google and a suggestion was given to install all of the distros onto the portable HDD/ USB memory stick and then install Ubuntu onto it last as its good for picking up other OSes in its GRUB. (Again if my idea on GRUB and its workings are wrong please point it out - got to keep learning)
View 1 Replies
View Related
May 17, 2015
How do you disable startx in Jessie when it boots up? In Wheezy I just had to disable the gdm3 service. I also tried a few settings in grub, but it still starts.
View 7 Replies
View Related
Jul 26, 2015
The grub boot loader offers in options to boot with sysv instead of systemd. The problem is that it seems to fail and fallback to systemd. Let's have a look on my dmesg :
Code: Select allroot@PCALAIN:~# dmesg | grep sysv
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=6740d56f-604c-4920-8c64-868e23976be4 ro rootflags=subvol=__active/root init=/lib/sysvinit/init
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=6740d56f-604c-4920-8c64-868e23976be4 ro rootflags=subvol=__active/root init=/lib/sysvinit/init
[code]...
So, how to successfully boot with SYSV ? Of course, the package sysvinit is installed on my system.
First, I have done a snapshot. Nevermind, is the following safe and the correct way to go back to SYSV :
Code: Select allapt-get purge systemd sysvinit
apt-get install sysvinit systemd-shim
Is it necessary to purge and reinstall sysvinit in order to guarranty configuration updates or on the contrary, will I break my system if it has none of systemd nor sysv ?
View 3 Replies
View Related
Oct 12, 2014
After my most recent update, the boot sequence hangs at:"a start job is running for Create Volatile files and directories" with a timer and no limit .. I let it go for 12 minutes, but nothing.It seems as long as this sequence remains, the boot process does not finish and just hangs here.I haven't been able to find anything specific to this. I currently cannot boot into this machine, though do have access to files via dual boot.
View 8 Replies
View Related
May 28, 2015
With "quiet" removed from the grub linux line, I'm getting the following error messages when the boot hangs up early in the boot process (19.768231 seconds into boot).:
input: HDA NVidia HDMI/DP,pcm=3 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=7 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=8 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
So, is this a NVidia issue or a sound card issue?
View 1 Replies
View Related
Jun 25, 2015
I use debian jessie 8.1 and when i boot it, pc start fsck block clean etc.. but the fsck control is activated every on boot?
View 14 Replies
View Related
Oct 14, 2015
When i'm tried google there is lots of bootlogd related document there. [URL] .... Yes there is documentation. But I'm only need "enable boot logging","reading boot log". Bootlogd not worked on jessie/stretch.
View 4 Replies
View Related
Apr 2, 2010
I'm testing out 10.04 on one of my partitions, and I love it. I have been using it exclusively for a while now, I have not logged into Windows since! Really don't care about windows anymore!However, yesterday I went to boot into windows... and I noticed the option to choose it is missing from my list! Maybe I'm just not getting to the correct list? The list I get shows like 5 different modes and versions of Ubuntu and something called Windows Recovery (which does nothing), but that's it.
View 9 Replies
View Related
Jul 3, 2015
I have installed debian jessie with debian first disk. During boot i see a service starts to raise network. It takes time. How can i stop it?
View 1 Replies
View Related
Jan 28, 2016
I have set up authentication when I am logging from my laptop using windows 7 (putty) into Debian server (see this post [URL].....) but since my laptop is dual boot (Windows 7 and Ubuntu) how would I set up authentication when i am using Ubuntu since from Ubuntu I will be logging into Debian SSH as same user that I am when logging from windows?
View 1 Replies
View Related
Feb 22, 2016
I've recently noted that the boot process in my Jessie installation is occasionally taking longer than usual, not dramatically as in "really hanging", but still noticeably slower, during which some messages are printed along the lines of
Code: Select alla starting job is running (2 of 5) and also after that, once lightdm (I'm using the MATE desktop) comes up the screen gets painted slower as well.
Unfortunately, once the system is up and running there's no longer trace in the logs (either traditional syslogs or journalctl) of such messages, however what comes to mind is that I've just recently enabled persistent logging in systemd: could this be the reason of such (occasional) slower boot process?
Other than that, what else could cause such behaviour? What should I eventually check to ensure things are OK?
View 11 Replies
View Related
