Debian Hardware :: Use The X-fi Xtreme PCI Express X1 Riser Board?
Feb 27, 2010
I've been through 4 Soundblaster and ESS sound cards now with no luck on the MSI P7N Diamond m/b machine. By design, its supposed to use the x-fi xtreme PCI express x1 riser board, but that doesn't want to work with any linux I have found, even though it does recognize via lspci and is supposed to be supported by the newest ALSA versions, which I tried according to the wiki. The machine won't even boot with the ESS AudioPCI 9752 board in it. It has an ES1370 chip on it.
The older PCI Soundblaster CT4810 with CT5880 chip on it did recognize via lspci but only works for 1 boot cycle with debian 5.04 or knoppix 6.01. It does work well with knoppix 6.2.1, which is where I might land with this machine if I can't get sound working on debian. The PCI Soundblaster Live! does not recognize via lspci. It doesn't even show up after a full from scratch reinstall.
So, will a USB sound card "just work"?
http://cgi.ebay.com/USB-2-0-3D-Virtual- ... 563813f87a
Or if not, maybe a cheap no name PCI card from ebay? I would rather not use my only PCI slot which would block install of better video cards, but:[URL].. Those are about the only thing I can think of that I haven't tried.
View 7 Replies
ADVERTISEMENT
May 6, 2010
I've recently installed Linux Mint 8 64-bit on my computer and getting my sound card to work. I've been searching around the internet for solutions but I know next to nothing about computer audio.
My sound card is a PCI Express Creative Sound Blaster X-Fi Xtreme Audio. Came with my computer. Told it uses the SB Audigy chipset. Using the onboard audio is not an option. The card shows up in Sound Preferences under the Hardware tab, but I cannot get sound from it. Here's what they told me to do:
Install the karmic alsa backports through the Terminal Install hidden Level 5 updates to update the kernel
Disable every audio device except the SB card (the others are onboard and HDMI) Check volume levels in alsamixer, PulseAudio Device Chooser and Volume Control I also tried to install the OpenAudio driver (not sure, will double check), which crashed Linux every time I try to activate it.
View 9 Replies
View Related
Dec 3, 2010
1. D-Link DWA-643 Xtreme N Express Card Adapter The onboard wireless for my HP tx1000z stopped working a long time ago. This wireless adapter is in my express card slot.
2.
Code:
$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
[Code]....
View 2 Replies
View Related
Aug 12, 2011
I am trying to install Xara Xtreme on my Debian:Linux Misery 2.6.32-5-amd64 #1 SMP Tue Jun 14 09:42:28 UTC 2011 x86_64 GNU/LinuxOn the Xara website it is writtn that binaries should work. However if I try to run any of binaries includednothing happens. I tried to do some instructions listed in installation guide for AMDx64 platforms, but when I try:sed 's:/usr/lib/:/usr/lib32/:' < /etc/gtk-2.0/gdk-pixbuf.loaders > /etc/gtk-2.0/gdk-pixbuf.loaders32I get:bash: /etc/gtk-2.0/gdk-pixbuf.loaders: No such file or directory
View 5 Replies
View Related
Mar 18, 2016
As a substitute for IDM, for linux this program comes in handy.. I want to know how to get it installed graphically
View 4 Replies
View Related
Dec 21, 2010
I bought the ION Tape Express to convert all my cassette tapes to mp3 on my computer. The software that came on the CD works fine in Virtualbox windows XP. I could be happy with this but would rather use Linux. The problem is Debian Squeeze sees the new USB device but I can't find a program that will record from it. I've tried gnome-sound-recorder, looked at k3b Audacity and several others. It might be because I don't know how to select the usb sound device.
chevy@debian:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c408 Logitech, Inc. Marble Mouse (4-button)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 006: ID 0a5c:2148 Broadcom Corp.
Bus 006 Device 005: ID 0a5c:4503 Broadcom Corp.
Bus 006 Device 004: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 006 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 006 Device 002: ID 0d8c:0121 C-Media Electronics, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
View 3 Replies
View Related
Dec 22, 2010
I have an HP Pavillion Elite HPE computer I just got for a server. It has an internal gigabyte on the mother board and I put in one pci express trendnet teg-ectx eternet card in before installing. It is using the realtek 8169 chip. I had the local network on this card and the pubic static ip on the built in ethernet port eth0. After the intstall of debian 5.07 32 bit I couldn't get the eth0 pubic access to work. I can't get into the server with sftp or ssh and openssh has been installed and I can get into it locally on the local network.
I then installed a second ethernet card the same as the local network card. Now the pubic is on the which is eth1 and the local is eth2. I can ping out to [URL] but I can't get into the server on the eth1 using ssh and I have a iptables firewall and I turned it off and I stll can't get in. I am thinking that the eth1 card I added after the install doesn't have the driver or something. nothing is hooked up to eth0 right now.
[code]....
View 3 Replies
View Related
Mar 5, 2010
I tried install Debian 5.04 on Alix 3d2 board (no VGA) but after boot i see only one line (Probbing EDD (edd=off to disable)... ok) and everythig stops. I'm doing this from this instrucion [URL] I'm looking working solution (Under Win or Linux) to install Stable Debian on Alix3d2 and 2d2 via network (PXE). I have microdrive drives for this boards
View 1 Replies
View Related
Jul 20, 2010
I was trying to get a SMART board to work with my install of Lenny on my iBook G4. By work with, I just need it to display what's on the iBook's screen, I don't need any kind of interactivity. Since it is an iBook, it uses a PowerPC processor, instead of an Intel, and the SMART board driver only works on an x86 processor, I can't use the driver provided. Is there any way to get this to work? I imagine that I need to edit the X.org configuration file!
View 1 Replies
View Related
Dec 16, 2010
Device seems to be configured ok. Sound is playing but i can't setup it to capture mic.
Some info.
Command: cat /proc/asound/version
[Code]...
View 9 Replies
View Related
Sep 2, 2010
Trying to make the switch to Fedora. For the most part, everything seems to be working fine so far. When I first logged in, I got a message about a kernel crash (with the red siren) but I was not able to send the error report. I have since updated Fedora with the latest updates and have not seen this again yet.
The problem is that I have no sound. I have unmuted the sound in the sound preferences, and it appears to be correctly detected in the hardware tab as:
[SB X-Fi Xtreme Audio] CA0110-IBG
My motherboard is an MSI P6N Diamond with onboard sound.
When I run the lspci -v command, the following is shown:
When I go to the ALSA website and click Soundcards, I see the following:
X-Fi Xtreme Audio (PCI)
CA0106
[PCI] snd-ca0106; [ ] supported [ ] not supported
I am using Fedora 64-bit Desktop Edition. I am also using headphones, as I do not have speakers to test with.
View 6 Replies
View Related
Apr 19, 2011
It's really incredible! And suprising at least using the standard X-Fi drivers from Fedora and Rhythmbox music player. Even with the most current drivers and X-Fi Crystalizer in Win7, the sound quality of my music collection is much much better in Fedora! High's, mid's and low's are crystal clear without all the added extra's I get from the Win7 drivers. Of course, the eq in Rhythmbox has to be setup a bit differently than the Creative Labs eq.Anyone else experiencing this with their soundcards/F14 ?
View 4 Replies
View Related
Jun 27, 2010
I've followed some instructions that I've found searching this forum and what I've concluded was that my audio plays only from the HDMI port of the VGA... Changing the settings around to use the SoundBlaster card does nothing. I've installed pavucontrol and setting the HDMI port to profile Off does nothing. When enabled the bar under the levels seems to play music. (It shows activity) But when I send the stream to the Sound Blaster the bar stays 100% and doesn't do anything. (no activity and no sound). I can't verify that the HDMI port actually plays out audio. I'm new to Fedora and linux all together. I've tried Fedora in the past F11 I think but that's all.
The "cat /proc/asound/cards" command produces this:
0 [HDMI]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfbaec000 irq 33
1 [Generic]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xfbbfc000 irq 16
The "/sbin/lsmod | grep -c snd" command produces this: 12
"Yum update" has been executed several times without the need to update anything.
View 5 Replies
View Related
Oct 12, 2010
i just installed a new Ubuntu 10.10, but i have no sound at all. I google-d for my problem, but i cant find any fix. In sound preferences - everything look great and working - there is my X-fi Xtreme audio CA0110-IBG, and i can choose how many channels to use, but when i go to test button, there are no sound from any channel. I got 5.1 sound system, and i use Flexijack for mic. Im confused, because everything looks like working - the system recognises my sound card, but there no sound at all. I tried to kill pulseaudio, but it not help me.
View 8 Replies
View Related
Dec 4, 2010
Just installed this card. Can't figure out what I need to do to get it to work. It's a pci express card.
View 5 Replies
View Related
May 5, 2011
I upgraded my ati 9200 with the HD5830. It was brand new from overclockers.On windows 7 it runs great, playing games for hours without any issues at all.But I cannot get it to work with any Distro at all. All I get is garbled graphics from the live cd's, mouse is garbled to.
I have Tried 64bit Ubuntu/Kubuntu/Opensuse/Mepis and 686 version of antiX.I will attach a screenshot of what a screen looks like from the live CD. The card is new and works in win 7 so the card is not faulty, but why can I not use any live CD with it? If I manage to work out the garbled graphics and install a distro its the same. Sometimes if I add "nomodeset" to the boot line I can see the screen perfect. But then trying to install ati drivers boots me to a command line.
EDIT: PC specs
Q6600 @3.0ghz
4gb DDR2 @833
HD5830 xtreme 1GB GDDR5
View 3 Replies
View Related
Apr 6, 2011
Whats the sound blaster xtreme audio pci module name ?
View 1 Replies
View Related
Jun 10, 2010
Does anyone know how well (or if) the Creative X-FI xtreme audio Expresscard is supported by ALSA?Unfortunately it isn't even on the list of cards at all on their site. I know that there are two versions of the card, the earlier version was silver and fit a 54mm expresscard slot, and the later version was black and was 34mm. As far as I know they both use the old CA010x chipset (the same as the old Creative Audigy 2 Cardbus card), but I have no idea if that driver in the kernel will even pick it up.This onboard sound on my laptop is just driving me nuts anymore and I need something else.My old Audigy 2 Cardbus card I had for my old laptop was great, but it's just that, a cardbus card.
View 7 Replies
View Related
Jul 12, 2010
Any G41 Express drivers for red hat
View 1 Replies
View Related
Feb 19, 2010
I'm trying to figure out whether my system supports PCI Express without opening up the box. lspci doesn't mention "Express" or "PCI-e" anywhere, but dmesg reports that a "PCI Express Hot Plug Controller Driver" is in use.
View 3 Replies
View Related
Jun 9, 2010
My dmesg is full of this messages:
Code:
[ 31.571682] +------ PCI-Express Device Error ------+
[ 31.571684] Error Severity: Uncorrected (Non-Fatal)
[code]....
View 2 Replies
View Related
Sep 22, 2010
I do not currently fully understand relationship between binary numbers and ip addresses and subnet addresses; nor am I asking for an explanation here at LQ, when there are plenty at wikipedia and other places...
Even after reading the wikipedia article on it, I still don't grasp it completely, so I was hoping that someone who grasps it in its entirety could answer a simple question.
How can I express the range of ip addresses from 172.22.22.200 - 172.22.22.230 ?
I was trying to make a rule for iptables that only did nat on that specific range of ips, and when i tried used the "-s" flag followed by 172.22.22.200/11 it always changes to 172.0.0.0/11 in the actual rule that is created and displayed by iptables -t nat -L.
I already have many hosts defined on my network, and rather than going through each one and changing its ipaddress to 172.0.0.#, I was hoping to learn a way to represent them in the iptables rule.
View 2 Replies
View Related
Jul 9, 2010
i have a problem "db2 express-c first steps fails to launch on ubuntu" then firefox appears it shows something like :
Quote:
First Steps was unable to connect to the online DB2 Information Center and could not find an instance of a locally installed DB2 Information Center for this version of the product.The use of First Steps to access product information requires one of the following types of connections to a DB2 Information Center. Internet access to the online DB2 Information Center A locally installed version of the DB2 Information Center Access to a remotely configured DB2 Information Center
View 1 Replies
View Related
Jul 17, 2010
Any Paltalk Express users out there?
This morning I tried to login to Paltalk Express (http://express.paltalk.com), but when I was about to write my password suddenly the screen turned black, and couldn't do anything else. I tried erasing the private data on my browser, restarting the browser, reloading, but didn't work.
I tried removing and installing flash, but still the same.
View 8 Replies
View Related
Sep 1, 2011
I found my web cam it is a Logitech Express cam I just want to know how to get the driver so I can use it in Firefox for like tinychat it works for cheese fine but That doesn't mean that it works for my web browser?
View 1 Replies
View Related
Jan 14, 2010
autoload a module in my pci-express slot for every boot.For me to load the module, i need to:(i) enter /ixpio directory in root's home.(ii) type "./ixpio.instCan I do an autoload by doing this?as root: edit /etc/rc.d/rc.local and put the lines:-"cd ixpio""./ixpio.inst"
View 2 Replies
View Related
Jan 28, 2011
I have installed db2 express-c on Ubuntu 10.04 server using apt-get; the installation is successful but I noticed that libasound2-dev package has been installed along with db2.I don't want this ALSA sound package, when I tried to remove it by "apt-get remove" it was trying to uninstall DB2 as well as there is a dependency. So, how do I remove ALSA package without removing DB2 ?PS: Also, db2 installed X11 packages like libx11-dev, libxproto-core-dev etc., which are also not need for me as it is a sever OS.
View 4 Replies
View Related
Nov 26, 2009
When I log in with shell It connects and reads the SSL on port 993. The problem is when I use SSL for the email client it gets the error on the email side and it doesn't work. Out going mail on the postfix works, and also incoming and outgoing on my actual server works. I have one email set up there for testing. I am really confused. This is not a self signed SSL either. I tried to create a dovecot.pem but it won't work. How do I create the dovecot.pem for a non-self signed SSL?
here is the path:
ssl_cert_file = /path/to/mail_domain_com.crt
ssl_key_file = /path/to/private/mail.domain.com.key
It should be:
ssl_cert_file = /path/to/dovecot/certs/dovecot.pem
ssl_key_file = /path/to/dovecot/certs/private/dovecot.pem
When I try to use the mkcert.sh it doesn't put the files in the places it should go. I did edit both the mkcert.sh and the dovecot-openssl.cnf.
View 1 Replies
View Related
Apr 26, 2011
I am going to separate records with the string, "[J.System Info]" in awk command.
Both of the following expressions don't work well.
Code:
RS = "[J.System Info]"
(or)
RS = "[J.System Info]"
View 1 Replies
View Related
Feb 17, 2010
Recently I installed ubuntu in my LG P1 express dual laptop, and got it working with the sound, webcam, and LAN. It took me a while, but I have learned a lot. The thing is, I cannot manage to set up wireless networking working. For what I read and discovered, it has to do with an internal RF switch that deactivates the wifi card. On windows, one may switch it on or off with fn+F6. However, that is not working on linux. How to access and change this switch with a command or something?
Nothing on BIOS about wireless. When I do
Code:
sudo cat /var/log/messages | grep -i wireless
I get:
Code:
Feb 17 20:08:34 XXXXX kernel: [27.889915] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Feb 17 20:08:34 XXXXX kernel: [29.163795] Kill switch must be turned off for wireless networking to work.
On doing: iwconfig, it reads:
lo no wireless extensions.
eth0 no wireless extensions.
So no wlan0 is listed.
However with "sudo lshw -C network" the network is there and the driver is loaded
*-network
description: Ethernet interface
product: ET-131x PCI-E Ethernet Controller
vendor: Agere Systems
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02 .....
View 9 Replies
View Related
