autoload a module in my pci-express slot for every boot.For me to load the module, i need to:(i) enter /ixpio directory in root's home.(ii) type "./ixpio.instCan I do an autoload by doing this?as root: edit /etc/rc.d/rc.local and put the lines:-"cd ixpio""./ixpio.inst"
View 2 Replies
Since I upgraded Jaunty from 2.6.28-13 to 2.6.30, I have to modprobe b44 by hand every time I boot the latter. I used the .debs in http://kernel.ubuntu.com/~kernel-pa/mainline/.I know I could just add it to /etc/modules or some .rc, but it loads without that in .28 and I really want to understand what changed (something else in /etc?) .
Code:
$ lshw -C network
...
[code]...
I've installed XBMC on Ubuntu using http://wiki.xbmc.org/index.php?title...-by-Step_Guide this guide. I've set it up to autoload. Now it's loadede every time I try to login. How can I remove autoload of XBMC.
View 4 Replies View RelatedI tried to install Fedora 10 with an encrypted root-filesystem on my Laptop. The problem was, that I wanted to install to the second hdd which resides in the extension slot of the laptop. I can either have the dvd-drive or the hdd in the slot. So I removed the internal hdd, and inserted the second one in its place. That way I could use the dvd. The installation went fine and I could boot into the OS. Then I removed the hdd again and inserted the original hdd to the internal slot, and the fedora-hdd in the extension slot. I can select during power-on from which hdd i want to boot, but I cannot boot fedora. After the first dialog, where I can enter the password to decrypt the disk, I get an error message (something like drive not found). I tried to change the grub settings in the /boot partition (which is not encrypted), but without success.
So, is there a way to boot the system? Or how do I install Fedora on the second hdd without the dvd-drive?
We're using condor at work to have cluster processing of java jobs. I know how to tell condor to require that a given job should be run on a particular slot. You can put on the Requirements string in the submit file a "Name" value(s) -->
Example:
Requirements = ".. Name == slot1@host*.domain.net || Name == slot2@host*.domain.net"
Which would tell condor to only run that job on slots 1 or 2. But what I need next is some way to have condor modify the arguments string depending on the slot it used. Our condor blades have 8 slots per machine but only two CUDA Tesla cards per host, so I want to dedicate slots 1 and 2 for using the Teslas and slots 3-8 for not using CUDA.
My java code has a java '-D' property so I can tell it to use CUDA or not, but then I
have to have a way to configure condor to append that to the job arguments if
the slot is 1 or 2 or not append it otherwise; So I want this arguments list passed for slot1 or 2
"Main.start -Djava.library.path=/usr/local/cuda/lib64 -Dcuda"
and this for slots 3-8:
"Main.start -Djava.library.path=/usr/local/cuda/lib64"
I don't want to just make the developers hack their submit files to put the
-Dcuda on the arguments line in combo with their adding the Name entry for
slot1 | slot2 because that seems error prone to me.
I want condor itself to add the JVM -Dcuda argument when it's slot 1 or 2 to reduce errors because these jobs take a long time and a mistake wastes lots of time.
I have a Toshiba a105-s2236 laptop and am trying to install Fedora 14. Is there any way to tell Fedora not to look for the pcmcia slots on boot? My live CD is freezing at the point where it tries to probe the pcmcia socket IO port.
I tried adding the 3 to get to a console, but that fails as well. I had to add acpi=off to the kernel boot args to even get it to go this far.
Even using the nopcmcia option, it still tries to probe the socket's IO port.
F12 on my aspire one (A110, the original 8Gb SSD model) works well with only one significant problem.
Suspend fails; the screen fades to black, backlight stays on, macine stops responding to keyboard/mouse/powerswitch and just hangs (for at least an hour... longest I left it). Only thing that works is a 5 second click of death on the powerswitch. Plus an FSCK on at least one occasion after reboot. I have not been able to check if SSH and shutdown possible (on vacation) plus have logs go to a tmpfs (to save my SSD) so no log info. Similarly I cannot confirm if this affects hibernate because I run without a swapfile (SSD again, i.5Gb ram installed and I have never come even close to running out of memory).
But I think I have the culprit anyway:[url]
As described there; shutdown fails if there is a mounted card in the cardreader slot (/dev/mmcblk0) My system has a 4Gb SDHC card in the LH slot with a single XFS filesystem; which has my homedir on it; if I unmount that filesystem (but do not remove the card) shutdown and restore appear to work properly. But if the filesytem is mounted I get the bsod. Linked bug suggests this is restricted to large filesystems (?SDHC?) but I have not fully confirmed, although that matches my situation.
Posting here to see if anyone has any further info/workarounds, to ensure the fedora crew are aware that this appears to affect F12 (and is a regression, F11 suspended fine) and make sure it is documented somewhere. The linked bug also states similar bad suspend activity on other netbooks.
I'll try some other variations (and see if it also happens with USB sticks/RH cardrader, and report back here.
When opening gedit as a user I get the following message
Gkt-message: Failed to load module "'pk-gtk-module"
If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt
This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.
How to clean this up so the messages do no appear?
I am using Redhat linux 5 version 2.6.18-164.e15 with platform i686. I need to add ntfs module. I execute following command
#modprobe ntfs
but it say FATAL: Module ntfs is not found.
The Linux have automatically found drivers for my ATI 4850.The only option that i don't see inside the control center of the Linux is where can i control the FAN of my VGA Slot ?
View 9 Replies View RelatedMy friend recently bought a memory upgrade for another friend, when i was round at his house i tried to install it for him. Usually this thing is fairly simple, just plug it in and go.
The problem is the second ram slot appears to not be working. i have tried each module on their own in the first ram slot, both working fine. I tried them both on the second ram slot, the computer seems to fail POST, (no case speaker or LED display, but the screen stays black)
also, putting them both in has the same effect. sorry about the [DOT] & [SPACE] but the link is broken otherwise Motherboard: Gigabyte GA-945GZM-S2 -- www[DOT]gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductI[SPACE]D=2467&ProductName=GA-945GZM-S2 RAM: (2x) Corsair VS1GB667D2 -- scan.co.uk/products/1GB-Corsair-Value-Select-DDR2-PC2-5300-%28667%29-240-Pin-Non-ECC-Unbuffered-CAS-5-5-5-15 User Manual: europe.giga-byte.com/FileList/Manual/motherboard_manual_ga-945gzm-s2_3.x_e.pdf
The clock rating on these modules are a little high for that board, but I thought they would automatically underclock at the very least for them to both work.
I tried to reset the CMOS, but couldn't find the jumper, so i just took out the battery for 5 mins, does it have the same effect?
My server has 1 - PCI-e 1x slot and 2 - PCI-e 8x slot. Can I plug a 1x sata card into the 8x slot? Will it work? or do you have to have a 8x card?
View 1 Replies View RelatedI've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
View 5 Replies View RelatedCan somebody tell me how to enable/disable a pci slot.I am trying to do a hotplug on the pci slot.Is it possible in Open SUSE? If its possible can somebody please tell me how to do it.I was doing some research and went over the following topics hwup, hwdown, sysfs, but nothing worked.My confidence on Linux OS is pretty high and am sure there should be a way!
View 1 Replies View RelatedEver since I upgraded to 9.10 I have had 2 green slots on the panel at the top of the desktop. Both slots have a lighter green bar that oscillates back and forth. I attach a screen slot with he slots circled in red. Looking at other desktops posting on the forums I gather this is not normal but I cannot find what causes it.
View 4 Replies View RelatedI have a dual boot HP laptop that has an SD/MMS/XD card slot as well as an Acer Aspire One netbook that has two card slots.
On my HP laptop the card slot works fine with Vista but is not recognised when I boot in to Ubuntu.
On my netbook the original supplied Linpus OS obviously recognised both slots, when I load Ubuntu only one slot is recognised.
I have a USB card reader for the HP and the Acer has two slots anyway
A linux box equipped with LSI MegaRAID SAS1078 controller has 4 SAS disks slots. Slots 1+2 holds disks that have been configured (using the LSI bios interface at boot time) as raid-mirror array (hence exported by the controller as one unique LUN). Slots 3 & 4 each holds disks that are not configured as RAID ("direct attached devices" or "raw devices"). The "scan order" numbers for each disk, as reported by the controller interface, are in the same order than the "slot numbers".
Grub (installed on MBR of slot 1+2 LUN) sees:
* slot 1+2 LUN as hd0
* slot 3 disk as hd1
* slot 4 disk as hd2
The Grub boot command says:
root (hd0,1)
kernel /vmlinuz-2.6.16 root=/dev/sda3
initrd /initrd-2.6.16.img
(hd0,0) is swap
(hd0,1) is /boot
(hd0,2) is /
The linux distro is SUSE (SLES10 SP2). Grub boots correctly (disks in slots 3 & 4 are empty, even no partitions; and as expected, grub tab-auto-completes hd0 with available partitions; on the other hand, grub also sees hd1 and hd2 with the the tab completion, but eventually without partitions behind).
Now the problem: The kernel loads, initrd as well with its bunch of modules, and then harddrives are detected by the scsi driver and there I see: ...
SCSI device sda: ...
sda: unknown partition table ...
SCSI device sdb: ...
sdb: unknown partition table ...
SCSI device sdc: ...
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 > ...
Indeed, shortly after, the sysinit fails mounting FS (because FSTAB addresses directly /dev/sdaN and not UUIDs nor UDEV persistent names). Please note that I do not want to use UUIDs nor LABELs (for personal reasons it's no use to detail here). I tried to change the disk order at the LSI raid bios level, but:
* this interface cannot change priority for LUNs, only for raw devices (and these raw device priorities are set according to slot numbering)
* Grub indeed sees disks correctly, so I think the problem happens only at the linux stage, not earlier.
I tried to look at UDEV persistent rules (in the /etc as well as in the initrd.img/etc after a cpio extract), but there is nothing human readable (nor any obvious aliases, like those we can find for eth cards for instance). It seems that linux sees hardware raid arrays after raw disks, though raw disks are in farther physical slots (and with higher ordering number on the controler) and hence orders them incorrectly. And that's not the behaviour I expect, since I thought the hardware RAID LUNs were seen exactly as raw devices at the linux level, so raid or not should not make any difference in the disks order.
All this story is rigorously reproductible after several boot attempts (i.e. no random discovery here). Is it related to existing udev rules (default rules from SLES10 SP2) I did not find? Or to some missing udev rules (explicit aliases) I should have added? Or to some other udev mechanism I should get rid of (or even get rid of udev completely!)? Or to something else (not udev related... perhaps the fact I also have LVMs and software raid management...)?
I have an Acer Aspire One "netbook" that has 2 SD slots. If I insert and try to mount an SD card post bootup it can't detect the card (not listed in fdisk -l, and no messages generated to dmesg). Almost as if the slot isn't functioning.
The weird thing is, if I boot the computer up with the SD card IN the slot, it picks it up no problem, shown in fdisk as /dev/mmcblk0p1, and I am able to mount it no problem. I am also able to unmount and remove the card and the SD slot continues to function normally. Although I can boot up the computer with the SD card in the slot with no issues, I'd like to be able to have that "slot" active on boot even if I don't have a card in it.
A few more details, Im running slackware 13 with fluxbox wm.
I have a sandisk cruzer 4gb and everytime i try to boot with it in the usb slot it doesn't get read. after bootup i have to pull it out and put it back in and then it recognizes and reads it. have usb device selected as first boot order and have even hit esc during bootup and selected usb as boot device. trying to install the unbuntu 10.10 on the netbook.
View 1 Replies View RelatedI've just installed the latest version of Ubuntu (11.04) on my Lenovo S10-3 netbook. Everything works just fine, except the mobile mobile broadband.
The system doesn't seem to recognize the (integrated) SIM card slot. The SIM card slot is already integrated (it's located under the battery). I can add a new broadband connection manually, but it still doesn't work (I can't select it from the available connections). If I open-up the additional drivers manager, it doesn't show me any available drivers.
from vuze(bit torrent client) it shows my total download speed to be 20.56 KB/s....while my network monitor tool shows a speed around 72.41 KB/s. Similar is the case with upload speed. In much simple words the download/upload speed that vuze shows appears to be less than that shown by the network monitor tool.I must mention that at the time vuze was running there was no other simultaneous downloads.I don't understand why this is so?Is there any tool that can give me the exact information of downloading & uploading speed or rather any tool that can give me the details of uploads/downloads presently going on.
View 2 Replies View RelatedI am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies View RelatedWhen I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
MY new install of 10.04 was working great on the iMac G3 . I was so impressed, but then my sound stopped working. I hear the "BONG" at start up but no sound in ubuntu.
View 4 Replies View RelatedAcer Aspire One Netbook 532h
Ubuntu 10.10
USB pendrive doesn't mount unless in USB slot prior to boot.
I want to know if there any way to find out interface of Linux Box(Suse 9>)is onboard or externally attached (pci slot)?
Note:- This is a problem which I am facing in my work. In onsite server we need to configure n/w card too. So some time when we configure, I'm confusing which interface should be configured. Client insisting us to configure embedded(onboard) interface. How to find out that.
My sd slot is not working at all, doesn't recognize it. I think it may have something to do with having the desktop version installed but I could be wrong. I was only introduced to linux 4 weeks ago and am not very familiar with it, but already know I like it more than windows! I have tried three different sd cards and they all work in my other laptop with Windows 7.
View 5 Replies View RelatedCode:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View Related
