Ubuntu :: Db2 Express-c First Steps Fails To Launch?
Jul 9, 2010
i have a problem "db2 express-c first steps fails to launch on ubuntu" then firefox appears it shows something like :
Quote:
First Steps was unable to connect to the online DB2 Information Center and could not find an instance of a locally installed DB2 Information Center for this version of the product.The use of First Steps to access product information requires one of the following types of connections to a DB2 Information Center. Internet access to the online DB2 Information Center A locally installed version of the DB2 Information Center Access to a remotely configured DB2 Information Center
I installed it yesterday. It worked well. I was able to log into windows without any trouble and restart into Ubuntu without a hitch.
This morning I launched Ubuntu as usual vi GRUB. I was asked to install about 135 upgrade files, which went withou an apparent challenges. I then went through the restart and noticed that there was an extra two choices in GRUB, but I just left it to launch Ubuntu automatically. Which it did.
I then messed about with the appearance settings. Noticed a some more updates were waiting which included 49 files. I went through the updating process and restart. GRUB worked well, and I was soon loggin in with username and password.
The Ubuntu Screen became visible with the flashing horizontal line and about 3 seconds later everything froze. I waited for several minutes - I timed them - but still no progress - everything remained frozen.
I switched off the machine completely, as I knew of no other way to get out of this situation. I rebooted and when GrUB launched I booted into windows 7 with absolutely no problems.
I used restart in windows and then allowed GRUB to boot into Ubuntu. Once more I was able to log in but soon after the Ubuntu Screen appeared and the horizontal line flashed for a few seconds, everything froze. This time I waited five minutes before switching off the machine by disconnecting at the mains.
I have done a clean install of Lucid netbook remix on a Dell mini-12 laptop.
Finally managed to get the broadcom wireless driver packages and poulsbo drivers to install correctly and decided to install all the offered updates.
After reboot I get the menu bar at the top but then desktop flashes between white and my background image for ages but does not give me the normal netbook tabs etc.
If I try a restart I get a pop-up saying 'Netbook Launcher is not responding'.
I have downloaded wubi.exe to my hard drive. After double clicking the exe and OKing the security dialog, I get a error message box titled: "pyrun.exe - No Disk"The error message reads:"There is no disk in the drive.Please insert a disk into the drive DeviceHarddisk3DR5.There are three buttons: Cancel, Try Again, ContinueClicking any of these buttons simply causes the same message box to pop up over and over. I cannot cancel this message or the process unless I reboot my computer. I guess the latest version of Wubi does not run on Windows 7 Ultimate.My computer:Intel Pentium I76GB RAM1TB Hard Disk
grabbed the latest from mozilla... thunderbird 2.0.0.22 i run: ./thunderbird and get this: ./thunderbird-bin: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
When ever i try to open a document or even just a blank page with openoffice I get this message from the automatic bug reporting tool
Package: openoffice.org-impress-1:3.3.0-19.2.fc14 Latest Crash:Fri 21 Jan 2011 05:50:48 PM Command: /usr/lib64/openoffice.org3/program/simpress.bin -impress Reason: Process /usr/lib64/openoffice.org3/program/simpress.bin was killed by signal 11 (SIGSEGV) Comment: None Bug Reports:
I really don't know what's going on here. I had Ubuntu 10.10 working great, and noticed 11.04 came out. I had been waiting a while and, for some reason, I decided to start with a fresh install rather than an upgrade.So basically here's what I've done so far:
- Installed Ubuntu 11.04 amd64 - Installed Opera, and XSensors (sensors-detect only detected my GPU and CPU, not mainboard this time. But I can live with that.) - Activated the FGLRX driver, rebooted. --- - Tried to launch Catalyst Control Center, received this error message: [Initialization error]
There was a problem initializing CCC Linux edition. It could be caused by the following.No ATI graphics driver is installed, or the ATI driver is not functioning properly. Please install the ATI driver apropriate for you ATI hardware, or configure using aticonfig.
Basically, the problem is, we have a bunch of computers in a computer lab, that we want to students to access, but not modify in ANY way. That includes backgrounds or whatnot. And after restart, any changes they may have made, change back. Also, they can't have read access to the administrator account on the computer.
This needs to give a permission denied, or something: Code: cd /home/(admin account username) ls
The Guest Session is exactly what we are looking for, but try as I might, I can't get it to work. Because, we don't want to have to login as administrators, then activate guest session, just for our students to use the computers. The idea being, we can leave the computers in there, and not worry about the students breaking anything.
One thread I tried was: [URL]. However, using his method, will log the student into the account, and after about 5 seconds, log them back out. The other method listed lower in the thread, Code: /usr/bin/guest-session Seems to work, but upon logging out, fails to launch the gdm
I have installed openoffice.org-base and openoffice.org-base-core in an updated fedora 14 environment. Clicking on openoffice-base in applications->office->openoffice-Base fails to lauch with the message:"This operation is not supported onhis operating ystem."Installation of mysql and mysql-server does not help.
I've never played with XBMC before and I installed it today on my openSUSE 11.2 64bit system using Yast. I found the package and installed it just fine, but when I try to launch XBMC from the applications menu, the screen flickers once but then nothing happens. Here's the output:
I am attempting to launch kate via kdesu as well as from the command line and it fails both times. I have (after the first failed attempt) coppied my .kde folder to /root and still am not able to launch it (it works fine under my login). The following is what I get after removing my personal .kde folder from root and launching kate: kate(16689): Session bus not found
KCrash: Application 'kate' crashing... sock_file=/root/.kde/socket-debian/kdeinit4__0 Warning: connect() failed: : No such file or directory KCrash cannot reach kdeinit, launching directly. drkonqi(16694): Session bus not found
Recently, for whatever reason (I am led to suspect a bad hard drive), Windows 7 failed to boot even in safe mode so I decided to just use a clear hard drive and install a far less troublesome OS, so I decided to try to use openSUSE. I used a backup laptop to download and burn the 4.7 GB release. Problem is, I haven't a clue how to get it to work. I thought just placing the burned DVD in when booting would be enough, but the BIOS keeps telling me it fails to launch from CD. Luckily, I had enough foresight to download a live CD just in case. I was able to install from the live CD, and when I checked the DVD, I was able to access all the content.
But I haven't a clue how to use it to upgrade/install all the extra software. Also, I should add I am completely new to this whole thing. While I have used Linux before, for the most part others dealt with all the administrative aspects of ensuring the system actually ran/had the needed software on it. Finally, I have one major restriction placed on this whole issue. I live out in the middle of no-where and the only internet I can get is limited to 200MB a day (I downloaded the CD/DVD elsewhere, but normally don't have a chance to do that). As such, being able to install from the DVD and not needing to download much software would be nice.
Fresh guest install of current as of changelog dated 16-Feb-2011, in to VirtualBox 4.0.4 (13.1 x86_64 host).
1. About 6 of the icons normally residing in the top half of Settings Manager are missing (names are their and functions work). Selecting 'Appearance -> Icons' and re-selecting the one choice available restores one, the rest remain MIA.
2. Default xfce Terminal launch fails with error <????> Re-selecting the default 'Preferred Applications -> Utilities -> Terminal -> Xfce Terminal' has no effect. 'Properties' shows the usual 'exo-open --launch TerminalEmulator'.
Setting 'Preferred Applications' to 'X Terminal' launches an xterm successfully as expected.
This morning I tried to login to Paltalk Express (http://express.paltalk.com), but when I was about to write my password suddenly the screen turned black, and couldn't do anything else. I tried erasing the private data on my browser, restarting the browser, reloading, but didn't work.
I tried removing and installing flash, but still the same.
I found my web cam it is a Logitech Express cam I just want to know how to get the driver so I can use it in Firefox for like tinychat it works for cheese fine but That doesn't mean that it works for my web browser?
Recently I installed ubuntu in my LG P1 express dual laptop, and got it working with the sound, webcam, and LAN. It took me a while, but I have learned a lot. The thing is, I cannot manage to set up wireless networking working. For what I read and discovered, it has to do with an internal RF switch that deactivates the wifi card. On windows, one may switch it on or off with fn+F6. However, that is not working on linux. How to access and change this switch with a command or something?
Nothing on BIOS about wireless. When I do Code: sudo cat /var/log/messages | grep -i wireless
I get: Code: Feb 17 20:08:34 XXXXX kernel: [27.889915] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection Feb 17 20:08:34 XXXXX kernel: [29.163795] Kill switch must be turned off for wireless networking to work.
On doing: iwconfig, it reads: lo no wireless extensions. eth0 no wireless extensions. So no wlan0 is listed.
However with "sudo lshw -C network" the network is there and the driver is loaded *-network description: Ethernet interface product: ET-131x PCI-E Ethernet Controller vendor: Agere Systems physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 .....
after about 3 12 hour days of messing with it, i'm nearly positive there is no way the onboard broadcom wireless is going to work. (it's an hp dv9000 running ubuntu studio 10.4)can someone recommend a wireless express card that will work out the box with no troubles?
I'm trying to figure out whether my system supports PCI Express without opening up the box. lspci doesn't mention "Express" or "PCI-e" anywhere, but dmesg reports that a "PCI Express Hot Plug Controller Driver" is in use.
I do not currently fully understand relationship between binary numbers and ip addresses and subnet addresses; nor am I asking for an explanation here at LQ, when there are plenty at wikipedia and other places...
Even after reading the wikipedia article on it, I still don't grasp it completely, so I was hoping that someone who grasps it in its entirety could answer a simple question.
How can I express the range of ip addresses from 172.22.22.200 - 172.22.22.230 ?
I was trying to make a rule for iptables that only did nat on that specific range of ips, and when i tried used the "-s" flag followed by 172.22.22.200/11 it always changes to 172.0.0.0/11 in the actual rule that is created and displayed by iptables -t nat -L.
I already have many hosts defined on my network, and rather than going through each one and changing its ipaddress to 172.0.0.#, I was hoping to learn a way to represent them in the iptables rule.
We have a PC in the office to which I have been granted to install Ubunto 9.04 on it. It has an intel graphic card Q45/Q43 Express Chipset.
I will proceed with the installation in a 1-3 weeks but I am expecting to have problems related to the graphic card not being seen or not configured ok.
Can you tell me how to configure it and what would its xorg.conf look like ?
Until I do the installation, I can use the Live-CD to test out your suggestions or do queries.
i somehow managed to get squid proxy server installed.My problem is my email in outlook express has stopped working (incomming pop3 server is mail.webmail.co.za)I think i need to install a pop proxy to get this going, can someone recommend a pop proxy that is easy to configure or anything else that could resolve this.
I'm having a confusing time with this webcam. When I plug it in, dmesg shows it is recognised and needs the module gspca_spca561
Code:
[ 6644.595789] usb 1-6: new full speed USB device using ohci_hcd and address 4 [ 6644.707379] usb 1-6: configuration #1 chosen from 1 choice [ 6644.752736] Linux video capture interface: v2.00
[code]....
However, there is no result in skype, ekiga, or awetv, although the device /dev/video0 is created. there was a kernel update from Ubuntu 2.6.24-23-generic to 2.6.24-24-generic, and the webcam magically started working, using a different module, gspca. However, after some celebration, I found that my usb tv dongle, which uses the dvb_usb_af9015 module, ceased working.
I corrected this by recompiling the dvb_usb_af9015 module, using source from http://linuxtv.org/hg/~anttip/af9015/ ----after another celebration, I found that the webcam had stopped working again, and I have not been able to make it work since, despite recompiling the gspca module from http://mxhaard.free.fr/download.html. Attempting to insert the gspca module produced from this gives:
Code:
insmod: error inserting 'gspca.ko': -1 Unknown symbol in module Another thing I've noted, is that the gspca module will work when I boot into earlier kernels (eg 2.6.24-21-generic).
I bought the ION Tape Express to convert all my cassette tapes to mp3 on my computer. The software that came on the CD works fine in Virtualbox windows XP. I could be happy with this but would rather use Linux. The problem is Debian Squeeze sees the new USB device but I can't find a program that will record from it. I've tried gnome-sound-recorder, looked at k3b Audacity and several others. It might be because I don't know how to select the usb sound device.
chevy@debian:~$ lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 046d:c408 Logitech, Inc. Marble Mouse (4-button) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 006: ID 0a5c:2148 Broadcom Corp. Bus 006 Device 005: ID 0a5c:4503 Broadcom Corp. Bus 006 Device 004: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass) Bus 006 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 006 Device 002: ID 0d8c:0121 C-Media Electronics, Inc. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
autoload a module in my pci-express slot for every boot.For me to load the module, i need to:(i) enter /ixpio directory in root's home.(ii) type "./ixpio.instCan I do an autoload by doing this?as root: edit /etc/rc.d/rc.local and put the lines:-"cd ixpio""./ixpio.inst"
I have installed db2 express-c on Ubuntu 10.04 server using apt-get; the installation is successful but I noticed that libasound2-dev package has been installed along with db2.I don't want this ALSA sound package, when I tried to remove it by "apt-get remove" it was trying to uninstall DB2 as well as there is a dependency. So, how do I remove ALSA package without removing DB2 ?PS: Also, db2 installed X11 packages like libx11-dev, libxproto-core-dev etc., which are also not need for me as it is a sever OS.
When I log in with shell It connects and reads the SSL on port 993. The problem is when I use SSL for the email client it gets the error on the email side and it doesn't work. Out going mail on the postfix works, and also incoming and outgoing on my actual server works. I have one email set up there for testing. I am really confused. This is not a self signed SSL either. I tried to create a dovecot.pem but it won't work. How do I create the dovecot.pem for a non-self signed SSL?
