Fedora Hardware :: No Sound - SB X-Fi Xtreme Audio
Sep 2, 2010
Trying to make the switch to Fedora. For the most part, everything seems to be working fine so far. When I first logged in, I got a message about a kernel crash (with the red siren) but I was not able to send the error report. I have since updated Fedora with the latest updates and have not seen this again yet.
The problem is that I have no sound. I have unmuted the sound in the sound preferences, and it appears to be correctly detected in the hardware tab as:
[SB X-Fi Xtreme Audio] CA0110-IBG
My motherboard is an MSI P6N Diamond with onboard sound.
When I run the lspci -v command, the following is shown:
When I go to the ALSA website and click Soundcards, I see the following:
X-Fi Xtreme Audio (PCI)
CA0106
[PCI] snd-ca0106; [ ] supported [ ] not supported
I am using Fedora 64-bit Desktop Edition. I am also using headphones, as I do not have speakers to test with.
View 6 Replies
ADVERTISEMENT
Oct 12, 2010
i just installed a new Ubuntu 10.10, but i have no sound at all. I google-d for my problem, but i cant find any fix. In sound preferences - everything look great and working - there is my X-fi Xtreme audio CA0110-IBG, and i can choose how many channels to use, but when i go to test button, there are no sound from any channel. I got 5.1 sound system, and i use Flexijack for mic. Im confused, because everything looks like working - the system recognises my sound card, but there no sound at all. I tried to kill pulseaudio, but it not help me.
View 8 Replies
View Related
Apr 6, 2011
Whats the sound blaster xtreme audio pci module name ?
View 1 Replies
View Related
May 6, 2010
I've recently installed Linux Mint 8 64-bit on my computer and getting my sound card to work. I've been searching around the internet for solutions but I know next to nothing about computer audio.
My sound card is a PCI Express Creative Sound Blaster X-Fi Xtreme Audio. Came with my computer. Told it uses the SB Audigy chipset. Using the onboard audio is not an option. The card shows up in Sound Preferences under the Hardware tab, but I cannot get sound from it. Here's what they told me to do:
Install the karmic alsa backports through the Terminal Install hidden Level 5 updates to update the kernel
Disable every audio device except the SB card (the others are onboard and HDMI) Check volume levels in alsamixer, PulseAudio Device Chooser and Volume Control I also tried to install the OpenAudio driver (not sure, will double check), which crashed Linux every time I try to activate it.
View 9 Replies
View Related
Jun 27, 2010
I've followed some instructions that I've found searching this forum and what I've concluded was that my audio plays only from the HDMI port of the VGA... Changing the settings around to use the SoundBlaster card does nothing. I've installed pavucontrol and setting the HDMI port to profile Off does nothing. When enabled the bar under the levels seems to play music. (It shows activity) But when I send the stream to the Sound Blaster the bar stays 100% and doesn't do anything. (no activity and no sound). I can't verify that the HDMI port actually plays out audio. I'm new to Fedora and linux all together. I've tried Fedora in the past F11 I think but that's all.
The "cat /proc/asound/cards" command produces this:
0 [HDMI]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfbaec000 irq 33
1 [Generic]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xfbbfc000 irq 16
The "/sbin/lsmod | grep -c snd" command produces this: 12
"Yum update" has been executed several times without the need to update anything.
View 5 Replies
View Related
Apr 19, 2011
It's really incredible! And suprising at least using the standard X-Fi drivers from Fedora and Rhythmbox music player. Even with the most current drivers and X-Fi Crystalizer in Win7, the sound quality of my music collection is much much better in Fedora! High's, mid's and low's are crystal clear without all the added extra's I get from the Win7 drivers. Of course, the eq in Rhythmbox has to be setup a bit differently than the Creative Labs eq.Anyone else experiencing this with their soundcards/F14 ?
View 4 Replies
View Related
Jul 28, 2009
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies
View Related
Dec 16, 2010
Device seems to be configured ok. Sound is playing but i can't setup it to capture mic.
Some info.
Command: cat /proc/asound/version
[Code]...
View 9 Replies
View Related
Dec 4, 2010
Just installed this card. Can't figure out what I need to do to get it to work. It's a pci express card.
View 5 Replies
View Related
Jun 10, 2010
Does anyone know how well (or if) the Creative X-FI xtreme audio Expresscard is supported by ALSA?Unfortunately it isn't even on the list of cards at all on their site. I know that there are two versions of the card, the earlier version was silver and fit a 54mm expresscard slot, and the later version was black and was 34mm. As far as I know they both use the old CA010x chipset (the same as the old Creative Audigy 2 Cardbus card), but I have no idea if that driver in the kernel will even pick it up.This onboard sound on my laptop is just driving me nuts anymore and I need something else.My old Audigy 2 Cardbus card I had for my old laptop was great, but it's just that, a cardbus card.
View 7 Replies
View Related
Aug 3, 2010
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
View 4 Replies
View Related
Feb 25, 2009
I've joined this forum because I couldn't find any answer anywhere else by searching the internet. I've installed a F10 64-bit default installation (with updates until 25 Feb. 2009), using nvidia latest proprietary driver, pulseaudio, kde4, proprietary flash 10 beta 64-bit plugin with firefox. When I play music on Myspace the sound dropouts randomly each 3 to 30 seconds when using my M-Audio Delta 66 soundcard.
I'm using the same configuration in F8 without this problem. After login (in F10) and some other times I also have a Kernel failure message: ALSA sound/core/pcm_lib.c:154: BUG: stream = 1, pos = 0xaaa, buffer size = 0xaaa, period size = 0xaaa I don't know if it has got anything to do with the dropouts. There are no messages in /var/log/messages when the dropouts occurs.
[Code]...
View 3 Replies
View Related
Jan 4, 2010
I am trying to use FC12 to edit multimedia projects for my work.
Right now I just want to edit some audio in Audacity.
I switched back to Linux after a few years, because it usually is "better" than Windows.
I cannot get any sound. I installed ALSA removed and reinstalled PulseAudio and everything else I could find in a forum, to no avail.
Linux tells me my sound card is: 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
I used to be able to play MP3s but that went away in the process of all this.
Is there one solution I am missing, or do I have to change everything around depending on what I am doing?
I would like to use Linux for this but deadlines might make me go back to the dark side....
View 2 Replies
View Related
Jun 18, 2011
I upgraded from 13 to 15 using preupgrade, and suddenly I don't have any audio / sound. I tried pavucontrol but it shows no hardware device available; alsamixer do show the hardware, though, as "HDA Intel". I attached alsa-info output. Running lspci I go this as audio device:
Quote:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
View 2 Replies
View Related
Sep 30, 2009
My wife is reluctant to move from WinXP so I started my own personal campain to promote fedora at home but my wife complains that I "spend too much time fidling with the thing(PC)" and that "it wasn't the case with WinXP" so I =was looking for ways to impress my wife with fedora's capabilities so I flashed her with compiz and dual screen using our old 52" projection tv as a DVR but rhe problem is that my daughter want to watch her DVDs and my wife want to watch a ..... video.I have a system with two Sound card one embedded on the main board and one on a PCI slot and what I am trying to achive is haveing two applications, like two instances of VLC play their sound on the souncard I select per instance, or one Sound card playing VLC and the other playing a ..... video's sound.
I have looked at pulse audio properties and it detects both of my sound cards just fine and it plays wonderfully on either but that is just it... it will pay on either but not both.I have read that you can configure pulse audio to use your second sound card as sorround or duplicate audio but the idea is dicrete audio from dicrete application. Is there such an use case already supported by pulseaudio?So there might be a solution if I disable Pulse Audio but I rather not but I'm open to either.
View 1 Replies
View Related
Mar 17, 2010
I've got a couple of odd issues in my 64bit install of Fedora 12. Firstly, I get some sound corruption when playing mp3s, video, in fact any audio. The first time a video or mp3 runs it seems fine, but for a certain time after-woods all i hear is weird static popping noises (hard to describe) with none of the original audio present. The problem seems intermittent, and can also happen when say i fast forward music of videos. I had this same issue under Ubuntu, and happens in both Gnome and KDE.I just experimented with fast forwarding an MP3. If I click some place along the progress bar it works fine. If i drag the bar it then corrupts the sound.
I also have an issue with multiple applications accessing the audio device at the same time. This is an issue I did not have under Ubuntu. The first app will work fine and play the video or music. However any other apps i start up will not do anything. As an example, if I have ..... loaded in FIrefox and have played a video, and then I load a video in the movie player on my desktop, it will not play the video until i quit firefox. I have tried all sorts of options with pulseaudio, including switching the virtual device on for multiple playback, but to no avail.I have not tried the 32bit version to see if this is an issue with 64bit and my PC.
View 3 Replies
View Related
Nov 17, 2010
I have just upgraded to Fedora 14, with some hope that a F13 kernel crash issue would be resolved. Alas, not, and I have lost audio in one of my sound cards. I am using 2 sound cards in my computer. The first one (VT 1708 on the M2V MX SE motherboard) is used for FLDIGI (ham radio program). The other one (Creative Labs SB Live!) is tied to a speaker/microphone. At some point in mid 2010, I started getting kernel crash reports (not sure which kernel version this started), and the VIA VT 1708 audio controller stopped working. The SB Live! card works fine.
From mesg, I get:
[9.181148] WARNING: at drivers/pci/pci.c:105 pci_ioremap_bar+0x2c/0x5b()
[9.181186] [<c05c36ad>] ? pci_ioremap_bar+0x2c/0x5b
[9.181194] [<c05c36ad>] pci_ioremap_bar+0x2c/0x5b
[9.181299] ALSA sound/pci/hda/hda_intel.c:2510: ioremap error
I've just pulled out the SB LIVE! card to see if it is causing the VT 1708 controller to fail...there appears to be no interaction.
From lspci -v, I get:
20:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 8290
Flags: fast devsel, IRQ 17
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
Kernel modules: snd-hda-intel
So it seems to know it's there. How to get my sound back (and get rid of this kernel crash every time I start my computer)?
View 1 Replies
View Related
Jun 5, 2011
My audio worked completely perfectly running Fedora 14. I upgraded to Fedora 15 and discovered my audio no longer worked. As far as I know I didn't change anything. I do hear random pops and clicks from my speakers every few seconds. It's a bummer because this worked out of the box on Fedora 14 without any screwing around, and now it's totally broken in fedora 15. Everything else about my upgrade has been going pretty well, but life without sound is not nearly as fun and it's frustrating to have something not work that used to work just fine.
Here is some information and things I've tried:
- Just for grins I booted from the Fedora 15 live CD and observe the exact same issue as I see when I boot from my HD (just pops and clicks out of the audio.)
- motherboard: ASUS M4A88TD-V EVO/USB3 (using onboard audio)
- lspci reports: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
- cat /proc/asound/card0/codec#0 | grep -i codec reports: Codec: Realtek ALC892 (this is what the motherboard manual lists as the audio hardware.)
- I've run pavumeter as some have suggested and I see outputs on both left/right channels when audio is playing (but still hear nothing but clicks and pops.)
- I've run "alsamixer -c 0" and verified all my levels are maxed out.
- I've opened up the sound settings dialog box and made sure the correct hardware device is selected, tried different profiles, tested left/right speakers, still no progress at all.
- I know I have the speakers on and plugged into the correct output jack, but just for fun I tried plugging the speakers into each of the other possible jacks, but that didn't help.
- lsmod (fedora 15) reports:
View 5 Replies
View Related
Dec 21, 2010
I want to run SoundRecorder (or audacity). I just want to create a small audio file. I can't seem to get the mike to record. I start the record function and expect to see changes in the "Level" indicator that correspond to sounds that I utter.
-Search of google shows lots on solutions for non fedora 14
-FAQ - no hits
-Musicians Guide is 248 pages long and I did not see a solution for this simple case.
I have installed jack-audio, audacity and dependencies.
View 3 Replies
View Related
Jan 26, 2011
I installed a fresh copy of Fedora 14 a few days ago. The default drivers for this device worked OK but I read on some forums that OSSV4 had improved performance/capabilities. I came across this thread on the forums which I followed. (incloded removing pulse audio) Since then I have visited almost every forum/site I can find to try to resolve my issue. I have reinstalled pulseaudio and editied almost all of the conf files I could find relating to the xfi cards.
I was worried that I may have changed a config file that I shouldn't have. I removed all of the pulse audio apps using: su -c "yum remove alsa-plugins-pulseaudio pulseaudio padevchooser pavumeter paprefs pavucontrol" and also removed the config backups so that on a new install they would be replaced. I will post any information needed to resolve this issue, my goal is preferably not to use pulseaudio and successfully be able to use my 5.1 analog audio system I am sure that the system is able to see the card, but loading the driver / sound utilities is not working.
View 3 Replies
View Related
Jun 5, 2011
I've got no sound. I'm not sure if I should post this in the hardware forum or not because i'm not completely sure that it might be hard ware. Here's the card that's in my laptop though. Raedon HD 4200 - RS880 Audio Device. And yes I made sure my sound was off mute.
View 7 Replies
View Related
Apr 18, 2010
the situation was that i had 2 fedora 12 boxen. one played flash videos with sound, and one did not! eventually i found the actual problem, and it was trivially fixed (i don't want to remember the many blind alleys i went into first...).
when i looked at
system ==> sound preferences ==> sound
and selected the 'applications' tab, i got the line:
"no application is currently running or recording audio.",
but the mute check box to the right of the 'output volume' slider at the top of the tab was unticked.
however, when i was running a flash video, i had a line:
"alsa plug-in (npviewer.bin) ..." with another mute check box on the right that was ticked! unticking this new mute check box, enabled firefox to play videos video's with sound!
View 2 Replies
View Related
Jul 23, 2009
I am trying to play sounds via : sound applet on gnome taskbar, right click: sound prefs, sound vol is set via applet at say 45%, yet I can't hear the alert sounds I am pressing such as, glass & sonar, is this common with pulse atm or a combo of that and my onboard realtek ac-97 sound chip?
View 2 Replies
View Related
Oct 1, 2010
I have installed Fedora 13 on my laptop, but there is something wrong with the sound。It just comes from both the computer and the headphone. I have installed alsa, you can see as follows:
[PDS@localhost ~]$ rpm -qa | grep alsa
alsa-lib-1.0.23-1.fc13.i686
alsa-driver-1.0.23-84.fc13.i686
alsa-firmware-1.0.23-1.fc13.noarch
report-config-localsave-0.10-5.fc13.i686
alsa-kmdl-2.6.34.7-56.fc13-1.0.23-84.fc13.i686
alsa-plugins-pulseaudio-1.0.22-1.fc13.i686
alsa-tools-firmware-1.0.23-1.fc13.i686
alsa-driver-devel-1.0.23-84.fc13.i686
alsa-lib-devel-1.0.23-1.fc13.i686
report-plugin-localsave-0.10-5.fc13.i686
alsa-utils-1.0.23-3.fc13.i686
Here are the screenshot of the sound preferences.
View 2 Replies
View Related
Nov 10, 2010
I noticed that any CPU load, while using Rakarrack guitar effects, causes the sound to distort and it generates loads of noise. This actually happens when using anything while running Jack audio. If I'm recording, I get tons of noise on the recorded track when I play it back (and live when monitoring) because any CPU usage seems to interfere with the signals. It even does it live in the playthrough (monnitor).
I realized it had to do with CPU usage when I noticed a pattern with the noise correlating to the plasma CPU monitor widget I had running originally. The noise refreshed when the monitor did. Since then, I noticed that anything that puts a slight load on the system will cause this disruption (even moving a window around, or anything in the background processes).
Anyone who is experienced with Jack audio, and possibly rakarrack as well, know the cause to this? I figured loading a low resource WM and eliminating unneeded processes can help but it doesn't since the recording program itself, while recording, is enough to cause this problem. (I know this because playing the guitar in Rakarrack, without recording and just using Jack to run the sound to the speakers, doesn't have constant noise but when recording, there is a constant noise)
View 9 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Jun 22, 2011
Strange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.
View 2 Replies
View Related
Aug 22, 2010
New Ubuntu installation with a big problem: no sound.
OS: Ubuntu 10.4.1
Hardware: HP Pavilion Elite e9150t (64 bit)
Sound card: Creative Sound Blaster X-Fi Xtreme Audio
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
[Code]...
View 9 Replies
View Related
Nov 21, 2009
I'm setting up a new PC and hope to use the Planet CCRMA packages for some simple home recording projects. The PC has a 64-bit processor, so I've installed the x86_64 version of Fedora 10. I've done the basic steps of adding the Planet CCRMA repositories and installed their real time kernel, so I'm think I'm ready to try and get started. First, I need to get my sound cards set up right. I have an M-Audio Delta 1010LT card, which I'd like to use for working with music and the Intel HDA card built in to the motherboard, which I'd be happy to use for things like system notifications and other incidental sounds. Here is what the system tells me about the cards:
[code].....
The only ones that produce any sounds when I test them are the HDA Analog device and the Delta 1010 device, but the weird thing is that output seems to be coming out of the built-in output jack (on the motherboard) in either case. Does the OS route output from the Delta 1010 through the built-in card to its output jack? Also, I've connected only the first two RCA analog outputs from the Delta 1010 to my desktop speaker system - should I use a different pair of outputs for testing? Playing a CD directly from the CD drive works, but playing music files from Amarok does not. I'll leave it at that for now. I posted the information above to the Planet CCRMA mailing list threee days ago, but I haven't gotten any responses.
View 1 Replies
View Related
Dec 24, 2010
when I press sound +/- button of my keyboard this gui thingy appears on the middle of my screen. Its transparent black, there is a speaker icon on the middle of it this thingy; [URL] ps: I don't want to kill or close it, I just want to know what is it. Which process which software and how can I hack it
View 2 Replies
View Related