Debian Configuration :: No Sound With ION Tape Express
Dec 21, 2010
I bought the ION Tape Express to convert all my cassette tapes to mp3 on my computer. The software that came on the CD works fine in Virtualbox windows XP. I could be happy with this but would rather use Linux. The problem is Debian Squeeze sees the new USB device but I can't find a program that will record from it. I've tried gnome-sound-recorder, looked at k3b Audacity and several others. It might be because I don't know how to select the usb sound device.
chevy@debian:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c408 Logitech, Inc. Marble Mouse (4-button)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 006: ID 0a5c:2148 Broadcom Corp.
Bus 006 Device 005: ID 0a5c:4503 Broadcom Corp.
Bus 006 Device 004: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 006 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 006 Device 002: ID 0d8c:0121 C-Media Electronics, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
View 3 Replies
ADVERTISEMENT
Apr 3, 2016
I have been using an LTO-5 Ultrium-3000 tape drive connected to an ATTO HBA without problem. I can control the tape drive using "mt -f /dev/nst0" and have been able to make successful backups using cpio, tar, and dump/restore. I followed some instructions on the web about how to install the HPE Library and Tape Tools application (version 4.21) which relies on conversion of a rpm to a deb file. The software seems to have been installed correctly and runs. However the hardware scan function does not recognize my tape drive. The following is suggested in the user manual if the tape device is not recognized by the software under Linux:
1. Login as root.
2. Edit the following file:
vi /etc/modules.conf
3. Add the following line as appropriate:
add options scsi_mod max_scsi_luns=128
4. Reboot the computer.
The problem is I don't have an /etc/modules.conf and am not sure exactly which file would be equivalent? If this is even the correct solution.
My tape drive is controllable and functions well using "mt -f /dev/nst0 status" so it seems to be a matter of LT&T software to detect the tape drive.
At the risk of providing too much info here some, possibly relevant, output from lshw
*-pci:3
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: b5
[Code] .....
View 1 Replies
View Related
May 6, 2010
I've recently installed Linux Mint 8 64-bit on my computer and getting my sound card to work. I've been searching around the internet for solutions but I know next to nothing about computer audio.
My sound card is a PCI Express Creative Sound Blaster X-Fi Xtreme Audio. Came with my computer. Told it uses the SB Audigy chipset. Using the onboard audio is not an option. The card shows up in Sound Preferences under the Hardware tab, but I cannot get sound from it. Here's what they told me to do:
Install the karmic alsa backports through the Terminal Install hidden Level 5 updates to update the kernel
Disable every audio device except the SB card (the others are onboard and HDMI) Check volume levels in alsamixer, PulseAudio Device Chooser and Volume Control I also tried to install the OpenAudio driver (not sure, will double check), which crashed Linux every time I try to activate it.
View 9 Replies
View Related
Apr 26, 2010
I want to know how to retrival partial files from a lto 4 tape instead of retrieving the complete tape.
View 2 Replies
View Related
Mar 8, 2010
I am looking at getting a DLT drive for my network; however, I have never used the tar command with a tape drive. What happens if the data is larger then 1 tape? Does the tar application automatically span tapes or do I need to use switches so it spans multipule tapes? Right now my Full backup will take 2 or 3 tapes.
View 3 Replies
View Related
Dec 8, 2008
I have dell poweredge 830 server with tape drive and RHEL 4 running on it....the issue i am facing is,i am unable to insert the tape as i had ejected the tape forcefully from it....
i tried to do a listing of the contents backedup on tape and it got struck in middle throwing below error,
/dev/st0:device input/output error. after which i was unable to eject the tape using
mt -f /dev/st0 rewoffl
i removed the tape by holding the eject button and now when i try to insert another tape, it's unable to take the tape in to tape drive...
I've tried doing all except reeboting the server, can any one help me out in this issue, hope the blow information may help in debugging the issue... code....
View 8 Replies
View Related
Mar 4, 2010
I have a tape deck which I have connected to my sound card (REaltek AC'97 Audio, is the info I could gather) and of course when I play a tape I'd like to hear it though my sound card. Problem is, it is not working.
My info: A double boot Fedora 12/WinXP SP3 machine. Please do note that when I boot into WinXP I do not have this problem, I can hear the music fine. Further, previously and with exactly the same hardware but with FC 6 it worked! In other words by upgrading from FC 6 to Fedora 12 I lost the ability to use my sound card this way (in Linux).
View 1 Replies
View Related
Oct 7, 2015
Since setting up a new rigg featuring an Asus Z170-A the internal soundcard does not play any sound. The integrated soundcard is a Realtek ALC892, as shown by aplay -l.
List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
[code]...
Additionally I find that on my laptop (where the sound works) "default Playback/recording through the PulseAudio sound server" when doing aplay -L. However no such thing mentioned on my stationary (where the issue is). Might there be some issues with the PuseAudio server?
Also the HDMI from my NVIDIA gfx card is identified. However removing the gfx card and using the onboard gfx does not change a thing.
I've also checked alsamixer and made sure that the soundcard is unmuted. I've looked around on google and among other tested the solution presented in URL...
View 8 Replies
View Related
Dec 22, 2010
I have an HP Pavillion Elite HPE computer I just got for a server. It has an internal gigabyte on the mother board and I put in one pci express trendnet teg-ectx eternet card in before installing. It is using the realtek 8169 chip. I had the local network on this card and the pubic static ip on the built in ethernet port eth0. After the intstall of debian 5.07 32 bit I couldn't get the eth0 pubic access to work. I can't get into the server with sftp or ssh and openssh has been installed and I can get into it locally on the local network.
I then installed a second ethernet card the same as the local network card. Now the pubic is on the which is eth1 and the local is eth2. I can ping out to [URL] but I can't get into the server on the eth1 using ssh and I have a iptables firewall and I turned it off and I stll can't get in. I am thinking that the eth1 card I added after the install doesn't have the driver or something. nothing is hooked up to eth0 right now.
[code]....
View 3 Replies
View Related
Feb 27, 2010
I've been through 4 Soundblaster and ESS sound cards now with no luck on the MSI P7N Diamond m/b machine. By design, its supposed to use the x-fi xtreme PCI express x1 riser board, but that doesn't want to work with any linux I have found, even though it does recognize via lspci and is supposed to be supported by the newest ALSA versions, which I tried according to the wiki. The machine won't even boot with the ESS AudioPCI 9752 board in it. It has an ES1370 chip on it.
The older PCI Soundblaster CT4810 with CT5880 chip on it did recognize via lspci but only works for 1 boot cycle with debian 5.04 or knoppix 6.01. It does work well with knoppix 6.2.1, which is where I might land with this machine if I can't get sound working on debian. The PCI Soundblaster Live! does not recognize via lspci. It doesn't even show up after a full from scratch reinstall.
So, will a USB sound card "just work"?
http://cgi.ebay.com/USB-2-0-3D-Virtual- ... 563813f87a
Or if not, maybe a cheap no name PCI card from ebay? I would rather not use my only PCI slot which would block install of better video cards, but:[URL].. Those are about the only thing I can think of that I haven't tried.
View 7 Replies
View Related
Mar 22, 2016
I use Debian Stretch (testing). After upgrading to kernel 4.4 the system doesn't see my main soundcard at all -- so, no sound. And now I also get this message every boot:
Code: Select allmodprobe: module microcode not found in modules.dep
View 14 Replies
View Related
Jun 7, 2010
I recently installed Squeeze. I had sound with the video driver that came with the install. Then I installed the Nvidia driver from Nvidia website. The sound dissappeared. When I uninstalled the Nvidia driver and removed xorg.conf and rebooted again, the sound came back. Then I installed the Nvidia driver from (nvidia-glx, dev and settings) from Debian with Synaptic. The sound went away again. If I uninstall the nvidia driver and xorg.conf the sound will probably come back again. The sound driver is the one that came with the install.
The volumes are unmuted in the alsamixer. Somehow alsaconf command does not work.
My mother board is a ASUS M4N78 Pro with Nvidia IGP.
What can I do to have sound with the nvidia driver?
View 14 Replies
View Related
Jun 30, 2010
I'm using Debian Lenny, the only problem that I have is that the sound card isn't recognize by the system, I have installed ALSA 1.0.20 and I followed several tutorials trying to enable my sound card (ATI tech Azalia (Intel HDA)but all tries fail.
So, after install another distro -debian based- in the same pc I figured out that the sound card is enable and running by default, the ALSA version is the same -1.0.20- but the kernel is different -2.6.31.xx- so my questions are:
1. do you recommend me to upgrade my lenny's kernel to fix the problem?
2. is there a way to upgrade specific packages -for example samba, alsa, kernel- using unstable or testing versions instead of upgrade the entire distro? actually I'm confortable with lenny
3. what configuration should I check in the "other" distro to use that parameters in lenny?
View 14 Replies
View Related
Nov 22, 2010
I have a sound card Sound Blaster Audigy SE, and I would like to know if this sound card is compatible with Debian under Pulseaudio or ALSA ?
View 8 Replies
View Related
Nov 27, 2010
I've recently installed stable (5.x, I think that's lenny...) on a laptop and there's no sound at all.
I had this problem years ago when I last installed linux on here. I solved it then and I thought the solution was unchecking "external amplifier" in alsamixer.
I believe my sound card (Intel 82801DB-ICH4) is detected and the appropriate driver loaded (snd_intel8x0) however, even running speaker-test produces no sound (no error either).
I've read that the intel hda have a model parameter found by greping for codec in /proc/asound/card? but I can't find any information about what codec is used in any path like that. Is there a model parameter for this card too? I'm on a philips freeline X10 laptop.
I ran alsaconf and nothing seemed to change. I tried alsactl init but the command init wasn't found, I suppose that must only be in newer releases. I installed libesd-alsa0 to replace libesd0 but that didn't help (should I revert this file? libesd0 says it's for oss). I also appended "options snd_intel8x0 index=0" to /etc/modprobe.d/alsa-base which got the card registered as the first device.
Here are the outputs of commands I've seen used:
[Code].....
View 14 Replies
View Related
Apr 20, 2010
apt-get suggetsed I should remove some packages I was no longer using. I've read the threads that explain this, but unfortunately I did that just now, not when I actually ran the damn command. I must say, however, that there were lots of things I wasn't actually using, so it was useful in a way. But there is a problem:
I have a Dell Inspiron 1525 and to get my sound keys working (the mute, volume up and volume down keys) I had to go to Settings-->Regional & Accessibility-->Keyboard Layout and there in Keyboard model I chose the option Dell Laptop/Notebook Inspiron 6xxx/8xxx. I know that's not exactly my model, but that made my sound keys work fine. Well, since I did the autoremove thing, that stopped working. I haven't got a clue what library was being used to get the sound keys working.
View 3 Replies
View Related
Aug 3, 2010
According to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
Here's the hardware: cat /proc/asound/cards:
0 [Intel]: HDA-Intel - HDA Intel
HDA Intel at 0xd6400000 irq 34
View 5 Replies
View Related
Aug 31, 2010
Ethernet, bluetooth and video work fine. I also managed to get the wireless card working by installling "firmware-iwlwifi". I can make the touchpad work sending to the kernel the parameter "i8042.nopnp" at boot time(grub), but then I get the computer frozen for a second every five second so I decided to use a usb mouse, until I get another fix.As you can see I can use the laptop except that...I have no sound at all, I can only hear something using headphones.I've been searching the web but the only thing I found is a fix in ubuntu using some kernel-modules from backports repository, but can't install them on debian.
View 2 Replies
View Related
Dec 16, 2010
I've just upgraded my kernel to 2.6.32 and I cant use sound anymore!!! My card was detected ,here is the output of lspci |grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
also frimware is installed ,gstreamer as well the sound is not on mute and it was working on the previous kernel .
View 2 Replies
View Related
May 13, 2011
Alsa is currently using my HDMI port to play sounds through using card0 "ATI R6xx HDMI". I'm on a laptop and I want to be able to use my laptop speakers and headphone jack so how do I set alsa to use card1 which is "Conexant CX20582"?
View 8 Replies
View Related
Jun 27, 2011
I have an acer timelinex 5830tg notebook. After weeks of frustration, i finally have a linux setup that is stable. Thank god for debian. I don't know why I mess with anything else. Anyway, i'm unable to get my built in laptop speakers to work. I get sound through headphone jack, and I hear sound coming from the built in speakers for a split second when plugging in/unplugging my AC adaptor.Let me know if there is any other output needed, which may assist in this issue. Hopefully someone can help me out.
View 3 Replies
View Related
Jul 14, 2010
Just when I thought my hardware configuring woes were put to an end, I don't have any sound. Here is my lspci list.
Code:
debian:~# lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
And the aplay -l
Code:
debian:~# aplay -l
* List of PLAYBACK Hardware Devices *
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
View 14 Replies
View Related
Apr 14, 2010
I'm trying to install an HP Storageworks 1/8 G2 Tape Autoloader onto my Debian Lenny machine. HP has "drivers and software" listed only for very specific versions of Linux and even then it's seems to be management software not drivers that is available. I'm a little on the green side of things still though getting better. This would be the first time I've had to go out of my way to make a piece of hardware work on a Linux server, so I'm not familiar with much. It's connected via SCSI card that is connected via PCI express. I'm starting to wonder if that SCSI card itself is not being detected and that problem has to be dealt with first. For example, get this running if HP only supports it for specific Linux OS's (Redhat, Suse Linux etc.) but not Debian?
View 10 Replies
View Related
Aug 16, 2010
http://forums.logitechio.com/t5/2-1-2-0 ... d-p/216711
https://bbs.archlinux.org/viewtopic.php ... 48#p374748
This may be a bit late for the OP, but I thought to post here, as this thread seems to surface when googling for Audiohub problems. I had this roughly 10-20 Hz ticking/popping constant noise as well, and it seems to be related to the fact that the speakers are connected through a USB hub, not directly.
After experimenting a bit with the kernel USB configuration, the noise went away when I unselected
USB_EHCI_ROOT_HUB_TT and USB_EHCI_TT_NEWSCHED at "Device drivers - USB support - EHCI HCD". I think it is the latter option that made the difference. This was on kernel 2.6.25.4. Although marked experimental, both seem to be selected on Arch kernel26. On older kernels (2.6.20-2.6.24) you may have to select USB_EHCI_SPLIT_ISO, but there I am just guessing.
The hardware volume knob still does nothing (I don't think there is a hardware mixer, probably it just tries to communicate the volume changing request to the computer). Does anyone have idea how to make this work, it's kind of sad to have one and not be able to use it?
View 1 Replies
View Related
Dec 24, 2010
Last month I found an old Seagate Hornet tape drive (STT20000A) with 2 TR-5 tapes at a thrift store. After sitting on a shelf at my place until last week I put it in an old system and installed Debian 5 on it. After a long time of working on it and never finding any useful help newer than 2007 I'm about to put it on eBay. So, here's a few questions:
Can this work in Debian 5 or should I put 4 or older on the system? If I put older linux on it, could I still get ide-scsi module working? apparently it has be obsolete for some time. The main problem is that it locks up the system when I try to write to it.
View 2 Replies
View Related
Aug 24, 2011
i set up an ltsp server on debian squeeze. after a standard installation, sound doesn't work on clients.
[code]...
when i start iceweasel normally (executed on server side), i get sound on the client. when i start ltsp-localapps iceweasel, i get no sound on flash sites and videos videos.what's wrong ? with local apps, is it possible that the flashplugin-nonfree doesn't talk to alsa ?
View 1 Replies
View Related
Oct 2, 2015
how to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.
Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
[code]....
View 3 Replies
View Related
Jun 21, 2009
I seem to be having sound issues on CentOS 5. When I run the sound card configuration, my sound card is recognized and the test sound plays fine but there is no sound coming out of any applications. This just started today and I have made no changes to my computer or installed any new software.
Below is the output from lspci :
View 4 Replies
View Related
Mar 30, 2010
I have a Logitech X-540 5.1 surround sound system for my ubuntu 9.10 64 bit box. When I go into sound from System -> Preferences -> Sound, I set the onboard sound card to 5.1 Analog Output. When I do this, all the of the audio I listen to from Banshee and VLC has a light jingle to it, kind of like constant sleigh bells (they're definitely not supposed to be there.) However, when I change it to anything other than 5.1, say stereo, 5.0, 4.1, or 7.1 (I keep it on 7.1) it works just fine. I'm using ALSA to output sound, could this be the cause of this? I haven't found anyone else with the same problem online, so I'm not really sure what's going on.
View 3 Replies
View Related
Nov 18, 2010
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
View 6 Replies
View Related
