Debian Configuration :: 8.1 - Keyboard Doesn't Work On Resume From Suspend
Jun 19, 2015
I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:
Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics
First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.
I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.
Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.
I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.
View 6 Replies
ADVERTISEMENT
Sep 28, 2010
I have Debian Squeeze x64 on ThinkPad T61p with standard 2.6.32-5-amd64 kernel. thinkpad_acpi loaded as module, suspend to RAM works fine from menu in KDE as well as by closing the lid, however machine doesn't appear to react on pressing Fn+F4 which should put it to sleep as well. I've read through thinkpad_acpi documentation and asked Google but so far can't find the solution. Can anyone, point me in correct direction?
View 6 Replies
View Related
Jan 27, 2011
I have installed squeeze on a HP notebook. I have one small problem though.It does not resume from suspend. If I shutdown -> suspend, or close the the lid, or shut downs (suspends) as expected, but whenower it backup up, the screen just stays black.Hibernate is working fine.
output of lspci (if needed)
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]...
View 14 Replies
View Related
Jan 10, 2011
I have just joined the Debian community, for the past 2 years I have been using Linux Mint (ubuntu), I am now using Linux Mint Debian 64. I have a Lenovo A700 ideacentre with a Broadcom 4313 WiFi card. I manage to get the card working, now I have a new problem. If I suspend the machine the WiFi will not connect on resume. Is there a simple command I can use to getting the connection restarted, or better yet a work around so it will restart on its own?
View 14 Replies
View Related
Aug 27, 2011
I'm having problems with resume after suspend to RAM. The machine starts to wake up, but the screens (multi mon VGA and DVI setup) are black and the keyboard doesn't light up. After ~20 seconds there's some brief disk activity and then the computer reboots. 100% repeatable with affected kernel versions. My test method is simple, I boot the machine on the kernel's recovery option, log on as root and run "PM_DEBUG=1 pm-suspend". I haven't found anything in the logs after a failed resume.
Here's the situation:
I have a SSD disk. To get TRIM support I have to use kernel 2.6.33 or later, which means that the standard kernel in Squeeze is too old.I have Nvidia graphics, and there was a change in 2.6.34 that breaks older versions of xserver-xorg-video-nouveau (version 0.0.15, used in Squeeze), I can't use Debian Squeeze with a kernel newer than 2.6.33.x.My machine (XFX GeForce 9300 motherboard) won't resume from suspend to RAM if I use a kernel newer than 2.6.36. There are no BIOS updates available.
My options:
Install newer kernel from Squeeze backports (2.6.38.2 last time I tried). <--- Not doable b/c of resume problems. Upgrade to Wheezy, which uses kernel 3.0.x. <--- Not doable b/c of resume problems.Compile a vanilla kernel. So basically I'm forced to compile my own vanilla kernel, 2.6.33.x on Squeeze or 2.6.35.x on Wheezy. I won't be stuck with an unsupported kernel version in the near future, but so far I've failed miserably.
I know that the latest kernel version where everything works is 2.6.36.x (no longer maintained), 2.6.37.0 and later cause resume problems (I've tried 2.6.37, 38, 39 and 3.0.0, .0.1). I've tried doing a git bisect on the kernel, but didn't succeed, ended up on 2.6.36-rc5 which is weird considering that 2.6.36.4 works. There may be several suspend/resume bugs in different kernel versions that messed up the bisecting results.
View 2 Replies
View Related
Jun 8, 2010
I cant log in as user. My keyboard doesn't work, not even ctrl+f1. So i cant get dmesg....Only thing that is working is alt+print screen+REISUB.
When i booted in safe mode from grub i can log in but only if i enter my root password. And then do /etc/init.d/gdm start.
If i tray to continue straight to gdm in safe mode my keyboard is not working so i can`t log in.
Day before i notices`d that i cant log in with ctrl+f1. When i tray i get this masage madone-desktop login: madone /bin/sh : cant open madone
View 1 Replies
View Related
Aug 7, 2011
Lately I upraded my Debian using aptitude update/aptitude upgrade - including installing a new kernel (3.0). Since this upgrade I have strange problem with networking. When I suspend my computer and resume it, I do not have connectivity with network:
$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable
[code]....
View 2 Replies
View Related
Aug 6, 2010
I am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
View 3 Replies
View Related
Apr 28, 2011
Hybernate does not work on my laptop. I receive the following error in the log: Running hook /usr/lib/pm-utils/sleep.d/30s2disk-check hibernate hibernate:
INFO: checking for suspend-to-disk prerequisites...
ERROR: no resume parameter on kernel commandline, can not suspend
View 3 Replies
View Related
Jul 18, 2010
I'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
View 9 Replies
View Related
Feb 20, 2010
When I suspend my computer and then resume later in the day my USB keyboard locks up. The only way I have found to reset the keyboard is to disconnect the USB cable from the USB port and then reconnect it.
View 9 Replies
View Related
Nov 15, 2009
When I resume my system after choosing the "Suspend to RAM" option, the login prompt appears but the keyboard doesn't work at all. (Caps/Num/Scroll don't light up either) The mouse, however, works fine and I'm able to click on the on-screen elements. Since I'm not able to login, I'm forced to reboot and abort the session. Note that this does NOT happen with the "Suspend to Disk" feature. (ie, it works fine).
System Specs:
openSUSE 11.2 KDE4.3 x86_64 (updated)
Sony VAIO VGN-CS17G
View 6 Replies
View Related
Feb 22, 2010
In Windows I can get my computer to resume from sleep mode by pressing any key on the keyboard. My keyboard is a Logitech G15 (USB).
How can I get this functionality in Ubuntu?
View 1 Replies
View Related
Sep 6, 2011
I've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect)
I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in
When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
View 3 Replies
View Related
Apr 11, 2010
The PC is a Toshiba laptop model# x205-s9359 running 11.2, KDE 4.3.5. Its video card is an nVidia 8700 GT. For two years now I've been plagued by random flashes, flickers and even missing scan lines on my screen when I use the nVidia drivers (up to and including 195.36.15), so lately I've been using the nv drivers. I miss the effects, etc. but I can live with that. At least I can get my work done, even if the display isn't as fancy as I'd like.
- When I run the nv drivers I can't suspend the PC to RAM or Disk. This means a lot of wasted time waiting for the machine to shut down and reboot every time I leave my desk for any length of time. If I try to suspend to RAM the only thing that happens is that the network connection disconnects then reconnects immediately. Here's the log file....
- If I try to suspend to Disk the PC appears to suspend as expected, but when it resumes it hangs before restarting X, and there's no keyboard or power button response. I have to use alt-prtsc-reisub to reboot. When the reboot is complete the screen shows all the windows, etc that were present before the suspend. Here's that log file....
-When I run the nVidia drivers the suspend/resume functions work perfectly, but I have to put up with all the problems described above. Here's the log file for Suspend to RAM with nVidia, and here's the one for Suspend to Disk.
I've spent hours searching for clues in these forums, on the openSUSE.org site in general, at KDE.org and with Google and I'm sorry to say that most of I've found is horribly out of date, and/or it's way over my head. or (worst of all) not even dated, so I've no idea whether it's current info relevant to my situation or so out of date that I might do real harm if I were to trust it. (RANT: Is it too hard to put a date on an article?... end of RANT) I'd be quite content to use the nv drivers if I could solve the power management issues, but I'd be equally happy to solve the flickering etc. with nVidia drivers.
View 2 Replies
View Related
May 18, 2009
My computer have ATI X600 graphics card installed, and I installed CentOS5.3.
Every time I suspend my computer and then resume it, it seem the graphics card can't resume and the monitor says 'no signal', but the system still responses, I can use keyboard.
Is there any configuration I can't do to make it resume normally? I've searched a lot in Google but can't find out any one else run into the same problem.
Information about the card:
Quote:
View 5 Replies
View Related
Mar 10, 2010
I have an issue with my Sony vaio fw31e not resuming from suspend. Reported this as a bug: [URL] The usual ways of suspending, from the kde 4 menu, from the power/battery widget or by lid closing always result in no resume. However, running pm-suspend from a root terminal suspends and resumes just fine. My question is, how does one delve into the way that the usual methods initiate suspend? Maybe if I could find out what each of these methods actually does, I may be able to see what is going wrong? I had been running squeeze on this lappy since July 2009 with no suspend issues until an update broke it sometime in January. The install is being fully upgraded every day at the moment.
View 11 Replies
View Related
Oct 9, 2015
I have a quite simple installation of Debian 8 Jessie XFCE and the resume from suspend is not working 9 out of 10 times. The system is single booted if that matters. I have found a few solutions to this problem but they were not suitable to my case as I don't have an Nvidia GPU but only Intel Onboard:
Code: Select all# lspci -v
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
Subsystem: Hewlett-Packard Company Device 2818
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0b <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 2818
[CODE]..
When I try to resume, I can hear the system booting but I can't see anything on the screen and the keyboard is not working either (no light on Num Lock and Caps Lock). The only option is to press the power button for a few seconds to stop the machine and then push again to start booting again.
View 13 Replies
View Related
Jan 28, 2010
Up until a couple days ago, my computer had no problems suspending to ram. However, now when I suspend, and later hit a key on the keyboard (usually space) to resume, all I see is an illuminated black screen. I can't even open a tty via Ctrl+Alt+F1. I can however ssh into the machine.he only possibility I can think of is that I am no longer running kdm. I just use "startx" to star an openbox-session.
View 8 Replies
View Related
Jan 5, 2011
My Acer Aspire 7552 laptop is running Debian Testing (just the main repos, no contrib or non-free). For some reason, it takes over five minutes to resume from suspend, and an absurd period to come back from hibernate (well over half an hour). Has anyone encountered this problem before, or have any tips on how to fix it? For the time being, I'm completely powering off every time I close my laptop because it's faster that way.
Output of lspci in case it helps:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
[code]...
View 1 Replies
View Related
Jul 5, 2011
I just installed Debian Testing (with Xfce) along side Win7 on my Dell XPS M1530 and now neither my keyboard nor my USB-mouse work at the login screen. Both worked perfectly during the installation and Grub as well recognizes my keyboard. The Numlock-LED can be switched on and off during the boot, but fails to work at the login screen.
View 2 Replies
View Related
May 11, 2015
Fixing my chronic suspend/resume problems turned out to be easier under systemd, but like everything else lacks documentation.
To suspend rather than power off when pressing the power button, I edited /etc/systemd/login.conf
uncommenting this line and changing it to suspend:
HandlePowerKey=suspend
and uncommenting the line
HandleLidSwitch=suspend
Some services were lost on resume. This problem seems common. To run a command on resume, I believe you have to make your own script, and create a systemd file to run it.
My script is /home/james/.bin/james-resume.service, which contains:
#! /bin/sh
/sbin/hdparm -B 255 /dev/sda
This must be executable. Ownership doesn't seem to matter.
To run it, I made a file in /etc/systemd/systen/suspend.target.wants
The file name must match the script name:
/etc/systemd/system/suspend.target.wants/james-resume.service
This contains:
[Unit]
Description=Run James jobs at resume
After=suspend.target
After=hibernate.target
After=hybrid-sleep.target
[Service]
ExecStart=/bin/bash /home/james/.bin/james-resume.service
[Install]
WantedBy=suspend.target
WantedBy=hibernate.target
WantedBy=hybrid-sleep.target
Ownership must be root.root. Apparently it doesn't need to be executable.
Then enable with:
sudo systemctl enable james-resume.service
and check with:
sudo systemctl status james-resume.service
If it says the service is loaded, it's OK -- inactive only means it's done running.
View 7 Replies
View Related
Jun 22, 2011
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
Tue Jun 21 23:07:28 AKDT 2011: Running hooks for resume
[code]...
View 8 Replies
View Related
Sep 10, 2011
I have an Atheros wireless USB dongle that will connect to my Wifi network just fine in Gnome but in KDE doesn't. I've read through the http://wiki.debian.org/WiFi/HowToUse and have installed all packages and tried all methods noted there but still can't get the wlan0 to work at all in KDE. Is wireless in KDE & Debian Squeeze useless?
View 3 Replies
View Related
Nov 20, 2015
So, as per Arch Linux's wiki, I tried to make some optimisations to the intel driver through setting it up in Xorg.conf (or as advised by that wiki article, in '/etc/X11/xorg.conf.d/20-intel.conf' ), but I've ran into trouble enabling DRI3. Here's my current config file:
Code: Select allSection "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "SNA"
Option "DRI" "3"
Option "TearFree" "true"
EndSection
So far everything works fine, I haven't seen any noticeable tearing, nor did I had any problems with any graphics-intensive programs I run, but there's a slight problem with the DRI3 part as indicated by Xorg's logs:
Code: Select all[ 26.556] (II) Loading sub module "dri2"
[ 26.556] (II) LoadModule: "dri2"
[ 26.556] (II) Module "dri2" already built-in
[ 26.556] (==) Depth 24 pixmap format is 32 bpp
[ 26.616] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 26.616] (==) intel(0): Backing store enabled
[Code] ....
First of all it still mentions the DRI2 driver, is this supposed to happen, or did something go wrong? Also it complains that it cannot find a file, which I can't figure out which package it belongs to, and taking a quick search around the interwebs hasn't produced anything useful...
The IGP is the CPU, which is actually a i5-4460... which according to Wikipedia it has a HD Graphics 4600 GPU.
View 3 Replies
View Related
Feb 14, 2011
My net-book is working properly with Debian squeeze 2-6-32-5-686, only the wlan does not work. After typing lsusb I have got the message: lsusb : Bus 002 Device 002 : ID 160a:3184 VIA Technologies, Inc. VIA VNT-6656 [WiFi 802.11b/g USB Dongle]
So I obtained the driver package : VT6656_Linux_src_v1.19_12_x86. I followed the instructions ( make install... ) - but the result is only a lot of error messages. Mayby I am using the wrong driver package for the squeeze kernel - I don't know.
View 9 Replies
View Related
Jun 21, 2015
i created a second instance of postfix.It isn' t the first time that i made this procedure but with debian i had a lot of problem.I think that the problem is chroot configuration of postfix .In the first i had two problem smtp “fatal: unknown service: smtp/tcp” and the second instance was enable to make nslookup of domain.I copied the necessary file in /var/spool/postfix-second-instace and i solved the errors.Now the problem is that there aren't error in log file but connect to xxx.xxx.net[yyy.nn.yyy.yyy]:25: Connection timed out for all connection. and the email are all in defer directory and the second instance doesn' t send emails.
View 4 Replies
View Related
Mar 27, 2016
Debian configurating, so I try to use wifi adapter, but it doesn't work. I have installed Debian Jessie from netinst CD. To reach perfect speed no options were selected. After I installed xfce4 and xfce4-goodies.I follow some different instructions and no dice. Wicd show me no avalable wifi connections. used Ubuntu 14, Ubuntu 12, etc. and I didn't have any problems with wi-fi connections. Some outputs of comands...
Code: Select allsatyva@meliorD:~$ cat /etc/debian_version
8.3
Code: Select allsatyva@meliorD:~$ lspci | grep 4313
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
[code]....
View 4 Replies
View Related
May 2, 2011
last week while I was using ssh to the computer1 inside a NAT as usual, I made another tunnel from the computer1 that I was connecting to, to another computer2 inside that NAT (ssh 192.168.1.130) and after making some changes in computer2 I typed reboot. The computer2 rebooted but the tunnel totally hung and I had to kill it in my laptop. Since that day I haven't been able to ssh to the computer1 as I am used to.
Here is some more information:
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/une/.ssh/id_rsa
[code]....
View 3 Replies
View Related
Dec 15, 2010
I recieve the following error:
Cannot find swap device, try swapon -a
/bin/echo: write error: No such device
If I type swapon -a, I get something like this:
swapon: cannot find the device for UUID=4d79c009-9464-41d5-9f78-90644bca9ba3
It worked great before I did the upgrade... I've upgraded to 2.6.37-rc5.
View 11 Replies
View Related
