Ubuntu :: Add RealTek ALC880 Driver So The Sound Will Work?
Oct 9, 2010
Sound works with Jaunty Jackal. Does not work with Lucid Lynx. It appears that Lucid Lynx will only acknowledge that I have a modem as a sound card. I just want to add my RealTek ALC880 driver so the sound will work. I've made sure that I have audio privileges, I made sure that nothing is muted using alsamixer. I've been looking at threads and documentation for four days just to fix the sound issue and so I can be prepared in case this 'feature' ends up being continued in Maverick Meerkat and when I upgrade I can use M.M. with minimal fuss.
View 1 Replies
ADVERTISEMENT
Apr 3, 2010
I can't get any sound to come out of my laptop through Kubuntu. Please help me by giving me step by step instructions, because I'm a total noob at such things. I've went through the Comprehensive guide as well -to no avail. to sum it up:
Kubuntu 9.10
Realtek ALC880
No sound
View 5 Replies
View Related
Apr 6, 2010
I'm using openSUSE 11.2 KDE on a Fujitsu-Siemens Amilo Pi 1536 laptop. My problem is that my microphone (I'm attempting to use a 3.5mm headset) doesn't work. Audio playback however does work through the built-in speakers and headphones.
I have gone through the SDB:AudioTroubleshooting - openSUSE as suggested by oldcpu on the Welcome to multimedia sub-area sticky.
I have tested audio recording with
Code:
arecord -vv -fdat foo.wav resulting in a silent recording. The vumeter showed 0% during the recording.
Here is my url produced by the alsa-info script:[URL]
rpm -qa '*alsa*'
Code:
alsa-plugins-1.0.21-3.3.i586
alsa-1.0.21-3.2.i586
alsa-oss-1.0.17-25.2.i586
alsa-devel-1.0.21-3.2.i586
[Code].....
View 10 Replies
View Related
Oct 4, 2010
I want to install this URL...How to? Because i downloaded the tar.gz2 format of it.And i dont know what to do.
View 2 Replies
View Related
Jan 15, 2011
I tried to install the latest RealTek driver for Linux and it has wiped all my devices. I've tried reinstalling the alsa-base packages but it hasn't worked
View 4 Replies
View Related
Jul 11, 2010
I recently installed realtek sound driver software in my system,
but after installing it,the speakers are not working....
I'm using fedora 13(x86_64).
i just want to make my system speak,like before....
how to make my speakers work ?
View 3 Replies
View Related
Jan 7, 2011
i have MB:Gigabyte 770t USB and Cpu Phenom II x2 555 BE My sound card didnt work and i have no sound at alll. only hardware that reconized as sound output in my sound setting is 5700 series HDMI which blong to my VGA.
View 9 Replies
View Related
May 19, 2011
Basically what the title says.I have an ASUS P7P55 WS SUPERCOMPUTER motherboard with the latest BIOS.
View 2 Replies
View Related
Jun 23, 2011
I just performed a fresh install of Suse 11.4. It worked great except that the network communication would cut in and out intermittently. I managed to solve the problem posting it here for other users and for future suse releases. I will give the hardware I am running, the symptoms and the fix:
Hardware
=======
Motherboard: Gigabyte GA-H67MA-UD2H-B3
Ethernet controller: Realtek RTL8111E
Default module: r8169 (run lsmod to see loaded modules)
[Code].....
1) First make sure that linux kernel source is installed in your system (yast software management)
2) ensure that gcc is installed (yast software management)
3) Download the latest linux driver for RTL8111E from the realtek website The one that I am running is the 8168 driver version 8.024.00
4) unzip the tarball (creates a directory called "r8168-x.xxx.xx")
5) As root run the autorun.sh from inside the newly created "r8168-x.xxx.xx" directory
View 9 Replies
View Related
Jul 6, 2010
I use ubuntu 10.10 and for some reason the sound doesn't work. tried everything reinstalling ALSA and alsa driver doesn't even work any help, it's a toshiba satellite L505-S6946
View 5 Replies
View Related
Jan 14, 2010
I have a few issues with my new install of Ubuntu. My screen resolution doesn't go above 800 x 600 and my sound card does not work. I believe these are driver issues.
[Code]....
View 9 Replies
View Related
Jan 31, 2009
I have a strange problem with my audio on Linux. Some months ago I bought a new laptop (an Asus M51Vseries (M/B version M51Vr)), and now I want to install Linux on it. However, there are some problems. When I first booted up my newly installed Linux distro, Debian Lenny (kernel 2.6.26-1-686), I had sound when I tried to play movies, mp3s, etc. However, after next boot, the sound had disappeared. Nothing came out of the speakers even though everything had worked before. Nothing had changed in the mixers as far as I can tell, either. So I googled a lot and came about pages telling me I should edit /etc/modprobe.d/alsa-base and passing on a model option. Unfortunately it didn't work. I then put off the project a while, and yesterday I tried installing Linux again. Magically, sound worked again, and after rebooting, it had gone. I am at my wit's end.
When I think about it, I find it strange that sound that HAD worked, should stop working, and then start working again by passing a model=... (I tried several) in alsa-base.According to alsamixer (and yes, all channels are at the highest volume level, NOT muted), the chip is a Realtek ALC663. The Alsa version is 1.0.16.I hope you are able to help me. I really want to get rid of Windows, but I won't accept not having sound.
View 3 Replies
View Related
Feb 16, 2010
Where can I get the Realtek ALC883 driver for Ubuntu?
View 1 Replies
View Related
Aug 28, 2010
How can i install Realtek HD Audio Driver??
I Downloaded The Driver From Realtek Website
http://img517.imageshack.us/i/20100827183305.png/
Then
http://img821.imageshack.us/i/98431356.png/
i dont know how to install this driver from this file
i want to use my Sound Card Features ( like Windows 7)
Ex.
http://smg.photobucket.com/albums/v1...ealtekHDMI.jpg
View 2 Replies
View Related
Apr 26, 2011
trying to get my little Encore USB wireless adapter to work on several flavors of Linux (Ubuntu 10,10, ElementOS, Xubuntu, and Puppy), I emailed tech support at Realtek. I asked where is the Linux driver for this product? I did this because there were no Linux drivers posted on their site and everyone here (and on Newegg) is jumping though hoops trying to get a working wireless connection with the Encore and similar dongles that use the RT8187b chipset. I didn't expect an answer, but felt better after my little vent. I get an email from Realtek with a driver. Realtek needs to promote Jerry -- a beacon of customer service in the age of the "get lost" school of customer relations. I have attached the driver below. Caveat: I have not yet compiled the driver, so I don't know much more about it than I've said already, although the archive appears to contain the source code.
View 3 Replies
View Related
Nov 26, 2010
I just installed Maverick, and everythings working great except sound. I only have 2 channels working front left and right, no middle, no rear, no bass. In sound preferences i can only choose between different stereo options.
View 5 Replies
View Related
Jul 25, 2010
I am using ubuntu 10.04lts on my compaq615 laptop, which has a realtek wireless card, with which I had a few issues to get it to work.
Here is what I had to do:
When I do this, it works beautifully, after setting my router to open I may add.
So, as I said it is probably the fastest wireless I have ever experienced, but my problem is this, everytime I switch my laptop on I have to re-install, starting at:
View 7 Replies
View Related
Oct 4, 2010
when I updated from 10.04 to 10.10 beta, I lost my wireless on my Gateway MX3410 laptop. In 10.04, the wireless Realtek RTL8185 card was auto-detected, worked with the default driver.
So I installed the linux driver version of Realtek RTL8185. Although the driver shows up in the "Additional Drivers" panel under "Administration", the computer is not recognising the driver.
Below is all the specs of the current situation.
Gateway MX3410 Computer
OS: Ubuntu maverick (development branch)
2.6.35-22-generic x86_64
lspci:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
lsusb:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
View 2 Replies
View Related
Mar 7, 2011
I printed off the Readme file from RealTec and went though the following procedure. If anyone spots a glaring error could you please advise and I will try and fix. I changed to superuse using : sudo su and entered my password. All good so far.I was already in the directory containing the downloaded RealTec driver. I downloaded RLT8192SE ver 0019 as this was the closest to my hardware version and the latest driver available.
I used the command : make
and then : make install
Both these commands ran ok. However when I rebooted and activated wireless using Fn F10 on the laptop I was still disconnected from WIFI.
I then used : iwconfig wlan0 up
but this resulted in an error (see below)
root@Ubuntu:/home/jon/LDD/Drivers/test# iwconfig wlan0 up
iwconfig: unknown command "up"
root@Ubuntu:/home/jon/LDD/Drivers/test# ifconfig wlan0 up
SIOCSIFFLAGS: Operation not permitted
View 1 Replies
View Related
May 17, 2011
my Ethernet card stopped responding a few days after installing Ralink Wireless Card Driver for Linux. I have tried installing the drivers from Realtek's site, but it fails. I also have tried reinstalling the network manager, and that still didn't help any. I have also tried looking online for any post or blog that could help, but that also turned up nothing. The Computer is a new 2010 / 2011 (bought it on new years eve) HP Pavilion desktop that came with windows preinstalled.
View 6 Replies
View Related
Jan 26, 2010
I recently installed ubuntu 9.10, today actually, and I can't seem to make the audio work. I read a lot of threads, but no luck with this..
View 7 Replies
View Related
Apr 12, 2011
Well I installed Ubuntu 10.10 64Bit along side Windows 7, and I've been unable to get any sounds working, apart from the log on sound. So I tried installing some drivers, and now there is no sound at all, and no sound devices show up in System-Preferences-Sound-hardware
I'm using the on board HD Audio (ALC 889A) and using the optical Audio out for 5.1 Surround sound.
I've tried just using the Stereo ( Green Jack ) out, and still nothing. The suggestions on the on the Ubuntu site, and the following post didn't seem to work either.
[url]
I Can't find a great deal of posts with the Realtek HD audio.
View 1 Replies
View Related
Jun 7, 2010
I've just installed Ubuntu 10.04 on my samsung n150. It has the 8192 device in it. Have installed ndiswrapper, however cannot get the drivers for it. How to fix/where to get the driver from so I can get my wireless card working again.
On lspci:
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) .....
I think the driver may be there, however I just can't 'enable' it. On my laptop there is a blue light saying that wifi is enabled however who knows.
View 3 Replies
View Related
Aug 9, 2010
I'm having trouble with my Samsung Netbook N220 and its Realtek 8192 wireless card and could use some help with diagnostics. I would like to use the netbook as a server and after a day or so the system stops responding. What I'd like to know:
- What do the "========>ieee80211_parse_info_param(): athros AP is exist" spam messages actually say? Does anyone else have this and stability problems?
- Why is the realtek driver package not working?
I'm running Ubuntu Netbook 10.04/Kernel 2.6.32-24-generic. Initially the card was unable to connect, so I installed the Realtek driver rtl8192se_linux_2.6.0017.0507.2010 which adds a kernel module r8192se_pci.ko. At first my system was hanging during bootup. I then restored /lib/modules/2.6.32-24-generic and now the card is connecting but the system is unstable. The 2.6.32-23-generic kernel, modules listed below, still has modules as installed by the realtek driver and is not working. Below the drivers supplied by ubuntu
./2.6.32-24-generic/kernel/ubuntu/rtl8192se/r8192se_pci.ko
./2.6.32-24-generic/kernel/drivers/staging/rtl8192su
./2.6.32-24-generic/kernel/drivers/staging/rtl8192su/r8192s_usb.ko
[code].....
View 9 Replies
View Related
May 30, 2011
Today I realized that my newly installed Natty does not recognize the Ethernet port, I used to have it when I was working on the Ubutnu 10.10. The following is the output (only the network related part) of lshw command:
Code:
-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[code]...
View 5 Replies
View Related
Jan 25, 2011
I have been having trouble with the install of Ubunto in general. First problem is that my realtek network drivers rtl8168 are giving me some problems. I have followed advice from other threads for disactivating the NIC and disconnecting the power for 10seconds. This works in that Ubunto can recognize the hardware (hardware active), but it says it is not in use. Furthermore, I try to define the IP address manually and it does not allow me to press apply. Therefore I cannot connect to the internet.
I though I would try a fresh install of the latest Ubuntu. I did not have the internet connected (due to drivers). After the partitioning section (I partitioned over Ubunto 9.10), on the screen where it says select Username, computer name etc. some files were loaded, and at the end it says �ready when you are�but I was not able to move forward. I don�t now why. Ultimately I reboot the computer Now I get this message upon booting (I am still booting from USB)
GRUB Loading
error: unknown filesystem
grub rescue
View 4 Replies
View Related
Jul 2, 2009
I just checked the Realtek website and they have a new Linux Driver for the RTL8185. The new driver is dated 6/26/2009. So it is quite recent. I would have thought it might have gotten into FC11.
I have 2 questions. Has anyone tried it? What would be the steps to install it?
View 1 Replies
View Related
May 18, 2011
I hope I'm posting in the right forum here, but I'm trying to install a realtek wireless driver and make goes okay, but when I get to make install it says permission denied when trying to create a file in a folder near the end of the process. Is there anyway to fix this? What can I do?
View 2 Replies
View Related
Jan 24, 2010
I'm running Ubuntu 9.10, but so far I've been unable to get sound to work. I know my sound card is Realtek, because I've had to install the HD Audio Codec Driver when I was on Windows. I downloaded the driver for Linux and it is currently sitting in my home folder. When I tried to Code:sudo ./installthe driver, it failed for the following reason:
Code:
WARNING!!! The mixer channels for the ALSA driver are muted by default!!!
**************************************************************************
[code]....
View 7 Replies
View Related
Mar 19, 2010
I was running Ubuntu 9.04 and just upgraded to 9.10 recently. I see many others are having problems with their sound. I too do not have sound. I did get sound running briefly with an Alsa update, but it was muffled. In trying many other fixes, I again have no sound and can not resolve it. I am thinking of burning a new cd and doing a fresh install and starting over.
My lap top is an MSI GT725 US model with an HD4850 mobility graphics card. I dual boot between Vista 32 bit and Ubuntu.
Has anyone else had any luck getting the Realtek ATI sound working in 9.10?
View 6 Replies
View Related
