Debian Configuration :: PCMCIA USB - Worked In Lenny, Not In Squeeze?
Apr 25, 2011
I had this PCMCIA USB 2.0 card that worked in Lenny when I put this laptop into my closet in late 2009. I brought it back out a few weeks ago and put a fresh install of Squeeze on it, and it does not recognize the card. dmesg says something about "ignoring the device" (sorry, I don't have the machine in front of me).
Laptop in question is a Toshiba Tecra 8000. The PCMCIA card... has no brand on it whatsoever. I thought I had the box somewhere, but I have been unable to find it.
The VirtualBox website have a 64 bit deb for installation available for AMD64 Lenny but not for Squeeze. Is it okay to install the Lenny package on Squeeze or would this cause a problem?
I just wanted to know if i download Debian Squeeze linux-source-2.6.32 from packages.debian.org and try and compile it in debian lenny using lenny's packages will the build succeed ?
Have my proxy running on Lenny and tried to upgrade to squeeze. Originally the system was installed on Etch and upgrading to Lenny was no problem. In the system i have two RAID1 volumes, md0 for / and md1 for /home. For upgrading i added the sources to my apt.conf and startet dist-upgrade. During the installation procedure, when installing udev I was advised to install the new kernel first and continue upgrade after booting the kernel. so I installed the kernel by "apt-get install linux-image-2.6-686. When generating initramfs there was a message, that there are no arrays defined in /etc/mdadm/mdadm.conf I took a look and there were none. mdadm seems to have been update before.
I then added the lines for RAID definition and added the data for UUID The UUID I got from the output of "mdadm --detail /dev/md0" What I don't understand: blkid gives the same UUIDs for the first partitions of the RAID and a different UUID for /dev/md0 and /dev/md1 than mdadm --detail The update of initramfs for kernel 2.6.32 then gives this result:
update-initramfs -u -k 2.6.32-3-686 update-initramfs: Generating /boot/initrd.img-2.6.32-3-686 W: Possible missing firmware /lib/firmware/e100/d102e_ucode.bin for module e100 W: Possible missing firmware /lib/firmware/e100/d101s_ucode.bin for module e100
I'm in need of a bit of assistance from you Debian users. I have two servers that I thought were identical installations, both running Debian Lenny. Tonight I started the upgrade to Squeeze on both servers and one of them went smooth. The other one started out good but fails on the postconfiguration of openssh-server. I'm getting the following message:
It looks like there's an error in one of the files in openssh-server that prohibits it from installing correctly. However on the other server it all went well.
This is my first ever question. I'm a new-bee when it comes to configuring lenny at admin level, however with the help from the forum I was able to get my SONY Vaio VGN cs 190 configured successfully. I've gnome-core installed and here is my concern. I've Windows running on the same machine. I've a realtek sound card with Dolby SoundRoom. It works beautifully in Windows, as I've Dolby Control Center application to control the amount of bass I need. I also have a logitech Z-2300 2.1 Speaker system. Even though, it's a 2.1, it produces amazing sound. If I disable Dolby using Dolby Control Center, I fail to listen wonderful sounds whether I'm playing music or movies in Windows.
I'm not quite pleased with my experience of movies or music with Lenny as there is no Dolby Control Center application to control it. I've tried several suggestions, but none was fruitful. I've even tried Wine, but I'm not happy with it. If I can get this Dolby Control Center to work, I can completely take off Windows from my Laptop, which is my ideal goal.
still stalling after all those months, everything is explained here
[URL]
the card works fine in xubuntu jaunty, doesn't in xubuntu karmic or ubuntu karmic. i (my wife) wants to use ubutun karmic, but we still can't get this ATMEL PCMCIA wirelesscard to work on ubuntu karmic like it does on jaunty... and we have the windows INF drivers
I just bought for my T60 a pcmcia cardreader (16 in1) from HT-Link (HT-190). In Windows 7 no problem, but squeeze does not evenzethe card.It's not shown in lsusb or lspci.lspcmcia showsSocket 0 Bridge: [yenta_cardbus] (bus ID: 0000:15:00.0)
Now that the stable version of Squeeze is available, the newbie that I am is asking himself this almost existential question: should I get Squeeze or stick to Lenny?Some arguments in favors of Lenny that are coming into his mind are that there is more material, tutorials, in brief, more resources to find as to learn and solve problems.
But is this true and if yes, is it a reason?What about security?There is also this widespread saying that tells to always get the last release for performance and security reasons.Being in this position where I obviously don't have a lot of knowledge and experience to judge myself with all the elements, assessing thoroughly all the differents factors, I would have like to listen you opinion(s) on it.
I am currently running Debian Lenny on one of my external HDDs and Debian Squeeze on the other one. I found a package I like in lenny but it seems it has not been added to squeeze (yet). The package is ksirc and i like it because it looks and feels like mIRC that I used in windows. My question is can I install the lenny version on squeeze with out it having an adverse effect? My other question is what do I put into the /etc/apt/sources.list to do this? i now see that ksirc is also available in a sid (unstable) version. Is it safe to install this one to my squeeze distro? and again what do I need to add to my sources.list to do this?
Or could I just download the deb package and install it using dpkg? New to this and just looking for the best way to get a favorite software package.
I run into a problem when trying to update from lenny to squeeze. Seems that util-linux fails to install due to some error and that this causes xorg as well as udev to fail. If this is the case then it might be a bug in the post-installation script for util-linux..Am I on the right track or is it completely wrong?
I am running a lenny server. So I don't have physical access.How can I upgrade to Squeeze without everything breaking? Also, I want to use "apt-get", not "aptitude".
I have a Debian Lenny LAN Gateway machine running shorewall, squid and a source install of ossec in the opt dir. The machine is an Intel Atom based asus hummingbird with no gui. It works well and has been very stable so far. However, i am considering upgrading to Squeeze. Is it feasible to attempt to upgrade this machine, or am i realistically looking at a reinstall and reconfigure with Debian Squeeze over a long weeked?
for reasons i dont know but are waiting for my hosting support to tell me they have choosen lilo over grub.so to be sure that my system reboots after the upgrade i installed grub2 first from the repos and rebootet - system wasnt coming up anymore, sda1/2/3 have at least 20 more mounts before fsck will check them.
im using deb squeeze after upgrading from lenny since upgrading, my pc hangs when trying to save any file with any program like gedit and firefox it hangs for about 2 minutes with a blank save as screen before finally showing the folders screen.
I have Ati HD 4890 card and I need to get it working with game and 3d-software. Which Debian should I choose to get those ati proprietary drivers to work as stable and easily? Can I get them working all the time with Squeeze/Unstable or should I use Lenny for that? If they work with all of them, I'd like to take Squeeze (or is unstable as stable? name doesn't say that at least). So which one I should choose? Can a newbie get fglrx to work on Squeeze?
I need libnet0 on a squeeze installation, so I can compile nemesis, which unfortunately has not been an active project. It depends on libnet0, which is not in the squeeze repository.I can compile nemesis, but will it ok to do this the same way with the libnet0 library? Or should I manipulate the /etc/sources.list to be able to install it from the lenny repositories? (this doesn't sound right...Better get the sources? And what happens when I compile it? Can I safely have libnet0 and libnet1 on the same installation?
Now when new stable debian is squeeze I was wondering how do I apply updates to my lenny distro?I just want to apply all updates available for lenny, but DO NOT WANT to upgrade my lenny to squeeze.
when I tried to upgrade my computer from Lenny to Squeeze and it downloaded everything but it's stuck at installing udev which it said it couldn't do on the 2.6.26 kernel. I then did update-grub and Squeeze's 2.6.32 kernel was seen (on grub). I have grub-legacy chainloading (if I'm not mistaken) but I don't have grub2 installed. When I try to boot through the 2.6.32 kernel so that I can complete the upgrade (that is to install udev and have everything working fine), instead of reaching the OS, it says something along the lines of "kernel panick not syncing vfs" and something about "root(hd1,0)".
I have been asked to install Windows 7 on a computer that groans to even run Windows xp properly. As I know, this is like asking for the impossible, I am posting here to have some opinions about the use of Wine in Debian. In particular, I would like to know whether wine makes Debian less secure and more vulnerable to viral, malware, adware, etc infections.
I just got an HP mini 210 with Atom processor. whether to install Lenny or Squeeze. I would like to know which will be easier to install and get it working.
I'm currently using Debian Lenny 5.0.7 and I tryed to upgrade to Squeeze. I followed the instructions from Debian's Guide:
1. I changed my repositories to squeeze in sources.list 2. # aptitude update 3. # aptitude install apt aptitude dpkg 4. # aptitude safe-upgrade
After this last command, the computer kept working for about 7 hours, it consumed 2 gb RAM and 1 gb swap, and in the end aborted with the following message:
I searched around and I found out that this error is somehow related to C/C++ package compilation, but I found nothing specific related to Debian's upgrade.
I am thinking of upgrading from my production Lenny to Squeeze.Is it better to upgrade from Lenny directly, or reformat my hard drive and install from fresh (I do have backup of my /home)?
I have a question about dist-upgrading. I'm using 5.0 lenny with KDE 3.5 and I want to upgrade, but I don't want to change my KDE to that new version of disaster. Will the apt-get dist-upgrade update my kde?
A week or so ago, I downloaded the current stable and burned it. (lenny)And on the 5th I started installing and finished on the 6th.I then see squeeze was released LOL.I have started using the system and would rather not start over from scratch.(but I will if it is the *best* way to go)I am coming from Ubuntu but I do know my way around the system...
All the threads I see start off by editing the sources list to change lenny to squeezeIs there an easier way?I've looked for a HOWTO but did not see one.I am not looking to stop any part of the system from upgrading.In ubuntu I have gone from distro to distro, but that option is not offered.I checked "Software Sources" -> Updates I do not see the Ubuntu option of allowing distro updates ot be offered.
I recently reinstalled Debian. Previously I had sound working in schroot without a problem. I simply added the user to the audio group ran alsaconf and it worked.Alsaconf has been removed from squeeze so I tried from Lenny. Alsaconf installs but does not find the sound card in the schroot. In deed it seems to be looking for amd64 modules (those of the host system).
SOLVED:The driver hid-cypress/USB_DEVICE_ID_CYPRESS_BARCODE_3 is included in the latest kernel.org, but not the default x86 Debian Squeeze 2.6.32-5. Downloading, building and booting a custom kernel solved the problem. I upgraded from Debian Lenny (2.6.26-2) to Debian Squeeze (2.6.32-5) and my barcode scanner stopped working. Based on the details below, I believe the problem is that usbkbd.ko moved.
Under Debian Lenny, I had a similar problem until I set the system to load "usbkbd.ko" at boot. This caused the scanner to show up in /dev/input/by-id/usb-Guest_Barcode_Reader-event-kbd which enabled my application to find and use the scanner with no problems.
Under Debian Squeeze, I'm seeing scanner via lsusb, but not in /dev/input/by-id. Below are the dmesg logs. It appears that Lenny "input" is finding the scanner, but Squeeze is not (presumably because I don't have the right kernel module loaded).
Lenny dmesg: usb 2-1: new low speed USB device using uhci_hcd and address 4 usb 2-1: configuration #1 chosen from 1 choice input: Guest Barcode Reader as /class/input/input7 usb 2-1: New USB device found, idVendor=04b4, idProduct=bca1
