In an effort to mount an NTFS partition, I'm following the tutorial here: [URL]
Since I didn't have rpmforge installed, I followed the directions here: [URL]
I'm fairly confident I followed both of these tutorials correctly. However, behold:
$ sudo /sbin/modprobe fuse
FATAL: Error inserting fuse (/lib/modules/2.6.18-128.7.1.el5/extra/fuse.ko): Invalid module format
$ uname -r
2.6.18-128.7.1.el5
I followed the steps in the wiki shown here: [URL] But when I try to mount an ntfs drive I get an error insisting the fuse module isn't installed. I try to modprobe fuse and it says there is no fuse module.
Yum confirms that :
Package fuse-2.7.4-1.el5.rf.i386 already installed and latest version
Package fuse-ntfs-3g-2009.4.4-2.el5.rf.i386 already installed and latest version
Package dkms-2.0.20.4-1.el5.rf.noarch already installed and latest version
Package dkms-fuse-2.7.4-1.nodist.rf.noarch already installed and latest version
Package kernel-xen-devel-2.6.18-128.1.10.el5.i686 already installed and latest version
I installed FUSE using fuse-2.7.4.tar.gz; but now, when I type 'modprobe fuse' in a terminal, it gives me: FATAL: Module fuse not found.
View 4 Replies View RelatedI have installed three flavors of linux on vmware
1.rhel5
2.centos 5.5
3.fedora 14
and also install centos 5.5 on a separate hard disk (not on vwware).
I want to mount my pen drive on linux which is ntfs. I have tried a lot on rhel5 only. Please tell whether it is possible mount ntfs on any distributions I have mentioned above? I have already installed fuse, fuse-devel, fuse libs, ntfs-3g, ntfs-3g libs on rhel5. But I still got error:
"fatal : module fuse not found"
"ntfs unknown file system"
I need to mount NTFS drive on RHEL 5.1. I tried NTFS-3g & FUSE as well, but still getting
FATAL: Module fuse not found error.
I've been trying to mount ftp on a directory, using curlftpfs, but when I run:
Code:
curlftpfs user:pass@server /mnt/mount-point
I get the error:
Code:
fuse: device not found, try 'modprobe fuse' first
And when I run it, I get:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
FATAL: Could not load /lib/modules/2.6.32-dyomin.1/modules.dep: No such file or directory
Code:
mknod /dev/fuse c 10 229
After that when I run the mount command ) get the error:
Code:
fuse: failed to open /dev/fuse: Operation not permitted
I have OpenSUSE 11.2 KDE edition. I download TrueCrypt 6.3a from TrueCrypt - Free Open-Source On-The-Fly Disk Encryption Software for Windows 7/Vista/XP, Mac OS X and Linux - Downloads (openSUSE - x64 (64bit) .rpm). The first problem that I encountered was dependencies; first I installed fuse using YaST then I installed the rpm file. but when I try open a volume, TrueCrypt gave me Code: fuse: device not found, try 'modprobe fuse' first. So I issue in Terminal that command but I see this error:
Code: FATAL: Could not load /lib/modules/2.6.31.5-0.1-desktop/modules.dep: No such file or directory I googled and search the forum but didn't found anything. So I thinkg only I have this problem.
Recently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs
Output information may be incomplete.
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N
First sec data area: 43:41:33 (LBA 196608) (402653184
[code]....
After yum installed me fuse-ntfs-3g-2009.11.14-1.el5.rf.i386 I noticed that on one NTFS partition directories created by a normal user were writable only by root, although the user's umask was correct (0022; actually the files had root as group owner).I have a second partition mounted with exactly the same options in /etc/fstab where this problem did not occur.
/dev/hdb1 /win/d ntfs-3g uid=500,gid=500,umask=0007,nls=utf8 0 0
/dev/hda7 /win/f ntfs-3g uid=500,gid=500,umask=0007,nls=utf8 0 0
I ran a "yum downgrade fuse-ntfs-3g" and the problem was gone.Would be good to get a new version of the driver into the repos.
if i wanted to just download and install a module, how does centos have it where i don't have download the source and recompile the whole kernel withthe module enabled? i read about install kernel-devel but nothing much more on using it. for instance, if i wanted to download ext4 module and have the kernel use it?
View 1 Replies View RelatedI'm trying to install a PECL module imagick into XAMPP, but it's not showing up on phpinfo();
The steps I've taken so far
1. Compiled Image Magick from source
2. Compiled imagick PECL module from source
3. Copied the .so files magicwand.so and imagick.so from /usr/lib/php/modules/ to /opt/lampp/lib/php/extensions/no-debug-non-zts-20060613
4. added
extension=imagick.so
extension=magickwand.so
I'm trying to install the ip_tables module on a xen vps without success.This is what I've done and the error message I'm receiving:
[peter@sql0 ~]$ uname -a
Linux sql0 2.6.18-128.4.1.el5xen #1 SMP Tue Aug 4 20:51:12 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
i want to mount ntsf partition in rhel5 As per instructions in the net i downloaded fuse rpmsbut i am not able to instlal kdml?rpm -ivh fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686.rpmgettting the following error:
Missing Dependency: /boot/vmlinuz-2.6.18-194.11.3.el5 is needed by package fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686 (/fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686)
[code]....
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
I have some problem installing ASM Software (LANDesk) a BMC module on server ACER ALTOS G330MK2 with centos 5.3 totally updated. Could someone help me to understand wich is the problem ?
INFO:Installation is being performed on the RedHat Linux distribution.
DEBUG:distro:RedHat
DEBUG:Import of rpm-python code successful
INFO:bash is installed with version 3.2
[Code]...
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
I would like to enable XML-RPC module on my dedicated server with CentOs 2.2-3.2.el5 hosted on 1and1 server. How do I enable this module? What are the procedures?
View 1 Replies View RelatedSo I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
I see that mod_proxy_html is not part of the standard repo - what's the best of installing/getting that module on CentOS?
View 5 Replies View RelatedI have installed tvtime in CentOS 5.5. I'm using a phillips tvtuner card saa7134. But when I modprobe saa7134, it says Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]# modprobe saa7134
FATAL: Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]#lspci | grep -i 'saa'
02:02.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
I have installed CENTOS 5.3 on my machine and am running the new version of Subversion which comes bundled with Apache. I noticed in the httpd.conf file there is no module for PHP which is a problem. How do I install the PHP module for APACHE in Centos 5.3?
View 3 Replies View RelatedI want to add the imap module into my php
View 1 Replies View RelatedI am having this problem everytime I execute the yum command: There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named cElementTree
Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is:
2.4.3 (#1, Sep 3 2009, 15:37:12)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-46)]
I installed openxenmanager without a problem. but when I tried to start it I got: ImportError: No module named gtkvnc
the start script is in python, and I am using python2.5 to run it. I already installed
gtk-gtk-vnc.i386 0.3.8-3.el5 installed
gtk-vnc.x86_64 0.3.8-3.el5 installed
gtk-vnc-python.x86_64 0.3.8-3.el5 installed
Note: when I use python2.4 I got another error and it skip the previous one, the error is: ImportError: No module named hashlib
and when I comment it the application is running but with errors.
I have CentOS 5.5 (Final Release) installed on my netbook. I am trying to configure vmware on this machine. When I run vmware-config.pl it goes smooth until it tries to build vmmon module. It gives me following error when it tries to build vmmon module:
Code:
Extracting the sources of the vmmon module.
Building the vmmon module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config10/vmmon-only'
[code]....
I installed svn. it works but apache can't load modules
i installed svn using yum :
#yum install subversion mod_dav_svn
Started getting this middle last year and was hoping it'd just go away or fix itself or something. Alas, no such luck.
$ meld
No module named pygtk
Meld requires pygtk2.6.0 or higher.
$
I thought the system was supposed to get through the early stages of booting without /usr so I moved it to a filesystem on my zfs-fuse pool, and created a symlink from /usr to /media/zfs/usr
On reboot it would not boot. Hitting esc to see the messages showed network-manager, avahi-daemon, and squid all failing to start (the first two before the ZFS mount success message came up, the other one after). The system was doing nothing.
Somehow, however, the system was still able to boot into the root shell of recovery mode, which I used to out /usr back on the main ext4 partition and now it's booting fine.
Should this be something I'm able to do? Are there specific parts of /usr I need to leave? Should I try to figure out how to make ZFS mounts happen even sooner than whatever the zfs-fuse package defaults to?
I am interested in working with zfs fs's and I am looking for tutorials on the subject, I am working with the Centos distro, can you send some links my way.
View 2 Replies View RelatedAny attempt to run yum produces the following error:
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.main(sys.argv[1:])
AttributeError: 'module' object has no attribute 'main'
It doesn't matter what command line arguments I use I get the same.I've spent a day or so searching on Google but not had any luck in identifying what is causing this problem.