I have some problem installing ASM Software (LANDesk) a BMC module on server ACER ALTOS G330MK2 with centos 5.3 totally updated. Could someone help me to understand wich is the problem ?
INFO:Installation is being performed on the RedHat Linux distribution.
DEBUG:distro:RedHat
DEBUG:Import of rpm-python code successful
INFO:bash is installed with version 3.2
[Code]...
I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
I've installed a new fresh Centos 5.5 ..and after a lot of work..something starts to work (X now works with the new ATI HD5145 using ATI drivers) but i've a serious problemThe ethernet controller JMC250 JMicron PCI EXPR. doesent work at all so my notebook is out of the world !!!Here is some infos:rpm -q centos-release
centos-release-5-5.el5.centos
rpm -qa kernel* | sort
kernel-devel-2.6.18-194.el5
[code]....
I am trying to install Centos 5.6 on a motherboard with a built in Marvel 88SE61xx drive controller.NO drive arrays are configured using the Marvel BIOS configuration utility.During the install CENTOS displays loading MARVEL_PATA driver and it waits and waits and waits.Looking on one of the system message screens I get the following types of messages:qc timeoutfailed to identifyI/O errorLink is slow to respondSRST failed errno=16ata4: reset failed - giving upAny ideas as to how to get CENTOS to recognize the drives connected to the motherboard Marvell controller on a NON-RAID configuration?
View 1 Replies View RelatedI have had a Supermicro X7DCL-3 motherboard based machine, running CentOS 5.2 x86_64, recently upgraded to 5.3.Strangely enough, although I must have installed the 5.2 using DVD disk, the running system does not show the DVD drive. The machine was not used very much so I noticed that only today, after the update. There is no trace of it in 'dmesg', thera are no /dev/cd* and/or /dev/dvd* devices. The IDE controller is IT8213 (as shown by 'lspci'). In 5.2 kernel (2.6.18-92.el5-x86_64) lspci says "unknown device". I have checked the /usr/src/kernels/*/.config files and both kernels (5.2 and 2.6.18-128.el5-x86_64 of 5.3) seam to have the support for that controller added into the kernel:CONFIG_BLK_DEV_IT821X=yAny idea why it is not working? The Supermicro has apparently noticed this also as their OS compatibility chart lists the IDE interface for that motherboard as supported up to RHEL 5.1 but not for 5.2.
View 2 Replies View RelatedI would like to enable XML-RPC module on my dedicated server with CentOs 2.2-3.2.el5 hosted on 1and1 server. How do I enable this module? What are the procedures?
View 1 Replies View RelatedI'm having trouble to get connected to the internet on CentOS 5.2 . I have an NVIDIA nForce Networking Controller onboard. And I've been trying to find a driver for this, but I was unsuccesful so far. And if I have a driver, how do I install it? Could anyone please help me to get this working. I'm just a beginner with CentOS and Linux, so I don't have much experience yet. Oh, and I forget to say that Centos 5.2 on VMware does have internet, but I stopped using vmware because it became very laggy on my Vista OS, so I started to use dualboot.
View 19 Replies View RelatedI see that mod_proxy_html is not part of the standard repo - what's the best of installing/getting that module on CentOS?
View 5 Replies View RelatedI want to add a new IDE controller, to the one I already have on board (I have only one). I disable the on board controller in order to boot the same disk using the new IDE controller.
The problem is that when I get to Grub it does not know where to boot from.
The system should boot from hd0,0 but it can't find it. I tried hd1, hd2 and hd3. None of them worked.
Do I need to edit Grub before installing the extra IDE controller?
How to configure centos 5.4 as a domain controller?
View 2 Replies View RelatedI have just installed a NEC 3.0 PCIe board in my CentOs 5 box, but the card is not recognised, and no drivers seem to be loaded for it. lspci says: USB Controller: NEC Corporation Unknown device 0194 (rev 03) The vendor says the board is supported on Linux kernels 2.6.16 and later. uname says my kernel is 2.6.18-194.17.1.el5
How do I get this device to be recognised, and drivers loaded for it?
I'm working on a new server and it has an Nvidia SATA array controller with 2 250Gb SATA drives configured in a hardware array. When the first screen comes up I'm entering the option Linux DD for it to prompt me for the drivers but nothing ever happens. The screen says that it's loading a SATA driver for about 15 minutes and then the screen clears and has a plus sign cursor on a black screen. What am I doing wrong? The only driver that came with the HP server are for Redhat 4 and 5 and SUSE, will any of those actually work?
View 7 Replies View RelatedI have an old IBM Xseries 300 server that i can use. So, i am trying to install Centos 5.3, but during the installation , no disk can be found. I have 2 disks (1+1 in mirror) connected to an IBM serveraid PCI card.
I installed Debian Lenny, and it recognize the card (so the disks) immediatly.
~# lspci | grep RAID
00:09.0 RAID bus controller: IBM ServeRAID Controller
~# dmesg | grep scsi -i
[ 1.527963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.092981] SCSI subsystem initialized
[Code]....
I have setup Ubuntu servers as LAMP machines but that's pretty much it.
I need to work on an existing CentOS server that I will see for the first time tomorrow. I am told that, as of right now, it is "just serving the internet." The goal is to set it up to be a primary domain controller by which I mean:
1) A user should be able to login to the server from any of the workstations and then see their server stored documents
2) The clients will be a mixed bag of Linux, Windows and Mac machines
I could use a push in the right direction as to what I need to do to get this all setup. I know how to setup users and home folders (I use webmin typically and I understand that there is a version for CentOS) but clearly there is more that I need to do. I am really curious as to how I would map the necessary drives on the client machines upon login and have the users have automatic access to their data regardless of the client machine they log in to.
I have been trying for a few days to install CentOS 5.4 on an IBM x306 and I cannot get it to properly handle the Adaptec Embedded SATA HostRAID Controller. I have been working with Linux for a few years, but this is new territory for me. I typically use Debian-based distros, but I did some research on the IBM site and found out that RHEL is a supported OS for this machine. So, I decided to give Cent a try. I have some experience with Fedora, so it's not totally foreign to me.
Anyway, I'm a bit confused. Using the IBM RAID utility, I set up a mirrored pair of 1GB SATA HDDs. When I run the Cent installer, it sees the pair as a single array. I am able to partition the array and complete the install, but when I boot into the OS, it sees the drives as 2 separate devices, sda and sdb. I can pull either one of the drives and boot with a single disk, but it doesn't seem to behave as a mirrored pair. If I make changes on sda, they are not replicated to sdb. Also, I can't use the cli or GParted to format the existing space on the array. I get an error either way. I believe this is because Cent doesn't have a driver for the RAID controller, but I don't see why it would work in the installer, but not the installed OS.
My next approach was to start over and attempt to run "linux dd" at the start of the installation. I tried to find the driver for the controller on the IBM site so I could load it when prompted, but couldn't find a newer version than RHEL 4 Update 3 (I'm assuming this would coordinate with CentOS 4.3). I tried it anyway, but when I select the floppy during the setup, it tells me it's not for this version of CentOS. I read several times that there are .img files that might help me in the 'Images' directory of disk one, but I only see diskboot.img, minstg2.img, and stage2.img. I don't think any of these are what I'm looking for. I thought there was supposed to be a drvblock.img or driverdisk.img.
Does centos 5.4 support this?
product code: E10G41AT2
[url]
Running CentOS 5
System see the device with an lspci, yet will not load
Vendor:Device ID is 14e4:1691
Broadcom BCM57788 on board ethernet controller
Cannot find driver or anyone that seems to support it. Am I missing something?
This is in a Dell computer.
i am looking to buy a new sata controller to add more disk space (ever not enougth) to my home server. My os is a CentOS 5.2 X86_64 with the xen kernel. I want a controller supported by the kernell, plug and store.I found two boards looking interesting with a cheap price:- Dawicontrol DC-4320 with a SiliconImage Sil3124-2.- Promise FastTrak TX2300.The DC-4320 is better because has 4 sata ports Vs 2 ports for the TX2300, but this is not a big problem for me because i only can add two more disk on my box.I, am planing to buy a 1,5 Tb seagate disk (ST31500341AS), dont know if it may be a problem with the size.
View 6 Replies View RelatedOn an Asus P5Q motherboard, CentOS 5.3 x64. (Separate thread as the other one has turned into just a discussion on my lm_sensors issue). The motherboard's primary SATA controller is the Intel P45 chipset. 6 ports, set to AHCI in BIOS, and all works a charm. Attached are 6 x SATA drives (2 x OS, 3 x data RAID5, 1 x backup). There is also a Marvell chip that provides PATA and also an underlying SATA chip (2 ports) that can do what Asus call Drive Xpert (stripe or mirror RAID) or be set to just standard SATA ports.
It's a SIL5723 behind what CentOS sees as "03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)". Physically the Marvell has only a single optical drive attached to its PATA interface. CentOS has loaded marvell_pata (I assume for the PATA side of it) but I have no /dev/cdrom or /dev/dvd so no optical drive CentOS is trying to use 'ahci' for the Marvell's SATA ports. Dmesg tells me that when it 'sees' them as it boots:
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 16
ata8: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 16
ata9: DUMMY
It attempts to read SATA drives attached to it, but it just errors trying to access them on boot (e.g. "ata7: failed to recover some devices, retrying in 5 secs" etc). I need the extra SATA ports, and I could really do with having a usable CDROM drive. I found a driver for the Marvell 88SE6121 from Asus. But the latest driver in that is for what it calls "RHEL 50.2" and the script fails with a "Generic Protection Error". That driver looks for kernel "2.6.18-92.el5" in its base_ver variable in the script. Changing the base ver to -128 doesn't help. I have uploaded the driver for if [URL]. Is that modifiable to work on 5.3 / soon to be 5.4?
Session management with gnome-session-properties and GDM appears to be broken in CentOS 5.3 and 5.2. I can't comment on earlier versions.Activating "Automatically save changes to session" does work--for example, on the next login, the terminals that were open at the last logout are reopened.
But if "Automatically save changes to session" is not selected, according to help,"when you end your session the Logout Confirmation dialog displays a Save current setup option."This does not happen. No "Save current setup" is offered, regardless of whether or not "Ask on logout" is selected.
Also according to help, if one has added sessions with gnome-session-properties, then
when one logs in "on GDM, you choose a session. When you choose a session, you can
select which of the multiple sessions to use."This does not happen. No matter how many sessions one may have added with gnome-session-properties, none of them appears in the list of sessions that GDM presents.
So it appears that only a small fraction of session management functionality works in
CentOS 5.3 and 5.2.
I have to set up a box which can manage all the logins in our company and has the feature to manage every possible permission with as much comfort as possible. We are using Linux and AIX therefore my Boss is willing to switch from our Windows DC to a Linux DC. And here lies the problem, I don't really know what is needed to set the Box up to manage the Unix, Samba and LDAP accounts with one tool maybe?
I would like to know which Software exactly is needed and how to manage to get the thing to work together with a security aspect. I configured a Samba DC with LDAP, Kerberos and TLS but it looks like I overdid it because Kerberos is not able to manage the things we need in a manner that the other Admins in my Company would get things done in a short time.
Therefore I would like to get listed all the Software needed and maybe some How Tos how to get thing working, because I am losing my nerves on this matter.
In the last 3 weeks I have set up several test boxes but every time something doesn't work. My biggest Problem is to get Samba and LDAP to work together with TLS or another security scenario.
I am trying to install Centos onto a Poweredge 2650, with Dell Poweredge Expandable Raid Controller. I have 5 SCSI disks installed, and have created and initialised 2 logical volumes via the SCSI controller setup utility (Ctrl M after boot). After reboot the system reports two logical volumes present.
The Centos installer cannot find any disks when it gets to the disk partitioning/setup step. It reports no disks present. Do I need a specific driver for this controller?
Is it possible that CentOS 5.5 does currently not support Oxford's OXPCIe952-F serial controller chip? We've added one of those PCIe x1 cards to one of our servers since we need additional serial interfaces but it doesn't seem to work. Instead of three serial ports (the server comes with one already, the controller adds two more) we still only have ttyS0:
Quote:
root/linux2$ zgrep ttyS /var/log/*
/var/log/dmesg:serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
/var/log/dmesg:00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[code]....
I am a newbie who's having trouble installing drivers for Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller.
I already have the drivers from my motherboard vendor, its just that i cant get them to run on my machine. I am running CentOS 5.5.....On the Sytem>Administration>Hardware (Device Manager) I can see the device listed. I am uploading the files for anyone who needs them. I know i need to run an rpmbuild, but i get errors when i try it..... also, i've tried to run atl1.rpm from ElRepo with no luck, i get an error saying Cannot find a valid baseurl for repo:
I forced my workplace to forgo windows and opt for linux for web and mail server. I'm setting up Centos 5.4 on it and I ran into a problem. The server machine is a HP Proliant DL120 G5 (quad core processor, 4GB Ram, two SATA drives, 150GB each attached to the hardware RAID Controller on board). RAID is enabled in the BIOS.I pop in the Centos disk and go through the installation process.
When I get to the stage where I partition my hard drive,it is showing one hard drive, not as traditional sda.but as mapper/ddf1_4035305a86a354a45.I looked around and figured that I need to give Centos the raid drivers. I downloaded it from:
[URL]
I follow the instructions and download the aarahci-1.4.17015-1.rhel5.i686.dd.gz file and unzipped it using gunzip. Then on another nix system, i do this:
dd if=aarahci-1.4.17015-1.rhel5.i686.dd of=/dev/sdb bs=1440k Note that I am using a usb floppy drive, hence the sdb. After that, during centos setup, i type: linux updates dd
It asks me where the driver is located. I tell it and the installation continues in the graphical mode. But I still get mapper/ddf1_4035305a86.a354a45 as my drive. I tried to continue to install centos on it. It was successfull but when i do a "df -h" it gives me /dev/mapper/ddf1_4035305a86......a354a45p1 as /boot
/dev/mapper/ddf1_4035305a86......a354a45p2 as /
/dev/mapper/ddf1_4035305a86......a354a45p3 as /var
/dev/mapper/ddf1_4035305a86......a354a45p4 as /external
/dev/mapper/ddf1_4035305a86......a354a45p5 as /swap
/dev/mapper/ddf1_4035305a86......a354a45p6 as /home
Well i know why it's giving these, because i set it up that way, but i was hoping it would somehow change to the normal /dev/sda, /dev/sdb. That means that the driver i provided did not work. I have another IBM server (5U) with raid scsi drive and it shows the usual /dev/sda. It also has hardware raid. So i know that there is something wrong with the /dev/mapper/ddf1_4035305a86......a354a45p1 format.
First, is there any way that I can put the aarahci-1.4.17015-1.rhel5.i686.dd (floppy image) on a CD?. I really need to set this up with raid. I know i could simply disable raid in bios and then i would get two normal hard drives sda and sdb. But it has to be a raid setup. Any way to slipstream the driver into the centos dvd? The hp link i provided above, under installation instructions, there are some instructions titled "Important". But I couldn't get it to work.
I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
Filter access server through the net only to authenticated users from domain controller (Win2k). Server (Centos)(Firewall with 2 nic), which makes access to the net, with only 196MB RAM (PIII500Mhz), so I do not want a solution based on proxy or what resources it uses large I want a solution with a script that runs at login on windows this check series HDD and to communicate with Linux server that's open accessor another simple solutionNow just use only MAC filtering on
View 1 Replies View Relatedfollowing situation and configuring authentication for Windows users on my CentOS clients please:IHAC WIN2003 R2 Domaincontroller with ALL my users and groups maintained there. For Usermapping (SID to UID/GID) I want to use IMU which is included with WIN2003 R2 srv and extends my Active Directory schema for UID, GID, NIS Domain etc. I want now authenticate my Windows users on my CentOS clients via their "domainnameusername" and passwords on the CentOS clients.
I also have a NAS server which has usermapping integrated and resolves the Windows SID's to the UID/GID's configured within the IMU schema extensions. Now I have no idea to setup my CentOS clients to use winbind, PAM and LDAP (IMU supports LDAP queries for UID/GID resolving) WITHOUT needing any Samaba Server or functionality.
* Do I need to configure the smb.conf file because my usermapping is done on the NAS Server and I want to resolve my Windows Users/Groups UID/GID's from IMU via LDAP?
* Do I (just) need to Join the AD (2003 native) or even using Kerberos with generating ktpass.exe keytab files (what is needed/recommended and what is the difference?) Can I authenticate the users without using Kerberos?
For e.g. my username is "domainuser_a" and within the IMU the UID is set to "12345", I don't want Samba/winbind to do usermapping again based on the configured values in the smb.conf file. Some hints would be really nice for me to understand how exactly it works and what is needed...
I have installed tvtime in CentOS 5.5. I'm using a phillips tvtuner card saa7134. But when I modprobe saa7134, it says Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]# modprobe saa7134
FATAL: Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]#lspci | grep -i 'saa'
02:02.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
I have installed CENTOS 5.3 on my machine and am running the new version of Subversion which comes bundled with Apache. I noticed in the httpd.conf file there is no module for PHP which is a problem. How do I install the PHP module for APACHE in Centos 5.3?
View 3 Replies View Related
