I have driver DVD for ASUS motherboard. This DVD has drivers (motherboard and audio) for Linux, how do I install these packages.
When I tried installing these with package installer, it says cannot install the packge.
I just assembled a new computer with Intel Core I3 processor and Asus P8H67 motherboard and 4 MB of memory. It has a 2TB Hitachi Deskstar Hard Drive and Asus DVD. I am trying to load Ubuntu 10.10 directly (without first loading Windows) without success.
I have tried 4 separate downloads of Ubuntu - 64 bit, 32 bit with Desktop and Alternative. I have changed a variety of parameters and various tricks suggested on other threads. The Desktop (32 and 64) versions get me to Busybox shell with message (Initramfs) Unable to find a medium using live file system. The Alternative version hangs with the messages:
RAMDISK: Couldn't find valid RAM image startgin at 0;
No filesystem could mount root, tried ext3, ext2, ext4, fuseblk;
Kernal panic - not syncing VHS;
Unable to mount root fs on unkown block(1,0).
For parameters I think have tried them all (but not in all combinations). I tried exiting twice from BusyBox as suggested on forums but that just hangs the system. I also turn off the quiet and splash to try and see what is going on....but it is too complex and goes to fast for me to follow.
A final suggestion was that the P8H67 is too new for Ubuntu 10.10 and to try the new version 11 coming out...I am new to Linux and reluctant to try a Beta
no sound with motherboard Asus M4A78T-E for fedora 13
View 7 Replies View Relatedconfiguring my ASUS USB-N13 Wireless-N Adapter I was able to get the drivers installed as per the instructions I found in the forum but I'm not sure how to get the ASUS USB-N13 Wireless-N Adapter to be recognized by the drivers and how to configure it to connect to the Internet I tried following the instructions it came with but I did not understand the steps to set it up it was like chinese to me no clue what it said I am running Redhat Linux 9.0 on the laptop
View 6 Replies View RelatedI need to put a pc together for home use to act as my server. I need recommendations for a asus motherboard. I need it to support 5.3 and looking at asus website I cannot for the life of me figure out what I need. I also want to use a amd cpu. It has been years since I built my own pc and never for linux
View 3 Replies View RelatedI cannot get sound from a machine that has the M4A785-M motherboard, and a Radeon HD 4670..
My details are at: [URL]
I don't get any sound with any version of Lenny on my new ASUS M4A785TD-V EVO motherboard. However the sound works fine when I boot from the Debian Live 60 Alpha1 AMD64 KDE DVD. I can always wait until Squeeze is released and then do an upgrade but I'd like to get the sound working now. Any suggestions?
View 3 Replies View RelatedHaving just Installed Ubuntu 11.4, I require LAN drivers for ASUS A8N5X Motherboard. Where can I get the drivers? And instructions on how to install them.
View 7 Replies View RelatedMy laptop is currently running on Windows 7 Ultimate. I have a 320 GB HDD, which I have partitioned as follows. C: Drive as Windows 40 GB capacity and successively partitioned the rest of the drives for 50 GB capacity and left an unallocated space of 67 GB for fedora 13 x64 installation. The problem that I am facing is, that I am unable to install fedora on this unallocated space..even though I am checking the option for "Creating custom Layout". When I check the option for "Creating Custom Layout" Ive been shown with the only option to install fedora on the unused space on the HDD which is around 265 GB. I am also attaching a screen shot of my disk management. how I can install Fedora on this unallocated space of 67 GB?
View 12 Replies View RelatedThe motherboard has a SiS190 100/10 Ethernet Device. Apparently it worked once during installation and then never again. But it works fine in Win XP (in fact I have SlackWare installed in dual boot) My Internet connection is throgh an ADSL.17 may: one thing led to another and now I have more things to do and learn that time yo do it. smallpond's answer has been very important un showing the way, but Iḿ still working on it
View 1 Replies View RelatedI can't hear any sound in Debian with my new Asus motherboard . In Windows i have no problem.
Linux was reinstalled from scratch and speakers are connected to the green port of the motherboard.
I tried to find a solution all around the web without success.
Here there are links to some specs and logs of my system and to the log of alsa-info.
[URL] ....
I'm starting to spec out a new GNU/Linux boxen. I'm considering the ASUS P6X58D Premium motherboard. Has anyone had any experience with this board in terms of compatibility with openSUSE 11.2/11.3? I'm mainly concerned about:
on-board sound: Realtek ALC889
ethernet: Marvell 88E8056
new interfaces: SATA3, USB3.0
being able to use: AHCI (which I had to turn off on a netbook, Acer Aspire 1410, for hard drive stability), 64-bit kernel I'm planning to use an i7-930 or i7-950 (should the price drop in August as rumored) with 6 GB DDR3 1333 RAM (not planning to overclock, as yet). The graphics card will probably be an NVidia GT240 or so (budgeting about $100 for the graphics card).
Also, I'm hoping to move some old IDE drives over using IDE->SATA 1 bridge cards. Any advice on this? Or should I just get a new SATA 3 drive? For the optical drives (DVD RW/CD RW), I'd like to use bridge cards since there's no benefit for the higher speed SATA interface, or is there?
P.S. For the naive question: As I haven't dealt with 64-bit installs before... I would need the 64-bit kernel for full access to all the extra address space, correct? After that, I can still run 32-bit apps, with a slight speed penalty?
This is really not a Linux or SuSE question. However, the folks on this forum are polite and knowledgeable, so I will give it a try.In the process putting together a new computer.About 99% confident in the following:otherboard: ASUS Crosshair IV FormulaCPU: AMD Phemon II X4 955Graphics card: Gigabyte GV-R685D5RAM: Unknown. ASUS, as well as several other motherboard suppliers, have not approved of any 1x4GB DDR3 RAMS. Has anyone had success with getting a 1x4GB DDR3 RAM to work on the ASUS Crosshair IV motherboard?
View 2 Replies View RelatedI am trying to clone a working Centos 5.4 system onto a new box with a ASUS P5KPL-CM motherboard. I have done so by plugging in a Realtec lan card - but can't get the motherboard lan working. Googling tells me the motherboard has a Atheros L1E lan chip - but I have installed several kmod drivers from ELREPO - but still can't get the on-board lan working. So far I have installed:
kmod-atl1e
kmod-atl1
I have just installed these with yum - but no new hardware appears in the network gui dialogue. Am I missing some step here - or is there another driver I should be looking for.
I installed Fedora fc14.i686 in a VMware player. I have been able to install many packages off the web.
First of all, I'm having this issue: I am having trouble with GIT, it keeps timing out on me. github.com[0: 207.97.227.239]: errno=Connection timed out fatal: unable to connect a socket (Connection timed out). This is happening over a 24hr period so I think its something on my end.
Also, my apache directory is not visible on my local LAN to other machines. I can browse in Fedora, however. Even the machine hosting the VM can't see my var/www/http directory. I set permissions but I have a feeling its a network issue somwhere. BTW, I can ping the Fedora VM (192.168.0.17) from other machines.
I just lost my weekend trying to install Xubuntu 10.04 on my pc I made the ps a while back - its built on a ASUS P4S800D-E motherboard and it has an ATI Radeon 9200 LE graphics card. It has a PS/2 keyboard and mouse, 1Gb of memory and a 160Gb PATA/IDE hard drive (I unplugged the SATA drives) Every time I installed or made a tweak to the config it failed in the same way. It showed its failure by continually repeating the first character typed. Regardless of whether this was the password screen for synaptic or just the first character typed into a terminal. Until the first character was typed the mouse seemed to work ok but then it would stall too
I've tried most things, running Xorg with/without an xorg.conf file, loading the ppa kernel and tweaking loads of bios and grub boot parameters all to no avail. So I think I want a more linux friendly graphics card and I fear I may need a new motherboard. Can someone recommend a replacement graphics card for this motherboard? Can anyone reassure me that my motherboard is ok with linux?
Kpackage manager is not updating. When I try to I get this error. I am un-able to install any packages.
View 8 Replies View RelatedDue to this thread -> [URL] we discovered that my Fedora runs rc kernel. After several tries to update to stable one, no result came. I need your guidance to update my system.
What I tried:
yum update
yum update kernel
yum clean all
The result is the message:
[root@dimitris ~]# yum update kernel
Loaded plugins: langpacks, presto, refresh-packagekit
Setting up Update Process
No Packages marked for Update
Can I update to PAE kernel? This question is for i686 cause it cannot recognize all ram (4GB total, 3.2GB available). I run x86_x64 but I have this question...
I'm trying desperatly to install Ubuntu Netbook Remix on my Asus Eee netbook. I've created an USB bootable stick. It boots. I get to the screen where I can choose the language and where I have the choice between "Try" or "Install". I choose Install. After that, I get to the screen about the preparation of the installation. It says I have enough disc space, that I'm successfly connected to the power and to the Internet. I click on next and... nothing happens! It stays for ever on that screen.
View 8 Replies View RelatedI have Fedora 13 64 bits in Spanish, but Firefox is in English and there is no spanish packages in the repositories...
Adding en_US to language list
Also, I installed yum-langpacks package but set English as default language...
"Adding en_US to language list"
I am trying to install ubuntu netbook remix on my asus netbook.I created a USB drive from windows.On Save and Exit from BIOS setup, system boots from hard drive with Windows 7 OS.
View 3 Replies View RelatedI have an Aldi PC with a Q8200 processor and have installed Fedora11 on this system. Regularly I get updates to install, but also updates for i586 packages, which give a conflict with the x86_64 packages already installed.Sometimes I have missed a i586 package in the update list, resulting in an error next time.Is there a script which automatically filters these i586 packages from the update list?
View 1 Replies View RelatedI am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedI have a desktop PC which initially had the Intel D946gzis mobo, its chipset as video controller, some RAM and so. There I installed Debian without a problem alongside WindowsXP.
I've bought an ASUS HD 4670 video card, installed it on the PC and now the installed Debian does not work, while the Ubuntu live CD refuses to run no matter if I set acpi, apic on or off... it throws me some low memory corruption at position just like shown here. With normal configuration, Debian throws kernel panic (keyboard lights blinking). Anyone have faced this before? Ideas? Thanks!! (meanwhile, debian hides in a virtualbox :'( )
Edited: Tried Ubuntu 9.10 x64 (due to the fact i've a core2duo at 2GHz) and it throws a kernel-panic to me (flashing caps and num LEDs). On screen, can be read different lines with things like:
[ 1.957161] [] rb_erase+0xd6/0x160
[ 1.957266] [] page_fault+0x25/0x30
Could it be something about this new video card having ddr3?
Just upgraded to a super sexy Asus 27" LED monitor. It's awesome, however ther are a few quirks I'm wondering if I just have to live with or if they're fixable. These may not be directly related to the monitor...hence posting here rather than hardware.Specs: Asus 27" LED VE278Q monitor. Nvidia graphics card. Dell 8100 w/ 8GB ram, 64-bit. Fedora 13 running Gnome.
The first quirk is that I have a VNC window open almost all the time and if I leave my cursor on the VNC window, the screensaver won't come on, even if no action has happened on the keyboard or mouse (or in the VNC window). It would be nice if the screensaver worked.
The second problem is that when I'm using the keyboard and/or mouse in the VNC window, apparently, the screensaver doesn't realize the keyboard is being used...and the moment I switch to a different window, up comes the screensaver.
I'm having what I think is a documented hardware issue probably related to the Nvidia driver: at infrequent times, often when I'm using GIMP or other graphics-intensive program, the screen will flicker and/or go completely black for a split second. Distracting as all hell, but not a show stopper. It does not appear to happen when I'm using the web or doing other non-graphic intensive stuff, so I'm guessing this is not the monitor itself, but rather the card or the drivers for it.
installing drivers for my onboard NIC card on my ASUS Nettop EB1007. The NIC is a JMC250 PCI Express GB. I first installed CentOS 5 on it and then it wouldnt show up. So I decided to try installing with Ubuntu and it was perfect. I didnt have to do anything else to get it detected. However, I would like CentOS 5 on this unit to practice on. Below is my attempt to install the kmod-jme-1.0.6.1-2.el5.elrepo.i686.rpm on a fresh CentOS install. Unfortunately, the dependencies are failing.
[root@localhost media]# mkdir /media/usb
[root@localhost media]# mount /dev/sdc1 /media/usb
[root@localhost media]# cd /media/usb
[root@localhost usb]# ls -a
[Code]....
Cent Os 5.3 64bit dosen't recognise the network card ASUS NX110113f0:1023 (rev41)here are some details about the system,
# lspci | grep ther
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
[code]....
im using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.
View 2 Replies View RelatedI'm running Natty 64 bit and cannot install Truecrypt 7.0. I downloaded the tar.gz from [URL] and have tried to install it several times, all without success. I've tried to install it via terminal by running
[Code]...
Each time it goes through the normal steps of having me accept the user agreement and the popup which tells you to run the "truecrypt.uninstall.sh" script to uninstall. The problem is that each time when I click 'ok' at the last step, my desktop environment freezes. I'm running unity 3d. The terminal I started the install process in doesn't produce any output.
Sometimes when the freeze occurs I can still move my mouse, but none of the menus or windows will respond. Other times the mouse will be frozen as well or it will just log me off. I haven't found anyone else talking about this issue and I honestly don't know where to start looking for a way to fix it.
Just purchased a new Mac book (white) Uni-body Model ID 7.1
Intel 2.4 GHz Core Duo
Mac OS X 10.6.4
4Gb Ram (upgraded)
Hitachi 500Gb 7200 RPM (Upgraded)
Installed r-EFIt and then ran disk utility created 3 partitions one for Windows 7 Ultimate 64bit and two for Ubuntu 10.04 the windows install went smooth was able to boot into either OS without any problems then tried installing Ubuntu and then would get errors using the Live CD that I created I burned two additional disks at slower speeds then tried one of them in a another PC and it would work even ran it in live CD mode now have my taste buds wet want to use it on my Mac Book.
When I tried to install on the Mac Book it would fail with error no device found to install it would not even get to select the language with internal DVD drive so I hooked up a usb drive and would get up to step 4 to where you select the partition to install Ubuntu on this is where it gets to the problem it was blank no internal drive was able to get to Gparted in Live mode and same thing the hard drive would not show up.
I booted back into MAC OS X and ran disk utility it shows the partitions. A additional I tried the option to turn off ACPI before running installer still could not find the hard drive also downloaded a live gparted and same result could not see the HDD.