I don't get any sound with any version of Lenny on my new ASUS M4A785TD-V EVO motherboard. However the sound works fine when I boot from the Debian Live 60 Alpha1 AMD64 KDE DVD. I can always wait until Squeeze is released and then do an upgrade but I'd like to get the sound working now. Any suggestions?
View 3 RepliesI can't hear any sound in Debian with my new Asus motherboard . In Windows i have no problem.
Linux was reinstalled from scratch and speakers are connected to the green port of the motherboard.
I tried to find a solution all around the web without success.
Here there are links to some specs and logs of my system and to the log of alsa-info.
[URL] ....
I cannot get sound from a machine that has the M4A785-M motherboard, and a Radeon HD 4670..
My details are at: [URL]
no sound with motherboard Asus M4A78T-E for fedora 13
View 7 Replies View RelatedCan anyone recommend a Linux sound driver for the Gigabyte GA-P55-UD4P rev. 1.0 motherboard.
I've found hints of Linux and many sources for Windows drivers, but so far haven't turned up any candidates for my Debian Lenny system.
I need to put a pc together for home use to act as my server. I need recommendations for a asus motherboard. I need it to support 5.3 and looking at asus website I cannot for the life of me figure out what I need. I also want to use a amd cpu. It has been years since I built my own pc and never for linux
View 3 Replies View RelatedHaving just Installed Ubuntu 11.4, I require LAN drivers for ASUS A8N5X Motherboard. Where can I get the drivers? And instructions on how to install them.
View 7 Replies View RelatedLast Thursday, 3/11, I installed a new mother board (ASUS M4A785TD-V EVO), AMD Athlon II X4 Processor, 4Gig DDR3 ram (RIP JAWS), 1 SATA DVD drive, along with my 2 IDE HDD's. The display was OK during BIOS review, and boot UNTIL it came to mounting x-graphics, at which point the screen went black, and a display message came up saying Out-of-RangeHf: 30KHz-70KHzVf: 50Hz-90HzCurrent Frequency:90.3KHz, 60.0Hz.
Does anyone know what is causing this? I mean, is there no way that Deb 5 X86 is going to run on a quad 64-bit system, or can something else be wrong? Before changing hardware, I had seen indications that this system was backward-compatible to older systems, and the more in depth study I've done since seems to verify this.y be, however, that I completely mis-understand what I am reading - this is all pretty new to me.
I tried booting into Debian 4, Libranet 3, and Linspire 6. They all complained loudly, but differently, about x being inoperable. I can't tell you how they complained because I can't go back and check them. THAT is because, in BIOS, I was testing the system with all the different options for "Internal Graphics", to see if one would work. One of these options was "Disabled". Oh-ho-ho! BAD MOVE!!! it's disabled, all right, including BIOS! I can't believe it. There was no warning, whatsoever. I assumed no engineer in his right mind would allow that option to lock out the BIOS without SOME kind of warning. I'm going to try to call ASUS tech support tomorrow to see if they have a solution, but if anyone knows how to reverse this, please let me know. I suppose the only answer is a separate graphics board. But I don't want to get that if I can't use this MotherBd.-processor setup.
I have driver DVD for ASUS motherboard. This DVD has drivers (motherboard and audio) for Linux, how do I install these packages.
When I tried installing these with package installer, it says cannot install the packge.
I just assembled a new computer with Intel Core I3 processor and Asus P8H67 motherboard and 4 MB of memory. It has a 2TB Hitachi Deskstar Hard Drive and Asus DVD. I am trying to load Ubuntu 10.10 directly (without first loading Windows) without success.
I have tried 4 separate downloads of Ubuntu - 64 bit, 32 bit with Desktop and Alternative. I have changed a variety of parameters and various tricks suggested on other threads. The Desktop (32 and 64) versions get me to Busybox shell with message (Initramfs) Unable to find a medium using live file system. The Alternative version hangs with the messages:
RAMDISK: Couldn't find valid RAM image startgin at 0;
No filesystem could mount root, tried ext3, ext2, ext4, fuseblk;
Kernal panic - not syncing VHS;
Unable to mount root fs on unkown block(1,0).
For parameters I think have tried them all (but not in all combinations). I tried exiting twice from BusyBox as suggested on forums but that just hangs the system. I also turn off the quiet and splash to try and see what is going on....but it is too complex and goes to fast for me to follow.
A final suggestion was that the P8H67 is too new for Ubuntu 10.10 and to try the new version 11 coming out...I am new to Linux and reluctant to try a Beta
The motherboard has a SiS190 100/10 Ethernet Device. Apparently it worked once during installation and then never again. But it works fine in Win XP (in fact I have SlackWare installed in dual boot) My Internet connection is throgh an ADSL.17 may: one thing led to another and now I have more things to do and learn that time yo do it. smallpond's answer has been very important un showing the way, but Iḿ still working on it
View 1 Replies View RelatedThere is no sound on my Debian notebook.I added myself to "audio" group and have "alsa-utils", "pulseaudio", and "firmware-linux" packages installed.
However when I try to play an audio file there is no sound regardless of volume settings.
Code: Select all386,0,0>pthfdr@SALAMAND:/media/pthfdr/SORCNYTH/Media/Audio/Disc 1$ play -V4 01.(I Can't Get No) Satisfaction.mp3
play DBUG formats: opening format plugin `lsx_alsa_format_fn': library 0xc3a680, entry point 0x7f9d270ea8e0
play DBUG formats: opening format plugin `lsx_amr_nb_format_fn': library 0xc3bde0, entry point 0x7f9d269e6690
play DBUG formats: opening format plugin `lsx_amr_wb_format_fn': library 0xc3cb80, entry point 0x7f9d265b81a0
[ode]....
I'm starting to spec out a new GNU/Linux boxen. I'm considering the ASUS P6X58D Premium motherboard. Has anyone had any experience with this board in terms of compatibility with openSUSE 11.2/11.3? I'm mainly concerned about:
on-board sound: Realtek ALC889
ethernet: Marvell 88E8056
new interfaces: SATA3, USB3.0
being able to use: AHCI (which I had to turn off on a netbook, Acer Aspire 1410, for hard drive stability), 64-bit kernel I'm planning to use an i7-930 or i7-950 (should the price drop in August as rumored) with 6 GB DDR3 1333 RAM (not planning to overclock, as yet). The graphics card will probably be an NVidia GT240 or so (budgeting about $100 for the graphics card).
Also, I'm hoping to move some old IDE drives over using IDE->SATA 1 bridge cards. Any advice on this? Or should I just get a new SATA 3 drive? For the optical drives (DVD RW/CD RW), I'd like to use bridge cards since there's no benefit for the higher speed SATA interface, or is there?
P.S. For the naive question: As I haven't dealt with 64-bit installs before... I would need the 64-bit kernel for full access to all the extra address space, correct? After that, I can still run 32-bit apps, with a slight speed penalty?
This is really not a Linux or SuSE question. However, the folks on this forum are polite and knowledgeable, so I will give it a try.In the process putting together a new computer.About 99% confident in the following:otherboard: ASUS Crosshair IV FormulaCPU: AMD Phemon II X4 955Graphics card: Gigabyte GV-R685D5RAM: Unknown. ASUS, as well as several other motherboard suppliers, have not approved of any 1x4GB DDR3 RAMS. Has anyone had success with getting a 1x4GB DDR3 RAM to work on the ASUS Crosshair IV motherboard?
View 2 Replies View RelatedI am trying to clone a working Centos 5.4 system onto a new box with a ASUS P5KPL-CM motherboard. I have done so by plugging in a Realtec lan card - but can't get the motherboard lan working. Googling tells me the motherboard has a Atheros L1E lan chip - but I have installed several kmod drivers from ELREPO - but still can't get the on-board lan working. So far I have installed:
kmod-atl1e
kmod-atl1
I have just installed these with yum - but no new hardware appears in the network gui dialogue. Am I missing some step here - or is there another driver I should be looking for.
I recently bought a used Asus eee 1001PX. It came installed with some spyware called windows which I replaced with jessie. Everything works great but one thing. When I plug in headphones I get no sound in the headphones. If I have some audio running and plug them in while it's playing it doesn't cut the audio from the built in speakers off like it should do. If I start and look at Output Devices in pauvcontrol it seems like it at least recognizes that I have headphones inserted.
I didn't have a chance to test if the physical audio jack was broken while it had Windows running on it but assuming that it's not physically broken, what might be wrong? I know very little about audio, alsa, pulse and that kind of stuff so I hardly know even where to start.
Some info:
Code: Select alllspci -v
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 8437
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code] ....
I just lost my weekend trying to install Xubuntu 10.04 on my pc I made the ps a while back - its built on a ASUS P4S800D-E motherboard and it has an ATI Radeon 9200 LE graphics card. It has a PS/2 keyboard and mouse, 1Gb of memory and a 160Gb PATA/IDE hard drive (I unplugged the SATA drives) Every time I installed or made a tweak to the config it failed in the same way. It showed its failure by continually repeating the first character typed. Regardless of whether this was the password screen for synaptic or just the first character typed into a terminal. Until the first character was typed the mouse seemed to work ok but then it would stall too
I've tried most things, running Xorg with/without an xorg.conf file, loading the ppa kernel and tweaking loads of bios and grub boot parameters all to no avail. So I think I want a more linux friendly graphics card and I fear I may need a new motherboard. Can someone recommend a replacement graphics card for this motherboard? Can anyone reassure me that my motherboard is ok with linux?
how to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.
Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
[code]....
I have a new setup, computer has only been running a couple days. The sound card is onboard, on a P7P55-M mobo. Kernel version is currently 2.6.18-128. There is no sound at all coming from the speakers.
Here are my ALSA drivers:
ALSA Driver verion: 1.0.14rc3
ALSA Lib package: alsa-lib-1.0.17-1.el5
ALSA Utils package: alsa-utils-1.0.17-1.el5
lspci:
00:1b.0 Audio device: Intel Corporation Ibex Peak High Definition Audio (rev 05) code...
Im used suse 11.3 GNOME, many tutorial i try to hear my sound on my speaker but until i wrote this post, i still cannot hear sound on my speaker. This my output...cat /proc/interrupts
CPU0
0: 157 IO-APIC-edge timer
1: 8251 IO-APIC-edge i8042
[code]....
I upgaded my system last weekend with a Gigabyte GZ-X58A-UD5 motherboard, i7 processor, ASUS EAH5770 video card, and 12 GB RAM. Sound has been erratic since then. It generally works for a short time after a reboot, but after awhile (within a few hours) it stops working properly or even completely. I've tried several different settings in /etc/modprobe.d/alsa-base.conf, but nothing I've tried helps.
I am running Kubuntu 9.10 64-bit.
Here is the output of aplay -l code...
I don't have anything connected to the HDMI connection on the ATI video card, and only inputs on the M Audio Delta 44 card.
I'm finishing setting up my new computer.I'm installing ubuntu 10.04.The motherboard is a gigabyte GA-H61M-D2-B3When I plug the computer into my stereo, I get a horrible scratchy buzzing.How can I get rid of it?More info on hardware: Quote:lspci -v | less gives a lot of output, including this:Quote:
0:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
Subsystem: Giga-byte Technology Device a002
[code]....
I've installed the new version of Ubuntu hoping, I didn't have this kind of troubles.I've searched through several forums for the answer without luck, I hope here, I can find some light.I've the next HW And this is the output of the aplay command with the "-l" and "-L" options: aplay -l and -LAnd finally this is the output of the alsa reportI've generated:Alsa Script I hope this information is enough to start something.
View 2 Replies View RelatedI tried to listen mp3 on in, but it was too silent (of course, I tried to put speakers to be louder).. I switched to winXP (as a second OS) on this computer, and sound volume is ok, so I suppose it's problem in OpenSuse... I have ASROCK N68C-S UCC motherboard with nForce 630a sound chip on it.
View 2 Replies View RelatedI'm testing a rather old motherboard (PC-Chips A31G) with both Ubutu Karmic and Lucid, everything seems to work fine but video playing.
I tried flv, mp4 and mpg with both mplayer and totem, but I can only get sound with no video, well, not a black screen but a deformed image (I don't attach an image because every attempt to capture the screen gets a black or transparent video).
I already installed ubuntu-restricted-extras package witho no luck.
What I don't understand is that, if I switch to another motherboard (using the same HDD), everything works perfect. I guess it's a problem with the motherboard's video chipset, but would like to confirm this and know whether there is a solution.
I attach lspci output for the A31G motherboard.
Got this new motherboard and it's running 11.4 of Opensuse and it works great. Even got the DVI working with the monitor with help of instructions I found here. However the sound is poor and the volume controls just as bad. According to the motherboard docs it has THX Tru Studio sound pro, a Intel H67 (B3) chipset. Six audio ports. And the chipset integration by Realtek ALC837. I have tried to find this information in the sound setup with no luck. What was selected was the Intel model (no other specifics was found). According to the Alsamixer it says HDA Intel PCH and the card and chip is set as PulseAudio. What should the sound card be set to other than Intel?
View 3 Replies View RelatedI have a small problem with getting sound to come through my headphone jack with Fedora 13. I switched to Fedora 13 from uBuntu and I had the same problem on uBuntu. I fixed the problem, but I don't remember exactly how. I think it was something to do with editing the alsa audio conf file, but the file is named differently in Fedora. The sound works fine from the internal speakers, but when I plug in the headphones I get nothing. Anyways, I'm on an Asus EEE 1005HA using Fedora 13 32bit.
[code]...
I've seen several posts with people having problems of the speakers not muting when headphones are plugged in.I have no sound from my speakers to begin with.I am by no means an ubuntu expert, so please bear with me.From what I've seen, there are many variations of the Asus K52F. Mine has an Intel Pentium P6200 processor. So far as I can learn, it's got a Conexant sound chipset. Ubuntu does not even seem to recognise that a sound card is present.
View 1 Replies View RelatedMaybe sounds silly but I couldn't find on the web how to install my motherboard sound driver on Ubuntu 9.10 Karmic. I can't use my microphone and Linux can't identify my soundMAX sound card, but I have sound.
View 1 Replies View RelatedI recently bought a decent sound card, the Asus xonar D1. Prior to purchase, I checked the Alsa matrix to make sure that it is supported. I couldn't get it to work after putting it in, so I did a clean install of Suse 11.2. Initially, it didn't work, but after I installed alsa-firmware, it worked. However, flash videos had no sound. I remembered something about this when I fist installed 11.2 with my older card. I looked it up and figured out that it was the PCM issue. However, when I opened kmix, there ws no PCM mixer. I even looked through the "hidden" mixers, making them all visible and maxing each out all without success.
Next, I started the "SDB:AudioTroubleshooting" process. When I got to step 2, I deleted the configurations of the xonar card configuration in Yast. I rebooted and lost all sound. I then started over with the "SDB:AudioTroubleshooting" and could not get anything, though I have not gone through updating Alsa, as I hope it is not necessary.
[Code]...