OpenSUSE Install :: Unable To Mount USB Drive After Latest Update On 11.4
May 2, 2011
I did the latest update on the opensuse 11.4 other day and since then my USB drive is not mounting. initially I thought its gone because my son dropped on the floor. But then when I plugged it to Windows 7 machine it mounted then I plugged it into another Ubuntu 10.10 machine it mounted so I figured out the there is some issue in the latest update. I have all the VMs in this drive and my main laptop is with OpenSuse 11.4
I get the following error when YAST tries to install the latest updates----Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index----could it be from removing KWALLET? Now I cannot re-install it due to this error.
latest update to 11.3 a complete failure afterwards on reboot I'm instructed that I must first install kernel and to strike any key to exit which return me to grub menu. thats it for me and Osuse. 11.3 has been one bug after another and to much for me overcome. I will return once a day to see if anyone can fix this/
i jsut installed opensuse kde and xfce and i cannot mount dvd/cd 's. i am using opensuse 11.3 32 bit. i added my user to the cdrom drive group but still no luck. How to get the cd to mount by jsut clicking on the dolphin icon?
I'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
usb 1-5: new high speed USB device using ehci_hcd and address 4 usb 1-5: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503 usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
I'm a linux newbie so be gentle please. I'm on Lucid Lynx. Last night, the update manager installed updates to the linux kernel header. I'm not exactly sure what that means but it was one of the more important updates as it required a reboot.
This morning, my machine would not boot. After getting past the loading screen, my laptop hangs on a black screen. It was working flawlessly before yesterday. I can boot into recovery mode which appears identical to the regular mode, which works fine and is what I've been using. Also, I used a custom bootscreen, but it seems to have reverted to the default one that comes with the Lucid Lynx install.
Just did an auto update. Among the list of things was an SSL update and now I can no longer connect to my MSN account in Pidgeon. I get an error "unable to validate certificate, the certificate for Omega.contacts.msn.com could not be validated. The certificate chain present is invalid."
i have download openSUSE and can't get it to mount on my hard drive i try and try but it sill won't stay on the hard drive. i like what i see on this os but can't use it.oh the PC im trying to put this os on is a hp m8530f a very good PC at that but i want to use this openSUSE.
I've added a 1TB hard drive as a second hard drive on my PC, mostly because my home partition is full of music and movies, but I am unsure of where to mount it (or what to mount it as). "Yast Partitioner" suggested /tmp /srv or /localI basically want a storage solution for media files which can be accessed by multiple users (including a windows PC using samba)
I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
I am using Opensuse11 and i have created an lvm involving two disks /dev/sdb and /dev/sdc. I have created a lvm volume group of 5 GB with the above 2 disks. The problem is it is unable to mount at boot time. It is giving the following error messages:-
mount: special device /dev/TST_VOL/VOL1 does not exist ... ...
I just upgraded from 11.2 to 11.3, everything seems to be working fine except that my other hard disk partitions are un mountable as my normal user. I used to be able to click on the drive in Dolphin and it would ask for the root password to mount it, but now it gives the error that the action is denied by org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action, result) What do I do to fixed this? I have checked as many settings as I can and can't find it. I would like to avoid editing the Policykit.conf file manually if possible (if that even is the right file).
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
i had the problem that i couldn't surf access the internet while DNS and PING worked well. That i solved with ipv6.disable=1 at boot time. Now i can suf the internet with a browser but YAST is still unable to access the repositories which are accessible with a browser. Can someone please help me what the problem with YAST is?
I cannot download the timezone RPM(and other RPM's) from several repositories(I haven't found ANY that will allow me to DL the timezone RPM's and I have checked 8 so far!) This breaks the update as it will stall on any of the undownloadable(new word for O.E.D. undownloadable) RPM's
Subject: grub no auto update new hard drive.doc Date: 07/26/2010 03:48:45 PM grub no auto update new hard drive.When installed 11.2 on Western Digital VelociRaptor 150 GB hard drive and now installed 300 GB VelociRaptor drive. Your grub does not update correctly to identity the op systems after the new drive is imaged; youre kidding right? I request that you provide the instruction for correcting this; you must have and auto update for grub.
When I try to apply the latest updates on my 11.3 system, I get the following Warning. I think this is because I did the "switch system packages" to Packman after I installed it. What is the recommended solution?
#### YaST2 conflicts list - generated 2010-07-27 16:30:26 #### patch:k3b-2785.noarch conflicts with k3b.x86_64 < 2.0.0-1.1.1 provided by k3b-2.0.0-1.pm.2.7.x86_64 [ ] do not install patch:k3b-2785.noarch
I have a problem in my ubuntu 10.01 that it can't load a drive/volume in ubuntu. When I tried, it said: "Unable to mount location Error mounting: mount: /dev/sda1: can't read superblock". And when I boot my pc with 'Windows', it said : "UNMOUNTABLE_BOOT_VOLUME" under a blue screen. What can I do to solve this problem?
I am trying to update four OpenSUSE 10.3 servers. This worked once on one server, but I have been unable to repeat that success. I use yast's Online Update to select repositories, but at the end of the repository refresh they keep coming back with 'No active update source is available. Exit Online Update now?' I get this error: Download failed: File /repodata/repomod.xml not found on media: [URL]
It appears to connect to remote repositories, but always fails. Is it realistic for me to expect to update 10.3, or is it a lost cause? I am not ready to jump to 11 yet, but I am required to update them. I am a newb, so I am not clear on the process. Are package versions locked in place for specific versions of OpenSUSE? If so, how can I find out what the final versions were for 10.3 so that I can at least tell my auditors that they are as up-to-date as they can be?
I've installed opensuse 11.3 on my computer (well actually Ive done it twice, once with full DVD image and once with network install). Everything was OK until Ive made update (yast/software/online update <-- BTW kupdate applet isn't working, just update bar appear and stuck on 0%). i haven't installed any additional packages, only the defaults (KDE desktop). after update only fail safe option is working (booting normally and looks like normal desktop, no visual differences between normal and fail safe booting, if there should been any). When I've tried to find solution for this problem, very ofter answers were -> graphic drivers problem (im using ati hd 4670 AGP <-- yea, AGP . well when i start normal boot green screen with lizard logo appear, then screen goes black for a second or two, then the green screen come again, and after another few second screen goes black permanently with working hdd for 30-40 second (hdd led blinking) BTW i have windows7 pro (booting fine) on this machine too, it was installed as first system on hd0,0. opensuse was installed on stand alone PATA disk (secondary EIDE master, ODD on slave). how to gather info which u all need to get this problem more detailed. PS> sorry for my English, its not my native language.