i have download openSUSE and can't get it to mount on my hard drive i try and try but it sill won't stay on the hard drive. i like what i see on this os but can't use it.oh the PC im trying to put this os on is a hp m8530f a very good PC at that but i want to use this openSUSE.
View 3 RepliesI've added a 1TB hard drive as a second hard drive on my PC, mostly because my home partition is full of music and movies, but I am unsure of where to mount it (or what to mount it as). "Yast Partitioner" suggested /tmp /srv or /localI basically want a storage solution for media files which can be accessed by multiple users (including a windows PC using samba)
View 9 Replies View RelatedI bought a "WD My Passport Essential 320 GB" usb drive. When I plug it in (suse 11.2 x86_64 gnome version), it won't automount, a message appears ".../dev/sr2 is not a valid block device", I can not mount it manually neither Don't have a clue how to proceed in solving this issue. The drive is a bit strange though, it has some software on it for protecting data, which I wont need, but can't get rid of it neither. However when I connected it to my laptop running ubuntu 9.10 x86_64, the drive automounted ok, so I guess I must be missing some additional software on my suse. The drive was initially NTFS formated, but I did reformat it to FAT with ubuntu.
View 9 Replies View RelatedI'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
Quote:
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503
usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
[code].....
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
I'm running Opensuse 11.2 and am using a couple of USB hard drives to store large data. One of these drives is formatted with FAT32 and one with NTFS. When I plug-in a USB device KDE4 shows me a little pop-up asking what I want to do with it, I select to open it in Dolphin which of course automatically mounts it.
My question is what if I want to change some of the mount options - is this possible without reverting to manual mounting? And second question is what system does it use to automount - Fedora, Debian and Ubuntu are all deprecating HAL in favour of pure udev, is this the case in Opensuse too?
HALRemoval - Debian Wiki
https://wiki.ubuntu.com/Halsectomy
Features/HalRemoval - FedoraProject
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
As my proficiency with Linux improves slowly, I've been trying to find the answers for myself, but in this situation I must admit I find myself rather stumped. I have a perfectly nicely working Fedora 12 install on an 80GB SATA drive, and when it hit an error and wouldn't boot last week (easily fixed with fsck from the initial command line) I panicked and ordered a new 250 GB drive. It got here and I might as well use it, I thought to myself, so I went about trying to figure out how to move my install without having to reset all of my settings, programs and so on. I didn't want to mess with dd because I'm not so so clear on resizing my partitions once the copy is done (if someone thinks this is a better idea I'm open to suggestions.) After some poking around I found this set of instructions which I attempted to follow to the letter, but hit some snags. I understand this thread I am referring to may be a bit outdated, which is why (I assume) I hit a bump here
Code:
# mount /dev/hdy1 /boot
mount returns an error demanding I specify the file system type. At a loss, I barreled on until
Code:
[Code]...
To summarize, I partitioned and mounted my new drive using fdfisk and the instructions provided above, then used rsync to copy over all of the files, so as far as I know the new drive is ready to go, just not yet bootable. Opening the Grub.conf file in Kwrite (as root) returns a blank page. What do I do now?
As a side note, you can see that I am not too squeamish about the terminal, so I would prefer to find a "command line only" solution to this relatively simple (?) procedure.
I've used YAST to include a USB hard disk in the export list and mount it to remote machine with NFS. That worked first time the disk was mounted. On the next reboot I saw that the USB disk was mounted again in "/media" but in new folder and its previous folder existed but empty and was mounted with nfs. It seems that first nfs comes mounted in booting time and then USB gets mounted after logging as a user. USB hard disk finds its folder occupied and automatically creates new folder in "/media". What should be done in order to USB hard disk and nfs to be mounted in the same point automatically on the boot ? The second question : When I mount an external disk to be accessible remotely with nfs I get refused to unmount the disk as a USB device. Is it possible to be unmounted as a USB disk done without unmounting it as a nfs as well?
View 5 Replies View RelatedI would like to increase the storage space available to users. I am planning on adding another 120gb hdd and want it available to users in their home space. Is that possible? Also, what happens if you change hardware? If I changed my cd drive to a dvd-rw will suse 11.2 simply find the change and update the system (like in windows)
View 3 Replies View RelatedI want to dual boot openSUSE 11.2 and Windows 7. I already have Windows 7 installed but I have encountered multiple issues in the past with trying to make dual boots. Usually when I install Linux, GRUB decides it wants to go into world domination mode, and "breaks" my Windows installation. I have reason to believe this is because the distros I use come with legacy GRUB, (v0.97) and for some odd reason it lacks commands such as "update-grub" etc. This means I cannot add Windows 7 to the boot menu without going into extreme complications, which have NEVER, I repeat NEVER succeeded. When I boot the Windows drive directly, I get some error about GRUB not finding the device, and it puts me into a grub rescue command line. Now I am no expert in this field at all, but wouldn't that mean that GRUB wrote itself to the MBR of...oh I don't know, ALL of my hard drives? I really want to install openSUSE 11.2, but from bad experience I am really put off as I know that it ships with legacy GRUB v0.97.I am also running Fedora 13 at the moment, I have quite an experimental dual boot running..been trying to get GRUB 2 for hours now, it is definitely there but no commands work, "upgrade-grub-from-legacy" and "update-grub" return with command not found. I've heard this is just a bug but can anybody confirm that there will definitely be a way for me to "fix" my windows installation after it gets "broken" by GRUB?Second idea, unplug my windows hard drive while openSUSE installs?
View 9 Replies View RelatedI did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted.
I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive.
However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message im given means I think it could be trying to fchk it.
Do I need to do something more like remove /dev/sdd ?
I'm using opensuse 10.2 when I rebooted the my pc I got the message (in the url).P0216_171010 | Flickr - Photo Sharing!I can not boot into tty1 or tty3,5. I tried to repair with Opensuse CD but can not.
View 1 Replies View Relatedj have just installed suse linux 11.2 on my pc , the problem i am having is i cant use my windows hard drive . i have downloaded and inatalled NTFS-3G and still it wont work . i can access the windows hard drive and look at what is on it ,ie pics , music ,films.
View 9 Replies View RelatedI've got a weird bug sinds I've updated to 11.4. On boot, the main hard drive isn't recognized as /dev/sda but it changes from time to time (probably according to other removable medias plugged in or not). It has been sdb, sde... but not sda anymore.
The trouble is that it boots and then it tries to find /dev/sda2 (the root partition). As it doesn't find it asks me sether he should take "SAMSUNG...whathever...-part2". Answering Yes solves the problem. But then, if I change in Grub the /dev/sde2, it still keeps changing of name. How could I have my hard drive back to /dev/sda2 ?
My /etc/fstab:
Code:
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UYB03169-part1 swap swap defaults 0 0
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UYB03169-part2 / ext4 acl,user_xattr 1 1
proc /proc proc defaults 0 0
[code]....
I have a Chrome OS .iso that I can booting from CD but only in text mode [the computer has issues] and I want to live install it to the hard drive, but all I have is the linux prompt. Is there a command to do that? I tried install, but I still don't know what to do.[I'm fine with a complete install overwriting everything]
View 5 Replies View RelatedI got a new laptop, a Dell D400. I want to swap my hard-drive from my old laptop into the new one, and did so... but then got an error stating that my CPU didn't support PAE.
As far as I was aware I hadn't actually installed a kernel with PAE enabled [as I always pick a real-time kernel for audio work]: but then read that lots of the newer distibutions are enabling PAE by default [which is what's caused the problem].
Is there an easy way of disabling PAE in the existing kernel? Or would it be easier to downgrade to another version of OpenSUSE? I'm on 11.2.
I came in this morning only to find that the Intel Core2 hyperthreading Dell machine is dead. It appears the processor is fried.
I have a new white-box X2 system that I will replace the dead Dell with. The X2 (AMD) does not have a hard-drive (HDD) so, I will simply put the SATA hard-drive into the PC.
Some of you may know how to do this, but I don't know where to begin after I get the Hard-drive in. (I know how to move a Windows configuration from one PC to another and handle it as it begins to blue screen (BSOD), but I don't have a clue with Linux)
This system was built with GRUB. At the very least, I expect the GRUB boot managet to surface on the display. But, what next....
I was testing an OpenSuse setup as a server. Nothing fancy and NO applications added. The only customization was the MB's LAN card and the display was set at 1024x768. I had 2 users, root and myself. What would you do? Is there some boot time options that I should follow?
I just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
View 4 Replies View RelatedI am trying to install opensuse on an IBM 8188 desktop with a single SATA hdd. The software appears to load just fine.. standard install but when I reboot the box .. believing it should just boot from the hard drive I get the message no OS installed. I've adjusted the bios and the drive order and I have changed to install parameters for APC or APIC.... you know what I mean... doesn't matter NO JOY IN MUD VILLE.
View 9 Replies View RelatedWhat I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
View 9 Replies View RelatedI downloaded x86-64 hybrid DVD and done everything according to instructions from Installation without CD - openSUSE.After booting from USB HDD, the first page took about 3 minutes to switch menu to the installation media option then afterwards the installation got stuck on Hard drive detection (probably 2 hours before i rebooted into windows 7). Installation scenario is:
Machine: Compaq presario C767TU
HDD: 320 GB with Windows 7 Ultimate on root partition, all other partitions NTFS
Free Space for Linux: 30 GB (Extended partition) currently having Mandriva 2010 with /swap 2GB, / 10GB,
[code]...
I just wonder how to best partition a harddrive with essential folders.
My current installation has a layout like this.
The rest is in '/' integrated.
Does it make sense to give more folders a own partition? And if so, how much should you apply to each folder?
There are 2 users on the computer and there is nothing special or big installed.
I have currently 2 more harddrives which host music/picture & movie data's.
The reason for my question is just that i want to save my data in case of one folder failing.
Subject: grub no auto update new hard drive.doc Date: 07/26/2010 03:48:45 PM grub no auto update new hard drive.When installed 11.2 on Western Digital VelociRaptor 150 GB hard drive and now installed 300 GB VelociRaptor drive. Your grub does not update correctly to identity the op systems after the new drive is imaged; youre kidding right? I request that you provide the instruction for correcting this; you must have and auto update for grub.
[Code]...
When I first installed the openSUSE, I had to extract whole iso to sda4, because there was some kind of with CD (scratched or something like that), Now I want to add this part to grub, so that when I want to reinstall it, it will be ready for me. I tried doing this with yast, but could't figure out whole thing.
My current setup:
kernel image: (hd0,4)/boot/i386/vmlinuz-xen
initial ram disk : (hd0,4)/boot/initrd-xen
root-device:/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4
vga-mod:1024x768, 24 bits (mode 0x318)
optional parameters: resume=/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4 splash=silent quiet showopts
This tries to do it, but gives error while trying to boot.
I have a dual boot windows XP/OpenSuse 11.3 system running from a hard drive. They are both 32 bit in spite of the fact that the system can run 64 bit.
I would like to upgrade to Windows 7 64 bit (the wife insists, not yet a Linux possibility) and OpenSuse 11.4 64 bit, but having the programme files on an SSD for faster loading, with my data files on the existing hard drive.
I'm happy with the notion of getting the SSD going as a dual boot system. With Windows, as I understand it, it can tell it fairly easily where to look for the "my documents" folder on the hard drive.
However, the Home directory in Linux is not quite the same. How (if it's possible) could I run the SSD but use my existing Home directory on the hard drive?
I am running OpenSuse 11.4 with Gnome3, with 2 hard drives. One is for the system and has three partitions - root, swap, and home. The second is only data storage. Last week I started getting popups stating I had a hard drive going bad. I checked SMART status in disk utility and had several bad sectors on the system drive, so I cloned the drive to a new one with Clonezilla. Here is where everything went kooky. When I booted the new disk I had a ton of errors at boot along the lines of unable to find a drive. Upon closer inspection I realized the the system located the drives by device id instead of the traditional /dev/sdx. So I started playing with grub settings but never could get it to stop looking for the old hdd. Next, I popped in my net install disc and found I could do an upgrade install which proceeded normally. When I rebooted, no more boot errors, but I get to the black screen with spinning cursor and it will not proceed any further, I even let it run overnight and when I woke up, spinning cursor. As for troubleshooting, I was able to CTRL+ALT+F2 to a console and log in as root successfully but not as a user. When I try to log in as a user, I enter my username, then password, the "have a lot of fun" flashes by quickly and I am returned to a login prompt. I logged in to the console as root and created a new user and tried logging in again, but same thing. I am able to do an ls -l on /home/mike and all my files are there and the listed permissions look ok. I am at a loss as to what to try next. My old hdd will still boot, I just pulled it to reduce risk af data loss. I have never used auto yast before but I always see the prompt for it during an install. Can I clone the system with auto yast on to a different hard drive. Does it strip the by-device-id from the image? Which logs should I check?
View 5 Replies View RelatedI did the latest update on the opensuse 11.4 other day and since then my USB drive is not mounting. initially I thought its gone because my son dropped on the floor. But then when I plugged it to Windows 7 machine it mounted then I plugged it into another Ubuntu 10.10 machine it mounted so I figured out the there is some issue in the latest update. I have all the VMs in this drive and my main laptop is with OpenSuse 11.4
View 9 Replies View RelatedI recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies View RelatedTrying to recover data off a shot hard drive. XP system. says I don't have permission to open the drives/folders.. not the owner...
View 6 Replies View RelatedHere's what i'm trying to do: i have a 300GB IDE hard drive that has a OpenSuse build. I am trying to replicate this HD so that i can have another box similar to the original one...my second drive is 500GB SATA.
So far, I just ran a 'dd' command to copy the 300GB to 500GB. Now, after having read on internet, i realized i need to change fstab & /boot/grub/menu.lst. specifically, we need to change for ex:/dev/disk/by-id/ata-Maxtor_7L300S0_L60LCJ0G-part1 to /dev/disk/by-id/sda1 i did use a Ubuntu LiveCD to access the fstab and changed the line as mentioned above. Now, how do i change the menu.lst?? right now, when i try booting up from this HD, i have issues. specifically, i get this error message: could not find /dev/VolGroup00/LogVol00