OpenSUSE Install :: Unable To Mount Drives After Upgrade
Jan 10, 2011
I just upgraded from 11.2 to 11.3, everything seems to be working fine except that my other hard disk partitions are un mountable as my normal user. I used to be able to click on the drive in Dolphin and it would ask for the root password to mount it, but now it gives the error that the action is denied by org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action, result) What do I do to fixed this? I have checked as many settings as I can and can't find it. I would like to avoid editing the Policykit.conf file manually if possible (if that even is the right file).
View 6 Replies
ADVERTISEMENT
Jul 29, 2011
After installing 11.4 my fstab entries for CD and DVD drives as well as floppy generate errors when I try to mount them automatically or via Nautilus when inserting CD or DVD. The icons and CD/DVD name show up ok but will not mount. Manually mounting via terminal command works. Here are the relevant lines from fstab
[Code]...
In /dev scd0 and scd1 are symlinks pointing to sr0 and sr1 respectively. The above error message was generated after attempting to load a CD in scd0 i.e. my laptop internal CD/DVD drive. Lines 10,11 and 12 are the fstab lines quoted above.
View 6 Replies
View Related
Dec 19, 2009
I'm using openSUSE 11.2, with some eSATA hard drives. For some reason, they're set to read-only, and I can't change it. I set parameters in fstab as fmask=113,dmask=002,umask=0002,rw Oddly, I was able to delete a file in there, but my samba users have read-only access, and I can't use chown or chmod: I get no error message, but nothing happens.
View 6 Replies
View Related
Jan 21, 2011
I have two non-system drives with archive files. Each drive is formatted with one primary partition only, occupying all the drive space. In each drive there will be a number of directories with files in them, like this:
Drive 1:
/directory1/directoryXXX/files
/directory2/directoryXXX/files
/directory3/directoryXXX/files
Drive 2:
/directory4/directoryXXX/files
[Code]...
View 2 Replies
View Related
Mar 10, 2011
a few days a go I got Samba messed up and I decided to just reinstall Ubuntu. Ubuntu resides on an 80GB drive and I have 2 1.0 TB drives that I use for storage. At one time (pre-Ubuntu) they were connected to a VIA SATA RAID card and I had them on a software RAID under Windows XP. Both worked absolutely fine under Ubuntu 10.04 (which had bee progressively upgraded from the original install of 9.04.
Now, both drives have been given the same label, and neither one will mount because the file system type is reported as "via_raid_array" rather than the EXT4 that they both should be. TestDisk can read them and identifies the partition as a Linux partition, and the data seems to be there. I have even reformatted one of them and still, it will not mount.
View 3 Replies
View Related
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
Jul 3, 2011
I am attempting to use SuseStudio "preload" and "live" .iso images and the instructions at SDB:Live USB stick - openSUSE to create a bootable USB drive.dd_rescue ends after the expected amount of time--without reporting errors--yet "fdisk -l" reports that the device does not contain a valid partition table. The USB key does not boot and appears to have no data.
For what it's worth, my build host is Gentoo on 2.6.39, and I have the latest dd-rescue available. The USB disk is a PNY attache 4GB and works fine with any ISO's supported by unetbootin. The only other bare metal I have here is a netbook running Mepix, so I can't make use of solutions that start with "Boot your existing OpenSuse workstation
View 3 Replies
View Related
Aug 8, 2010
I am having problem mounting my 2nd hdd and external hdd, it keeps giving error msg saying only root can do it.
rudy@rudy-desktop:~$ sudo fdisk -l
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I am having problem with sdb1 (SFS file system ?) and sdc1 (external hdd)
View 1 Replies
View Related
May 9, 2010
I installed backtrack3 but i am not able to mount my drives, i have windows-xp
View 5 Replies
View Related
May 17, 2010
Ubuntu 9.10 64 bit
Can't mount external usb drives. There are no errors, they just don't show up anywhere.
Also Trash icon has disappeared from bottom panel, is inaccessible from Nautilus - "Sorry, could not display all the contents of "trash": Operation not supported" - and Desktop icons default to 'Keep Aligned' every time I restart.
etc/fstab with a flash drive and an external HDD plugged in code...
View 2 Replies
View Related
May 13, 2010
I am running 10.04 Lucid Lynx 64 bit. Whenever I insert a CD or USB flash drive, I get the error "Unable to mount - Not Authorized". I can, however, mount these things by using the mount command from the console as root. I suspect that either the component of Lucid which is responsible for automounting has a bug, or there is some kind of permissions bug with the way Ubuntu sets up the primary user. Does anyone else have this problem? Is there a workaround? Should I file a bug report?
View 9 Replies
View Related
Mar 13, 2010
New server ubuntu 9.10 install with Samba set up. Drives were mounted before Samba, but after samba was set up and I can see the server on a windows network, I can not get the usb external drives to mount or be seen at all. I also added ubuntu desktop. I used this link to set up the server and samba. [URL]
The external drive is a box of 4 drives formatted as ntfs, worked fine before I set up Samba. I am assuming when I edited the fstab toward the end I did something, just not sure what. The drives are (or were showing up as) /dev/sdb1, sdc1, sdd1, and sde1. I tried to follow the wiki on how to maybe set up automounting and thats when I found they werent even showing up in fdisk. "Unable to mount location, failed to mount windows share"
View 17 Replies
View Related
Jul 21, 2010
I was running openSUSE 11.2 on a Dell Studio with a mirrored disk. The upgrade to 11.3 went well it seemed until it got to the point of installing the new bootloader. Then it couldn't mount /boot. Otherwise it seemed to go OK though.It completed and rebooted. I see a very brief flash of the word GRUB on the reboot, but then the screen blanks and I get the BIOS messages again.How can I now install GRUB so that I can boot. I had a similar issue with 11.2 in the past, and was able to repair GRUB using 11.2's DVD's "Repair Installation" which had tools to reinstall GRUB.11.3's DVD is missing this option.I'd prefer not to do a fresh install as then I will have a lot of OS setup to repeat (Samba, Apache, Trac, etc.....)
View 9 Replies
View Related
Feb 27, 2010
I have a windows XP Pro machine and also a Server running ubuntu, the server was built for me and the builder is no longer available for consultation. The server drives which were on my desktop beside my C drive were working flawlessly allowing me access until windows started running quite badly which meant I had to reinstall it. After the reinstall I could not see the drives displayed and I am unable to access them from windows. And also not able to mount them. The server has not been switched off at any time and does not even have a monitor or keyboard or mouse. I have not done anything to change any settings to it. I have zero knowledge of the system. My windows administrator password is exactly the same I have looked on the server and my files are intact I just cant access them from windows which I need to do.
I got the following details off the server:
KERNAL LINUX 2.6.27.5 - 117. fc10.i686
GNOME 2.24.1
MEMORY 881.4 MiB
Processor AMD LE 1620
Samba Server Version 3.2.4-0 fc10
I was told the drives should appear on their own but that's not happening I am not able to sight them at all file sharing and printer sharing is enabled.
View 3 Replies
View Related
Jan 19, 2009
I am using Opensuse11 and i have created an lvm involving two disks /dev/sdb and /dev/sdc. I have created a lvm volume group of 5 GB with the above 2 disks. The problem is it is unable to mount at boot time. It is giving the following error messages:-
mount: special device /dev/TST_VOL/VOL1 does not exist
...
...
[code]....
View 3 Replies
View Related
May 2, 2011
I did the latest update on the opensuse 11.4 other day and since then my USB drive is not mounting. initially I thought its gone because my son dropped on the floor. But then when I plugged it to Windows 7 machine it mounted then I plugged it into another Ubuntu 10.10 machine it mounted so I figured out the there is some issue in the latest update. I have all the VMs in this drive and my main laptop is with OpenSuse 11.4
View 9 Replies
View Related
Mar 16, 2011
A few days ago I upgraded my workstation from OpenSuse 11.2 to 11.4 and found that when I got to an X login screen I could not type anything though the mouse worked. If I went straight to a terminal, such as by booting to runlevel 3 the keyboard worked fine so I figured the problem was related to Xorg. I did some research on the web and tried various fixes, such as reloading the proprietary Nvidia drivers, trying the nouveau drivers, booting with the nomodeset option, as well as trying most of the suggestions in this excellent article: SDB:Configuring graphics cards - openSUSE. No of these solutions remedied the problem.
Eventually I looked closer into the new (at least compared to 11.2) configuration for xorg. If I used the xorg.conf.install file or used an earlier Nvidia-specific xorg.conf file the problem continued. After taking a closer look at /etc/X11/xorg.conf.d/90-keytable.conf file I noticed all of the values for the options were blank, just "". I set XkbLayout to "us", started X and I had a functioning keyboard!
View 1 Replies
View Related
Jan 15, 2009
i jus migrated from Ubuntu to openSUSE 11.1 on my desktop. N nt was i disappointed by the automatic mounting of pendrive/cdrom, I really can't get it working
View 4 Replies
View Related
Feb 16, 2010
I just installed openSUSE 11.2, but I can't use my two optical disk drives /dev/sr0 and /dev/sr1 because the operating system can't find them. These drives aren't listed in my fstab file:
/dev/disk/by-id/ata-ST3160815AS_9RA615CK-part5 swap swap defaults 0 0
/dev/disk/by-id/ata-ST3160815AS_9RA615CK-part1 / ext3 acl,user_xattr 1 1
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
Should they be listed here? If so, what do I need to write in order to reference them correctly.
View 5 Replies
View Related
Mar 13, 2011
I was using 11.3, everything worked fine Upgraded to 11.4, now no drives will automount. As a result applications like Nero and K3B cannot find my DVD drive. I can access the drives from an application like VLC where I can enter the device path /dev/dvd
Dmesg and tail -f /var/log/messages output the following error:
118.604577] udisks-daemon[6574]: segfault at 18 ip 00007f5597c6b990 sp 00007fffd2e65470 error 4 in libdbus-glib-1.so.2[7f5597c60000+20000]
[ 118.757166] udisks-daemon[6580]: segfault at 18 ip 00007f557b302990 sp
[Code]....
I suspect there is a bug or incompatablitiy with HAL/dbus/udisks but I cannot track it down.
View 9 Replies
View Related
Jan 9, 2010
I just recently updated to openSUSE 11.2, but after restarting my computer, I was unable to do anything with the keyboard(type my password, CAPS LOCK, Ctrl+Alt+Backspace) or move the pointer with my wireless mouse. After restarting the computer again, I turned on the touchpad of my laptop and was able to move the pointer using the built-in touchpad. After yet a 3rd restart, I could not move my pointer using any method.
After a 4th restart, I chose to enter the failsafe mode, where I could attempt to find the problem from the command line. I manually started KDM as root by typing in "kdm", but nothing happened, which means that the screen did not switch into graphical mode, but the terminal only accepted the command. Then, I manually started X as root by typing in "X", and X started. I only saw a black screen, but I could not kill X by the traditional "Ctrl+Alt+Backspace" and was forced to shutdown my computer via the power button.
I do want to note that on every boot of my machine, "WARNING" messages have begun appearing, but they went so fast that I could not read them. If there is any way to read them, I would greatly appreciate knowing. Also when updating my machine, I remember ignoring some dependencies for kernel-extra, kdm-branding, sox, and gcc44-fortran; but I did not believe that ignoring these dependencies could cause a broken system so I proceeded with the upgrade.
View 8 Replies
View Related
Sep 17, 2010
I have booted up from openSUSE 11.3 on a USB stick. When i go into Dolphin (the file explorer) and try to open a harddrive, I get the error:
Code:
An error occurred while accessing 'MyHardDrive', the system responded: org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action,result)
View 9 Replies
View Related
Mar 9, 2010
My computer
AMD phemom II 955 X4 Black Edition 3,2 Ghz
Asus M4A785TD-M EVO micro atx
Kingston 4Gb Ram DDR3 1333 mhz (KVR1333D3N9K2/4G)
Disco Duro Western Digital 1 terabyte
LG GH24 Super Multi DvD rewriter
menu.lst
fstab
fdisk /dev/sda
Orden (m para obtener ayuda):
Bios
I have Sata=AHCI
Sometimes it starts and sometimes not. the RAM is memtest OK. The test detects a firmware in the micro hole 15 to 16 mb of memory. The rest is OK.
View 7 Replies
View Related
Jul 29, 2010
Since I installed 11.3 I have noticed the /srv and /local mount points are empty! I also can no longer see my hard drives that have no mount points. I couldn't mount any hot plug media either but now have that fixed. I won't go into the mess I have with my video card and getting the x server started....
I did have Xampp installed to /srv/www but don't even know where it is now!
fdisk -l
Disk /dev/sda: 36.4 GB, 36401479680 bytes
255 heads, 63 sectors/track, 4425 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
I had no problems with this in 11.1 until a month ago when I updated and it seemed to keep losing the permissions for these drives as once I accessed them via Dolphin they would be accessible. Now they are not even visible in a file manager!
View 2 Replies
View Related
Apr 28, 2011
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
View 8 Replies
View Related
Jun 21, 2010
I recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies
View Related
Apr 1, 2011
I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):
Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!
Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).
View 9 Replies
View Related
May 9, 2010
upgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies
View Related
Nov 21, 2009
Quote:
I've upgraded to fedora12 from fedora11 using preupgrade.
The process was successfull till the first boot, where I got above error message.
View 1 Replies
View Related
May 13, 2010
I had 9.10 installed on my IBM Lenovo Thinkpad, x301. I was performing updates as normal, and chose the Upgrade button to upgrade me to 10.04. Everything started fine, but upon reboot, no bueno, Kernel Panic!
The exact message was "Kernel Panic ubuntu - not synching VFS Unable to mount root fs".
I thought this was a grub issue. Since grub2 now is installed... But it was not. I think it ended up being a problem with some of my configuration files.
I have three kernels I tried:
1. 2.6.32-22
2. 2.6.31-21
3. 2.6.31-20
The first threw me into the kernel panic.
The second would hang on "init crypto disks"
The third would hang on "checking battery state"
I noticed (from reading another thread) that while these are loading up that you can click on alt-ctl-F1 thru F6 and get prompt. (I also had my home directory encrypted, thought that was part of the problem, but it wasnt).
Once I get passed the loging, I am able to poke around. I tried manually start Gnome via "sudo service gdm start", but it failed. Said it was missing a configuration file. Then I tried on "sudo dpkg-reconfigure gdm" and it would not work. Saying some configuration files are missing or broken. It also said something about dpkg --configure -a, I am assuming this configures everything...
So I tried "sudo dpkg --configure -a" And selected 'y' to every option. Which basically installs the package creators default settings, and viola! Works.
Just wanted to share that knowledge for the other stuck in the upgrade hell.
Normally I would just copy my files off and reinstall, but it was encrypted... Another headache. I guess good in case someone stole my laptop.
Remember try to "sudo dpkg --config -a"
View 7 Replies
View Related
