OpenSUSE Hardware :: Bearpaw Scanner Not Recognized?

Nov 15, 2010

I have a Bearpaw 1200CU scanner that is not recognized by Yast, so I cannot use XSane to scan my images. Is there anyway to get the driver?

View 2 Replies


ADVERTISEMENT

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

Ubuntu :: Can't Get The Scanner Recognized By Xsane ?

Mar 4, 2010

I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.

I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.

Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.

The printing side of things works fine but I can't get the scanner recognized by Xsane.......

View 5 Replies View Related

Debian :: Scanner No Longer Recognized After Update

Nov 30, 2015

I am running Wheezy 7.9 32 bit, with the kernel Linux 3.2.0-4-686-pae, and Gnome 3.4.2 on an Intel Pentium CPU G3420 @ 3.2 GHz. I installed a new printer in August, an HP Officejet 7612 all-in-one printer/scanner/copier, and it worked perfectly as both a printer and a scanner first time, despite not being listed on the supported list in SANE. Two weeks ago, I got a general software update notification, and did the update. Now the scanner is not recognised. The printer still works fine as a printer, but when using Simple-scan, I get the error message "No scanners detected. Please check your scanner is connected and powered on". I have had a look round on Google, and all the suggestions made do not work.

I tried the suggestion to add myself to the scanner users list on my PC which made no difference (even though the scanner previously worked without my being added to the scanner users list).

I have deleted the printer and re-installed it using CUPS, but that still has no effect. I tried re-installing HPLIP also to no avail, and I have now lost the toolbox on the drop down menu under <Applications> <Accessories> <HP Toolbox>, as when I click on it, nothing happens.

It would seem that something in the update has messed up Simple-scan. Looking at the dpkg log (is this the right thing to look at?) for the date of the update, I cannot find anything which directly involved SANE, so I think that it might be something else which has affected SANE. How I can find out which update did the damage? I don't normally do anything except accept recommended updates, so I am a bit lost as to what to do.

View 2 Replies View Related

Fedora Hardware :: HP All In One Scanner - Unable To Get Recognized

Jan 4, 2011

I have purchased an HP 2050 all in one Printer Scanner. The Printer works fine but so far I am unable to get the scanner recognized.

View 14 Replies View Related

Ubuntu :: New Scanner Not Recognized By Xsane / Sort It?

Dec 2, 2010

The scanner is seen using lsusb command but when i open xsane it is not recognized. Xsane wants to use the webcam instead. I think this happened because i saved the settings of the former scanner a few days ago. Should i delete that setting that is saved in the home>.sane>.xsane directory? The old scanner is a Canon Canoscan lide N1220U and the new one is a Canon Canoscan lide 100. I would appreciate any suggestions as i tried a reboot with no improvement :0)

View 2 Replies View Related

Ubuntu :: HP 2050 Printer With Scanner - Not Recognized

Mar 27, 2011

I have just bought and installed an HP 2050 printer-scanner-copier. The printer works fine, but the scanner is not recognised by Simple Scan or XSane.

Simple Scan states: No Scanners Detected

XSane Image Scanning Program states: No Devices Available

I have Ubuntu 10.10 - the Maverick Meercat installed on my computer.

I have downloaded the hplip-3.11.3a.run file from the HP website but it is still in my download folder and I don't know how to get it from the download folder to my computer and then once that is accomplished, I don't know what to type in the terminal to get this file installed.

Heck, I don't even know if this is what I should install to correct this problem or not.

View 4 Replies View Related

Hardware :: Brother Scanner Not Being Recognized In Fedora 11?

Oct 15, 2009

I have a Brother MFC-7345 Printer/Scanner and I got the printer working but the scanner won't work. I've installed all the drivers from Brother and followed all their instructions but still nothing. sane-find-scanner gives me

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

[code]....

and scanimage -L gives me No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Slackware :: Scanner Not Recognized On Epson Workforce 633 With 13.37 32-bit?

May 17, 2011

I had a similar problem on 13.1, but was solved by this forum by copying 80-sane.rules to /etc/udev/rules.d/ . With 13.37 the same trick doesn't work. Here is my scanimage output:

Code:

root@Shuttle:/home/tfrei# scanimage -L

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Here is my sane-find-scanner output:

Code:

root@Shuttle:/home/tfrei# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

[code]....

View 6 Replies View Related

Hardware :: Hauppauge WinTV PVR-150 Card Recognized As Scanner?

Jul 20, 2009

Upgraded system so I could store more recorded video. Now system identifies the Hauppauge WinTV PVR-150 card as a scanner. I have the original setup disk from Hauppauge but it is not Linux compatable. Running: Ubuntu 9.04 on: AMD Athlon64 X2 Dual Core Processor 5200+

View 11 Replies View Related

Hardware :: Multi Function Printer Scanner Not Recognized?

Jul 19, 2011

Using Ubuntu 11.04 with my Brother MFC-295cn network printer (not wireless). Printer prints, but scanner not recognized. Downloaded the following drivers and installed them using the Software Center:

mfc295cnlpr-1.1.2.i386-1.deb
mfc295cncupswrapper-1.1.2-2..i386.deb
brscan3-0.2.11-4.i386.deb
brscan-skey-0.2.1-3.i386.deb

Computer is a Gateway GT5464 dual booted with Windows 7

View 1 Replies View Related

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

Ubuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?

Dec 14, 2010

How to get this scanner to work with Ubuntu 10.10

It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.

I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.

Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...

View 3 Replies View Related

Hardware :: Using Iscan By Epson CX9300F - Could Not Send Command To Scanner - Check Scanner's Status

Mar 17, 2010

After downloading and installing iscan and run it i see this message:

Could not send command to scanner. Check scanner's status.

After command sane-find-scanner:

And this message is result of scanimage command:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Hardware :: Getting Canon 8800F Scanner Working / No Other Scanner Found?

Sep 23, 2010

Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.

I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.

lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.

and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005

but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.

My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic

View 8 Replies View Related

Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status

Apr 9, 2010

Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports

'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..

View 3 Replies View Related

Ubuntu :: XSane Image Scanner Won't Recognize Scanner?

Sep 7, 2010

I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.

View 9 Replies View Related

Debian Hardware :: Scanner HP M1319f MFP / Cant Use The Scanner?

Oct 22, 2010

my scanner used to work in lenny, now im using squeeze fresh install.

i intall hplip with synaptic in order to setup my scanner, printer is working, i dont need the fax, but the scanner is not working with xsane.

normal user and sudo see the scanner with

$ scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
$ sudo scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
code....

i know my user is in group lp and scanner root cant use the scannner either.

View 1 Replies View Related

OpenSUSE :: Scanner Won't Work / Sort It?

Aug 6, 2010

I am using Suse 11.1 on a 64-bit computer. Some time ago, I was helped on these forums to get a Brother MFC-640CW printer/scanner to work by downloading the relevant drivers from the Brother website. Although the printer works fine, when I attempt to scan something into the computer nothing happens. A pop up box appears on screen when the printer is used with an XP OS. Can anybody suggest a way to get the scanner working?

View 3 Replies View Related

OpenSUSE Hardware :: Skanlite Can't See Scanner?

Feb 24, 2010

I have a HP3500c scanner and skanlite does not see it. How do I get it or some other scanner program to work with it?

View 9 Replies View Related

OpenSUSE :: Use/setup Image-scanner On Network?

Jun 25, 2009

I have a printer/scanner/fax that's on the network. i have the printer part set up through cups but how do I set up the scanner? What programs can I use on opensuse to see the scanner?

View 9 Replies View Related

OpenSUSE Hardware :: Scanner Won't Work / Resolve This?

Feb 23, 2010

I recently have a need to get my HP ScanJet 5590 working. Never used it in suse, only in the old windoze daze. Running opensuse 11.2, kde 4.3.4 quite nicely.

When I dusted the scanner off (USB) and plugged it in and fired it up, then went into Yast, scanner, it correctly recognized the scanner by model, but the driver line has Not configured: in front of the driver info. And, it will not do a test scan, nor do any apps see the scanner. As far as I can see all the dependencies are installed, I just need to configure the scanner. But I can't find any place in Yast to do that, nor do I have a clue what command line would work.

View 5 Replies View Related

OpenSUSE Hardware :: HP OfficeJet 6110 Scanner Not Working?

Dec 18, 2009

I have a HP Office-Jet 6110 All-In-One for about 5 years now and I havve been using it on Suse and openSuse without a problem all these years. This morning I wanted to scan something and suddenly realised that the scanner is not working. I can print but not scan. i tried to set up the scanner using YaST like I have done for the past 5 years but it#s not working. Hpaio shows that no scanner is available for this driver. I can#t install the scanner. What has changed in 11.2 that devices that worked before are not working anymore?

View 7 Replies View Related

OpenSUSE Hardware :: Scanner Epson DX4450 Does Not Scan?

Jan 31, 2010

my all-in-one Epson scanner does not work. I tried to install the iscan drivers (free and/or proprietary) via repository and/or via Avasys website, but nothing happens: the scanner is not recognized. I use Gnome and openSUSE 11.2

View 3 Replies View Related

OpenSUSE Hardware :: Scanner Works But Won't Network / Solve This?

Mar 19, 2010

Fresh install of openSuSE 11.2.
Laserjet 1220 multifunction device.

Successfully installed, network driver also installed, XSane shows both local and network scanner on local machine. Scans locally via both drivers.

However, networked scanner is not discovered by machines on local network, using XSane. Did a similar installation a few months ago with openSuSE 11.0, which works fine on the same client machine.

Have tried disabling firewall, but still no joy.

So, questions:

1] Is there anything I have missed?
2] Is anything known to be broken in 11.2?

View 9 Replies View Related

OpenSUSE Hardware :: Scanner - Stopped Working After Some Update

Mar 25, 2010

Running openSUSE 11.2 with HP All-in-one 3055 printer/fax/scanner attached through network.
Using hplip package.

Printer works just fine. Scanner did work for quite some time, however it stopped working after some update about a month ago (using only opensuse update repo).

When doing hp-scan I get following error:

Checking all the logs I can think of I can't figure this one out. Tried newer hplip package fom HP site same issue (I have two systems, on one I've tried the new driver, on one only using opensuse update repo ...both same issue)

View 9 Replies View Related

OpenSUSE Hardware :: Configuring Parallel Port Scanner On 11.3

Dec 22, 2010

Just updated to Suse 11.3, in past versions, including 11.2 I could activate my Epson parallel scanner this way:

Modify this file removing the '#' form the line '#epson'
/etc/sane.d/dll.conf
Modify this file to indicate which port to use, like this:
/etc/sane.d/epson.conf
# epson.conf
# here are some examples for how to configure the EPSON backend
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
# Parallel port scanner:
#pio 0x278
pio 0x378
#pio 0x3BC

It doesn't work anymor, the parallel port is apparently active since I can do:
ls -l /dev/lp0
And I get:
-rw-r--r-- 1 root root 12 Dec 22 19:51 /dev/lp0

View 1 Replies View Related

Hardware :: A4 Flatbed Scanner For Document/images - Using Opensuse 11.3 ?

Oct 12, 2010

I wish to purchase a new A4 flatbed scanner for document/images, (using opensuse 11.3).

View 1 Replies View Related

OpenSUSE Hardware :: Scanner Hp Scanjet 3570c - Only Scan In Color

Feb 10, 2009

Whenever I try to scan documents (OpenSuse 11.1) with any of the available tools (such as scanlite, kooka, or xsane), I can only scan in color. Moreover, the result is basically unusable. I shows a turquoise background of differing intensity at various places. Why isn't there a possibility to scan black and white, grayscale, etc.? Seems like scanning still is a problem in Linux. I really don't want to have to "fall back" to M$-Windows for scanning, but that seems to be the only solution at the moment

View 8 Replies View Related

OpenSUSE Hardware :: Epson CX7800 Printer Scanner Not Detected?

Aug 2, 2010

I have an epson cx7800 printer/scanner that 11,3 doesn't detect on USB. I tried Yast-Hardware-printers and Yast-Hardware-printers and nothing is discovered/detected.

Are there repos for this stuff and is there a tutorial like the one for graphic card theory I could peruse?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved