OpenSUSE Hardware :: Scanner Won't Work / Resolve This?
Feb 23, 2010
I recently have a need to get my HP ScanJet 5590 working. Never used it in suse, only in the old windoze daze. Running opensuse 11.2, kde 4.3.4 quite nicely.
When I dusted the scanner off (USB) and plugged it in and fired it up, then went into Yast, scanner, it correctly recognized the scanner by model, but the driver line has Not configured: in front of the driver info. And, it will not do a test scan, nor do any apps see the scanner. As far as I can see all the dependencies are installed, I just need to configure the scanner. But I can't find any place in Yast to do that, nor do I have a clue what command line would work.
View 5 Replies
ADVERTISEMENT
Aug 6, 2010
I am using Suse 11.1 on a 64-bit computer. Some time ago, I was helped on these forums to get a Brother MFC-640CW printer/scanner to work by downloading the relevant drivers from the Brother website. Although the printer works fine, when I attempt to scan something into the computer nothing happens. A pop up box appears on screen when the printer is used with an XP OS. Can anybody suggest a way to get the scanner working?
View 3 Replies
View Related
Jan 7, 2011
I'm trying to get my Canon Pixma MG 5150 scanner/printer to work. While the 'printer' is doing well the 'scanner' appears to be stubborn. I use the scangearpm-MG5100series-1.60-1 driver provided by Canon which is said to be fine with Suse 11.2.
The trouble is, that though the scanner scans it does not deliver anything back. Here are the details:
When I run scangearmp as root in a terminal I get the following output:
Code:
(scangearmp:6902): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[Code]....
View 9 Replies
View Related
Jul 17, 2010
I installed openSUSE 11.3 under 2 machines, one of them using a Linksys USB wireless N adapter (rt73usb) and another using an Atheros AR5001 Wireless Network Adapter (ath5k). I have a Belkin f5D8236-4 router, with the SSID "linksys". I also have an Ubuntu 10.04 machine which has working wireless internet. I know almost nothing about networking, but from what I can tell, openSUSE 11.3 seems to have trouble with DHCP, specifically setting the dynamic IP address. To try to go about fixing this, I attempted to set a static IP, but I am quite confused by all the settings.
I have tried both the graphical "Network Manager" (KDE, Gnome, and command line versions) and ifup, both with no luck.
Here is the information from the working Ubuntu machine code...
View 1 Replies
View Related
Jul 11, 2010
I just received a Canon Pixma MX320 as a gift.
I am currently running the Ubuntu 10.04 OS
I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.
Unfortunately I am not having the same luck with the scanner.
I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.
View 2 Replies
View Related
Apr 13, 2010
I made the mistake of trying to install an nvidia graphics driver from the download.nvidia.com/opensuse11.2 repository. My card is a PCI quadro nvs 295 so looks like it should be supported. The installation and update of the kernel seemed to be successful, but for some reason sax2 doesn't seem to recognise the nvidia card, even when I run "sax2 -r -m 0=nvidia" and I'm stuck with the VESA framebuffer graphics default in /etc/X11/xorg.conf code...
I've found tons of threads on this kind of thing but I only seem to be making things worse trying to fix it. If anyone can give me a hint and fix my pathetic-looking desktop I'd be very grateful!!! At the moment nothing that uses opengl will work either
View 9 Replies
View Related
Feb 11, 2010
I've recently installed Karmic Koala (64 bit version) on my pc via a live cd.I still can't get my epson scanner to work so my plan was to get VirtualBox and then run xp inside Karmic.My problem is that my pc doesn't have an internet connection.
View 3 Replies
View Related
Nov 8, 2010
I'm trying to get a network scanner to function. I've been following the guides here:
http://ubuntuforums.org/showthread.php?t=1519201
https://help.ubuntu.com/community/ScanningHowTo
And I think I am just misunderstanding something.
1. The scanner is properly functioning on the server side.
2. Both, the client and the server, have the package sane-utils installed.
3. I changed /etc/default/saned on the server to RUN=yes (that was easy!)
4. Editing /etc/sane.d/saned.conf is what I think I'm getting confused on. The internal IP address of the server is 192.168.1.102 and the subnet mask is 255.255.255.0. The internal IP address of the client is 192.168.1.103. So, what do I put there? Is 192.168.1.0/24 correct? That didn't work!
5. Also, editing /etc/sane.d/net.conf on the client is confusing me too! What IP address should go there? Can I put the server name? What is the correct syntax?
6. I added saned to the correct group, lp. I made sure that the scanner was owned by the correct group by doing these commands:
sane-find-scanner
AND
ls -al /dev/bus/usb/XXX/XXX
The group was lp.
View 4 Replies
View Related
Mar 21, 2011
I followed the instuctions in the ubuntu forums and i got the printer to work but i cant get the scanner to work, simplescan lists the printer but when i try to scan i get an error message.
The printer is a brother MFC-8660DN. I am running Ubuntu 10.10 on a Sony Viao tower, Pentium IV 512mb ram, Nvidia 4ti graphics card.
View 1 Replies
View Related
Jul 12, 2010
Have a Brother MFC-9440CN the Scan function of which operated perfectly in Fedora 11. Have upgraded to Fedora 13, now when the Scanner Tool is activated (XSane .997) an error message is returned "Error during CMS conversion. Could Not open scanner ICM profile: (null)". Has anyone had and solved this problem, I have tried everything identified on the Brother web site. The scanner works perfectly when accessed through the Simple Scan application.
View 1 Replies
View Related
Mar 23, 2010
How to get a built in fingerprint scanner to work with linux? the device was installed on my laptop when i initially ordered it, i have a dell studio 1735 (i think its 1735) and i would like to use it with my linux. by the way im running mandriva.
View 6 Replies
View Related
Sep 27, 2010
I have a DCP 7030 multifunction printer. I have installed all proprietary drivers from Brother (printer an scanner drivers). [1] Printing works but unfortunately both Simple-scan and X-Sane do not recognize the scanner. Brother provides some scanner settings [2] - but unfortunately not for Fedora 13. I have tried the settings for Fedora 12 but they do not work. [URL]
View 1 Replies
View Related
Nov 26, 2010
I have an HP C5100 photosmart printer/copier/scanner which works fine as a printer from Linux and as a printer or scanner from a PC running Windows XP. The device is net connected not local to either box. "Sane" (installed) does not appear to support this printer (from web site) but other comments seem to imply that others have made it work using "hplip" (also installed). Nowhere do I see instructions on how to make the scanner work from Linux.
View 1 Replies
View Related
Jul 6, 2010
Could somebody recommend Scanner/Printer/Copier software that will work with Ubuntu 10.04. My Scanner is a HP PSC 2355 all-in-one.
View 2 Replies
View Related
Dec 18, 2009
HP 5610 all in one device scanner settings please. The printer works fine, I have a problem getting the Scanner to work.
I am running Ubuntu Karmic on my Dual Core Desktop PC. When I run Xsane I get the preview window showing OfficeJet 5600 Series. I also get another little error window saying "Error during CMS conversion:Could not open Scanner ICM profile". It seems like Xsane recognises my HP 5610 All in One Printer/Scanner/Fax/Copier device but what is the error all about?
View 5 Replies
View Related
Aug 15, 2010
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies
View Related
Dec 14, 2010
How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
View 3 Replies
View Related
Mar 17, 2010
After downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
View 4 Replies
View Related
Jan 24, 2010
I have not been able to get my Epson Perfection V100 scanner to work with Lenny. The correct driver files have been downloaded from Avasys and installed.
View 2 Replies
View Related
May 3, 2010
I switched from Sidux to Ubunbtu Lucid yesterday. On Sidux I had to struggle a little but to get this scanner working but at the end everything was fine. However on Lucid no success, I googled around and followed different instructions found in the www. sane-find-scanner and scanimage -L can find it (but it takes some time for scanimage -L) however I cannot scan and the scanner also does not react at all. The reaction of iscan and all the other scanning software is not consistent, error messages vary. A am thinking about switching back to some older Ubuntu version in case that I cannot get it running, I need the scanner in order to send fax
View 5 Replies
View Related
Sep 23, 2010
Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.
I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.
lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.
and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005
but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.
My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic
View 8 Replies
View Related
Apr 9, 2010
Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports
'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..
View 3 Replies
View Related
Mar 21, 2010
After I solved the issue about printer, now I'm struggling to make the integrated scanner of lexmark S305 work with debian.The device is connected to the network through integrated wifi connection (it is NOT connected with usb to a host, which act as a server), but I don't know how xsane can recognize it.I have just added the ip address in /etc/sane.d/net.conf, but it doesn't work at all. I read some tutorials on how to configure a network scanner, but they are all related to a scanner connected to a computer through usb, and then shared on the network by this computer.The second issue (probably more important) is that xsane probably doesn't recognize even with usb connection the scanner. The latter is not listed in the supported scanner list. Indeed connecting by usb to my laptop, it doesn't work. I haven't found any driver for it, but probably it could work with driver of other scanners.
View 1 Replies
View Related
Sep 7, 2010
I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.
View 9 Replies
View Related
Oct 22, 2010
my scanner used to work in lenny, now im using squeeze fresh install.
i intall hplip with synaptic in order to setup my scanner, printer is working, i dont need the fax, but the scanner is not working with xsane.
normal user and sudo see the scanner with
$ scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
$ sudo scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
code....
i know my user is in group lp and scanner root cant use the scannner either.
View 1 Replies
View Related
Mar 9, 2010
I just installed the TV-Fox add-on for Firefox (https://addons.mozilla.org/en-US/firefox/addon/11200), but it doesn't seem to work. When I choose a Channel all it does is load for ages, saying 'waiting for video'. Are there any additional packages that need to be installed for this to work, or is it just not working in general?
View 6 Replies
View Related
Jun 23, 2010
I got this problem that i can't enable 5.1 and i can't get microphone to work
i know the onbord has 5.1 and working mic input from windows but i wanner use ubuntu more and more and i kinda need those things
the sounds is working atm but only 2 front speakers
the mic aint wokring at all
I'm useing ubuntu 10.04 everything is updated code...
View 1 Replies
View Related
Jul 28, 2010
I've been trying to get my built-in webcam to work for the past few hours and am completely stuck... Apparently I need a driver called uvcvideo, but I cant find it anywhere (its repos have been removed). I have installed Cheese and Camorama, neither of which work. Camorama throws this error when launched - "Could not connect to video device /dev/video0). Please check connection. Cheese launches, turns camera light on, shows a black screen for ~1 sec then closes.
The only way I can get the webcam to work is with a program called "guvcview" (light turns on and I can see preview), that's why I'm thinking I need the uvcvideo driver.
I've found various posts on how to install the uvcvideo driver, but I get an error on all its reposotory links - "reposotory not found". I also can't figure out how to install the EasyCam program, yet another repository error.
Does anyone know how to get built-in webcams working? I suspect it is due to my lack of driver, but I could be wrong. Lsusb detects the webcam as a Chicony Electronics Co. LTD Gateway USB 2.0 Webcam, so the kernel detects it, just no apps.
View 3 Replies
View Related
Aug 29, 2010
I remember that in the past, I succeed to sniff network traffic with Wireshark but when I tried lately, it didn't work.
- Enabled monitor and promisc mode using the command line and launched Wireshark with option 'promisc mode' on: didn't work.
- Directly launched Wireshark with option 'promisc mode' on: didn't work.
- Did the both previous things with option 'promisc mode' off: didn't work.
I'm using AR5007EG with ath5k.
View 2 Replies
View Related
Nov 3, 2010
I'm having some pulseaudio weirdness. Up until this evening, my built-in microphone worked fine with skype, google voice, etc.Tonight while talking on google voice, I made the mistake of trying to adjust the microphone volume at the same time.Suddenly the volume cut down to a tiny, tinny little sound.Now I can't get the microphone to work normally again. Some weird facts:
1) the built-in microphone still works fine in audacity and gnome-sound-recorder
2) the built-in microphone still works in Windows
3) the built-in microphone shows sound input in the pulseaudio applet->Volume Meter [code]....
View 2 Replies
View Related
