OpenSUSE Hardware :: Scanner Works But Won't Network / Solve This?
Mar 19, 2010
Fresh install of openSuSE 11.2.
Laserjet 1220 multifunction device.
Successfully installed, network driver also installed, XSane shows both local and network scanner on local machine. Scans locally via both drivers.
However, networked scanner is not discovered by machines on local network, using XSane. Did a similar installation a few months ago with openSuSE 11.0, which works fine on the same client machine.
Have tried disabling firewall, but still no joy.
So, questions:
1] Is there anything I have missed?
2] Is anything known to be broken in 11.2?
View 9 Replies
ADVERTISEMENT
Jun 1, 2011
I have an epson stylus sx425w which is a printer/scanner. ubuntu found and installed a driver for me and im able to use the printer fine but for some reason the scanner just isnt working. if i use the simple scan software it says connect a printer and if i press the scan button on the printer and select usb it says connection problem.
i saw a post about this already for ubuntu 10 or 9 and they provided a link for a newly released driver which turned out to be the drive ubuntu installed automatically and that hasnt fixed my problem.
anyone know what the cause could be and how to fix it?
View 1 Replies
View Related
Dec 31, 2009
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies
View Related
Oct 19, 2010
I'm not sure what I did if anything but I have not used my opensuse for several months. Now when I try to connect to the Internet I can not pull any websites. The wireless connection is active and connected. I am getting an IP address via dhcp. When I try and ping out (opensuse.org) I get unknown host. If I ping an IP address or type the IP in my browser it works fine. nslookup works but only if I specify the dns server.
Here is a copy of my troubleshooting commands.code...
View 7 Replies
View Related
Jun 25, 2009
I have a printer/scanner/fax that's on the network. i have the printer part set up through cups but how do I set up the scanner? What programs can I use on opensuse to see the scanner?
View 9 Replies
View Related
Apr 30, 2011
I have just upgraded to 11.04 from 10.10 and my wireless no longer works, the laptop is a dell inspirion 1501.
View 2 Replies
View Related
Mar 18, 2011
I have installed the c2esp driver for the printer part of my AIO. I am unable to find any scanner drivers that works. Does any one know of any drivers that will work?
View 3 Replies
View Related
Jul 11, 2010
I just received a Canon Pixma MX320 as a gift.
I am currently running the Ubuntu 10.04 OS
I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.
Unfortunately I am not having the same luck with the scanner.
I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.
View 2 Replies
View Related
May 4, 2011
My webcam works at my end but two people have said they can't see me their end using skype. They webcam with other people so i know it is not their settings or anything. One has a mac and the other a windows machine. I really don't have anyone else to test this with as most people i know don't have webcams.
View 9 Replies
View Related
Mar 6, 2010
my problem is that the wired internet is working on and off, or not even that, only when it wants too. I have googled and googled, which by the way is not loading at all at the moment, and have not found anything. And i really don't know what's wrong. Some more details: 1) Finished installing suse 11.2 with gnome, yesterday. Internet, and google worked fine right off the bat. I have a laptop and so i suspended it to see if everything was working. 2) Bring back the laptop, no internet. I reboot, internet works (google included). 3) I leave the laptop alone, it goes to sleep mode (or what comes after screensaver).
I bring it back, no internet, i reboot, no internet. So i go to windows. 4) Came back to suse, now, and i have internet and google does not load! This is all with wired internet, i haven't had a chance to try the wireless (there isn't a signal for me to try). However, i am positive it won't work with the luck i've been having. Also, a few days ago i had suse with kde and the internet worked continously. I know it can't be related to the GUI, but it's peculiar.
View 9 Replies
View Related
Mar 27, 2011
I mount my NFS shares with fstab entries likexxxx.xxxx.xx:/srv/vdr /media/vdr_video nfs noauto,user,bg,soft,intr,retry=5 0 0 With openSUSE 11.2 works this fine. With openSUSE 11.4 installation (no upgrade) only NFS mount works fine. The umount command works only with root.
View 9 Replies
View Related
May 9, 2010
using konqueror/dolphin to connect to my desktop and the connection is okay.fish://userone@192.168.1.101:12345 out of curiosity, in konsole typedssh userone@192.168.1.101:12345 and got and error messagessh: Could not resolve hostname 192.168.1.101:12345: Name or service not known Googled and got more confused
View 6 Replies
View Related
Apr 12, 2011
I installed OpenSUSE11.4 yesterday.The dual boot option works.The wireless works in win 7 but I cannot get it enabled in SUSE.Is there a reason why the keyboard keys will not work to enable the wireless.I have an acer laptop.
View 3 Replies
View Related
Mar 30, 2010
On my Acer netbook (AOA-150-1635) the wireless works fine with WinXP, Ubuntu, and used to work with Suse 11.1. I replaced the Suse 11.1 with a clean network install of Suse 11.2. I couldn't get the wireless to work and did another network install using the wireless. When the install was completed I could not get the wireless to work with Suse 11.2. When I run the "collectNWData.sh" it shows--
!!! CND0120E: Network card wlan0 has no IP address
wlan0 Interface doesn't support scanning : Network is down
[code].....
I looked up error CD0120E and changed the network devices setup to "traditional". The wireless "scan" picked up the routers and I added the encryption keys. Still no joy. I ran "collectNWData.sh" again and it said it is better to use the Network Manager.
!!! CND0180I: The system can't ping external IP address 195.135.220.3
!!! CND0150E: There might be a problem with the default gateway definition 10.1.1.1 on interface eth0
[code]....
Going back to Yast, Network Devices, I set Network Manager. The result is that it is back to the beginning with "collectNWData.sh" giving the original error.
View 9 Replies
View Related
Sep 2, 2011
I am unable to connect to a WEP-protected network. the Network manager log shows either a DHCP timeout, or a failure to associate. (attached below).Changing to WPA is not an option, as the network is not controlled by me. This is with the rt61pci driver for a Ralink 2500 series chipset.(Rosewill RNX-G300EX card)Manually forcing an IP does not result in a connection either. This is with the latest OpenSuSE 11.4, all patches applied. Router is a D-Link DIR-613, and I know the passphrase I'm using is correct because it connects both on my Android (what else?) phone, and my lappy when I boot XP.
Sep 2 11:12:02 Core2Duo-2400 NetworkManager[2160]: <info> (wlan0): supplicant connection state: associating -> associated
Sep 2 11:12:02 Core2Duo-2400 NetworkManager[2160]: <info> (wlan0): supplicant connection
[code]....
View 7 Replies
View Related
Feb 19, 2010
I tried to set up my internet connection using the network manager and not the classic iufp method. At first it just didn't work but after deactivating IPv6 I got it working: firefox can connect to the internet. What troubles me is the online update with Update Applet. The following message pops up: "Error: packageKit error repo-not-available: Failed to download /media fromAlso when I go to Yast->Software->Software repositories I get the msg:Systemadministration is blocked by PID 2459 (/usr/sbin/packagekitd). Close the application and try again.Using the command "sudo zypper refresh"eates the same message.I spent already hours trying to figure out the problem without luck
View 3 Replies
View Related
May 30, 2011
Originally after an installation of openSUSE 11.4, I had no internet connection at all, even when connecting with ethernet cable. But then I tried switching back to YaST and then back to Network Manager, and restarted a couple times, and now I have internet connection. DNS is also working, for Ping. The problem is that firefox does not use DNS and cannot resolve host names. I can use Firefox with IP numbers.
View 3 Replies
View Related
Feb 22, 2010
I'm using 11.2 with KDE.
I can connect to the Internet on my WLAN just fine (using Opera) and can dload torrent files (using the same).
However, I have had trouble accessing some community repositories in the past, cannot synchronise with an NTP server (annoying since my battery is low and time and date are reset most reboots) and cannot use the lyrics function or Wikipedia function in Amarok. Nor can I connect to the net using Firefox (though conqueror works just fine...) I cannot download torrents on KTorrent either.
It seems that there is some sort of 'permission'/connectivity issue.
View 8 Replies
View Related
Mar 30, 2011
I'm not able to connect to my university's internet facilities under openSUSE 11.4. I have been able to connect in the past and I am still able to connect in Windows 7.When I try to connect to the university WiFi, a valid IP address is assigned to me and the gateway address appears to be correct, so I don't see a problem in the DHCP negotations. Same with my university's Ethernet: I get a valid IP address, but I can't connect to the internet.When I browse to any site with Chromium/Chrome/ Firefox/lynx/curl, the page is stuck at "Sending request". I have tried disabling my firewall - that didn't solve anything.I don't know what else I can try and the campus' network administrators are puzzled. How can I resolve my issue?
View 7 Replies
View Related
Jan 20, 2010
I have x11 forwarding enabled in /etc/ssh/sshd_config on a suse 11.2 32 bit box running kde I can open x apps on a windows machine using xming and putty just fine, but when I boot the same machine into suse 11.2 64 bit using kde and try using konsole I get: cannot connect to x server
The command I'm using to log in is: ssh -X -l username host I doubt the problem is with the server I'm logging into or it wouldn't work in windows, not really sure what to look for as I've never had a problem using x11 forwarding from a linux client before only windows ones
View 7 Replies
View Related
Nov 7, 2010
I have done a fresh install of the OS and I am having wifi trouble. I am failing in connecting to an access point that Windows works fine with on the same machine. As far as I can tell it is connecting but not getting an IP address via DHCP. when running ifup it says its backgrounding getting an ip address.
View 9 Replies
View Related
Nov 8, 2010
I'm trying to get a network scanner to function. I've been following the guides here:
http://ubuntuforums.org/showthread.php?t=1519201
https://help.ubuntu.com/community/ScanningHowTo
And I think I am just misunderstanding something.
1. The scanner is properly functioning on the server side.
2. Both, the client and the server, have the package sane-utils installed.
3. I changed /etc/default/saned on the server to RUN=yes (that was easy!)
4. Editing /etc/sane.d/saned.conf is what I think I'm getting confused on. The internal IP address of the server is 192.168.1.102 and the subnet mask is 255.255.255.0. The internal IP address of the client is 192.168.1.103. So, what do I put there? Is 192.168.1.0/24 correct? That didn't work!
5. Also, editing /etc/sane.d/net.conf on the client is confusing me too! What IP address should go there? Can I put the server name? What is the correct syntax?
6. I added saned to the correct group, lp. I made sure that the scanner was owned by the correct group by doing these commands:
sane-find-scanner
AND
ls -al /dev/bus/usb/XXX/XXX
The group was lp.
View 4 Replies
View Related
Oct 28, 2010
I have a multi-function printer/scanner that plugs straight into the LAN via RJ45. Printing works fine, but I'm not sure how to proceed to set up the scanner. Just to be clear, I am not asking about connecting a usb scanner then sharing it over a LAN, that's different. This scanner plugs straight into the LAN.
View 5 Replies
View Related
Feb 5, 2009
I currently have a network with an older machine, which is (usually) operated in headless mode as a data & backup server, with a fixed IP of 192.168.0.10. I have two client machines, a desktop & a laptop, which use DHCP. All three computers are running Slackware-12.2, the clients with a full install & the server without any X components. I want to set the server to serve a scanner & have been following this link, which is mostly a rewrite of the man page for sane.d. I set up saned per the article, adding the saned:saned user. 'scanimage -L' works for both root & my local user on the server. I can ssh into the server as my desktop user & 'scanimage -L' works. Ditto if I ssh into the server, then 'su -' to root. I can scan either locally from the server or via ssh from the desktop machine. BUT, I cannot get the scanner recognized on the network. On the server, I have this line in /etc/sane.d/saned.conf:
Code:
192.168.0.0/24 this line in /etc/services:
Code:
sane-port 6566/tcp #SANE network scanner daemon & this line in /etc/inetc.conf:
Code:
sane-port stream tcp nowait saned:saned /usr/sbin/saned saned
I have changed the line in /etc/sane.d/saned.conf to just "+", for testing. That didn't work either. On the clients, I have these two uncommented lines in /etc/sane.d/net.conf:
[code]....
My server user is in the same groups, less vboxusers. The server is identified in /etc/hosts & I can connect to it via ssh & mount nfs shares from it. What am I (not) doing that is killing network scanning?
View 3 Replies
View Related
Aug 15, 2010
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies
View Related
Dec 14, 2010
How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
View 3 Replies
View Related
Mar 17, 2010
After downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
View 4 Replies
View Related
Sep 23, 2010
Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.
I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.
lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.
and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005
but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.
My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic
View 8 Replies
View Related
Apr 29, 2010
I have a debian server (squeezzy) amd 64, running with an epson BX-300f pluged to USB. And I want to share the scanner over my network. So let's do that, Intalled sane, sane utils, iscan, which I've downloaded from epson drivers and wich include epkowa drivers fro scanner to work..
after that I installed on my system (Ubuntu 9.10) xsane... on console I type:
root@bruno-laptop:/home/bruno# scanimage -L
*** glibc detected *** scanimage: free(): invalid pointer: 0x00be63d0 ***
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device 'v4l:/dev/video0' is a Noname HP Webcam virtual device
device 'net:192.168.0.254:gt68xx:libusb:001:035' is a unknown manufacturer unknown device -- use override to select flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner
I don't know why I find so much things, if i only have one scanner. Then I opened xsane and found the scanner over network. I chose the epson with epkowa drivers I try to scan something but it dont output nothing and sometimes it gives me "end of file reached". I can put whatever config files here if you want to, just ask. One time it worked fine.. but only half of an image...
View 1 Replies
View Related
Jun 27, 2010
Assumptions:
Your scanner is installed properly and fully function. If you need to install your scanner first, have a look at the ScanningHowTo. To check if your scanner is connected and installed properly you can use the command "scanimage -L".
The machine we're configuring to use as the scanner server has the ip address 192.168.1.1 and subnet-mask 255.255.255.0. This means that this machine is on the 192.168.1.0/24 (CIDR notation) network/subnet. code...
View 9 Replies
View Related
