Hardware :: Hauppauge WinTV PVR-150 Card Recognized As Scanner?
Jul 20, 2009
Upgraded system so I could store more recorded video. Now system identifies the Hauppauge WinTV PVR-150 card as a scanner. I have the original setup disk from Hauppauge but it is not Linux compatable. Running: Ubuntu 9.04 on: AMD Athlon64 X2 Dual Core Processor 5200+
View 11 Replies
ADVERTISEMENT
Sep 4, 2010
I am trying to install a Hauppauge 1850 video card into Linux Home automation system (LinuxMCE) which is based on Ubuntu Intrepid (I can't upgrade the kernel since this is what the LinuxMCE distribution supports)I am feeding analog signal to the video card, either through a coax analog connection or an RCA analog connection. I cannot see any picture from the card (I verified that the video card is working properly under a Windows Vista OS)I am trying to use the video card using a lightweight application such as tvtime, xawtv. In all applications I am failing to see an image. (For example, tvtime shows the message "No inputs avialble Cannot open capture device /dev/video0". Right clicking on Input configuration / Change video source doesn't give any options)
View 9 Replies
View Related
Jan 11, 2010
I can not get my usb dvb-t sick working. It is a hauppauge WinTV-HVR 900 hybrid TV stick.
The number on the backside is: M/R: 65018/BC20 Some time ago I read somewhere that this model was supposed to work with ubuntu 9.10. [URL] it is possible to make it work since the poster appears to be using the same model as I do.But I still have trouble setting it up.
View 1 Replies
View Related
Apr 12, 2011
I just put Hauppauge WinTV-HVR2200 device to my system, however I can't get it working
Code:
$ lspci -s 03:00 -vvv
03:00.0 Multimedia controller: Philips Semiconductors Device 7164 (rev 81)
Subsystem: Hauppauge computer works Inc. Device 8900
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[code]...
View 4 Replies
View Related
Jun 27, 2010
I bought this tv card because it was listed as working 'out-of-the-box'. Well, it didn't for me. I've googled and forummed for 3 days, tried all the fixes and nothing works.
View 1 Replies
View Related
Aug 7, 2011
I am having problems with Natty AMD64 (Ubuntu 11.04) and LIRC/IR-Keytables.
I have a Hauppauge WinTV card (Bt87 (TV card and IR receiver/transmitter) that worked (for the first time) automatically with 10.10 and LIRC. I recently moved over to 11.04, copied my LIRC config files over (hardware.conf, lircd.conf, lircmd.conf, etc), and received the error couldn't find any node at /sys/class/rc/rc*
The modules I had previously been successful with were: lirc_dev & lirc_i2c, as is apropriate for my speific card.
I then learned that Natty incorporated a lot of RC elements in to the kernel, and tried following:[url]
Which suggested removing lirc. At this point, ir-keytable also gives the same error about no node at /sys/class/rc/rc*
I think that I am having a problem with the correct driver being loaded for my card. When I look at a dmesg, the relevant section is: (note: I'm not sure if this dmesg was from before or after I uninstalled LIRC and just tried keytables)
Code:
The 3rd last line makes it seem that the IR capabilities have been recognized further confusing me as to why no /sys/class/rc/rc* has been registered. I've attached an unedited copy of my proc/bus/pci/devices, and below is my lsmod.
Code:
View 1 Replies
View Related
Aug 15, 2010
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies
View Related
Feb 13, 2010
After some difficulties I succeeded to run this TV card under SUSE 11.1 with kaffeine 0.8.8.Everything works fine except for that the card refuses to tune on a DVB-S2 transponder. (For Example TP 11 on Astra 19.2E)The terminal output looks like this:
Tuning to: Das Erste HD / autocount: 1
Using DVB device 0:0 "Conexant CX24116/CX24118"
tuning DVB-S to 11362000 h 22000000
[code]....
View 1 Replies
View Related
Feb 7, 2010
How do I install WinTv pvr-250 (Tv-card) on my ubuntu 9.10 Karmic Koala? I am new to linux and not quite sure to begin. I would like to be able to use it to watch TV on my computer, using VLC, mythTV or similar.
View 3 Replies
View Related
Sep 11, 2010
I'm running 10.04 64-bit with all stable and pre-release upgrades enabled in a Dell 4-core Inspiron with 8 GB of memory. I just bought a Hauppage WinTV-HVR 1600 and it's detected in the boot process and all firmware is loaded, but then it goes bonkers and spews
[ 24.421795] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-dig.fw
[ 24.612289] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 24.632510] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
[code]....
over and over again. All the info on the Hauppage site and LinuxTV is very obsolete. MythTV initializes, but can't find any channels on either the analog or digital streams.
View 7 Replies
View Related
Dec 18, 2010
This is a writeup to help you enable your Hauppauge 1250 tv tuner card so you can use it with programs such as Mythtv. This will enable multiple cards. I am assuming your card isn't working "out of the box". You can check if it is recognized in the OS by following the instructions in "How to tell if the TV card is recognized" below.
In linux land, the 1250 is not just a 1250 but can be a variety of designations. I own older 1250's which are listed as 1270's. My newer cards are listed as 1255's. These cards usually don't work "out of the box" with linux. You have learn the ropes and enable them yourself. You have to have time on your hands and be a glutton for punishment when it comes to setting up linux but a stable, well running system is worth it. If you need everything done for you and want it "out of the box", you might as well ride back to Bill Gates' Boneless Chicken Ranch.
First off, here is an updated cardlist for the cx23885 driver that is used with the 1250 amongst other tuner cards:
[Code]...
View 9 Replies
View Related
Nov 8, 2010
I have an old Fisher VHS player with the old 'antenna' connection [one wire] to the TV. It does still work. I connect this to an old Hauppauge 250 pvr card in a box running Ubuntu 10-10.
I want to be able to put old tapes on my disk drive.
Working mainly with MythTv, I can not get it to work. The hardware seems to be working as I have options for tuner1 and other inputs. As channel 4 is no longer 'broadcast' I can't scan for it even with the VCR running.
Would someone please hold my hand an provide the necessary steps to get MythTv working or an alternative.
I have read the five similar threads and numerous other google hits but can't find what I need. Part of my problem is I am also new to Ubuntu and jumping in an out of terminal sessions is no where near what I grew up with in Slackware.
View 2 Replies
View Related
Mar 4, 2010
I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.
I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.
Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.
The printing side of things works fine but I can't get the scanner recognized by Xsane.......
View 5 Replies
View Related
Nov 30, 2015
I am running Wheezy 7.9 32 bit, with the kernel Linux 3.2.0-4-686-pae, and Gnome 3.4.2 on an Intel Pentium CPU G3420 @ 3.2 GHz. I installed a new printer in August, an HP Officejet 7612 all-in-one printer/scanner/copier, and it worked perfectly as both a printer and a scanner first time, despite not being listed on the supported list in SANE. Two weeks ago, I got a general software update notification, and did the update. Now the scanner is not recognised. The printer still works fine as a printer, but when using Simple-scan, I get the error message "No scanners detected. Please check your scanner is connected and powered on". I have had a look round on Google, and all the suggestions made do not work.
I tried the suggestion to add myself to the scanner users list on my PC which made no difference (even though the scanner previously worked without my being added to the scanner users list).
I have deleted the printer and re-installed it using CUPS, but that still has no effect. I tried re-installing HPLIP also to no avail, and I have now lost the toolbox on the drop down menu under <Applications> <Accessories> <HP Toolbox>, as when I click on it, nothing happens.
It would seem that something in the update has messed up Simple-scan. Looking at the dpkg log (is this the right thing to look at?) for the date of the update, I cannot find anything which directly involved SANE, so I think that it might be something else which has affected SANE. How I can find out which update did the damage? I don't normally do anything except accept recommended updates, so I am a bit lost as to what to do.
View 2 Replies
View Related
Jan 4, 2011
I have purchased an HP 2050 all in one Printer Scanner. The Printer works fine but so far I am unable to get the scanner recognized.
View 14 Replies
View Related
Nov 15, 2010
I have a Bearpaw 1200CU scanner that is not recognized by Yast, so I cannot use XSane to scan my images. Is there anyway to get the driver?
View 2 Replies
View Related
Dec 2, 2010
The scanner is seen using lsusb command but when i open xsane it is not recognized. Xsane wants to use the webcam instead. I think this happened because i saved the settings of the former scanner a few days ago. Should i delete that setting that is saved in the home>.sane>.xsane directory? The old scanner is a Canon Canoscan lide N1220U and the new one is a Canon Canoscan lide 100. I would appreciate any suggestions as i tried a reboot with no improvement :0)
View 2 Replies
View Related
Mar 27, 2011
I have just bought and installed an HP 2050 printer-scanner-copier. The printer works fine, but the scanner is not recognised by Simple Scan or XSane.
Simple Scan states: No Scanners Detected
XSane Image Scanning Program states: No Devices Available
I have Ubuntu 10.10 - the Maverick Meercat installed on my computer.
I have downloaded the hplip-3.11.3a.run file from the HP website but it is still in my download folder and I don't know how to get it from the download folder to my computer and then once that is accomplished, I don't know what to type in the terminal to get this file installed.
Heck, I don't even know if this is what I should install to correct this problem or not.
View 4 Replies
View Related
Oct 15, 2009
I have a Brother MFC-7345 Printer/Scanner and I got the printer working but the scanner won't work. I've installed all the drivers from Brother and followed all their instructions but still nothing. sane-find-scanner gives me
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
[code]....
and scanimage -L gives me No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). read the documentation which came with this software (README, FAQ, manpages).
View 4 Replies
View Related
May 17, 2011
I had a similar problem on 13.1, but was solved by this forum by copying 80-sane.rules to /etc/udev/rules.d/ . With 13.37 the same trick doesn't work. Here is my scanimage output:
Code:
root@Shuttle:/home/tfrei# scanimage -L
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Here is my sane-find-scanner output:
Code:
root@Shuttle:/home/tfrei# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
[code]....
View 6 Replies
View Related
Jul 19, 2011
Using Ubuntu 11.04 with my Brother MFC-295cn network printer (not wireless). Printer prints, but scanner not recognized. Downloaded the following drivers and installed them using the Software Center:
mfc295cnlpr-1.1.2.i386-1.deb
mfc295cncupswrapper-1.1.2-2..i386.deb
brscan3-0.2.11-4.i386.deb
brscan-skey-0.2.1-3.i386.deb
Computer is a Gateway GT5464 dual booted with Windows 7
View 1 Replies
View Related
Jun 2, 2010
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies
View Related
Jul 11, 2010
I just received a Canon Pixma MX320 as a gift.
I am currently running the Ubuntu 10.04 OS
I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.
Unfortunately I am not having the same luck with the scanner.
I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.
View 2 Replies
View Related
May 7, 2010
Using xsane with HP scanjet 3970 scanner. It used to be that when I plugged the scanner in and started the xsane a window would come up asking if I wanted to use my HP scanner or my Hauppauge video card. Well, that window no longer comes up and the Xsane wants to use my video card. When I try to "scan" the program closes and all the windows associated with it disappear.
View 1 Replies
View Related
Nov 23, 2009
why my sd card is not recognised (not mounted) when I insert it into the sd card slot...neither if it is already inserted at bootup nor if it is inserted afterwards? I am running Opensuse 11.2 (with KDE4), and I have no reason to suspect the hardware (yet), since it was OK recently with OS 11.1.
[code]....
View 6 Replies
View Related
Apr 9, 2010
I am very new to Linux. I installed ubuntu 9.10 on my Acer 3050 aspire. It works very well except for a few issues. I can not use my 5 in 1 card reader, nothing shows up in "computer" except "cd/dvd" and "file system". My lg phone does not show up when using my data cable as mass storage, and the touch pad is too sensitive, (i have adjusted the settings listed under mouse/touchpad but to no avail. The biggest problems is the card reader and phone. Can this be fixed?
View 14 Replies
View Related
Mar 3, 2011
I have a Mini-ITX VIA EPIA LT series motherboard running Slackware 13.1
Graphics card is not recognized properly.
But the graphics is OK the first half of the boot, then it turns weird and stays that way.
The screen is very dark, tux in the upperhand left corner is colored wrong. (Red, Purple, Green)
I did a Xorg -configure, and this is the content of xorg.conf.new:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 14 Replies
View Related
Aug 11, 2010
I just closed another issue about an unrecognized USB C-Media headset, because the issue seems to be deeper... On an Asus Eee 1001p running Fedora 13, I've run lspci | grep -c audio, which returns 0.
Running alsa-info.sh --no-upload I get a report that tells me that there are no soundcards... Pulseaudio is running though. Also, if I use VirtualBox the sound works fine there (including my USB headset).
I used to have sound, and I'm not sure how it disappeared. I really don't know where to start with this, it's been a pain in the ass all week.
View 3 Replies
View Related
Mar 26, 2011
How can I get Suse 11.4 to see my wireless adaptor? Would love to get this working so I don't have to upgrade my old XP OS to Win 7.
linux@linux:~> /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: i915 .....
View 9 Replies
View Related
Jan 18, 2010
my TV capture card wont even get recognizedit my Windows machine it works finebut here in Ubuntu 9.10 it does nothingit i an older WinTv 150 non-PVRit has the 878 chipset
View 4 Replies
View Related