OpenSUSE :: Scanner Won't Work / Sort It?

Aug 6, 2010

I am using Suse 11.1 on a 64-bit computer. Some time ago, I was helped on these forums to get a Brother MFC-640CW printer/scanner to work by downloading the relevant drivers from the Brother website. Although the printer works fine, when I attempt to scan something into the computer nothing happens. A pop up box appears on screen when the printer is used with an XP OS. Can anybody suggest a way to get the scanner working?

View 3 Replies


ADVERTISEMENT

Software :: HP Scanner Software Won't Work With Wine / Sort It?

Nov 25, 2010

My HP Scanjet 4370 software using WINE reports that the hardware is not connected. The hardware connects through a USB port. When the scanner is connected and turned on and linux is booted it runs the scanner mechanism back and forth at one point during the boot, so there is communication. It works fine using Windows plus I have many other windows programs that run very well using WINE. Any ideas?

View 4 Replies View Related

OpenSUSE Hardware :: Scanner Won't Work / Resolve This?

Feb 23, 2010

I recently have a need to get my HP ScanJet 5590 working. Never used it in suse, only in the old windoze daze. Running opensuse 11.2, kde 4.3.4 quite nicely.

When I dusted the scanner off (USB) and plugged it in and fired it up, then went into Yast, scanner, it correctly recognized the scanner by model, but the driver line has Not configured: in front of the driver info. And, it will not do a test scan, nor do any apps see the scanner. As far as I can see all the dependencies are installed, I just need to configure the scanner. But I can't find any place in Yast to do that, nor do I have a clue what command line would work.

View 5 Replies View Related

OpenSUSE Install :: 11.3: Can't Get Canon Pixma MG 5150 Scanner To Work

Jan 7, 2011

I'm trying to get my Canon Pixma MG 5150 scanner/printer to work. While the 'printer' is doing well the 'scanner' appears to be stubborn. I use the scangearpm-MG5100series-1.60-1 driver provided by Canon which is said to be fine with Suse 11.2.

The trouble is, that though the scanner scans it does not deliver anything back. Here are the details:

When I run scangearmp as root in a terminal I get the following output:

Code:
(scangearmp:6902): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

[Code]....

View 9 Replies View Related

Ubuntu :: New Scanner Not Recognized By Xsane / Sort It?

Dec 2, 2010

The scanner is seen using lsusb command but when i open xsane it is not recognized. Xsane wants to use the webcam instead. I think this happened because i saved the settings of the former scanner a few days ago. Should i delete that setting that is saved in the home>.sane>.xsane directory? The old scanner is a Canon Canoscan lide N1220U and the new one is a Canon Canoscan lide 100. I would appreciate any suggestions as i tried a reboot with no improvement :0)

View 2 Replies View Related

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

OpenSUSE Multimedia :: Latest Phonon Doesn't Work With Pulseaudio / Sort It?

Mar 18, 2010

After update to latest phonon (4.4.0-37) - with kde 4.4.1., it doesn't recognize pulseaudio anymore. I am using xine backend, but I can't find 'PulseAudio Server' device entry in phonon configuration

Is there special pulseaudio configuration so phonon will regonize it? code...

View 9 Replies View Related

Ubuntu :: Can't Get Epson Scanner To Work

Feb 11, 2010

I've recently installed Karmic Koala (64 bit version) on my pc via a live cd.I still can't get my epson scanner to work so my plan was to get VirtualBox and then run xp inside Karmic.My problem is that my pc doesn't have an internet connection.

View 3 Replies View Related

Ubuntu :: Can Not Get A Network Scanner To Work / What To Do?

Nov 8, 2010

I'm trying to get a network scanner to function. I've been following the guides here:

http://ubuntuforums.org/showthread.php?t=1519201
https://help.ubuntu.com/community/ScanningHowTo

And I think I am just misunderstanding something.

1. The scanner is properly functioning on the server side.

2. Both, the client and the server, have the package sane-utils installed.

3. I changed /etc/default/saned on the server to RUN=yes (that was easy!)

4. Editing /etc/sane.d/saned.conf is what I think I'm getting confused on. The internal IP address of the server is 192.168.1.102 and the subnet mask is 255.255.255.0. The internal IP address of the client is 192.168.1.103. So, what do I put there? Is 192.168.1.0/24 correct? That didn't work!

5. Also, editing /etc/sane.d/net.conf on the client is confusing me too! What IP address should go there? Can I put the server name? What is the correct syntax?

6. I added saned to the correct group, lp. I made sure that the scanner was owned by the correct group by doing these commands:
sane-find-scanner
AND
ls -al /dev/bus/usb/XXX/XXX
The group was lp.

View 4 Replies View Related

Ubuntu :: Cant Get Mfc 8660dn Scanner To Work

Mar 21, 2011

I followed the instuctions in the ubuntu forums and i got the printer to work but i cant get the scanner to work, simplescan lists the printer but when i try to scan i get an error message.

The printer is a brother MFC-8660DN. I am running Ubuntu 10.10 on a Sony Viao tower, Pentium IV 512mb ram, Nvidia 4ti graphics card.

View 1 Replies View Related

Fedora Installation :: Brother Scanner Won't Work In 13

Jul 12, 2010

Have a Brother MFC-9440CN the Scan function of which operated perfectly in Fedora 11. Have upgraded to Fedora 13, now when the Scanner Tool is activated (XSane .997) an error message is returned "Error during CMS conversion. Could Not open scanner ICM profile: (null)". Has anyone had and solved this problem, I have tried everything identified on the Brother web site. The scanner works perfectly when accessed through the Simple Scan application.

View 1 Replies View Related

General :: Built In Fingerprint Scanner To Work

Mar 23, 2010

How to get a built in fingerprint scanner to work with linux? the device was installed on my laptop when i initially ordered it, i have a dell studio 1735 (i think its 1735) and i would like to use it with my linux. by the way im running mandriva.

View 6 Replies View Related

Fedora Hardware :: Brother DCP 7030 - Scanner Does Not Work

Sep 27, 2010

I have a DCP 7030 multifunction printer. I have installed all proprietary drivers from Brother (printer an scanner drivers). [1] Printing works but unfortunately both Simple-scan and X-Sane do not recognize the scanner. Brother provides some scanner settings [2] - but unfortunately not for Fedora 13. I have tried the settings for Fedora 12 but they do not work. [URL]

View 1 Replies View Related

Hardware :: HP C5100 Printer - How To Make Scanner Work

Nov 26, 2010

I have an HP C5100 photosmart printer/copier/scanner which works fine as a printer from Linux and as a printer or scanner from a PC running Windows XP. The device is net connected not local to either box. "Sane" (installed) does not appear to support this printer (from web site) but other comments seem to imply that others have made it work using "hplip" (also installed). Nowhere do I see instructions on how to make the scanner work from Linux.

View 1 Replies View Related

Ubuntu :: Recommend Scanner / Printer / Copier Software That Will Work With 10.04

Jul 6, 2010

Could somebody recommend Scanner/Printer/Copier software that will work with Ubuntu 10.04. My Scanner is a HP PSC 2355 all-in-one.

View 2 Replies View Related

Hardware :: Cannot Get Xsane Image Scanner To Work With HP5610 All In One / What Is Error All About?

Dec 18, 2009

HP 5610 all in one device scanner settings please. The printer works fine, I have a problem getting the Scanner to work.

I am running Ubuntu Karmic on my Dual Core Desktop PC. When I run Xsane I get the preview window showing OfficeJet 5600 Series. I also get another little error window saying "Error during CMS conversion:Could not open Scanner ICM profile". It seems like Xsane recognises my HP 5610 All in One Printer/Scanner/Fax/Copier device but what is the error all about?

View 5 Replies View Related

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

Ubuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?

Dec 14, 2010

How to get this scanner to work with Ubuntu 10.10

It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.

I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.

Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...

View 3 Replies View Related

Hardware :: Using Iscan By Epson CX9300F - Could Not Send Command To Scanner - Check Scanner's Status

Mar 17, 2010

After downloading and installing iscan and run it i see this message:

Could not send command to scanner. Check scanner's status.

After command sane-find-scanner:

And this message is result of scanimage command:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Debian Hardware :: Get Epson Perfection V100 Scanner To Work With Lenny?

Jan 24, 2010

I have not been able to get my Epson Perfection V100 scanner to work with Lenny. The correct driver files have been downloaded from Avasys and installed.

View 2 Replies View Related

Ubuntu Installation :: Get To Work The Epson Perfection V300 (scanner) On Lucid?

May 3, 2010

I switched from Sidux to Ubunbtu Lucid yesterday. On Sidux I had to struggle a little but to get this scanner working but at the end everything was fine. However on Lucid no success, I googled around and followed different instructions found in the www. sane-find-scanner and scanimage -L can find it (but it takes some time for scanimage -L) however I cannot scan and the scanner also does not react at all. The reaction of iscan and all the other scanning software is not consistent, error messages vary. A am thinking about switching back to some older Ubuntu version in case that I cannot get it running, I need the scanner in order to send fax

View 5 Replies View Related

Hardware :: Getting Canon 8800F Scanner Working / No Other Scanner Found?

Sep 23, 2010

Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.

I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.

lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.

and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005

but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.

My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic

View 8 Replies View Related

Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status

Apr 9, 2010

Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports

'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..

View 3 Replies View Related

Debian Hardware :: Make Lexmark S305 Scanner (wifi) Work With Xsane?

Mar 21, 2010

After I solved the issue about printer, now I'm struggling to make the integrated scanner of lexmark S305 work with debian.The device is connected to the network through integrated wifi connection (it is NOT connected with usb to a host, which act as a server), but I don't know how xsane can recognize it.I have just added the ip address in /etc/sane.d/net.conf, but it doesn't work at all. I read some tutorials on how to configure a network scanner, but they are all related to a scanner connected to a computer through usb, and then shared on the network by this computer.The second issue (probably more important) is that xsane probably doesn't recognize even with usb connection the scanner. The latter is not listed in the supported scanner list. Indeed connecting by usb to my laptop, it doesn't work. I haven't found any driver for it, but probably it could work with driver of other scanners.

View 1 Replies View Related

Ubuntu :: XSane Image Scanner Won't Recognize Scanner?

Sep 7, 2010

I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.

View 9 Replies View Related

Debian Hardware :: Scanner HP M1319f MFP / Cant Use The Scanner?

Oct 22, 2010

my scanner used to work in lenny, now im using squeeze fresh install.

i intall hplip with synaptic in order to setup my scanner, printer is working, i dont need the fax, but the scanner is not working with xsane.

normal user and sudo see the scanner with

$ scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
$ sudo scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
code....

i know my user is in group lp and scanner root cant use the scannner either.

View 1 Replies View Related

Ubuntu :: Microphones Don't Work / Sort It?

Jun 4, 2010

I am running 10.04 on a desktop with a standard 1/8" microphone plugged in and receive no input audio. I bought a new microphone and still doesn't work, boot to WinXP and microphone works fine. Speakers using same audio card work fine in 10.04 and WinXP.

View 1 Replies View Related

Ubuntu :: Shift Key Does Not Work / Sort This?

Mar 16, 2009

My shift key does not work. Stopped working last night. If you're wondering how I got the caps in here I have to hit the capslock button every time. However, I cannot use anything that pertains to the shift key, it started last night. every time i hit the shift key the cursor disappears and no characters appear when i hit the keyboard.

View 9 Replies View Related

Ubuntu Networking :: D-Link DWA-140 Seems To Sort Of Work?

Mar 21, 2010

I've got an oldish laptop which I've installed 9.10 on. I plugged in a D-Link DWA-140 USB wifi dongle to see if it can connect to my wifi router. It quite happily flashed it's light, and when I click on the wifi icon on the top panel it lists a bunch of wifi networks including my own. However, when I select my network and enter the passphrase it doesn't connect, and just keeps asking for the passphrase/key again

View 1 Replies View Related

Ubuntu :: Samba's New Account Don't Work / Sort It?

May 20, 2010

SO i made a server with ubuntu 10.04.

I created 3 new accounts on the linux then made identical samba accounts to match. For some reason when i input the information to log into a shared directory it doesn't work. my original login works fine, code...

not sure why it doesn't work, i logged into the server with my other accounts. is there a step im missing?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved