OpenSUSE Hardware :: Skanlite Can't See Scanner?

Feb 24, 2010

I have a HP3500c scanner and skanlite does not see it. How do I get it or some other scanner program to work with it?

View 9 Replies


ADVERTISEMENT

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

Ubuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?

Dec 14, 2010

How to get this scanner to work with Ubuntu 10.10

It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.

I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.

Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...

View 3 Replies View Related

Hardware :: Using Iscan By Epson CX9300F - Could Not Send Command To Scanner - Check Scanner's Status

Mar 17, 2010

After downloading and installing iscan and run it i see this message:

Could not send command to scanner. Check scanner's status.

After command sane-find-scanner:

And this message is result of scanimage command:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Hardware :: Getting Canon 8800F Scanner Working / No Other Scanner Found?

Sep 23, 2010

Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.

I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.

lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.

and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005

but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.

My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic

View 8 Replies View Related

Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status

Apr 9, 2010

Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports

'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..

View 3 Replies View Related

Ubuntu :: XSane Image Scanner Won't Recognize Scanner?

Sep 7, 2010

I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.

View 9 Replies View Related

Debian Hardware :: Scanner HP M1319f MFP / Cant Use The Scanner?

Oct 22, 2010

my scanner used to work in lenny, now im using squeeze fresh install.

i intall hplip with synaptic in order to setup my scanner, printer is working, i dont need the fax, but the scanner is not working with xsane.

normal user and sudo see the scanner with

$ scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
$ sudo scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
code....

i know my user is in group lp and scanner root cant use the scannner either.

View 1 Replies View Related

OpenSUSE :: Scanner Won't Work / Sort It?

Aug 6, 2010

I am using Suse 11.1 on a 64-bit computer. Some time ago, I was helped on these forums to get a Brother MFC-640CW printer/scanner to work by downloading the relevant drivers from the Brother website. Although the printer works fine, when I attempt to scan something into the computer nothing happens. A pop up box appears on screen when the printer is used with an XP OS. Can anybody suggest a way to get the scanner working?

View 3 Replies View Related

OpenSUSE :: Use/setup Image-scanner On Network?

Jun 25, 2009

I have a printer/scanner/fax that's on the network. i have the printer part set up through cups but how do I set up the scanner? What programs can I use on opensuse to see the scanner?

View 9 Replies View Related

OpenSUSE Hardware :: Scanner Won't Work / Resolve This?

Feb 23, 2010

I recently have a need to get my HP ScanJet 5590 working. Never used it in suse, only in the old windoze daze. Running opensuse 11.2, kde 4.3.4 quite nicely.

When I dusted the scanner off (USB) and plugged it in and fired it up, then went into Yast, scanner, it correctly recognized the scanner by model, but the driver line has Not configured: in front of the driver info. And, it will not do a test scan, nor do any apps see the scanner. As far as I can see all the dependencies are installed, I just need to configure the scanner. But I can't find any place in Yast to do that, nor do I have a clue what command line would work.

View 5 Replies View Related

OpenSUSE Hardware :: Bearpaw Scanner Not Recognized?

Nov 15, 2010

I have a Bearpaw 1200CU scanner that is not recognized by Yast, so I cannot use XSane to scan my images. Is there anyway to get the driver?

View 2 Replies View Related

OpenSUSE Hardware :: HP OfficeJet 6110 Scanner Not Working?

Dec 18, 2009

I have a HP Office-Jet 6110 All-In-One for about 5 years now and I havve been using it on Suse and openSuse without a problem all these years. This morning I wanted to scan something and suddenly realised that the scanner is not working. I can print but not scan. i tried to set up the scanner using YaST like I have done for the past 5 years but it#s not working. Hpaio shows that no scanner is available for this driver. I can#t install the scanner. What has changed in 11.2 that devices that worked before are not working anymore?

View 7 Replies View Related

OpenSUSE Hardware :: Scanner Epson DX4450 Does Not Scan?

Jan 31, 2010

my all-in-one Epson scanner does not work. I tried to install the iscan drivers (free and/or proprietary) via repository and/or via Avasys website, but nothing happens: the scanner is not recognized. I use Gnome and openSUSE 11.2

View 3 Replies View Related

OpenSUSE Hardware :: Scanner Works But Won't Network / Solve This?

Mar 19, 2010

Fresh install of openSuSE 11.2.
Laserjet 1220 multifunction device.

Successfully installed, network driver also installed, XSane shows both local and network scanner on local machine. Scans locally via both drivers.

However, networked scanner is not discovered by machines on local network, using XSane. Did a similar installation a few months ago with openSuSE 11.0, which works fine on the same client machine.

Have tried disabling firewall, but still no joy.

So, questions:

1] Is there anything I have missed?
2] Is anything known to be broken in 11.2?

View 9 Replies View Related

OpenSUSE Hardware :: Scanner - Stopped Working After Some Update

Mar 25, 2010

Running openSUSE 11.2 with HP All-in-one 3055 printer/fax/scanner attached through network.
Using hplip package.

Printer works just fine. Scanner did work for quite some time, however it stopped working after some update about a month ago (using only opensuse update repo).

When doing hp-scan I get following error:

Checking all the logs I can think of I can't figure this one out. Tried newer hplip package fom HP site same issue (I have two systems, on one I've tried the new driver, on one only using opensuse update repo ...both same issue)

View 9 Replies View Related

OpenSUSE Hardware :: Configuring Parallel Port Scanner On 11.3

Dec 22, 2010

Just updated to Suse 11.3, in past versions, including 11.2 I could activate my Epson parallel scanner this way:

Modify this file removing the '#' form the line '#epson'
/etc/sane.d/dll.conf
Modify this file to indicate which port to use, like this:
/etc/sane.d/epson.conf
# epson.conf
# here are some examples for how to configure the EPSON backend
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
# Parallel port scanner:
#pio 0x278
pio 0x378
#pio 0x3BC

It doesn't work anymor, the parallel port is apparently active since I can do:
ls -l /dev/lp0
And I get:
-rw-r--r-- 1 root root 12 Dec 22 19:51 /dev/lp0

View 1 Replies View Related

Hardware :: A4 Flatbed Scanner For Document/images - Using Opensuse 11.3 ?

Oct 12, 2010

I wish to purchase a new A4 flatbed scanner for document/images, (using opensuse 11.3).

View 1 Replies View Related

OpenSUSE Hardware :: Scanner Hp Scanjet 3570c - Only Scan In Color

Feb 10, 2009

Whenever I try to scan documents (OpenSuse 11.1) with any of the available tools (such as scanlite, kooka, or xsane), I can only scan in color. Moreover, the result is basically unusable. I shows a turquoise background of differing intensity at various places. Why isn't there a possibility to scan black and white, grayscale, etc.? Seems like scanning still is a problem in Linux. I really don't want to have to "fall back" to M$-Windows for scanning, but that seems to be the only solution at the moment

View 8 Replies View Related

OpenSUSE Hardware :: Epson CX7800 Printer Scanner Not Detected?

Aug 2, 2010

I have an epson cx7800 printer/scanner that 11,3 doesn't detect on USB. I tried Yast-Hardware-printers and Yast-Hardware-printers and nothing is discovered/detected.

Are there repos for this stuff and is there a tutorial like the one for graphic card theory I could peruse?

View 3 Replies View Related

OpenSUSE Hardware :: Recommend Good All Round Flatbed Scanner

Oct 3, 2010

Can anyone recommend a good all round flatbed scanner, (for 11.3)?Main use would be for document scanning, but should be able to cope with photos occasionally.

View 3 Replies View Related

OpenSUSE Install :: 11.3: Can't Get Canon Pixma MG 5150 Scanner To Work

Jan 7, 2011

I'm trying to get my Canon Pixma MG 5150 scanner/printer to work. While the 'printer' is doing well the 'scanner' appears to be stubborn. I use the scangearpm-MG5100series-1.60-1 driver provided by Canon which is said to be fine with Suse 11.2.

The trouble is, that though the scanner scans it does not deliver anything back. Here are the details:

When I run scangearmp as root in a terminal I get the following output:

Code:
(scangearmp:6902): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

[Code]....

View 9 Replies View Related

OpenSUSE Hardware :: Setting Up Epson Stylus SX420W Printer / Scanner

Mar 17, 2011

I am trying to set up my Epson Stylus SX420W printer (via USB) on a fresh install of 11.4. I have found a driver called 'epson-inkjet-printer-nx420-1.0.0-1lsb3.2.x86_64.rpm', which I guess is right for my Intel Core i5-system on the Avasys-site that Epson refers to for Linux drivers.

I have downloaded the driver and installed it via Right-Click -> Open With -> Install/Remove Software, which seemed to go well. When I open Yast -> Hardware -> Printer -> Add, my printer is found all right, but 'No matching driver found'. Iam quite new to Linux.

View 9 Replies View Related

OpenSUSE Hardware :: Configure / Utilizing The Hardware Buttons On A Scanner (Scanjet 3300C)?

Dec 20, 2010

how to possible to configure the buttons on my scanner (HP Scanjet 3300C - it's an old one) to actually perform the tasks they're intended to do. The scanner itself works absolutely perfect despite its age (over a decade old).. however it has two physical buttons with a scanner and a printer icon on it. Now I don't particularly care much for the scan button, but it would be awesome if the print button automatically send whatever it's scanning to the printer as soon as it's done.

The only two things I could find that seem to be written with the idea to fulfill this role are KScannerButtons and scanbuttond. Both haven't received an update in years (2006 and 2007) and only seem to be good for spitting out an error. I also tried installing hp-lib, but it doesn't even recognize the printer (I'm guessing HP doesn't support hardware that old). Not sure if it would get me further even it was recognized.

View 1 Replies View Related

OpenSUSE Hardware :: Multi-function Epson Stylus Sx218 - Can Not Run The Scanner Function ?

Mar 24, 2011

I bought a multifunction stylus sx218 Espon model and I can not run the scanner function. I did some research and found a few solutions and very functional. I hope someone solves the problem. My version of openSUSE 11.2.

View 9 Replies View Related

OpenSUSE Hardware :: 11.4 And "Cannon Sensys MF4430" Scanner Drivers?

Jul 23, 2011

About ten days ago, I bought multifunctional printer Canon I-sensys MF4430. I did it after I saw there are linux drivers - rpm drivers. But, unfortunately, after buying and installing these package, I saw that drvers given on "Canon" download page are just for printer to work. And it works. But, scanner do not work! Can anybody tell me how to enable scanner which can not be recognized by opensuse 11.4 YaST?Actually this happens:when I click YaST(root password)/Hardware/Scanner autodetection does not recognize scanner. After I click Other -> Restart detection , system recognizes my scanner, but says that drivers are not configured.They are missing.

View 2 Replies View Related

OpenSUSE Network :: Create A Home Network To Share Files - Scanner And Printer

Dec 31, 2009

I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.

View 4 Replies View Related

OpenSUSE Hardware :: Canon MP250 Scanner And Printer Drivers / "Error During Device I/O"?

May 20, 2011

I am trying to get Canon MP250 printer and scanner working in OpenSUSE 11.3 and so far I've had limited success. Both components work up to a point, but aren't fully operational.First of all, I installed the drivers from Canon website for both parts of the multifunctional device. Here's the report on the versions (it's localised, but it shouldn't be hard to understand ).

The printer works for the most part. But it fails to set images to greyscale when I request the driver to. There are some guides about that for Ubuntu, but none for openSUSE that I could find. Also, what does the setting "Amount of Extension" in the printer options do?It would also be nice if I could set the printing quality as well. Right now it seems to print everything with the default quality setting, but personally I like using lower print quality since that saves ink and makes it a little faster.

The scanner, however, is hardly usable at all. If I try to use Canon's ScanGear MP to scan, I can hear that it operates the scanner, but the program itself freezes and after a while gives me the "Cannot communicate with scanner" error. On certain settings I can also hear that the scanner itself doesn't complete the scan (the indicator on it also reports an operation in progress, but it never gets completed).If I try to use Acquire images, the native KDE scanner application, I can get it to scan, but only on very specific settings: it must scan it in colour and the resolution must be equal to or over 300 dpi. If I try anything else, the resulting image file is completely blank or I get an "Error during device I/O". And, of course, it can't save PDF files.

View 5 Replies View Related

Ubuntu :: Scanner Not Seen On 10.10

Oct 28, 2010

I've been using a Nikon Coolscan 4000ED on Ubuntu for a couple of years via Vuescan with no problems at all.

The other day I upgraded to 10.10 and Vuescan can no longer see the scanner. So I tried X-Sane and Simplescan and they both say there is no scanner even though it's connected and switched on. So for some reason, Ubuntu 10.10 cannot see the scanner or perhaps the IEEE connection.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved