Ubuntu :: Solve The Wi-Fi Broadcom-driver In 11.04?
Apr 28, 2011
As you might have noticed the new broadcom driver in 11.04 is not working anymore, but you can use the old one from 10.10 if you follow these steps:
1. First you need to download the old broadcom driver (10.10) here:
http://archive.ubuntu.com/ubuntu/poo...untu5_i386.deb
2. Now it's time to delete the current driver:
open the console:
sudo gedit /var/lib/dpkg/status
search for "bcmwl-kernel-source" and delete the lines that are related to the driver.
3. Install the driver you have downloaded before by double-clicking the .deb file
4. Go to the Synpatic-Package-Manager and search for "bcmwl-kernel-source" again. Click on on it and go to "package" and make sure you lock it, so it won't be updated.
View 5 Replies
ADVERTISEMENT
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Feb 12, 2011
I'm trying to get a fresh install of Ubuntu 10.10 working with the closed Nvidia driver, as I would like to get the HDMI output working.
I have a Sony Vaio VPCCW18FX, with a Nvidia GT 230M graphics card. The open source nouveau driver works fine, but does not run smoothly. The only problem here is that it's needed to run with "nomodeset".
If i just activate the Proprietary Nvidia driver and reboot, it will hang after writing "Checking battery State [ok]". I have tried to add EDID from Windows partition, and here it hangs at a blank black/grey screen. I have tried hooking up an external display, no output on it either.
View 9 Replies
View Related
Jul 9, 2009
Everything was going fine. Once, I started my fedora 10 and I found out that no wireless driver is installed!!!
How can I check for this and fix this problem.
P.S. I am new to linux.
View 4 Replies
View Related
May 20, 2010
Very new to linux, just downloaded Ubuntu 10.04 and installed it, dual boot, no problems with initial installation.
Trying to install graphics card driver for:
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GTS 512] (rev a2)
Using Administration -> Hardware Devices
I selected the recommended driver and clicked activate. Download started then failed with error message:
SystemError: Failed to fetch http://gb.archive.ubuntu.com/ubuntu/...ntu3_amd64.deb Connection failed [IP: 91.189.88.30 80]
Screenshot attached.
Tried several times now and the download doesn't even seem to start any more.
My Internet connection is 3 mobile broadband, which may have something to do with it, bit it seems to be working well at the moment.
View 1 Replies
View Related
Nov 11, 2010
I am able to login to the system. code...
Are there any logs that you would like me to post?
I have tried reinstalling the NV display driver via "additional drivers" in the live CD, but they do not appear to be being retained on the HD version of Ubuntu. When I go back into the live cd the driver is not installed.
How can I switch the proprietary driver back on in the hard disk when I am running the live disk.
Is there a repair system program?
If not is there a way of forcing an upgrade on an upgraded system so that missing files are reinstalled?
If that does not work what should I do next to get the GDM to load?
View 1 Replies
View Related
May 11, 2010
System-->Admin-->Hardware Drivers States my STA driver is activated, but not in use... ug. having so many wireless issues with 10.04 i've been pulling my hair out for a week now. I assume this is why it says my network UNCLAIMED as well.
View 9 Replies
View Related
Feb 4, 2011
The Linux-phc kernel, available here, for 10.04, used to work fine for me, but starting awhile ago, it broke the wifi. I can't enable the broadcom driver, it says, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log
[Code]...
View 2 Replies
View Related
Jan 23, 2010
I just deleted my windows XP and installed Ubuntu 9.10 earlier this morning. I used wired connection to get drivers for my wireless network card.
When I did lspci, the very last line states:
Network Controller: Broadcom Coporation BCM4311 902.11b/g WLAN(rev 01)
I used the System -> Administration -> Hardware Driver and found 2 drivers. I have tried them both to connect to my D-Link Router. Neither of which worked.
For Broadcom B43 Driver, the wireless is able to detect wireless networks. However, it fails to establish connection.
For Broadcom STA Driver, the wireless cannot even detect wireless networks available.
What is the issue here and how do I resolve it so that I am able to connect onto the internet wirelessly?
View 9 Replies
View Related
May 23, 2010
I decided to use the STA wireless driver in my Ubuntu 10.04, and my connection actually became faster! Only problem is that it keeps on asking for my wifi password. I didn't have this kind of problem when I was using the b43 wireless driver - it just automatically connects everytime I reboot. how I can make my laptop stop asking for my password everytime I reboot?
View 3 Replies
View Related
Oct 16, 2010
After trying to make audio output work on Lenovo b560 notebook I finally succeeded but the wireless stopped working. The driver was removed. I tried to follow the instructions from Broadcom http://www.broadcom.com/docs/linux_sta/README.txt and it started showing the driver in admin - drivers, it shows that it is activated but not in use, but once I get to this point
"modprobe wl"
it shows this:
install /sbin/modprobe --ignore-install wl
insmod /lib/modules/2.6.32-25-generic-pae/updates/dkms/wl.ko
FATAL: Error inserting wl (/lib/modules/2.6.32-25-generic-pae/updates/dkms/wl.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[Code]...
View 3 Replies
View Related
May 3, 2011
I've been seeing a lot of people checking for hardware and software blocks using the rfkill command. I can't seem to get it to do anything at all on my Broadcom "4321AG"/"4328" wireless using the Broadcom STA driver. Of course, I have an old-fashioned hardware switch on the front of my laptop.
Here is some information on my working wireless setup (that rfkill can't seem to see):
Quote:
lspci | grep work
03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
*-network
description: Wireless interface
product: BCM4328 802.11a/b/g/n
[Code]....
When I try rfkill list all, it does nothing, just returns me to my BASH prompt. The wifi, wlan, bluetooth, and wwan identifiers also seem to do nothing with rfkill list. It looks to me like it "hooked" IRQ19 in the BIOS, and the wireless does work quite stably (although it does need several seconds to auto-reestablish wireless when Linux goes to "sleep," say overnight).
This page doesn't really tell me much more than rfkill did with no parameters:
[URL]
Is this just because I have an electromechanical wireless switch, or is it a 64-bit problem, or...
EDIT: Oh yes, sudo rfkill list all also just returns me to my BASH prompt without any whistles or bells (after entering a password)...
View 1 Replies
View Related
Jan 20, 2010
My Broadcom STA wireless driver has failed to installed. The error report says that "PLEASE HAVE A LOOK AT THE LOG FILE FOR DETAILS: /var/log/jockey.log WHAT SHOULD BE DONE TO GET THE WIRELESS STA driver functional.? Gotta see it functiioning back!
View 5 Replies
View Related
Jun 19, 2010
installing the Broadcom Wireless LAN driver. I am working from an HP Pavillion dv6-2 2150us (if that has any relevance). The problem seems to be with the installation method I have used. I burned the ISO file properly onto a CD, but I did not install through the disk boot-up method. The reason for this is because I couldn't partition my HDD correctly (I am trying to dual boot with the Windows 7 OS already installed). So, I installed Ubuntu via the option from the CD Installer through Windows 7. I am not sure how to go about getting and installing the Broadcom Wireless LAN driver onto Ubuntu.
View 1 Replies
View Related
Jul 10, 2010
After successfully installing Ubuntu Karmic on a friend's MacBook 3,1 I tried to get the wireless working. On the Live CD, the Broadcom STA driver worked fine, but now that I've finished installing, I'm having problems. The driver is installed, but Hardware Drivers says it isn't enabled. I try to activate it, put in my password, and the "Enabling Driver" dialog pops up for a split second, disappears, and the driver doesn't get activated. I've tried Google to no real avail.
View 1 Replies
View Related
Nov 28, 2010
I just recently recieved a Mini CQ10-525DX with a Broadcom 4313 wlan card. when loading ubuntu i notice it says that it supports 4311 4312, so i looked on the broadcom website and they have a newer update with 4313 coverage. I downloaded it but do not know how to install it.
View 9 Replies
View Related
Jan 15, 2011
I cant get the STA driver activated. I keep getting the error:
Code:
SystemError: installArchives() failed
Synaptic can't mount my install CD, maybe that has to do something with the problem.
[code]....
View 1 Replies
View Related
Jan 24, 2011
I just bought a Lenovo B560, everything working except the Broadcom 4727 wireless (only in terminal it works)
View 4 Replies
View Related
Apr 29, 2011
In Ubuntu 11.04 32-bit
Dell Studio 1558
Everytime I want to active it I got the following: installation of this driver failed. have a look at the log file for details: /var/log/jockey.log I don't know if this is related to Software Sources, I only have Canonical Partners and Independent. I installed Ubuntu 11.04 from an ISO file and used the whole disk
View 3 Replies
View Related
Jul 29, 2011
i have windows vista with a broadcom 802.11g network adapter.I dont know much about computers but i would like to know how to install it on the ubunto OS so i can use internet ?
View 2 Replies
View Related
Mar 26, 2010
I need to find a Broadcom BCM4312 driver that has a .inf file extension. I cannot find one anywhere. I need to atleast once use wireless inside of ubuntu.
View 2 Replies
View Related
Sep 17, 2010
I said good bye to Windows and moved to Linux. I am using OpenSUSE 11.3 on my netbook (Acer Aspire d260) and really happy with that. Im having problem with my wireless card that includes Bluetooth as well. I Googled and found that its partially supported by b43 (guess its a driver that comes with kernel). I installed Broadcom STA and it seems that my wireless is working but still not sure about that.I want to check if the wireless is really working and I want my Bluetooth to work as well but couldn't find a driver for that.
View 8 Replies
View Related
Oct 6, 2010
Is there a way to activate the Broadcom BCM4322 driver in Ubuntu on a MacBook Pro 5.1? The instructions that I found should work, but don't.I am currently running 2.6.32-24 but would like to install the driver to the 2.6.32-25-pae kernel (the standard kernel uses only 2.7 of 4GB RAM). According to wireless.kernel.org this Broadcom driver is not supported. Do I have to switch to Debian? The other day I installed vpnc, and it works but only over the wired connection. AirPort in Mac OS works, so there is nothing wrong with the hardware.
View 2 Replies
View Related
Jan 12, 2010
I just got my new ubuntu 9.10 os desktop version installed into my lenovo laptop but then my WiFi is not working. Previously I had a broadcom driver which currently is not functioning with the ubuntu 9.10.
View 2 Replies
View Related
Jan 14, 2010
Installed 9.10 side-by-side with Vista, then installed the Broadcom STA wireless driver, rebooted to activate it no luck, no connection, neither wireless nor wired. Did this several times. Getting online in Vista works fine.
Here's the system I'm using:
HP tx2500z laptop
Vista Home Premium SP1
AMD Turion X2 Dual-Core Mobile processor RM
ATI Radeon HD 3200 graphics card
Broadcom 4322AG 802.11a/b/g/draft-n WiFi adapter
Realtek RTL 8186C (P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
View 4 Replies
View Related
Feb 4, 2010
I am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :
Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log
[code]....
View 9 Replies
View Related
Jul 4, 2010
The Hardware Driversscreen shows that it needs the driver for it and when I click "activate" it tries to download it. This doesn't work because neither my ethernet nor wireless cards work.
View 4 Replies
View Related
Jul 12, 2010
When I freshly installed my Ubuntu 10.04, broadcom wireless worked after I installed the driver using hardware manager. But somehow it got de-activated, and not its not working. I need help related to that. Here is some output which might help you to understand the problem.
Code:
paras@ubuntu:~$ sudo lshw -C network
[sudo] password for paras:
*-network DISABLED
description: Wireless interface
[code].....
View 7 Replies
View Related
Aug 14, 2010
I'm using a Dell Vostro 1000, and i just installed lucid. However, whenever i try to install either the broadcom STA or B43 drivers, i get this message
SystemError: Failed to lock /var/cache/apt/archives/lock
View 1 Replies
View Related
Sep 26, 2010
We have a Lynksys wmp300n networking card and wants it to work with her new 64-bit system (Ubuntu 9.10). One of the files needed to use it in ndiswrapper was not on her CD and isn't available from their web site. After a few days, I found a Compaq driver .exe that contains the file and thought I was home free. The problem now is that I can't make the broadcom driver the system defaulted to to stop being used. My steps were:
sudo apt-get install network-manager
sudo ndiswrapper -i ~/Desktop/bcmwl5.inf
***//got a -> couldn't find "BCMWL564.SYS"
sudo ndiswrapper -r bcml5
***//got the sys file from a divers for a Compaq card I found a link to
sudo ndiswrapper -l
***//got nothing back
sudo ndiswrapper -i ~/Desktop/bcmwl5.inf
sudo ndiswrapper -l
[Code]....
* Now at this point I don't understand why the b43-pci-bridge driver is still being used nor what to do about it. Edit-> Not sure why it added asterisks in place of my false spaces that I used for indentation, but I can't seem to make it stop replacing them (or stop deleting normal spaces or ignoring and not rendering tabs).
View 1 Replies
View Related
