Ubuntu Networking :: Wmp300n - Can't Stop Broadcom Driver To Use Ndiswrapper

Sep 26, 2010

We have a Lynksys wmp300n networking card and wants it to work with her new 64-bit system (Ubuntu 9.10). One of the files needed to use it in ndiswrapper was not on her CD and isn't available from their web site. After a few days, I found a Compaq driver .exe that contains the file and thought I was home free. The problem now is that I can't make the broadcom driver the system defaulted to to stop being used. My steps were:

sudo apt-get install network-manager
sudo ndiswrapper -i ~/Desktop/bcmwl5.inf
***//got a -> couldn't find "BCMWL564.SYS"
sudo ndiswrapper -r bcml5
***//got the sys file from a divers for a Compaq card I found a link to
sudo ndiswrapper -l
***//got nothing back
sudo ndiswrapper -i ~/Desktop/bcmwl5.inf
sudo ndiswrapper -l
[Code]....

* Now at this point I don't understand why the b43-pci-bridge driver is still being used nor what to do about it. Edit-> Not sure why it added asterisks in place of my false spaces that I used for indentation, but I can't seem to make it stop replacing them (or stop deleting normal spaces or ignoring and not rendering tabs).

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Can't Get Ndiswrapper And Broadcom BCM4321 To Work?

Apr 6, 2011

I've been using Ubuntu for months now, and love it except for the fact that I'm getting poor speeds while using wireless.

For a little background information: I have a Dell XPS m1530 with a Broadcom BCM4321 wireless card.

I've used the 32-bit version and can't get ndiswrapper to work. It will say invalid driver or something.

When using the 64-bit version, my wireless card's native windows driver will install and it says "Hardware Present", but the wi-fi isn't activated at all.

I've followed the guide found here:
url
and have also tried this person's solution:
url

However, nothing works. Despite the fact that ndiswrapper shows that my driver is installed, the wireless doesn't work.

View 1 Replies View Related

Fedora Networking :: Acer Laptop, Broadcom Wireless And Ndiswrapper?

Aug 7, 2009

sometime back when installing FC10, i tried installing ndis wrapper, and later i installed the broadcom driver bcm431 (i think). also i didn't remove the ndis wrapper.

all was fine untill a yesterday when ndis wrapper and some related packages got updated which somehow caused wireless to stop working. lspci showed the hardware present.

to get it to work, i did a yum erase ndis-wrapper, followed by a reboot.

it may not be the most elegent way, but it worked for me.

hardware specs:acer aspire 4720Z (mine has broadcom wireless, others may have atheros)

View 4 Replies View Related

CentOS 5 Networking :: Macbook Pro 5,5 - Late 2008 - Wireless - Download The Broadcom Driver And Create A Driver Module

Feb 20, 2010

I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.

Using these instructions....

[url]

When I make the WLAN driver, I get this:

View 2 Replies View Related

Ubuntu Networking :: Disabling Ndiswrapper/resetting To Default Driver?

Jan 4, 2010

I just installed ndiswrapper so I wouldn't have to deal with it. Thing is, I'm not fairly certain my driver is one of the ones ubunutu comes with. I removed ndiswrapper (from the add/remove section, not sure if thats a full uninstall or if I should of used terminal), but my driver is still listed as "ndiswrapper". How do I completely remove that, so my system can use default drivers?

View 1 Replies View Related

Ubuntu Networking :: No Such File Or Directory - Ndiswrapper For Wirless USB Driver

Aug 24, 2010

I am trying to use ndiswrapper for an .inf file located a /home/user/downloads

The full path would then be the file at the end correct?

/home/user/downloads/netr28u.inf

I keep getting the error that couldn't open /home.user/downloads/netr28u.inf: no such file at /usr/sbin/ndiswrapper-1.9 Line 219

View 6 Replies View Related

Ubuntu Networking :: Installed Driver Via Ndiswrapper. Wireless Still Not Working?

Mar 30, 2011

Before I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.

[Code]...

View 9 Replies View Related

Networking :: Reinstalling Driver With Ndiswrapper After Kernel Upgrade?

Mar 10, 2011

Anyone know of a good guide to use reinstalling a wireless driver using ndiswrapper after a kernel updates? I seem to have to do it a lot, and I'm looking for some good directions.

View 6 Replies View Related

Ubuntu Networking :: No Driver Claimed In Ndiswrapper - Atheros AR5001X+ Wireless Network Adapter?

Feb 26, 2010

I recently switched from Windows XP to a clean install Ubuntu Karmic Koala 9.10 but it seems to be quite a problem to get the wifi up and running. In Windows the nearby network all appeared in network connections but the same section in Ubuntu is empty. So I decided to go with the ndiswrapper guide to solve the problem with an unclaimed driver. After an entire day messing with my computer I'm still not close... Below follows excerpts taken from the Ndiswrapper guide with posted results from my computer. "ndiswrapper won't work until it thinks that your Windows drivers have been properly installed and that they are the appropriate ones for your wireless card. You can run the command: ndiswrapper -l"

result:

WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net5211 : driver installed
device (168C:0013) present (alternate driver: ath5k)

So I've posted the result the name of my wireless card below: lspci -nn

Result:

00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]

[code]...

It seems like the network is disabled or unclaimed or both. What to do? I'm stuck after spending an entire day trying to install the wifi. I had no problems in Windows XP but it seems to be quite impossible in Ubuntu.

View 7 Replies View Related

Ubuntu Networking :: Neither Broadcom B43 Nor STA Driver Is Working?

Jan 23, 2010

I just deleted my windows XP and installed Ubuntu 9.10 earlier this morning. I used wired connection to get drivers for my wireless network card.

When I did lspci, the very last line states:

Network Controller: Broadcom Coporation BCM4311 902.11b/g WLAN(rev 01)

I used the System -> Administration -> Hardware Driver and found 2 drivers. I have tried them both to connect to my D-Link Router. Neither of which worked.

For Broadcom B43 Driver, the wireless is able to detect wireless networks. However, it fails to establish connection.

For Broadcom STA Driver, the wireless cannot even detect wireless networks available.

What is the issue here and how do I resolve it so that I am able to connect onto the internet wirelessly?

View 9 Replies View Related

Ubuntu Networking :: Broadcom STA Driver Active But Not In Use?

Oct 16, 2010

After trying to make audio output work on Lenovo b560 notebook I finally succeeded but the wireless stopped working. The driver was removed. I tried to follow the instructions from Broadcom http://www.broadcom.com/docs/linux_sta/README.txt and it started showing the driver in admin - drivers, it shows that it is activated but not in use, but once I get to this point

"modprobe wl"
it shows this:
install /sbin/modprobe --ignore-install wl
insmod /lib/modules/2.6.32-25-generic-pae/updates/dkms/wl.ko
FATAL: Error inserting wl (/lib/modules/2.6.32-25-generic-pae/updates/dkms/wl.ko): Unknown symbol in module, or unknown parameter (see dmesg)

[Code]...

View 3 Replies View Related

Ubuntu Networking :: Rfkill Does Nothing Under Broadcom STA Driver?

May 3, 2011

I've been seeing a lot of people checking for hardware and software blocks using the rfkill command. I can't seem to get it to do anything at all on my Broadcom "4321AG"/"4328" wireless using the Broadcom STA driver. Of course, I have an old-fashioned hardware switch on the front of my laptop.

Here is some information on my working wireless setup (that rfkill can't seem to see):

Quote:

lspci | grep work
03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
*-network
description: Wireless interface
product: BCM4328 802.11a/b/g/n

[Code]....

When I try rfkill list all, it does nothing, just returns me to my BASH prompt. The wifi, wlan, bluetooth, and wwan identifiers also seem to do nothing with rfkill list. It looks to me like it "hooked" IRQ19 in the BIOS, and the wireless does work quite stably (although it does need several seconds to auto-reestablish wireless when Linux goes to "sleep," say overnight).

This page doesn't really tell me much more than rfkill did with no parameters:

[URL]

Is this just because I have an electromechanical wireless switch, or is it a 64-bit problem, or...

EDIT: Oh yes, sudo rfkill list all also just returns me to my BASH prompt without any whistles or bells (after entering a password)...

View 1 Replies View Related

Networking :: Activate Broadcom Driver

Oct 6, 2010

Is there a way to activate the Broadcom BCM4322 driver in Ubuntu on a MacBook Pro 5.1? The instructions that I found should work, but don't.I am currently running 2.6.32-24 but would like to install the driver to the 2.6.32-25-pae kernel (the standard kernel uses only 2.7 of 4GB RAM). According to wireless.kernel.org this Broadcom driver is not supported. Do I have to switch to Debian? The other day I installed vpnc, and it works but only over the wired connection. AirPort in Mac OS works, so there is nothing wrong with the hardware.

View 2 Replies View Related

Fedora Networking :: 14 X64 Ndiswrapper Modprobe Ndiswrapper Module Not Found?

Jan 28, 2011

i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.

View 1 Replies View Related

Ubuntu Networking :: Installing The Newest BroadCom STA Driver

Nov 28, 2010

I just recently recieved a Mini CQ10-525DX with a Broadcom 4313 wlan card. when loading ubuntu i notice it says that it supports 4311 4312, so i looked on the broadcom website and they have a newer update with 4313 coverage. I downloaded it but do not know how to install it.

View 9 Replies View Related

Ubuntu Networking :: Unable To Activate Broadcom STA Driver?

Jan 15, 2011

I cant get the STA driver activated. I keep getting the error:

Code:
SystemError: installArchives() failed
Synaptic can't mount my install CD, maybe that has to do something with the problem.

[code]....

View 1 Replies View Related

Ubuntu Networking :: Can't Install Broadcom STA Wireless Driver

Apr 29, 2011

In Ubuntu 11.04 32-bit
Dell Studio 1558

Everytime I want to active it I got the following: installation of this driver failed. have a look at the log file for details: /var/log/jockey.log I don't know if this is related to Software Sources, I only have Canonical Partners and Independent. I installed Ubuntu 11.04 from an ISO file and used the whole disk

View 3 Replies View Related

Ubuntu Networking :: Installing Broadcom Wireless Driver?

Jul 29, 2011

i have windows vista with a broadcom 802.11g network adapter.I dont know much about computers but i would like to know how to install it on the ubunto OS so i can use internet ?

View 2 Replies View Related

CentOS 5 Hardware :: Lenovo S12 Wireless - Broadcom Bcm4312 Rev01 - Using NdisWrapper

Oct 17, 2010

This is probably trivial for most linux users, but here is what I did to get wireless working with the Centos 5.5 LiveCD on my Lenovo S12.

For reference, here is the output of the lspci command:

View 3 Replies View Related

Fedora Networking :: Getting Crashes With Broadcom-wl Driver In F11?

Jul 16, 2009

My F11 x86_64 machine has regularly been crashing at boot up. I removed broadcom-wl and installed ndiswrapper, now the crashes seem to have gone.

I wonder if anyone else has noticed issues, I have this Broadcom wireless model:

0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)

View 3 Replies View Related

Ubuntu Networking :: Installed Broadcom STA Wireless Driver In 9.10 But Still Can't Get Online

Jan 14, 2010

Installed 9.10 side-by-side with Vista, then installed the Broadcom STA wireless driver, rebooted to activate it no luck, no connection, neither wireless nor wired. Did this several times. Getting online in Vista works fine.

Here's the system I'm using:

HP tx2500z laptop
Vista Home Premium SP1
AMD Turion X2 Dual-Core Mobile processor RM
ATI Radeon HD 3200 graphics card
Broadcom 4322AG 802.11a/b/g/draft-n WiFi adapter
Realtek RTL 8186C (P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)

View 4 Replies View Related

Ubuntu Networking :: Unable To Activate Broadcom STA Wireless Driver?

Feb 4, 2010

I am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :

Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log

[code]....

View 9 Replies View Related

Ubuntu Networking :: Finding The Broadcom BCM4306 Wireless Driver?

Jul 4, 2010

The Hardware Driversscreen shows that it needs the driver for it and when I click "activate" it tries to download it. This doesn't work because neither my ethernet nor wireless cards work.

View 4 Replies View Related

Ubuntu Networking :: Broadcom STA Driver Not Working In 10.04 With Dell Xps 1647

Jul 12, 2010

When I freshly installed my Ubuntu 10.04, broadcom wireless worked after I installed the driver using hardware manager. But somehow it got de-activated, and not its not working. I need help related to that. Here is some output which might help you to understand the problem.

Code:

paras@ubuntu:~$ sudo lshw -C network
[sudo] password for paras:
*-network DISABLED
description: Wireless interface

[code].....

View 7 Replies View Related

Ubuntu Networking :: Broadcom Driver Doesn't Install / Sort It?

Aug 14, 2010

I'm using a Dell Vostro 1000, and i just installed lucid. However, whenever i try to install either the broadcom STA or B43 drivers, i get this message

SystemError: Failed to lock /var/cache/apt/archives/lock

View 1 Replies View Related

Ubuntu Networking :: Broadcom Sta Driver Disabled And Not Working After Update?

Oct 2, 2010

I applied the latest updates today and when I rebooted, My wireless broadcom driver is not working and the ifconfig does not list it either anymore, was working 8 min ago but is now dead. If I turn off the wireless with a switch and back on, I get a blue light but it remains disabled and greyed out on the network icon. Ubuntu 10.04, latest updates applied daily. I removed the driver and reinstalled it, it did not help at all. Also, my Truecryt gdecrypt stopped working.

Update: it seems the wireless switch on the front of the laptop is now working backwards, in checking the daemon log I found Turning off the wifi so the light goes out:

Oct 2 20:09:18 chuck-laptop NetworkManager: <info> WiFi now enabled by radio killswitch
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> (eth1): bringing up device.
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> (eth1): supplicant interface state: starting -> ready

[code]...

Update, I found that if I boot the laptop up with the networking switch off, then, after I'm booted up, turn it on, it works. However if I reboot the laptop with the network switch in the on position I get the above issue with the switch being inverted and not working properly.

View 2 Replies View Related

Ubuntu Networking :: Broadcom Laptop Wifi Card Driver?

Mar 9, 2011

I have an emachines D620 laptop running Ubuntu 10.10 with a Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01). I havent done anything with it and cant seem to get it to work. I know this because when I had visto on it the card worked, but know it says that its firmware is not enabled and ive tried installing the drivers using the Additional Drivers under Administration. I would like it to be working so I can use my laptop's internet.

View 5 Replies View Related

Ubuntu Networking :: Offline Installation Of Broadcom 43xx Driver Without CD

May 25, 2011

I'm having problems installing the drivers after doing an install using WUBI.I no longer have the installation disc for 10.10 as I had to reformat my HD after having problems with my Win7 and Ubuntu installation (on separate partitions), so I did this set up so they can co-exist better on the single HD. It's a bit of a long story, so that's the short version.My particular problem is that I am unable to install the drivers needed because I had let WUBI download the disc and after installation I couldn't locate it on my HD. It must have been removed right after installation. I have a copy of the contents on a bootable USB, but I don't know how to point the system/repository to it. So I'm sure I have the all the required materials to make this happen. I just don't know how.

I've located the driver in the media/usb/pool/restricted/ folder, but synaptic/software installer insists on downloading the dependencies even if I don't have internet. I checked the CDROM option of in the repositories panel, but it can't locate the disc.Can anyone tell me which dependency files are needed and the command to install them, if need be. I'm so sorry. I am still very new to linux, but I am quite satisfied about using it as my working environment.

View 1 Replies View Related

Ubuntu Networking :: Broadcom STA Wireless Driver Causes System Crash

Jul 1, 2011

sent the following email to Broadcom [URL]. I'll post an update if I receive a response. The current Linux STA 802.11 driver causes my system to crash.I've verified this under Ubuntu 11.04 and Linux Mint 11(an ubuntu derivative). Oddly enough, everything worked find under Ubuntu 10.10. My chipset is the 4321, my CPU is an AMD Phenom II 920, and the motherboard is an ASUS M3A78-EM. I tried the STA driver that ships with Ubuntu as well as compiling the one at [URL], including the patch for kernel versions > 2.6.37.

I am confident that the linux driver is the problem. If I connect my machine to my router using an ethernet cable, everything works fine. Also, the wifi adapter works fine under Windows. The symptoms are that the wifi adapter appears to connect to my network correctly and works fine for short transfers. But when I try a larger transfer, such as a speed test or streaming an mp3, one of three things happens after about 5 to 10 seconds:

1) The screen remains in graphics mode but locks up, including the mouse pointer. No keyboard input has any effect.

2) The screen goes into text mode and repeats the following over and over: [435.610002] ehci_hcd 0000:00:13.2CI-DMA:Out of IOMMU space for 18 bytes.

3) The screen goes into text mode and prints what appear to be CPU register contents. I took a picture of this with my phone if it will help, but obviously the text is kind of hard to make out.

View 5 Replies View Related

Fedora Networking :: Linksys WPC300N - No Broadcom-wl Driver

Aug 16, 2010

My 32-bit Celeron M laptop has a Linksys WPC300N PCMCIA wireless N card (Broadcom 4321 chipset).

I tried but have been unable to install the akmod version of the broadcom-wl driver:

Code:

Code:

Code:

Code:

Code:

FATAL: Module wl not found.

Code:

The card is recognized by lspci but the driver module broadcom-wl is not found. I don't see b43 and ssb modules so I can't blacklist them.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved