Ubuntu :: Maverick Fails To Load Grahical Display After NV Driver Deactivated / Solve It?
Nov 11, 2010
I am able to login to the system. code...
Are there any logs that you would like me to post?
I have tried reinstalling the NV display driver via "additional drivers" in the live CD, but they do not appear to be being retained on the HD version of Ubuntu. When I go back into the live cd the driver is not installed.
How can I switch the proprietary driver back on in the hard disk when I am running the live disk.
Is there a repair system program?
If not is there a way of forcing an upgrade on an upgraded system so that missing files are reinstalled?
If that does not work what should I do next to get the GDM to load?
View 1 Replies
ADVERTISEMENT
Dec 6, 2010
I've been using kubuntu for a while, and I've been having this issue since the release of the 2.6.32-23 kernel. Originally, I thought it was related to my raid array and this bug: [URL] I'm still not convinced they're not related, but there is also apparently the possiblity of an nvidia driver issue. Previously, I rebooted infrequently, and I had a spare hard drive installed, so my grub menu would always appear (as it detected an alternate OS on this drive) and it was trivial to select the 2.6.32-22 kernel. Since I installed all updates, including the -35 kernel, it ran update-grub and now I have to press shift when I reboot. Specs/Summary:
Kubuntu 10.04
amd64.
nvidia driver 195.36.24
RAID 1 (linux software raid)
kernels installed: 2.6.32-21 - 2.6.32.25
when I boot with -22 or earlier, everything works great. when I boot with -23 or later, I get the kubuntu splash screen, followed by it switching to tty2, then I get it switched back to where the X screen should be, with the system log displayed, and then it switches back to tty2. After installing -35, I panicked a bit as I'd never had the grub screen not show (not knowing about the shift key), and so I poked around logs and it showed nvidia driver errors. I tried removing my xorg.conf file and rebooted, and I got the desktop to show again. I prefer the nvidia driver as I sometimes use dual monitors.
View 7 Replies
View Related
Sep 25, 2010
I have a:
# lspci | grep Ether
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Looks like the r8169 module that gets loaded is not a valid choice for this chipset. The main error that I see is:
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
I have verified the cable and it's good the windows machine next door is fine using it without packet loss.
The system is a HP Desktop, just CentOS 5.5 loaded on it (base, with no updates).
View 1 Replies
View Related
May 11, 2010
Every time I boot, I get the following when the Nvidia driver tries to load.
Here is the Backtrace
Memory map:
View 4 Replies
View Related
May 8, 2010
My system is a Lenovo B500 All-In-One, with an Nvidia GTS 250M video card. nv seems to work okay, but I cannot get the desktop to load with the nvidia driver (nvidia-current, from the repository). I've been hacking away at this for a week and a half with no results. Every time I try to boot with the nvidia driver, the splash screen comes up for a second, the screen flashes a couple times between a "static" screen and tty2, then the screen seems to go to a test mode, where it flashes a series of solid colors indefinitely. Looking at /var/log/Xorg.0.log, I see the following:
Code:
(II) May 08 19:06:53 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) May 08 19:06:53 NVIDIA(0): enabled.
(WW) May 08 19:06:54 NVIDIA(0): Failed to enable display hotplug notification
[code]....
View 9 Replies
View Related
Aug 24, 2010
I am a newbie to Ubuntu and I am having problem with loading Gnome and startx. I have ubuntu 9.1 installed on my Dell Inspiron E1505 system. The problem started when gnome-power-manager started giving error regarding configuration settings not installed properly. I tried to google it and after lot of searching I figured out that my root directory is almost full. Moving some folders helped me solve the problem. But in the meantime I think I have screwed up some where. Now my Gnome or startx wouldnt load. Ubuntu logins my user profile and after that just sits that with the cursor revolving. When I press ctrl+Alt+F1 it gives no errors. Then I stop gdm by code...
View 3 Replies
View Related
Mar 12, 2010
I've downloaded the firmware from http://www.otit.fi/~crope/v4l-dvb/af..._files/4.95.0/ and placed it in /lib/firmware. I'm using Karmic. MythTV and Kaffeine both see the devices. They attempt to tune but I can't get any channels out because they can't tune.
View 3 Replies
View Related
Apr 5, 2011
So I upgraded to Natty, didn't like it and decided to go back to Maverick. Got out my trusty Live CD and reinstalled, no problem. Unfortunately now it just takes me to the screen with the list of possible OSes to start, and when I press enter it says:
Code:
error: symbol not found: 'grub_os_area_addr'.
I don't appear to be able to do anything from there. I've had so much trouble with this blinking computer lately that I'm even considering going back to Windows.
View 1 Replies
View Related
Nov 23, 2009
Ejabberd fails to start in f-12. ejabberd-2.0.5-9.fc12.i686. This ran fine in f-10 and f-11. Getting a large number of strange error messages from the ejabberd log code...
Looks like it may be a permissions problem.
Anybody from the ejabberd community here that has gotten ejabberd to work on f-12?
View 1 Replies
View Related
Dec 8, 2010
Maverick (64 bit) will suspend to RAM on my desktop computer immediately after I boot it up (before I start working). But after I have some programs open, it always fails to suspend. I get the typical blinking cursor in the upper right corner of a black screen. Then, after 20 seconds, the screen comes back on. The logs contain a message that "Freezing of tasks failed after 20.01 seconds." The problem task is usually listed as gnome-panel. Sometimes other tasks are listed too (such as Nautilus). Why will gnome-panel allow me to suspend soon after booting up, but not allow suspend after I start working with applications? I am not changing anything in the panel. And deleting the applets I have installed (system monitor and hardware monitor) doesn't make any difference - the problem continues. As I said, sometimes Nautilus is listed as the task that refuses to freeze.
If I switch users, I can suspend. I assume switching users just puts me in the "clean" state I have with my own user after booting up, so this doesn't really tell me anything new. I have searched all the other threads I can find. Most of the extensive suspend debugging threads are either from the 2007 era or they deal with laptops or resume issues. My issue is failure to suspend on a desktop. As you can see from the logs, I've been working on this for a month already!
Here's a typical error message:
Nov 7 01:52:59 MyComputer kernel: [ 1625.221296] Freezing of tasks failed after 20.01 seconds (1 tasks refusing to freeze):
Nov 7 01:52:59 MyComputer kernel: [ 1625.221374] gnome-panel D 000000010001fdc2 0 1925 1853 0x00800004
Here's an example log showing 2 tasks that fail to freeze:
Code:
Nov 9 01:25:09 MyComputer kernel: [16615.765114] PM: Syncing filesystems ... done.
Nov 9 01:25:09 MyComputer rtkit-daemon[1738]: The canary thread is apparently starving. Taking action.
Nov 9 01:25:09 MyComputer kernel: [16615.767512] PM: Preparing system for mem sleep
[code]....
View 9 Replies
View Related
Mar 18, 2010
I am using ubuntu 9.10,when i bootup my system, it gives the error that "You are using very low level of grapics and system is unable to load module i810;
solution how to fix it
View 4 Replies
View Related
Mar 4, 2011
I am working with Rhel 5.5. I am creating rpms and I have an issue. I want to bzip up the file before I make the rpm. Then I want to unzip it at install time. I add the zip up work to the %prep tag and added the unzip to the %prerun tag of the SPEC file. Everything works fine.
Then I install the rpm to a different folder with rpm -i --root /tmp for example and the scripts fail to run because the script can't find /bin/sh.
It makes sense because rpms are dependent on the absolute paths to the file, but I want to know how to still have the scripts run. I tried to put the /bin/sh in the /tmp folder (in the example above) but it still can't find it. And yes i do have /bin/sh on the system.
View 4 Replies
View Related
Dec 29, 2010
I've got a dual-monitor thing going on with an EeePC 701 - its own 7" screen display and a 14" monitor. It's running regular Ubuntu 10.10.The screenshot is the display I get on the 14" monitor. What's up with the top-left corner?
View 1 Replies
View Related
Apr 28, 2011
As you might have noticed the new broadcom driver in 11.04 is not working anymore, but you can use the old one from 10.10 if you follow these steps:
1. First you need to download the old broadcom driver (10.10) here:
http://archive.ubuntu.com/ubuntu/poo...untu5_i386.deb
2. Now it's time to delete the current driver:
open the console:
sudo gedit /var/lib/dpkg/status
search for "bcmwl-kernel-source" and delete the lines that are related to the driver.
3. Install the driver you have downloaded before by double-clicking the .deb file
4. Go to the Synpatic-Package-Manager and search for "bcmwl-kernel-source" again. Click on on it and go to "package" and make sure you lock it, so it won't be updated.
View 5 Replies
View Related
Nov 9, 2010
I just upgraded my lenovo T61p to ubuntu 10.10 maverick. I use the thinkfinger package to use my fingerprint reader for sudo/login/screen unlocking. This has worked perfectly in previous ubuntu releases, but I can only get it to work for login, not sudo or locked screen.I think the problem has to do with uinput not loading. I have it in /etc/modules, but it still doesn't show up (I also manually load it with modprobe and it won't work):
Code:
kevin@milner:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
[code]....
View 9 Replies
View Related
Oct 11, 2010
I just upgraded my laptop to 10.10 and now when I boot the display doesn't show anything. This laptop worked flawlessly on 10.04. I can tell the underlying system is fine, because if I type my boot password the hard disk activity picks up like it is continuing to boot, and CTRL+ALT+DEL reboots the computer as one would expect. When I boot using an old kernel (a leftover from 10.04 I think) via GRUB the system boots normally. What can I do about this? My laptop is an HP Elitebook 2730p. According to the specs it uses an Intel GMA 4500MHD for graphics. I am using the 64-bit version of Ubuntu.
View 5 Replies
View Related
Oct 20, 2010
I applied Power Management settings to put my computer to sleep in the hope that it would only sleep when it wasn't downloading something in Deluge. Unfortunately it would seem that it puts the computer to sleep despite Deluge being active. No biggie I thought, I'll just disable the sleep settings my setting them both back to NEVER. However, it ignores my new settings and still puts the display / computer to sleep, at the exact times I set originally!
View 7 Replies
View Related
Nov 21, 2010
I need to set the resolution of my display to 96 dpi.
The command that used to work was
$ xrandr --dpi 96
In Maverick, this gives me
[code]....
View 3 Replies
View Related
Oct 15, 2010
It's the fourth time now since Maverick that I had to cold reboot my system because it was totally unresponsive. The system monitor in my taskbar shows 100% on the background blue graph (I guess that's just one core then) and almost nothing on the other core. On the last freeze I managed to open 'sudo top' before it went totally unresponsive and saw that there was no high CPU usage at all, but a load average spiking above 24. Also the swap seemed to be full although my machine usually never uses swap. I was watching a movie with VLC this time, but I'm not sure if VLC ran the other times my OS froze. I made a snapshot with my cell phone: [URL]. How I can prevent a process from causing so much load?
View 6 Replies
View Related
Nov 10, 2010
Since I upgraded to Maverick, every now and then (maybe once an hour) my system becomes very slow for about half a minute. The mouse cursor reacts only very slowly and also applications freeze for for some time.
This happens without the CPU being on full load or the hard disk being active.
I made a clean ubuntu installation on a new hard drive a week ago, but the problem persists.
I have a Thinkpad R400 with an Intel GMA 4500 graphics card an an Intel T5670 Core 2 Duo processor. I'm running the most up to date stable version of ubuntu. Kernel 2.6.35-22.
I know the description of the problem is very vague, but it's hard to describe it more accurately. I couldn't find anything helpful on google or the forum. If you have any ideas what might cause the problem or which log files might provide useful information, please let me know. Most importantly, the problem did not occur before I upgraded to Maverick.
View 5 Replies
View Related
Jan 28, 2010
I am using GeForce 7600 GSNot using the Nvidia X driver message you know... I searched all over, and seen this problem on many searches but no resolve issues.I want to be able to connect my tv, I use to be able to when I first installed Ubuntu and now IdK.
View 3 Replies
View Related
Oct 18, 2010
I have a Konica 2530DL colour laser and have used it with versions from 6.06 onwards.
However now, with 10.10 I find I cannot print at from most apps eg OpenOffice or PDFs. I get errors on video frame showing on the printer but nothing obvious on the PC.
Test print and gedit text prints works fine and so does using a VM with Lucid running on the same host prints fine too from anything.
Can't see any other comments about this problem anywhere but I know the printer is fairly common and has worked well with Linux in the past.
Using it with IP printing on port 9100 and allow the installation to detect and select the driver. Not setup anything clever and I have the same issue with a Lucid upgrade to 10.10 or a clean install. However the VM running Lucid prints fine. Must be something changed on Maverick somewhere.
View 1 Replies
View Related
Nov 8, 2010
I have several machines which have been dual booting Ubuntu and Win for a couple years. Not much problem with setting them up, and Ubuntu has been trouble free. With this Maverick release, however, I've had quite a bit of trouble. Having trouble characterizing the flakiness, but it persists on this machine as follows ...
I did a clean install of the 10/10/10 distribution, dual booting with Win 7. Seemed to install OK and boot up once, although there might have been small problems during install, causing me to start over clean. Machine is relatively new AMD X4 940, with ATI HD 4800 video. The first flaky thing is that Sometimes (>50% of the time) the USB keyboard and/or mouse don't work (locked up). Sometimes one does, but not the other, sometimes neither work. I can't characterize why, but rebooting sometimes fixes it. The Win 7 environment is fine.
The second flaky thing is that after the initial boot to the graphical desktop, more often I boot to the black login screen. By reading this forum, I've found that "sudo service gdm start" usually starts the graphical desktop (although mostly with the mouse and or kbd frozen). This is a clean install, with the proprietary ATI driver added. I am dismayed, because this is so different from my earlier experience with Ubuntu. Don't know if these problems are somehow linked, or quite how to proceeds. Just looking for more stability.
View 6 Replies
View Related
Oct 12, 2010
I upgraded from 10.04 to 10.10 Worked fined, but suspend doesn't work anymore. When I click suspend, a tty1 terminal screen appears, exactly as you would hit ctrl+alt+F1, with the exception that no input is possible. I'm a newbie and an Ubuntu fan but I absolutely have no idea how to solve this...
View 5 Replies
View Related
Feb 12, 2011
I'm trying to get a fresh install of Ubuntu 10.10 working with the closed Nvidia driver, as I would like to get the HDMI output working.
I have a Sony Vaio VPCCW18FX, with a Nvidia GT 230M graphics card. The open source nouveau driver works fine, but does not run smoothly. The only problem here is that it's needed to run with "nomodeset".
If i just activate the Proprietary Nvidia driver and reboot, it will hang after writing "Checking battery State [ok]". I have tried to add EDID from Windows partition, and here it hangs at a blank black/grey screen. I have tried hooking up an external display, no output on it either.
View 9 Replies
View Related
Aug 8, 2010
Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?
View 2 Replies
View Related
Dec 10, 2009
I reinstalled fedora the other day, and it's been working just fine, apart from the internet. It shows that I have a full connection with the wireless network, but it's really difficult to actually load a page. 80% of the time it just fails and shows "Page Load Error". It's really frustrating because it is connected to the internet. In fact, the icon in the address bar even loads from the site I try to access, but websites just will not load.
I've tested my wireless internet with another laptop which is running vista, and it works perfectly on that. Also, I'm running Fedora 10 on an Acer Extensa laptop.
View 2 Replies
View Related
Jul 9, 2009
Everything was going fine. Once, I started my fedora 10 and I found out that no wireless driver is installed!!!
How can I check for this and fix this problem.
P.S. I am new to linux.
View 4 Replies
View Related
Apr 15, 2010
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
View 14 Replies
View Related
May 20, 2010
Very new to linux, just downloaded Ubuntu 10.04 and installed it, dual boot, no problems with initial installation.
Trying to install graphics card driver for:
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GTS 512] (rev a2)
Using Administration -> Hardware Devices
I selected the recommended driver and clicked activate. Download started then failed with error message:
SystemError: Failed to fetch http://gb.archive.ubuntu.com/ubuntu/...ntu3_amd64.deb Connection failed [IP: 91.189.88.30 80]
Screenshot attached.
Tried several times now and the download doesn't even seem to start any more.
My Internet connection is 3 mobile broadband, which may have something to do with it, bit it seems to be working well at the moment.
View 1 Replies
View Related
