Ubuntu Networking :: Installed Broadcom STA Wireless Driver In 9.10 But Still Can't Get Online
Jan 14, 2010
Installed 9.10 side-by-side with Vista, then installed the Broadcom STA wireless driver, rebooted to activate it no luck, no connection, neither wireless nor wired. Did this several times. Getting online in Vista works fine.
Here's the system I'm using:
HP tx2500z laptop
Vista Home Premium SP1
AMD Turion X2 Dual-Core Mobile processor RM
ATI Radeon HD 3200 graphics card
Broadcom 4322AG 802.11a/b/g/draft-n WiFi adapter
Realtek RTL 8186C (P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
View 4 Replies
ADVERTISEMENT
Jan 9, 2011
I have an Acer Aspire One D255 netbook with opensuse 11.3 installed and after several painstaking days of tinkering I successfully installed the broadcom wl drivers, and now my wifi card is operational. However, i can connect to my wireless network, but still have no internet access. I have searched the forums and google for a solution but most issues I have found that are similar to mine have been resolved once the wl drivers and firmware where installed
View 2 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Apr 29, 2011
In Ubuntu 11.04 32-bit
Dell Studio 1558
Everytime I want to active it I got the following: installation of this driver failed. have a look at the log file for details: /var/log/jockey.log I don't know if this is related to Software Sources, I only have Canonical Partners and Independent. I installed Ubuntu 11.04 from an ISO file and used the whole disk
View 3 Replies
View Related
Jul 29, 2011
i have windows vista with a broadcom 802.11g network adapter.I dont know much about computers but i would like to know how to install it on the ubunto OS so i can use internet ?
View 2 Replies
View Related
Feb 4, 2010
I am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :
Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log
[code]....
View 9 Replies
View Related
Jul 4, 2010
The Hardware Driversscreen shows that it needs the driver for it and when I click "activate" it tries to download it. This doesn't work because neither my ethernet nor wireless cards work.
View 4 Replies
View Related
Jul 1, 2011
sent the following email to Broadcom [URL]. I'll post an update if I receive a response. The current Linux STA 802.11 driver causes my system to crash.I've verified this under Ubuntu 11.04 and Linux Mint 11(an ubuntu derivative). Oddly enough, everything worked find under Ubuntu 10.10. My chipset is the 4321, my CPU is an AMD Phenom II 920, and the motherboard is an ASUS M3A78-EM. I tried the STA driver that ships with Ubuntu as well as compiling the one at [URL], including the patch for kernel versions > 2.6.37.
I am confident that the linux driver is the problem. If I connect my machine to my router using an ethernet cable, everything works fine. Also, the wifi adapter works fine under Windows. The symptoms are that the wifi adapter appears to connect to my network correctly and works fine for short transfers. But when I try a larger transfer, such as a speed test or streaming an mp3, one of three things happens after about 5 to 10 seconds:
1) The screen remains in graphics mode but locks up, including the mouse pointer. No keyboard input has any effect.
2) The screen goes into text mode and repeats the following over and over: [435.610002] ehci_hcd 0000:00:13.2CI-DMA:Out of IOMMU space for 18 bytes.
3) The screen goes into text mode and prints what appear to be CPU register contents. I took a picture of this with my phone if it will help, but obviously the text is kind of hard to make out.
View 5 Replies
View Related
Jan 2, 2010
I have a Dell Inspiron E1505, which has the Dell Wireless 1505 (Broadcom) card. To run the card, I installed the Broadcom STA wireless driver, which seems to activate the wireless card OK. The problem is that once I installed that driver my onboard Ethernet card was deactivated (and yes, it is enabled in BIOS). I had to remove the wireless driver to get the Ethernet back. Does anyone have ideas? I haven't found this problem listed elsewhere. I am running Ubuntu 9.04 with no other problems.
View 5 Replies
View Related
Aug 2, 2010
I have Ubuntu 10.04 installed and can browse the internet via cable, but wireless isnt working. My wireless driver is "Broadcom 802.11b/g WLAN".
In the windows device manager, I found the corresponding inf file to be oem20.inf which I tried to install it through "Setup Windows Driver" but it gave an error saying invalid driver. I also tried installing the Broadcom STA driver, but that didnot help.
I am dual booting with Windows 7, and i installed ubuntu through the windows wubi installer. My laptop is HP Pavilion dv4. I have installed the regular Ubuntu desktop and have made all upgrades. The results from lspci command i have added below.
gowda@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
View 2 Replies
View Related
Nov 9, 2010
Update 29/04/2011 The new broadcom driver is included in the 2.6.38 kernel that comes with Ubuntu 11.04 Natty Narwhal I suggest everyone to just upgrade to the new version. Update 07/01/11 user some-one the problem with git sources has been solved. At the moment the only commit version that compiles in 10.10 is this one:[URL].. Download the .tar.gz file in your home directory and extract it.
[Code]...
View 9 Replies
View Related
Aug 27, 2010
So I just recently migrated from Vista to Linux, I'm running Ubuntu Studio 10.04 on a HP Pavilion DV6700 with a Broadcom BCM 4312 b/g frequencies wifi adapter. I followed one guide telling me to use the hardware drivers program to activate Broadcom STA wireless driver, but whenever i attempt to do so it says "SystemError: InstallArchives() failed". Can anyone help?? (BTW i am not that adept with the Linux operating as of yet)
View 3 Replies
View Related
Jun 29, 2011
I installed Ubuntu 11.04 on an Acer Travelmate 290E computer. The installation went fine and everything was up and running until I wanted to use the wireless.
1. I got the "firmware not installed message" and installed the Broadcom b43 firmware.
2. I receive a new message: " wireless is disabled by hardware switch" (My acer does have a wireless switch that is switched to on.
3. After hours of research I tried to install Acer ACPI but my laptop model is not supported. I assume Ubuntu knows my wireless is there but thinks it is turned off, and the wireless switch can't communicate to Ubuntu properly.
I have already tried rfkill and all that good stuff. Doesn't work for me, Wireless is still hard blocked.
View 3 Replies
View Related
Jul 20, 2010
I've read a lot about wireless network cards but I haven't found something similiar to my problem. I've a belkin wireless card F5D7000tt and its driver bcmwl5.inf. I think I've correctly installed it because when I use "ndiswrapper -l" i get:
WARNING: all config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future realease.
bcmlw5.inf: driver installed
device (14E4:4320) present (alternate driver : ssb)
But when I go to Hardware Drivers I see that "Broadcom B43 wireless driver" is not enabled, and when a try to enable it I get an error message:"We are sorry, but the installation of this driver failed. Check the register archive to see more details: /var/log/jockey.log"
View 6 Replies
View Related
Oct 26, 2010
I have no internet available, but the driver seems to be installed (kernel driver r8169). I'll follow the steps for posting on the wireless forum this time:
1) I'm using a desktop. Intel Core i7-870 2.93Ghz 8md Quad Core. Motherboard is an ASRock H55M-LE LGA1156. 4GB RAM DDR3.
2) The wireless card is:
p { margin-bottom: 0.08in; } 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: ASRock Incorporation Device 8168
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at c800 [size=256]
Memory at cfdff000 (64-bit, prefetchable) [size=4K]
[Code].....
View 9 Replies
View Related
Mar 30, 2011
Before I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
View 9 Replies
View Related
Jan 26, 2010
I can't get the wireless to work on my laptop its a hp Pavilion dv9700 it has a Broadcom 4321AG 802.11a/b/ g/draft-n Wi-Fi Adapter i cant seem to get it set up.
View 6 Replies
View Related
Jun 13, 2011
When I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies
View Related
Aug 5, 2010
I've just installed Ubuntu on a new netbook, getting rid of windows in the process. I had tried it on another computer, installing it alongside Windows, and liked it enough to want to install it fully on my new netbook. I followed instructions, downloaded it to a USB stick, and then installed it as per the instructions on the Ubuntu website. All seemed fine until I tried to connect to my wireless network, when it appears there is no wireless driver. I tried plugging in the ethernet cable, but it just disconnects me every time I try to go online.
View 14 Replies
View Related
May 23, 2010
I decided to use the STA wireless driver in my Ubuntu 10.04, and my connection actually became faster! Only problem is that it keeps on asking for my wifi password. I didn't have this kind of problem when I was using the b43 wireless driver - it just automatically connects everytime I reboot. how I can make my laptop stop asking for my password everytime I reboot?
View 3 Replies
View Related
Jan 20, 2010
My Broadcom STA wireless driver has failed to installed. The error report says that "PLEASE HAVE A LOOK AT THE LOG FILE FOR DETAILS: /var/log/jockey.log WHAT SHOULD BE DONE TO GET THE WIRELESS STA driver functional.? Gotta see it functiioning back!
View 5 Replies
View Related
Jun 19, 2010
installing the Broadcom Wireless LAN driver. I am working from an HP Pavillion dv6-2 2150us (if that has any relevance). The problem seems to be with the installation method I have used. I burned the ISO file properly onto a CD, but I did not install through the disk boot-up method. The reason for this is because I couldn't partition my HDD correctly (I am trying to dual boot with the Windows 7 OS already installed). So, I installed Ubuntu via the option from the CD Installer through Windows 7. I am not sure how to go about getting and installing the Broadcom Wireless LAN driver onto Ubuntu.
View 1 Replies
View Related
Jul 10, 2010
After successfully installing Ubuntu Karmic on a friend's MacBook 3,1 I tried to get the wireless working. On the Live CD, the Broadcom STA driver worked fine, but now that I've finished installing, I'm having problems. The driver is installed, but Hardware Drivers says it isn't enabled. I try to activate it, put in my password, and the "Enabling Driver" dialog pops up for a split second, disappears, and the driver doesn't get activated. I've tried Google to no real avail.
View 1 Replies
View Related
Feb 17, 2011
I have this PC that came with W7 installed..i am removing it to install Debian Squeeze.I already have burned the 8 DVDs plus the Squeeze Kde CD.AFAIK, BCM 4312 is a proprietary driver, not shipped with Squeeze, but present as source in Unstable..I have already downloaded the files also... will the built *.deb be enough to enable my wireless, or to i still have to do it by hand. remove confilicting modules, build the module, insert it, put it in the corresponding filder. does the deb install do all that, or do i still have to do it, "the good 'ol way"?
View 4 Replies
View Related
Sep 10, 2010
"Broadcom would like to announce the initial release of a fully-open Linux driver for it's latest generation of 11n chipsets. The driver, while still a work in progress, is released as full source and uses the native mac80211 stack. "
View 4 Replies
View Related
Apr 20, 2010
Im making plans to buy a 15" Dell Inspiron notebook as it's currently the cheapest 15" notebook which is available in my country, and from what I have read, the Dell WiFi card used in the notebook is Broadcom based, and that Broadcom had recently released hybrid drivers for their cards. Now, after browsing through OpenSUSE's HCL [URL] it seems that a patch to the drivers is needed.how do you patch the driver? Do you just go to <extracted driver directory>/src/wl/sys/wl_iw.c and just throw in this whole chunk of text anyway into the file, or is there something more to it?
Code:
@@ -580,6 +580,7 @@
range->enc_capa |= IW_ENC_CAPA_CIPHER_TKIP;
range->enc_capa |= IW_ENC_CAPA_CIPHER_CCMP;
range->enc_capa |= IW_ENC_CAPA_WPA2;
[code]....
View 6 Replies
View Related
Jul 19, 2010
From my lspci output I get Broadcom 4313 and 0x14e4:0x4727It appears that Broadcom supports this card with their Linux STA driverBroadcom.com - 802.11 Linux STA driver guess on that page mine is 4313 2.4 Ghz 0x14e40x4727 Dell 1501even though my notebook is Toshiba.Then they say that the driver is included with Fedora and Ubuntu but nothing about OpenSuse. Then they go on about compiling the driver myself. I'm pretty sure the modules required for compiling drivers are not available on a fresh install and without Internet connection.Is there an easier way to get the driver? Could someone knowledgeable make some .rpm that I can download on another machine and put on a USB stick? Or do I have to wait until Suse developers get to it?
Or could someone make wl.ko file they are talking about on Broadcome Readme? It looks fairly easy to install the driver, if I knew exactly what to disable/blacklist and what security module to load.Another thing I got from dmesg, not sure if it's of any help, was that for this card pci entry that goes like 07:00.0 there's "support D1 D2", then "#PME supported from D0 D3hot D3cold" then the next line "#PME disabled". I've searched this forum but the only time 4313 was mentioned when someone made a mistake with the model number
View 9 Replies
View Related
May 27, 2011
How to use the BRCM driver for this following wireless cards?
BCM4313
BCM43224
BCM43225
Seems the since the 2.6.37 kernels it would be included. And wouldn't be necessary to use Broadcom STA linux driver anymore.
View 2 Replies
View Related
Sep 15, 2011
Broadcom wifi driver working only with Kernel-default, any way to get it work with desktop-kernel 3.1rc/3.0?
View 6 Replies
View Related
Jun 22, 2009
I have a laptop and a Broadcom 4322AG Wireless adapter in it. I am using Fedora 11 64 bit Live. instructions to install and configure my internet connection in Linux. I dont know how to install drivers in linux though I have Got a 64 bit driver from Broadcom Website. In windows, my internet connection doesnt need any password to access. It get connected to internet when I turn on wireless.
View 14 Replies
View Related
