I'm going to install and dualboot pinguy os with my current install of Ubuntu 11.04.I'm stuck on the advanced partitioning part, how do I give Pinguy a 30GB hard drive?And does this involve creating a new partition table?
View 9 Replies
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies View RelatedI have a 250 gig usb hard drive. I would like to install Mandriva and Open Suse 11.3 on it, is this possible and how do I get the systems loaded. I got Mandriva installed, but when I tried Open Suse it trashed my Mandriva, i.e. I couldn't boot into it.
View 2 Replies View RelatedI have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies View RelatedI am buying a new laptop and am curious about dual booting it. I currently run Ubuntu full time, but will need windows for a few applications. (there are no cross over applications to do this)
When you put both windows and ubuntu on a computer do you share the hard drive? Meaning would I be able to access all my music in windows and then restart my computer-run ubuntu, would I have access to all the files?
I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
View 9 Replies View RelatedI just found out about Linux and well I love it, it's fast, sleek and easy to use design make it rise above the competitors. So this is where I'm at. I have the latest version of Fedora on a thumbdrive and I when the thumbdrive is plugged in and I turn it on it boots up Fedora, but everytime I turn it off I lose all data and I start a fresh session. So when I got to instal Fedora to my hard drive. [URL]
Now I read a few articles on how to do partitions but, all of them want me to put in the original windows 7 instal cd/dvd into my laptop and somehow partition. But here's the thing I'm on a Compaq Mini real solid computer I love it but thats beside the point. What it really comes down to is how I do I get this dual boot working without having to reset everything and pretty much is there alternative for partitioning.
I bought a new laptop having the following specs:Processor: Intel I5RAM: 6GBHD: 500 GBVideo card: nvidia with cuda with 1 GB RAM.My Hard Disc already has 3 partitions: C=448 GBs (where windows 7 is installed=64 bit) D:Recovery (16.5GBs) and E:HP_TOOLS (99MB).I want to have dual boot and install linux also. BUT I dont want to delete the other partitions as well. How do I do that?Am I able to shrink C partition without disturbing windows installation and creat another partition in C drive? What it will be called: Primary or logical partition?
View 3 Replies View RelatedI have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View RelatedI referred to this video, to install ubuntu(NOT on windows partition) and also run windows XP, and im well enjoying ubuntu. i have some hard-disk issues, and i'm going to format the whole hard-disk. I will format and repartition using windows xp installer. I'm leaving 20 GB for ubuntu. So I can install ubuntu in 2 ways...
1) While re-partitioning, i can leave 20 GB unallocated and later put ubuntu there
OR
2) Install windows XP the normal way, and then allocate 20GB for ubuntu using GPART - by shrinking a windows partition. (as shown in video)
It's pretty much as simple as that. I am simply wondering if anyone knows of a tutorial of some kind or can explain how to partition around, in order to exclude bad data blocks on a busted hard drive. This is on a computer I just set up to run Karmic Koala. On another forum someone mentioned that there is a way to do this, and that is the only way, to my knowledge to "fix" said hard drive.On a complete side note, does anyone know if an Intel 965 is supposed to work with Karmic out of the box, if you will? I haven't gotten a chance to check it specifically for this, and there seems to be no mention of this chipset with Karmic on these forums.
View 2 Replies View RelatedHave just installed Ubuntu Server 10.04 on a dell with a perc 700 raid card. Running a mirrored raid1 (2x 500G as one drive). All went well. Have installed a basic Gnome front end and Webmin. I want to partition the hard drive into system and data storage areas. What is the best way to do this with a mirrored RAID system?
View 5 Replies View Relatedcreate a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
View 3 Replies View RelatedI have installed Fedora 14 along with Libre Office along with some other applications so I am learning slowly, re-learning really. However I am having a difficult time understanding partitioning. I would like to make another partition for Windoze. I also cannot get a USB mouse to work. I have run some commands to gather disk info I will refrain from list it here as it is a lot of data. At least until asked to do so. What I have run so far is fdisk -l, df, blkid, & cat fstab.
View 8 Replies View Relatedi have a 1 TB external hard drive and i have created 4 partitions as 3 of 300 GB , and one of 100 GB and i have format it as FAT but it is not showing 4th partitionand when i use fdisk -l it shows it as linux partitions and they are mounting in linux onlywhen i use the drive in windows , disk is not able to mount
View 3 Replies View Relatedif I make more partitions rather than creating single one, will I get more data access performance? E.g Instead of keeping 1,5TB partition, create 5x300MB and keep different data in different partitions? Logically hard drive will spend less time on finding data in smaller partition then in bigger one, right? Is there any statistics for performance vs size?
View 6 Replies View RelatedI have only known about Linux software for the past couple of weeks. I want to install Ubuntu 10.10 on an older desktop I have so I can become more familiar with it. I am average in knowladge about Windows OS and MS-DOS. I tried to install Ubuntu and I get an error message about the harddrive. The CD I am booting with will load on my other PC with Windows XP on it. I have only let it run on it long enough to verify that it is bootable.
I have made a floppy boot disc following the instructions on another Linux site about Ubuntu. I have also tried to boot my alternate PC with the floppy and it boots up. The harddrive on my working PC is a Maxtor 40gb formatted with NTFS file system. The harddrive in the older desktop is a Western Digital 80GB WD800LB-55DNA0.It worked fine with Windows XP on it. I also made a Western Digital DATA Lifeguard for DOS floppy and it boots with it.
how to format a single Ubuntu hard drive - no partinioning at the moment.
View 4 Replies View RelatedMy friend and I were discussing partitioning and we disagreed on repartitioning when the drive was full. How full is too full before partitioning will mess up your file system? I've partitioned before but it was only after the OS was installed, so only about %5 of the drive is being used. I read that 90% or more is too much. My friend claims it doesn't matter, and you can repartition even if the drive is 95%+ full.
View 1 Replies View RelatedI have a 1TB segate hard drive. I want to partition that hard drive for open suse for installation. What would you consider to be the best size method for partitioning?
View 4 Replies View RelatedI have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.
The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?
I finally have decided to give ubuntu a shot.Windows is becoming too familiar, and it's been forever since I have used command line since DOS.I really need some humility, and I think that Linux will teach me some.I am going to give it a whirl on a "spare" machine, dual booting with Windows 7 64 on two separate hard drives. I'm burning the ubuntu live cd x86 right now. I am going to unplug my windows drive and start the installation.
View 9 Replies View RelatedI am finding it hard to get 2 seperate hard drives to work each having different OS..... windows XP and Ubuntu 10.10. Making Ubuntu the master, it can recognise the drive but cannot boot from it. If XP is the master it does not recognise the Ubuntu drive at all.
View 3 Replies View RelatedI have been messing around with the ubuntu family for some time now, and usually have no problem finding my answers. This one, however, is giving me some trouble. I have been using ubuntu on my laptop for some time now, and recently got a new 2TB hard drive for my desktop. I cloned the old hard drive to the new one, and decided to install ubuntu onto a third drive. The third drive was IDE, the new one is SATA. I disconnected the other hard drive, and so my current set up is a SATA drive with Windows 7, and an IDE drive with Ubuntu (11.04 of course)
Well, I am unable to dual boot between the two, unfortunately, and would like to figure out how. I would like to say the problem is with Windows, since that is the primary drive. No GRUB shows up upon booting when both drives are plugged in, and the Windows Bootloader does not show my installation of Ubuntu, instead it goes right to Windows.
I have managed to get a system going where I have kubuntu installed on a partition of my external hard drive. When the ehd is plugged in, everything works well. I have the option to boot into vista (my main os) or kubuntu. However, I see no reason why it won't let me have some kind of fallback mechanism that would let me boot into vista if the ehd is not found, instead I end up with the grub rescue prompt.
If not then I'm going to have to look at other options, perhaps booting into vista by default unless I hold down escape or whatever other key my bios expects to override, because there will be times that my ehd won't be plugged in. This is the only little niggle, as apart from that everything is working great.
I have two 3 hard drives, one with Linux Mint, one with Fedora, one with Windows. For some reason, I can only choose Mint or Windows in the menu at the start. Also, when I boot on mint, I see my hard drive with Windows:
320 GB Hard Drive: 320 GB Filesystem.
But for the hard drive with Fedora I only see:
1.0 TB Hard Drive: 524 MB Filesystem.
From Mint I can go in this filesystem and there is a folder name Grub, can I take the info there and paste it into Mint's grub ? If so, how ?
I installed a new hard drive to my system. I use a program called R-Drive image to copy all my os to my new drive. It done a pretty good job too, its an exact copy. I deleted the old one. But obviously now I cant boot. I had a look at the menu.lst file i dont know what to change it to. heres my drive setup,
C: - Windows Vista - Ubuntu
D: - Documents - Swap File
E: - Games
How to put ophcrack on linux because of my supposed intentions of plugging it in waiting 20 mins and cracking passwords wherever people do this I know having to waste my space triple booting the thing with Ophcrack XP/Vista and BackTrack. How does one go about dual booting a flash drive? I could not find much on the internet.
View 1 Replies View RelatedI did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted. I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive. However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message I am given means I think it could be trying to fchk it. Do I need to do something more like remove /dev/sdd?
View 2 Replies View RelatedI have a Sony VAIO AR series, it contains two separate 120GB hard drives that were originally configured in a raid. They're called hd0, and hd1. I disabled the raid and partitioned hd1 in 3 ways, one medium sized partition for the operating system (ext4), one large partition for storage (ext4) and one small partition for Swap space. I then installed Ubuntu onto hd1 with help from UNetbootin. After installation went fine I loaded up Windows installer, created two NTFS partitions, one medium and one large, and installed Windows 7 of the medium sized partition. Now I can't figure out how to boot into the Ubuntu side on hd1. Needless to say, in Windows, hd1 is not visable at all. I can see my two NTFS partitions fine.
When booting up I go through two main screens. The first screen "Matrix Storage Manager Option ROM," lists the physical disks (0, and 1.) and gives me the option to enter configuration with [cntrl+i]. The second screen gives me a list of options to boot from, Yet they are all Windows options and many are redundant. The list includes "Enter Command Line," which when selected tells me "Boot failed! Press any key to enter command line." command line brings me to "grub>" I tried booting Ubuntu from this command line, but don't have much to work with here. I followed this guide, but it didn't take me to completion and I'm not sure where to go from here. http://www.mepis.org/docs/en/index.p...m_command_line
[Code]...
