Hardware :: General Partitioning Limits - Hard Drive Almost Full
Dec 5, 2009
My friend and I were discussing partitioning and we disagreed on repartitioning when the drive was full. How full is too full before partitioning will mess up your file system? I've partitioned before but it was only after the OS was installed, so only about %5 of the drive is being used. I read that 90% or more is too much. My friend claims it doesn't matter, and you can repartition even if the drive is 95%+ full.
View 1 Replies
ADVERTISEMENT
Jun 22, 2011
create a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
View 3 Replies
View Related
Mar 3, 2011
if I make more partitions rather than creating single one, will I get more data access performance? E.g Instead of keeping 1,5TB partition, create 5x300MB and keep different data in different partitions? Logically hard drive will spend less time on finding data in smaller partition then in bigger one, right? Is there any statistics for performance vs size?
View 6 Replies
View Related
Jan 22, 2011
I have only known about Linux software for the past couple of weeks. I want to install Ubuntu 10.10 on an older desktop I have so I can become more familiar with it. I am average in knowladge about Windows OS and MS-DOS. I tried to install Ubuntu and I get an error message about the harddrive. The CD I am booting with will load on my other PC with Windows XP on it. I have only let it run on it long enough to verify that it is bootable.
I have made a floppy boot disc following the instructions on another Linux site about Ubuntu. I have also tried to boot my alternate PC with the floppy and it boots up. The harddrive on my working PC is a Maxtor 40gb formatted with NTFS file system. The harddrive in the older desktop is a Western Digital 80GB WD800LB-55DNA0.It worked fine with Windows XP on it. I also made a Western Digital DATA Lifeguard for DOS floppy and it boots with it.
View 14 Replies
View Related
Sep 11, 2010
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies
View Related
Nov 13, 2010
Found what takes space but not sure what to delete here is the output of df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 9.2G 157M 8.6G 2% /
/dev/sda5 9.4G 9.4G 20K 100% /usr
/dev/sda6 213G 213G 20K 100% /var
none 1.0G 12K 1.0G 1% /tmp
tmpfs 2.0G 0 2.0G 0% /usr/local/psa/handlers/before-local
How to identify what to delete to clear up space?
View 9 Replies
View Related
Jun 28, 2011
I have installed Fedora 14 along with Libre Office along with some other applications so I am learning slowly, re-learning really. However I am having a difficult time understanding partitioning. I would like to make another partition for Windoze. I also cannot get a USB mouse to work. I have run some commands to gather disk info I will refrain from list it here as it is a lot of data. At least until asked to do so. What I have run so far is fdisk -l, df, blkid, & cat fstab.
View 8 Replies
View Related
Oct 15, 2010
i have a 1 TB external hard drive and i have created 4 partitions as 3 of 300 GB , and one of 100 GB and i have format it as FAT but it is not showing 4th partitionand when i use fdisk -l it shows it as linux partitions and they are mounting in linux onlywhen i use the drive in windows , disk is not able to mount
View 3 Replies
View Related
Feb 15, 2010
It's pretty much as simple as that. I am simply wondering if anyone knows of a tutorial of some kind or can explain how to partition around, in order to exclude bad data blocks on a busted hard drive. This is on a computer I just set up to run Karmic Koala. On another forum someone mentioned that there is a way to do this, and that is the only way, to my knowledge to "fix" said hard drive.On a complete side note, does anyone know if an Intel 965 is supposed to work with Karmic out of the box, if you will? I haven't gotten a chance to check it specifically for this, and there seems to be no mention of this chipset with Karmic on these forums.
View 2 Replies
View Related
May 2, 2011
Have just installed Ubuntu Server 10.04 on a dell with a perc 700 raid card. Running a mirrored raid1 (2x 500G as one drive). All went well. Have installed a basic Gnome front end and Webmin. I want to partition the hard drive into system and data storage areas. What is the best way to do this with a mirrored RAID system?
View 5 Replies
View Related
Jul 21, 2010
how to format a single Ubuntu hard drive - no partinioning at the moment.
View 4 Replies
View Related
Jun 15, 2011
I have a 1TB segate hard drive. I want to partition that hard drive for open suse for installation. What would you consider to be the best size method for partitioning?
View 4 Replies
View Related
Mar 1, 2010
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies
View Related
May 16, 2011
I'm going to install and dualboot pinguy os with my current install of Ubuntu 11.04.I'm stuck on the advanced partitioning part, how do I give Pinguy a 30GB hard drive?And does this involve creating a new partition table?
View 9 Replies
View Related
Feb 9, 2011
I have the following inside /etc/security/limits.conf(I have specified root separately because * will not include it.)
user2 - core unlimited
* - core 0
root - core 0
[code]....
View 2 Replies
View Related
Jan 30, 2011
I would like to limit any process from using more than 500 MB of RAM. AFAIK this is done using RSS in /etc/security/limits.conf but the process called gnome-panel apparently is using 618436 kB of VmRSS. How can this be ?
/etc/security/limits.conf
* hard rss 512000
username@debian:~$ cat /proc/3002/status
Name: gnome-panel
[code]...
View 2 Replies
View Related
Aug 9, 2010
If this has been covered before I couldn't find it.
What I'm "Not" Asking... I'm not asking about installing the CD image to a USB hard drive to boot a live install version. I've done that to see is my computer will boot from the USB and it does.
What I want to do is this:
An actual hard disk install of full featured Linux to a portable USB Hard Drive. I want to be able to plug in the USB HHD and go Linux. (Why you might ask? Fair enough. The laptop is my wife's computer and she says absolutely no to Linux.
View 3 Replies
View Related
Jun 12, 2011
I have added no data to my hard drive in the last few days. I saw a notification saying I had only 1.8Gb left on my drive. Shortly after I dismissed it and ran: Code: sudo apt-get clean like the notification suggested. Then, another poped up. Now it said I have 0 bytes left.
So, I opened the disk usage analizer and the data seemed normal, and not my full drive size. It still was saying I have no space so I checked the properties widow for / . It said / contained 128TB of data and the file counter showed no signs of stopping after a few minutes. Obviously my drive is not 128TB in fact it's only 500GB. Also the disk manager program (system volume information?) Said it has 28 bad sectors.
View 4 Replies
View Related
Jun 22, 2011
if there was a way, to add a folder to a hard disk which was full of symlinks to a CD drive. This would primarily be a way to store offline media and a way to access it. I would still be able to browse the folder structure and see the files (but possibly not the sizes). I imagine something like this:
/archive/cd/cd1/photos/me.jpg > /mnt/cdrom/cd1/photos/me.jpg
Therefore I can see what files I have available, and I know which media to insert (in this case cd1) and I would then be able to view the files? Or if anyone has a better idea I'm open to it. Just to mention I don't have a GUI on this server, it is completely headless so any solution needs to be console based
View 1 Replies
View Related
Mar 17, 2010
I have a pc with windows on it, about 90% of the hard drive is full. I want to install dual
boot ubuntu with ubuntu using about 70% of the hard drive, do I need to manually create space, or can I just set during the install will ubuntu just over-write that much. I don't care about the files I have under windows.
View 1 Replies
View Related
Jul 13, 2010
I experienced a full hard drive yesterday due to a massive error_log. We took care of the errors, but later found out we were missing files, including a MySQL database table. Having a shopping cart and ecommerce stuff on the site, we found that some of those files were missing, too.Does RHEL 5 have some sort of feature for automatically deleting files when the partition is full? If it does, I want to turn it off.
View 4 Replies
View Related
Mar 8, 2011
I have a BIOS affected by 1024 cylinder limit ,,(Just to explain , the BIOS will recognize only 137GB no matter how big the HDD is (160/250/320/500))This problem doesnt affect the OS in any way --Linux can read the entire disk and so can WIN after SP1 of XP...This problem is only upto the point of MBR handing over boot instructions to Bootloader..In that case LiLo or Grub1 or Grub2 would fail if the kernel of the OS is after the 137GBI want to know if I can mix 2 partitioning schemes..Say use MSDOS partitioning till the limit of say 100 GB and for the rest 60 GB use GPT partitioning and install GRUB2 (as I read only GRUB2 supports GPT cleanly) ...Then , maybe I can do away with options of restricting /boot within 137
View 3 Replies
View Related
Aug 13, 2010
Whenever I'm dealing with large numbers of computers that need to have identical windows installations put on them, I love using Symantec/Norton Ghost to image the NTFS partition (just making the .gho file the size of the disk I've used, instead of the 160/320GB full volume size), and then uploading it automatically to a windows share.I'd love to be able replicate this exact process with Ubuntu. I have one computer that's ready to go, and a few dozen more that I'd like to quickly get that same image on.
I've heard that there's a command called dd that can make disk images, but I'd really like some sort of boot disk that can allow me to make an image, save it, then run the boot disk on another computer to allow me to reconnect to the server and dump that image on that computer. Ghost 4 Linux doesn't have a network/server component, I think.even if such solutions cost money, I'd love to know if they exist or not.
View 2 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
Apr 26, 2010
I disconnect my internal Windows hard drive first. Then run the installer from the Desktop CD. Everything works great.This is approximately the steps I take: I reboot, everything is good. I reconnect my internal hard drive, boot to Windows, reboot back to Kubuntu, everything is still good. I run updates and follow the instructions of the Comprehensive Multimedia & Video Howto. I reboot again, still no problems. At this point, I figure everything is OK and I have no worries. I boot to Windows and do some work in that environment. The next time I boot to the external Kubuntu hard drive, I get the following errors:
Begin: Starting AppArmor profiles ...
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
[code].....
View 6 Replies
View Related
Mar 28, 2011
To structure the layout of my partitions. I'm installing Windows 7, Backtrack 4 R2 and Ubuntu 10.10 Desktop on my laptop. I've got a 500 GB HDD named sda.
I've already installed Windows 7. It's my opinion that it's easiest to begin with Windows.
The partitions look like this right now:
The Windows installation is unencrypted and I want it to stay that way. It's only there in case my laptop gets stolen, I've installed various nasty things there.
The Backtrack 4 installation will also be given 100 GB space, I want it to be encrypted. The Ubuntu installation should get the rest of all the remaining space and preferably be encrypted but it's not 100% necessary.
How I should partition this? There's a limit on 4 primary partitions? How do I circumvent this? There should be one dedicated GRUB partition which will point to each of the installations own boot loaders?
View 8 Replies
View Related
May 12, 2011
I want to install Linux Mint 11 (just came out) to a USB drive. My USB drive is 34 gb. So I want to put a 1-2 gb partition on it and install mint just to that. Is that possible? I am a noob so I want to use [URL] but the screenshots don't show an option for a partition or state any extra steps that might be involved in doing this (there's a tutorial for doing this for one of the Ubuntus using fdisk, but I don't have any linux installs right now).
I've seen several tools for partitioning.
View 1 Replies
View Related
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies
View Related
Jul 31, 2010
This question is somewhat open ended, so I'll describe the specific issue, what I want to accomplish in general, and what I tried to do. It'd be a little long, but hopefully not too daunting.For quite a while my approach to multi-OS boots has been to install each OS to a separate disk. When I want to boot a specific OS I change the boot drive in the BIOS. I find this convenient for several reasons, but mostly because I don't get boot manager conflicts. If I remove a disk or change the OS on it, this doesn't affect the booting of other OS's.
Note that when I say multi-OS, this meant until now multiple versions of Windows. I've occasionally tried some linux distros on VirtualBox, but now I want to do a full install, and see if I can use it as a main OS. (What prompted this was the recent release of Wine 1.2 and the fact that my new job doesn't involve any Direct3D or DDI work. I've always been partial to the open source movement, but I'm also fine with Windows and never before felt I could make the move without losing key abilities). My plan was (still is, if I can get it to work) to use Linux for everyday e-mail, web browsing and such, play Windows games over Wine, and install Windows 7 in VirtualBox for Windows development.I currently have two disks, one with my main Vista x64 installation, and the other with a Vista x86 installation which I used for my previous job and I no longer need. This is the disk I want to use for the Linux installation. It has a lot of partitions but quite a bit of free space (since I copied a 80GB disk and 250GB disk into a 500GB disk and haven't taken advantage of the extra space).My first choice of distro was Linux Mint, since it's known to be friendly to new users, and I like the software installer on it. I installed Linux Mint in the past in VirtualBox, and the latest version also installed fine, and I found installation instructions explaining how to provide my own partitions, but the installation failed during the "configuring hardware" stage. If you're interested, more details are available in this thread on the Linux Mint forums. I didn't get any reply to that thread.
I thought then that I'd try openSUSE 11.3. The live CD looked usable enough, but when I tried to install I couldn't tell how to make sure that I don't get a boot manager which will try to give me access to the Windows versions on the disks. I don't want this, and what I'm really afraid of is that an install will screw the booting of Vista x64 on the other disk (which, granted, I can disconnect for the install, but I'd rather not). At that point I decided to post a question here.So hopefully you understand what I want to achieve. I don't much care which Linux distro I install, but I'd rather have one which gives me as much usability out of the box (or easily installable) as possible.
View 5 Replies
View Related
