Ubuntu :: Dual-booting - Can't Boot From CD - Install Through Hard Drive Into Another Computer
Jan 9, 2011
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies
ADVERTISEMENT
Aug 17, 2010
I have a 250 gig usb hard drive. I would like to install Mandriva and Open Suse 11.3 on it, is this possible and how do I get the systems loaded. I got Mandriva installed, but when I tried Open Suse it trashed my Mandriva, i.e. I couldn't boot into it.
View 2 Replies
View Related
May 16, 2011
I'm going to install and dualboot pinguy os with my current install of Ubuntu 11.04.I'm stuck on the advanced partitioning part, how do I give Pinguy a 30GB hard drive?And does this involve creating a new partition table?
View 9 Replies
View Related
Jul 23, 2011
I am buying a new laptop and am curious about dual booting it. I currently run Ubuntu full time, but will need windows for a few applications. (there are no cross over applications to do this)
When you put both windows and ubuntu on a computer do you share the hard drive? Meaning would I be able to access all my music in windows and then restart my computer-run ubuntu, would I have access to all the files?
View 6 Replies
View Related
Jun 15, 2011
UPDATE2: As of 2 weeks ago, it won't boot at all. UPDATE1: HDD booted OK, but I don't know how to copy the GRUB file. Could this be a hardware temperature problem? I have just replaced a Hard Drive, & had to reinstall XP & 10.04.2LTS from scratch, (it was a TOTAL failure) The system now will not boot into XP, or either of the 2 Linux kernels or the recovery modes, without several attempts. ( I'm using a LiveCD now.)
POST is good. GRUB loads, but when I select an OS, it powers off. Windows shows the splash for a few seconds, then shuts down. Yesterday, I was able to boot into Linux after booting into Windows, but today Windows won't boot either. On examining the GRUB menu (e) the first line in the Linux records is 'recordfail' I will attempt to boot from HDD now, & post the GRUB output here. EDIT: If I run MEMTEST first, up to Test6, it boots normally.
[Code]...
View 9 Replies
View Related
Jan 12, 2011
i installed Ubuntu 10.10 on our second hard drive, and i cant dual boot it. it is set as slave, so should i set it to master, or do i need to hit a key @ initial boot. ive gotten a list that shows vista on it, which is on C: , but not ubuntu, which is on F:.
View 9 Replies
View Related
Jul 3, 2011
I currently have a 160GB hhd running Ubuntu 11.04 and Windows XP, with the following partition configuration:
sda1 Windows NTFS (primary-active and boot and system)
sda5 Linux Swap (logical)
sda6 Linux Ubuntu ext3 (root)
sda7 Linux Ubuntu ext3 (home)
sda2 other
I have Grub2 installed, which provides me the choice at boot to start either Ubuntu or XP. This currently works fine.
I want to clone this hhd and transfer to a new, larger hhd, and have several questions, since I don't want to make a mistake with something so crtical. 1) Which software is generally considered the safest, most reliable and easiest to use (dd, Gddrescue, Clonezilla, Paragon, Macrum Reflect, Easeus, Drive Image XML, or something else)?
2) Which software will be able to copy and include both operating systems in the partitions to be cloned?
3) Will that software change the booting process or options in the cloned copy in any way? I've read where using Easeus corrupts Grub2 and thus requires re-installing Grub2!
Are there any other concerns, considerations or factors I need to consider in cloning the hhd; e.g. prior formatting an external hhd, and with what file system? I've also read where FAT32 would be the choice, but don't really know for sure.
View 3 Replies
View Related
Sep 1, 2010
I have ubuntu 10.4 installed in xp. Ubuntu tells me I have 50 gigs HD space yet the folder tells me I only have 700 mgs and I am getting a warning of not enough space on the computer. My question is. Is this due to windows claiming the space and not allowing enough to be used by ubuntu? If I delete windows and make this computer all linux will that help?
View 2 Replies
View Related
Oct 5, 2010
I currently have Windows 7 installed on my laptop and I would like to dual boot w/ Fedora on the same hdd.I have two NTSF partitions, I shrunk my D drive 50GB for ext4 & swap.I've tried both liveusb-created & unetbootin to create a bootable USB to install Fedora.Anaconda starts up and I get through most of the install configuration, I set up GRUB & the partitions. Once I proceed to the next screen I get missing ISO image 9660 error My laptop doesn't have a DVD drive. It seems like a lot of people are getting this error, but I have found no concrete solution though.
How do I put the image on the drive? Windows can't read ext4 and I haven't been able to find a program that can.I have a USB to SATA adapter that I could hook up a DVD-ROM drive too, but I don't know if fedora will pick up on it.
View 12 Replies
View Related
Mar 17, 2010
I have a pc with windows on it, about 90% of the hard drive is full. I want to install dual
boot ubuntu with ubuntu using about 70% of the hard drive, do I need to manually create space, or can I just set during the install will ubuntu just over-write that much. I don't care about the files I have under windows.
View 1 Replies
View Related
Jul 28, 2010
I would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.
View 5 Replies
View Related
Sep 29, 2010
I have Windows 7 x64 on a RAID0 Setup and have a separate 120GB Hard Drive and want to DualBoot with Ubuntu! How do I go by doing that seeing that LiveCD is not detecting Windows 7 Loader?
Twitpic : [URL]
View 3 Replies
View Related
Oct 23, 2010
I'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
View 2 Replies
View Related
Dec 24, 2010
I just got a new hard drive and need to transfer my dual boot window 7/Ubuntu 10.10 onto the new hard drive and be bootable. Is there an easy was to do this?
View 3 Replies
View Related
Jul 28, 2011
I was attempting dual boot my computer (ubuntu 11.04 and windows 7) and when I got to the stage to allocate drive space I accidentally formatted the largest partition of my hard drive to a linux swap. My computer froze while it was formatting the drive and I was forced to power off my laptop. Windows was my original operating system and was installed on the partition that is now formatted (or maybe not because of the crash during the formatting) as a linux swap. Therefore my windows no longer works and I cannot restore my computer for a backup because it wont let me restore it to the partition that is now a linux swap. Now when I boot from the linux install cd I get an error and am not able to install ubuntu or format/allocate drive space. Is there a way I can reformat and fix my harddrive so I can them restore windows.
View 9 Replies
View Related
Feb 23, 2010
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
View 6 Replies
View Related
Mar 1, 2010
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies
View Related
Apr 8, 2011
I have a Western Digital 1Tb WD10EAVS Caviar Gp Hard Drive. It does not have an operating system installed but it have alot of my important files. The hard drive began making a clicking sound and when I boot up my computer I see my other drives and the sata slot for that drive remains blank. Can any one help me recover or fix my hard drive
View 1 Replies
View Related
Oct 8, 2010
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
View 6 Replies
View Related
Dec 18, 2010
i can only boot to MSDOs with floppy msdos bootup on A:. I want to install ubuntu 10.10 and completely erase HDD but the ubuntu disc won't bootup even when bios is set for cd only. This is older HP pavillion that I have retired but HDD scans out good so I thought i would run Ubuntu only and maybe put MS out of business but not having any luck with install. When booting from HDD error is system 32hal dll is missing or corrupt but HDD C: is 0 anyway. I just want to install so I can play with Ubuntu.
View 14 Replies
View Related
Jan 6, 2011
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
View 9 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
Apr 4, 2016
I have spend way too much time on this and it still fails. I installed the debian 8.3.0 AMD64 CD1 iso image on an empty external USB 1TB Western digital My passport Ultra. I use the graphical install method and the installation process of Debian appears to go fine, except it informs me at one point I am missing some nonfree firmware for something with wifi, but that shouldn't relate to this.
*FYI I put GRUB on the external hdd, sdb in this case.
*windows 7 is on the internal hard drive and I excluded it from the boot sequence
* using laptop lenovo t410
I reboot my computer and it hangs with a flashing - in the upper right corner. Never even gets to GRUB. For awhile I thought I might have partitioned something wrong, but I am now convinced that isn't likely. I tried countless number of different partition configs. Separate /boot partition and I also tried using guided partitioning.
I mounted the partitions of the external hard drive using another OS and GRUB appears to be there. So it is there.
I know some Western digital hard drives have added priopertary firmware crap, so I tried installing on a external Seagate drive and it still hangs. I tried installing linux mint on the Western Digital drive and it works fine!
BIOS settings fine. USB settings fine. I tried booting via the boot menu and moving the USB HDD to the top of the list.
I also tried installing with Debian Live on a USB, but that actually has more problems for some reason. I can never get passed the partitioning phase because it fails to create /boot or /swap partitions saying something about how they are still in use and another thing about how the partition table hasn't been updated in the kernal yet.
It seems I might be having this same issue, not sure: [URL] ...
View 7 Replies
View Related
Mar 20, 2010
I have a 160Gig and a 40 Gig drive.I would like to install the system on the 160 Gig, and use the 40 Gig drive as a storage for backups or whatever.It appears in the installation process that I am required to use a mount point, which would then turn the drive over to the root system, which would not allow it to be totally available to me.I just want to format it to ext3 filing system.Coffeecat, if you are out there and see this, strange things are happening to the 40 Gig drive - it says it is using 2 gig, but it is totally empty of all system files, hidden files, trash, etc. and it is being imaged in the media folder in root. I believe I have messed this install up to the point of no return and think I should go ahead and start over.
View 5 Replies
View Related
Jun 2, 2010
my Windows partition and the future Suse partition will be on different HDDs, so this should ease things a bit. Suse is on HDD 2 and Windows on HDD 1 HDD 2 will be the default Master drive, so I want GRUB to give me to option to boot either on Suse, either on Windows 7 I want to keep Windows 7 boot manager intact. I.E. If I switch HDD 1 to the Master drive, it will boot directly into Win 7.
What I wanted to do is:
Unplugg Windows drive
Install Suse
Replugg Windows drive and manually add the entry to GRUB
if I keep them both plugged, Linux will not touch HDD 1 MBR?
View 9 Replies
View Related
May 6, 2011
i've just got my gateway laptop which has a recovery option. Due to my observation, the computer has 3 primary partitions when I firstly got it: 12.7 GB, whose property is system recovery (empty and hidden); 100MB whose properties are ACTIVE, primary partition; partition C whose properties are BOOT, system, primary partition, crash dump and page file. Seems that when the machine starts, it firstly read the 100MB partition and then it is leaded to the partition C, where the windows 7 is installed. I SHRINKED THE PARTITION C AND CREATED 3 LOGICAL DRIVES.
Now I want to install OpenSuSE 11.4 on one of my logical drives. What should I do to keep all things well, which means I will be able to dual-boot and also keep my recovery function well? What's more, what I do not want is that the windows 7 cannot be chosen at boot or neither of them can boot!
View 8 Replies
View Related
Aug 2, 2010
How do I install SDL (and other libraries) onto my dual-boot (XP/Xubuntu) computer? With only what came on the Xubuntu disk, I am able to play Oolite at what seems to be 1000 FPS, and Torcs at about 70 FPS.
View 6 Replies
View Related
Mar 29, 2010
I have a WinXP computer with two internal hard drives that are partitioned. I would like to setup a dualbooting system. I first attempted to install PC-BSD 8.0 from a DVD onto an external 640 GB USB hard drive. Everything looked it was going to work (including the boot loader program) until after the installation. PC-BSD took out the NTFS of the hard drive (with over 500 GB of Window files). And the bootloader never loaded on startup. It took two days to get everything back. The files created on this external hard drive could not be read by another linux operating system (Slax 6.1.1). I would like to load PC-BSD on one of my empty partitions (from my second hard drive). The manual for PC-BSD states PC-BSD has to be installed on a primary drive and not a logical drive. If you attempt a logical drive installation, PC-BSD will wipe out the entire hard drive on installation. Would it help if I format a logical partition to the linux file system and then attempt to install PC-BSD to it? I can use Slax 6.1.1 from a CD to format the logical partition.
View 1 Replies
View Related
Oct 7, 2010
We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
View 7 Replies
View Related
Apr 28, 2010
I have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.
The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?
View 6 Replies
View Related
