Ubuntu Installation :: Dual Booting 2 Separate Hard Drives?

Jul 10, 2011

I am finding it hard to get 2 seperate hard drives to work each having different OS..... windows XP and Ubuntu 10.10. Making Ubuntu the master, it can recognise the drive but cannot boot from it. If XP is the master it does not recognise the Ubuntu drive at all.

View 3 Replies


ADVERTISEMENT

Ubuntu Installation :: Dual Booting Windows On Separate Hard Drives?

Aug 25, 2011

I have been messing around with the ubuntu family for some time now, and usually have no problem finding my answers. This one, however, is giving me some trouble. I have been using ubuntu on my laptop for some time now, and recently got a new 2TB hard drive for my desktop. I cloned the old hard drive to the new one, and decided to install ubuntu onto a third drive. The third drive was IDE, the new one is SATA. I disconnected the other hard drive, and so my current set up is a SATA drive with Windows 7, and an IDE drive with Ubuntu (11.04 of course)

Well, I am unable to dual boot between the two, unfortunately, and would like to figure out how. I would like to say the problem is with Windows, since that is the primary drive. No GRUB shows up upon booting when both drives are plugged in, and the Windows Bootloader does not show my installation of Ubuntu, instead it goes right to Windows.

View 4 Replies View Related

Ubuntu :: Dual Booting With Windows 7 64 On Two Separate Hard Drives?

Feb 15, 2010

I finally have decided to give ubuntu a shot.Windows is becoming too familiar, and it's been forever since I have used command line since DOS.I really need some humility, and I think that Linux will teach me some.I am going to give it a whirl on a "spare" machine, dual booting with Windows 7 64 on two separate hard drives. I'm burning the ubuntu live cd x86 right now. I am going to unplug my windows drive and start the installation.

View 9 Replies View Related

Ubuntu Installation :: Dual Booting Windows 7 On Separate Drives

May 31, 2010

I have tried (a few times now lol) to get this setup. I am using Windows 7 64-bit and Ubuntu 10.4 64-bit. I have Windows 7 installed on one hdd, another hdd has the System Reserved partition along with a data partition for files, the third hdd is the one where I want to install Ubuntu. I have found numerous tutorials on installing them both on the same drive, but not on separate ones. The couple I have found haven't really worked.

I think that Ubuntu is installed correctly but there is no option to boot into it. Windows 7 just happily loads itself. I have tried reinstalling and selecting 'sdc1' (the native ubuntu partition) as the location for the bootloader to be installed and then used Easy BCD to add that location to the windows bootloader which gives the option to load Ubuntu but when selected dies complaining that there is a missing file (I think it just can't find the Ubuntu bootloader).

As an aside when I get to the installation screen the Ubuntu installer keeps on telling me that there are no operating systems detected on the machine (Even though I'm pretty sure the drive it is talking about 'sda' is where Windows 7 is installed). Not sure if that matters just seemed a little wierd.

View 7 Replies View Related

Ubuntu Installation :: Setting Up Dual Booting On Separate Drives?

Mar 4, 2011

I am using an Abit NF7-S V2 mobo to set up my dual boot system where each OS (XP & Ubuntu) will run on a totally separate HD (as opposed to both OS�s being set up on one HD). Since they will be running as stand alone boot drives, how does one set it all up so that one can boot from one or the other? I don�t see how I can do it from the bios. How do I do it?

View 2 Replies View Related

Ubuntu Installation :: Natty Dual Boot On Separate Hard Drives

May 29, 2011

I've been trying to properly install grub for the past 3 days and failing every time.I recently bought a new computer and would like to dual boot Windows 7 64 and Natty. On my previous machines, ubuntu installer has automatically detected windows. It does not do so on this machine.I have three hard drives: 2 ssd's and a single 3 tb drive for storage.

I would like one ssd for windows 7 and one for natty.Currently, I am able to boot into both OS's but only by altering the boot sequence of the drives from the bios. I am hesitant to install grub to the windows drive for fear I will lose the ability to boot into windows. I did this early in the discovery process and ended up having to reinstall windows.

View 9 Replies View Related

Ubuntu Installation :: How To Make Dual Booting Windows And Ubuntu From 2 Separate Drives Work

Feb 28, 2011

I am new to Linux and was wondering how to make dual booting Windows and Ubuntu from 2 separate drives work. I have dual booted from the same drive but never different ones. If I install Ubuntu on the second drive how will I configure the system to let me choose on start up?

View 3 Replies View Related

Slackware :: Dual-boot With Separate Hard Drives And Lilo?

Dec 16, 2010

After I complete a big project I'm working on I'm going to be wiping and re-doing my desktop machine, probably in the next day or three. I'm going to be setting up a dual-boot; my first in about three years. I'll be using separate hard disks for this, and installing Slackware second on the bigger of the two drives. When I've done this in the past I've used Grub; Is there anything I need to know or pitfalls I need to avoid doing it with Lilo?

View 5 Replies View Related

OpenSUSE Install :: Dual Boot Windows 7 / 11.3 Using Separate Hard-drives For Each OS?

Oct 7, 2010

We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).

Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).

W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.

There are plenty of postings re integrating W7 to the Grub-menu.

This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.

Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows

So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.

View 7 Replies View Related

Ubuntu Installation :: How To Dual Boot 11.04 And Win 7 On Separate Drives

Jun 4, 2011

I have Ubuntu 11.04 on 1TB HDD and Win 7 on another 1TB HDD. Right now I have to unplug a SATA cable to get to boot into one or the other. What is the best way to be able to pick. I don't care which OS I do it in or which is the primary, if there has to be one. I have an MSI mobo.

View 2 Replies View Related

Debian Installation :: Triple Boot On 2 Separate Hard Drives

Sep 16, 2015

I have an HP Elitebook 8540w with 500gb hdd running win7.I plan to replace my blue-ray drive with an ssd using a hhd caddy. The problem is that i want to keep my first hdd (win7) as it is, and install on the new ssd 2 operating systems:win10 and debian 8.

View 3 Replies View Related

Server :: 2 Separate External Hard Drives With ESata To Minimize An Electrical Failure To The Drives?

Mar 26, 2011

I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data

View 10 Replies View Related

Ubuntu Installation :: Dual Boot 10.04 And Windows With Each OS On A Separate Hard Drive?

Jul 28, 2010

I would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.

View 5 Replies View Related

Ubuntu Installation :: Dual Boot With Win7 Separate Hard Drive

Sep 29, 2010

I have Windows 7 x64 on a RAID0 Setup and have a separate 120GB Hard Drive and want to DualBoot with Ubuntu! How do I go by doing that seeing that LiveCD is not detecting Windows 7 Loader?
Twitpic : [URL]

View 3 Replies View Related

Ubuntu Installation :: Booting With Grub With Multiple Hard Drives?

Jan 23, 2011

I have 3 hard drives installed to my system, 1TB, 2TB and 500GB drives with the following configuration:

ledi@ledi-ubuntu:~$ sudo parted /dev/sda print
Model: ATA SAMSUNG HD103UJ (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

[Code]...

I can boot to the Ubuntu installation in the 2TB drive. My problem reversed when I reinstalled grub to one of the Ubuntu installations in the 1TB drive. I can boot to any of the OS's in the 1TB drive, but not to the Ubuntu in the 2TB drive. The error message is the same as above. I have no idea what am I doing wrong and I would be really grateful for any assistance.

View 6 Replies View Related

Ubuntu Installation :: Dual-boot Using Two Hard Drives?

May 1, 2010

this may be a very stupid question, but. My computer has two hard drives. One has Windows XP installed on it. The other is blank.

Is it possible for me to install Ubuntu onto the second hard drive, and run a dual-boot using GRUB during startup? Or does it only work when both OSs are on the same hard drive?

View 1 Replies View Related

Ubuntu Installation :: Dual Boot Across 2 Hard Drives?

May 4, 2010

I would like to install Ubuntu 10.04 on my new 1 TB hard drive. I currently have Windows XP installed on a 160 GB hard drive for things that I cannot do on Ubuntu. I would like to know if it's possible to install the other hard drive, and then dual boot Windows with it? Effectively dual booting across two hard drives. I wouldn't care if GRUB replaces the standard Windows bootloader, just as long as I can choose between the two at startup

View 9 Replies View Related

Debian Installation :: Dual Install - 2 Hard Drives On Same Pc

Aug 5, 2011

I have searched for this but can not find it. I want to install debian 6.0 squeeze on to both of my hard drives and run each as a seperate instance of debian, and be able to choose at boot up which one I want to run. I have an HP with 2 500 gig hard drives, running windows vista currently, processor is an intell quad 2 core 6600, nothing else on the pc for programs and such at this time. I would also like to keep the windows if possible to run other programs at a later time.

View 10 Replies View Related

Ubuntu Installation :: 10.04 And Windows 7 Dual Boot With Seperate Hard Drives?

Jun 21, 2010

I'm a n00b at dual booting and I plan on installing Ubuntu 10.04 on a separate hard drive than my Windows 7 64 bit one in a dual boot situation. I have read that you can do this by unplugging the Windows hard drive, install Ubuntu on the other one, and than plug the Windows hard drive back in and everything will be fine and dandy. Is this correct? If it is, will I have to manually set the Primary and Secondary drive (in the BIOS I think?), or will it automatically do that.

View 6 Replies View Related

Installation :: Dual Boot Menu Setup 2 Hard Drives?

Jun 17, 2010

I need a suggestion on setting up a dual boot menu for my setup. I have two hard drives one with WinXP and a second one with CentOS 5.3 installed. I basically moved the hard drive from another identical machine to this one and so I want to setup a boot menu to access either windows or Linux. CentOS already has grub on it.

What is the simplest method of setting up the dual boot menu? I would like something which is easy to administer which I can just ghost over either the Linux drive or Windows drive or disconnect either and have either boot just fine. I don't ask for much do I?

If I have to go through a little process after ghosting over one or the other drives that would probably be ok. We get updated images for this machine and replace the image on the drives with new images, although Linux shouldn't be reimaged, just windows. So the Linux drive (2nd drive) should not be touched normally.

View 9 Replies View Related

Ubuntu Installation :: Dual Boot Windows And But With Ubuntu Already Installed On A Separate Hard?

Jan 25, 2011

I just bought a new Windows 7 machine and want to install Ubuntu 10.10 for a dual boot environment.There's a lot of info describing how to do this, but it all describes re-partioning the Windows drive, burning Ubuntu on a CD, inserting that CD, etc. I had a dual-boot Windows and Ubuntu machine that just died on me. Windows was on one hard drive and Ubuntu - along with my entire software development environment - was on the other. As far as I know both drives are fine.

When my new (Windows) machine gets here I want to open it up and stick in the Ubuntu hard drive from my old machine... but then I'm not sure what to do. I'd really like to be able to boot to that hard drive (or the Windows one), just like I did before. It seems that this should be simpler than installing a fresh Ubuntu from a special CD, after all, everything is already expanded and working on the hard drive. Can someone give me some pointers that will help me solve this problem?

View 3 Replies View Related

Fedora Installation :: Dual Boot Vista - No Hard Drives Or Partitions Are Shown

Feb 9, 2009

i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.

i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .

View 9 Replies View Related

Ubuntu :: Booting Two Hard Drives?

Jan 23, 2011

I have installed two hard drives. One is a Sata drive and the other an IDE drive.They are both functional drives. On boot up only the Sata drive shows up. How do I get both drives to boot up together please.The Sata drive has Ubuntu on it and the IDE drive has Fedora on it' I would like to access all of them.

View 3 Replies View Related

Ubuntu :: 10.04 / Vista Dual Boot Setup With 3 Hard Drives?

May 23, 2010

I have 3 hard drives: one with vista installed on it working fine, one with 10.04 installed on it and working fine and the last is just a media storage drive. Currently I have been unplugging the windows or ubuntu drive depending on which OS I want to boot. What do I need to do so that I don't have to physically disconnect the drives and can just pick which OS to boot on power up?

View 3 Replies View Related

General :: Dual Boot Windows 7 And Ubuntu Using 2 Different Hard Drives?

Nov 23, 2010

I just started working with Linux over the weekend. I do have a working dual booting system but it's not configured exactly how I want it to be. Currently Windows 7 Ultimate and Ubuntu are on the same hard drive but different partitions. The Windows boot screen comes up and I can select Windows or Ubuntu fine. Grub comes up when I select Ubuntu and I can successfully select any choice in the menu and it will run properly.

Everything works great now so you may wonder why I even want to keep tinkering, well, it's not working how I want it to. This is what I want it to do. I want Windows 7 on disk 0 and Ubuntu on disk 1. I want each OS to have it's own hard drive. I want Grub to be the only boot loader that comes up with the option to select Ubuntu or Windows. I want to skip the window's OS selection screen all together. I can modify Grub, I've already done some of that on my work computer.

I've been installing from windows. Should I use a CD instead? Would that accomplish my goals without doing anything special?

View 3 Replies View Related

Hardware :: Dual Boot With Dos Absolute Two Seperate Hard Drives?

Jun 25, 2010

Ok so first off my hardware Asrock 775dual-vsta Master and Slave hard drives on primary IDE Absolute Linux 2.6.33.3 ; Dos 7.1 (yes Dos 7.1 by itself no windows whatsoever) Absolute Linux=sda1 ; Dos=sdb1

Ok so I can't boot into dos from lilo boot menu. It boots fine however if I tell the bios to boot from the second HDD first (DOS). But it's inconvenient to tell the bios every time on power-up to choose the second hard drive as the first boot device. Here is my lilo.conf boot section

# Linux bootable partition config begins
image = /boot/bzImage
initrd = /boot/initrd.gz
root = /dev/sda1

[Code]...

Either way when I boot from the first hard drive (linux hard drive) and lilo pops up, I select dos and hit enter then nothing... It just sits there and ctrl-alt-delete can't reboot my comp as it's frozen.

I don't wanna have to tell the bios to select my dos hard drive as my primary boot device everytime I wanna boot dos. I wan't my linux hard drive to be my primary boot device and have my dos hard drive selectable from the lilo boot menu. Why can't I do that? What am I doing wrong? I thought this was easier than dual booting from a single hard drive?

View 5 Replies View Related

General :: Dual Booting From 2nd Hard Disk

Apr 28, 2010

I have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.

The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?

View 6 Replies View Related

Hardware :: Dual Booting 2 OS On USB Hard Drive

Aug 17, 2010

I have a 250 gig usb hard drive. I would like to install Mandriva and Open Suse 11.3 on it, is this possible and how do I get the systems loaded. I got Mandriva installed, but when I tried Open Suse it trashed my Mandriva, i.e. I couldn't boot into it.

View 2 Replies View Related

Ubuntu :: 11.04 Dual Monitors ATI 5770 Network With No DHCP 4 Hard Drives To Mount Starcraft 2

May 23, 2011

setup amd64bit created a live DVD of the 11.4 64 bit burn pope inside went to install put selected the second option because putting it on a 60G vertex ocz super fast drive. used the entire drive for ubuntu. have mirror dual monitor installed the proprietary drivers from amd.go to Ubuntu software center type additional drives install and install the proprietary drivers from ati you should be able to figure that out then lauch the ati catalyst control and setup your 1 and 2 monitors so that they are correct.

ok now install Wine ubuntu software thingy tip wine don't do the beta right now im stuck on installing starcraft and mounting the other hard drives will get back to you and make a better guide on this.oh by the way if your Internet isn't connecting automatically you might need to set your IPV4 setting manually this is because you have set your router with DHCP disabled. Code needed for install:

nautilus $HOME

PLAY ON LINUX is working for SC2 Sois crashes though and during install sont font was missing neede to guesse correct button to install.

More useful code

To mount the drive ro (read only):Make a mount point.mount First open a terminal.Then type these commands (assuming the partition is /dev/hdb1):

Code:

sudo mkdir /mnt/music
sudo mount /dev/hdb1 /mnt/music -t ntfs

Note: if the partition is not /dev/hdb1 you will need to adjuxt accordingly.To make the mount automatic at boot you need to edit fstab:

Code:

sudo gedit /etc/fstab

Add this line:

Quote:

/dev/hdb1 /mnt/music ntfs auto,users,ro 0 0

Again, adjust your partition accordingly if needed. Copy and paste the contents of /etc/fstab (in your next post) and type in a terminal "sudo fdisk -l" (w/o quotes) and copy and paste the output.

[code]....

View 3 Replies View Related

Debian Installation :: Booting On Two Separate Disks?

Sep 13, 2010

Got Wintendo7 on one samsung S-ATA disk. ( need it for starcraft2 and Homeworld2... sorry.. )

Now..: Booting Debian Unstable from USB or CD-ROM, then start installer. Tell it to install on second samsung S-ATA disk.
Before I go on, I just feel i will get into some serious trouble with GRUB?

Or will the installer understand, and see the windows7 installation and add it to Grub?

If not, what should I do inside /boot/grub/menu.lst when Debian is up and running?

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved