Hardware :: Machine Not Booting Without Old Hard Drive
Jan 22, 2010
I did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted. I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive. However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message I am given means I think it could be trying to fchk it. Do I need to do something more like remove /dev/sdd?
View 2 Replies
ADVERTISEMENT
May 28, 2010
I have two 3 hard drives, one with Linux Mint, one with Fedora, one with Windows. For some reason, I can only choose Mint or Windows in the menu at the start. Also, when I boot on mint, I see my hard drive with Windows:
320 GB Hard Drive: 320 GB Filesystem.
But for the hard drive with Fedora I only see:
1.0 TB Hard Drive: 524 MB Filesystem.
From Mint I can go in this filesystem and there is a folder name Grub, can I take the info there and paste it into Mint's grub ? If so, how ?
View 4 Replies
View Related
Aug 17, 2010
I have a 250 gig usb hard drive. I would like to install Mandriva and Open Suse 11.3 on it, is this possible and how do I get the systems loaded. I got Mandriva installed, but when I tried Open Suse it trashed my Mandriva, i.e. I couldn't boot into it.
View 2 Replies
View Related
Jan 13, 2010
Have a machine running Fedora Core 4 that has been used as a mail/web server. Now want to transfer drive to a newer machine. Can this be done without having to re-install fc4 and what becomes of current network settings
Very new using linux but must get this done soon
View 1 Replies
View Related
Jan 15, 2009
I installed a new hard drive to my system. I use a program called R-Drive image to copy all my os to my new drive. It done a pretty good job too, its an exact copy. I deleted the old one. But obviously now I cant boot. I had a look at the menu.lst file i dont know what to change it to. heres my drive setup,
C: - Windows Vista - Ubuntu
D: - Documents - Swap File
E: - Games
View 9 Replies
View Related
Jan 22, 2010
I have ubuntu running inside of a virtualbox on an xp machine. Is there any way to mount the hard drive that the virtual machine isn't using? AKA the C: drive of the computer?
View 8 Replies
View Related
Jul 22, 2011
I use Unity 11.04 on a 64-bit machine with 8Gig and a TB hard drive, so resources shouldn't be a problem. The pane on the left hand side (showing my computer main folders has disappeared when I click on "Home Folder". So has the ability to have two panels. I can see the hole folders but not any of the extra folders (dragged folders or usb sticks).
I now use Krusader which solves most of my problems. However there is a folder of files I use a lot, so before I lost this ability I had draged the folder to the left hand column showing all my folders. Now I can't access the folder I had dragged to the left hand panel, and it seems to have disappeared from its original place.
View 6 Replies
View Related
Jul 17, 2010
I have a Sony VAIO AR series, it contains two separate 120GB hard drives that were originally configured in a raid. They're called hd0, and hd1. I disabled the raid and partitioned hd1 in 3 ways, one medium sized partition for the operating system (ext4), one large partition for storage (ext4) and one small partition for Swap space. I then installed Ubuntu onto hd1 with help from UNetbootin. After installation went fine I loaded up Windows installer, created two NTFS partitions, one medium and one large, and installed Windows 7 of the medium sized partition. Now I can't figure out how to boot into the Ubuntu side on hd1. Needless to say, in Windows, hd1 is not visable at all. I can see my two NTFS partitions fine.
When booting up I go through two main screens. The first screen "Matrix Storage Manager Option ROM," lists the physical disks (0, and 1.) and gives me the option to enter configuration with [cntrl+i]. The second screen gives me a list of options to boot from, Yet they are all Windows options and many are redundant. The list includes "Enter Command Line," which when selected tells me "Boot failed! Press any key to enter command line." command line brings me to "grub>" I tried booting Ubuntu from this command line, but don't have much to work with here. I followed this guide, but it didn't take me to completion and I'm not sure where to go from here. http://www.mepis.org/docs/en/index.p...m_command_line
[Code]...
View 3 Replies
View Related
May 8, 2011
If an old bios and mainboard is being used, such that it cannot handle the large size of HD, then is it useful to say use a live CD and from its initial menu (pressed a key), choose 'Boot From First Hard Disk'? Would this be similar in getting around a bios and disk size limitation I wonder - like - does the use of a live CD in this way avoid using the bios to point to the active partition??
The reason for asking is that a friend has a couple of quality old rack mounted server machines and wants to use Ubuntu having now fitted 80 GB empty drives. Live CD seems ok, and 11.04 install goes ok but on boot up grub comes back with an error.
I recall that early machines cannot see larger(?) HDs for booting purposes even though installs go ok in very large HDs. I wondered if a live CD to boot up temporarily - trouble shooting - would be worth trying for this reason, or am I way off?
View 8 Replies
View Related
May 21, 2011
I have a dual boot machine with WinXP/Linux Mint on it. I am looking to erase both of them and put up Ubuntu 11.04.
I have chosen to go with a live USB install for this. The live USB boots fine and everything seems usable. However, when I tried to install it would tell me that I do not have 4GB available for the install which seemed a bit weird since I have a 160GB Maxtor HDD.
After digging around a bit I realized that the system does not see my hard drive. Running fdisk -l would only show the USB drive that I am booting from and not the main HDD.
I tried to have a look in /dev to see if my HDD is there and not mounted. But aside from sda which is the USB I did not find an sdb or hd entry.
Has anyone encountered a similar problem while trying to install Ubuntu 11.04?
P.S.: The HDD works fine, I can see it in BIOS and in the other 2 OS-es that I have installed.
View 5 Replies
View Related
Aug 3, 2009
I seem to have a complex issue on my hands that i can't figure out. first, i wasn't able to get access to my LVM'd hard drives via SSH without half of the content being missing or locked out (read-only or unable to open at all). the problem then went up to being unable to boot up - all i got was a long slew of [100.1234] ata1.00: error messages (they eventually DO stop once they get to around 998.234234 or whatever, and then i can log in and it seems to be "stable").
Part way through this rebooting ordeal i realized / decided to make power-on-self-test stop and wait if it finds errors (via bios) - that showed me that my 750G SATA drive is "bad" and my two (older) 120G & 250G IDE drives are "ok". i then unplugged the SATA drive, rebooted, and didn't see those error messages. however, my LVM was still obviously not coming together (since LVM was made up of the 120G, 250G, and 750G drives)
So, now it seems:
a) I can't boot smoothly with all drives in place
b) I can't do anything with lvm if i remove the 750G sata
c) With all drives hooked up, i can wait 10mins for the errors to go away, but STILL can't do anything with lvm
d) I need to recover the lvm stuff so that i can nicely migrate ALL those files (1.1TB of it) onto a new 1.5TB drive and do away with lvm
This is all running ubuntu 7.10 server edition (32-bit version on a 64-bit computer). i DID post a question on the ubuntu forum as well but so far got no replies at all.
Here's a few pics of the booting process, with one or two "fail" lines showing.
View 14 Replies
View Related
May 8, 2011
I have a mini ITX computer that runs a software that I have been trying to clone to another hard drive as back up. When I do clone it, it is the exact same copy down to every byte. When I try to boot from the cloned hard drive, it starts booting, then displays some text:
Then is says some of the files are not found including a encryption signer key not found.
I do no know the next step I need to take. Is this becasue it is running off a different hard drive? I do not understand a bzImage too well, but does it have anything to do with that file?
View 4 Replies
View Related
May 17, 2011
Currently I'm running a smaba on slackware 13.1 with a 1TB Hard drive for dumpng files rather than sharing. My partition table is as follows:
#####################################################################
/dev/sdb2 swap swap defaults 0 0
/dev/sdb1 / ext4 defaults 1 1
/dev/sdb3 /home ext4 defaults 1 2
[code]....
Now that i need to add 2 more 1TB hard drives and I want to stripe these two drives to make one partition for large space.
View 4 Replies
View Related
Aug 12, 2010
would putting ubuntu on an external hard drive and booting it from refit work? and would i was starting up my imac 11,2 my ipod was bootable for some reason?
View 1 Replies
View Related
Jan 9, 2011
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies
View Related
May 16, 2011
I'm going to install and dualboot pinguy os with my current install of Ubuntu 11.04.I'm stuck on the advanced partitioning part, how do I give Pinguy a 30GB hard drive?And does this involve creating a new partition table?
View 9 Replies
View Related
Jul 23, 2011
I am buying a new laptop and am curious about dual booting it. I currently run Ubuntu full time, but will need windows for a few applications. (there are no cross over applications to do this)
When you put both windows and ubuntu on a computer do you share the hard drive? Meaning would I be able to access all my music in windows and then restart my computer-run ubuntu, would I have access to all the files?
View 6 Replies
View Related
Mar 24, 2011
Is there a way to auto run a script when a usb hard drive is plugged in without creating a udev rule or something similar. The idea is that no matter which computer I plug the drive into it runs the script automatically (I want to EXPORT some directories when the drive is plugged in)?
View 3 Replies
View Related
Apr 25, 2010
I would like to install Ubuntu (latest stable) on a VirtualBox machine, set it up, install several apps, and then deploy it on a real PC. I think the main issue is the new hardware (which sould be different from the 'virtual' one). What should I do at that time? Is Ubuntu able to detect and install the new hardware?
View 1 Replies
View Related
Jan 31, 2010
I don't understand this: I did Quote: rsync -avz --delete /media/PPT-WORDS centguy@centos52-64-dell:/media/ while I was at home connecting my portable hard drive to a desktop centos52 machine. On the next day, I came to the office and I connect my portable hard drive to another centos52 machine, do do
[Code]....
View 3 Replies
View Related
Jun 9, 2010
VMware virtual machine with the RedHat9 can not recognize win7 hard drive, so can not be mount,how to solve? Situation is showed in the Figure,when type the command ,it do not display the hard disk, the picture is below [URL]
View 7 Replies
View Related
Jan 6, 2010
I accidentally deleted the linux mint 8 that was on there due to a small issue discussed on another thread(long story followed by a stupid mistake). after then i reinstalled linux using the .iso i found on the website. all is well. I boot up linux on the external and it runs great. then i turn off the laptop and try to plug it into another laptop( which i used the external hard drive on before and worked) and it went through the bios screen but then after slight lag(5 seconds longer then usual) the blinking cursor in the top left corner would not display anything, anything meaning "booting GRUB" or any other signs of activity. after waiting some time i quit and tried it back on the other laptop, which it was just working on, only to get the same result. I am confused about why it would work the first go around but nothing past that.
The only thing i altered on the external after i installed linux was that i put my home directory into it( from another version of linux mint)
View 4 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Jan 17, 2011
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
View 7 Replies
View Related
Sep 11, 2010
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies
View Related
