General :: Dual Booting - Any Alternative For Partitioning?
Jul 4, 2011
I just found out about Linux and well I love it, it's fast, sleek and easy to use design make it rise above the competitors. So this is where I'm at. I have the latest version of Fedora on a thumbdrive and I when the thumbdrive is plugged in and I turn it on it boots up Fedora, but everytime I turn it off I lose all data and I start a fresh session. So when I got to instal Fedora to my hard drive. [URL]
Now I read a few articles on how to do partitions but, all of them want me to put in the original windows 7 instal cd/dvd into my laptop and somehow partition. But here's the thing I'm on a Compaq Mini real solid computer I love it but thats beside the point. What it really comes down to is how I do I get this dual boot working without having to reset everything and pretty much is there alternative for partitioning.
I bought a new laptop having the following specs:Processor: Intel I5RAM: 6GBHD: 500 GBVideo card: nvidia with cuda with 1 GB RAM.My Hard Disc already has 3 partitions: C=448 GBs (where windows 7 is installed=64 bit) D:Recovery (16.5GBs) and E:HP_TOOLS (99MB).I want to have dual boot and install linux also. BUT I dont want to delete the other partitions as well. How do I do that?Am I able to shrink C partition without disturbing windows installation and creat another partition in C drive? What it will be called: Primary or logical partition?
I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
I referred to this video, to install ubuntu(NOT on windows partition) and also run windows XP, and im well enjoying ubuntu. i have some hard-disk issues, and i'm going to format the whole hard-disk. I will format and repartition using windows xp installer. I'm leaving 20 GB for ubuntu. So I can install ubuntu in 2 ways...
1) While re-partitioning, i can leave 20 GB unallocated and later put ubuntu there
OR
2) Install windows XP the normal way, and then allocate 20GB for ubuntu using GPART - by shrinking a windows partition. (as shown in video)
I'm going to install and dualboot pinguy os with my current install of Ubuntu 11.04.I'm stuck on the advanced partitioning part, how do I give Pinguy a 30GB hard drive?And does this involve creating a new partition table?
I don't want sympathy, but merely explain what I'm up against. I'm 63 years old. I'm on medical and mental disability (Cognitive failure, the beginning of Alzheimer's). I used to be a good computer tech, but now, because of my memory problems, I don't remember how to do a lot of things with a computer.I'm seeking assistance (not 24/7 help or hand-holding)to help me reformat,partition, and set-up a dual-boot for both WIN 2000 Pro and Ubuntu Linux to operate programs where I can use my Amateur (Ham) Radio in digital modes (PSK-31, PSK-64, BPSK, cw, etc). I'm choosing NOT to run Ham Radio DeLuxe, as it's bloated with M$ "code" and could be hacked and messed with.
The hard drive is a Maxtor 80 gig (78 g formatted). I have another drive,a Western Digital 40 gig (37 g formatted) that I use for Windows as well, but mostly it contains Excel spreadsheets with Part 90 - Public Safety frequency information for the local (within 250 miles) from my home. It's a FAT 32 and I'd like the 80 gig to match that
I have a 2 year old Acer laptop running Windows 7 from a 160 GB HDD. This is currently divided into C:/ for Windows and D:/ for data with two small hidden partitions for Acer Utilities and Windows reinstall.
I ran OpenSUSE v11.2 from a LiveCD and decided I would like to dual boot it with W7. I downloaded the full 4.2 GB OpenSUSE Install DVD and ran that as recommended. All went well until I reached the Partitioning stage where the Intelligent Partitioner refused to offer any option other than delete all the Windows partitions and create a single extended partition for OpenSUSE.
It offers (without option):
Delete Windows /dev/sda2 70 GB impossible to resize (25 Gb are free under W7) Delete Windows /dev/sda3 70 GB although 40 GB are free Create Extended /dev/sda2 140 GB Create swap /dev/sda5 2 GB even though I have 4 GB RAM Create Root /dev/sda6 20 GB ext4 Create Home /dev/sda7 115 GB ext4
The whole HDD is currently formatted to NTFS as a factory default.
Is their a way to resize sda2 and/or sda3 to install OpenSUSE as their is lots of free space available for this installation?
My current laptop (purchased off of a local computer store owner, I think it's brand is generic but it is called a SPARTAN for those that need to know) is running windows 7 professional and I am attempting to install Slackware 13.0. Now, I did the whole partitioning thing under windows (computer>manage>etc.) but for some reason whenever I boot the DVD to install it seems like it cannot read my hard drive. I then went directly into setup > target partition and I notice that it is reading my hard drive because my two partitions that windows exists on is there.
Now, what is says when I use cfdisk is that it seems to be reading the DVD and it gives me an error saying that the disk is read-only (which I see why). Is there a step I'm skipping while preparing the hard drive while under windows or is there just something wrong with my computer completely? I tried to read the readme and attempted to use fdisk but it's really confusing for me considering I have never used terminal type code before (except random DOS commands). I can get it installed in virtualbox but I just can't install it on the main computer. If it's worth mentioning, I downloaded the DVD ISO off of the website.
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version. I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I have a hard drive that I have partitioned into two large chunks. I have Fedora 12 on one, and I would like to put another distro on the other. I do most things on my Fedora, but on the Second distro, I'll be doing more sensitive things such as banking. If I wanted to "Lock out" the Banking distro, and only boot to it if I have an SD card or Flash drive, to act as a "key" would it be simple as putting the boot sector of the banking Distro onto the removable media, or is there something else I need to do?
to summarize, I'd like my system to automatically boot to Fedora, unless I have some form of removable media (preferably an SD card but Possibly a Flash drive) plugged in; in which case, I'd like it to boot to my banking Distro. What would be the easiest, way to go about this?
At the end of this week I'm going to get a new PC. It will have a 80GB SSD ( 2.5" SSD INTEL X25-M 80GB) and a 1TB HD. I want to dual boot Windows 7 and Ubuntu on it.The SSD will be for fast bootup and should also contain the core OS stuff. I will partition it for both Windows 7 and Linux but I'm not certain how big I should make both partitions. I was considering going with 60GB for Windows and 20GB for Linux but is that big enough for keeping the core Ubuntu on?
I have Windows 7 starter on an ASUS 1005 HAB, 10 inch, with 149.5 GB HDD. Drive C is 139.03 GB. There is a partition and it has 10 GB (Primary Partition) unlike C it is 100% free and another has 15 MB also free and it is called the EFI System Partition.So to dual boot, how should I prepare the partitions? Do I need make a new partition in what is now drive C?
Keeping at least 45 GB for Windows 7.I have ready to install, Ubuntu Netbook 10.10. Considering trying others as well, like Fedora, Mint or Ubuntu Netbook 10.04.2.
I have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.
The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?
I would like to install OpenSUSE 11.4 on the same hard drive where Ubuntu 10.10 resides. I have plenty of free space following the Ubuntu partitions to do this.
I typically create three partitions: a root (/) mounted partition, a swap partition, and a home (/home) mounted partition.
I have these questions:
Is it advisable to load two Linux OS's on the same drive or would this be problematic?
If advisable, then: Can I use the same swap partition for both Ubuntu and OpenSUSE (as I plan to run only one OS at a given time)?
How will this effect booting (as Ubuntu uses GRUB2 while OpenSUSE uses GRUB)? Will the GRUB OS selection menu successfully display the two OS's for selection? If not, can I fix the problem through GRUB commands?
I am keeping Windows 7 completely separate with its own boot block. I do this by turning off appropriate hard drives during installations. Thereafter, I use F12 when prompted during boot-up to select the Linux (default) or Windows boot drive. When I boot through the Linux hard drive, I would like the Ubuntu or OpenSUSE Linux OS to be selectable through GRUB (or GRUB2).
Dual booting suselinux with Windows 7, when I boot into either OS I need to reset the PC clock. The clock is off by 6 hours, which coincidentally is the difference between my time zone and GMT, -6 hours. Its not six hours behind but rather six hours ahead of my local time. My interpretation the setting for my local time zone is not being saved? Or are they being overridden by the OS'es? Both OS have the same time zone setting, Central Standard Time USA?
How to put ophcrack on linux because of my supposed intentions of plugging it in waiting 20 mins and cracking passwords wherever people do this I know having to waste my space triple booting the thing with Ophcrack XP/Vista and BackTrack. How does one go about dual booting a flash drive? I could not find much on the internet.
My PC is an older model Toshiba Satellite that I've upgraded a bit to handle Windows 7 Ultimate x64.
Recently, I joined a CST program at a local college, and there is an entire mod on Linux. I'm at the top of my class, and I aim to stay that way, so I found out what distro they were using, and downloaded openSUSE 11.3. I tried to install it once, and I failed, though I didn't screw up my Windows...much.
I've created an entire 132GB partition, and a 3 or 4GB swap, but I keep getting an error about the boot loader not being on a partition entirely below 128GB. So, I set the partition for 127.98GB, and still with the error.
I'm no slacker when it comes to working with Windows, but when it comes to Linux, of any type, I'm horrible. I need to be able to install the fully functional openSUSE OS alongside my Windows 7 Ultimate, without completely screwing my Windows install up. I can recover, so I'm not afraid to try new things.
yesterday i was interested in Ubuntu,so i got the Lice CD and tried it out for a bit, seemed really cool and i decided to install it! So i partition during the installation setup (Yes i defragged on Vista really well before that), and it loaded all the stuffs. So at the Grub screen i chose vista, let it understand the partition changes, and let it finish all of that. Then i went onto Ubuntu, almost to the interesting part, So i tried to update, that worked, then it said to restart, so i restarted it and it said some line like:
*Shutting down now (not exact) In the white text on the black screen and it just sat there. So i Ctrl+Alt+Del it and it ran the Grub again, i went back into Ubuntu and tried to install my driver for my Graphics card (nVidia GeForce GT 130M w/1gb of vram)and it said it didnt come up with anything. So i decided to get rid of ubuntu cause i didnt know how it worked and because i fugured something was wrong or my computer couldnt function properly, or that i did something... Well anyways, so i go into Vista and knock out Ubuntus Partition.
So i restart Vista so it can recognise the changes in Partitions, and it gives me Grub Error 22! So i put the Live CD in and partition the drive and iand install Ubuntu again after trying to use Acers Recovery Disks that i made when i first got the computer (Thursday, and no they arent vista disks, there Acer Recov Disks) And it seemed to work fine, so im al ok. I workked on vista for awhile getting back my wiped Hdd, and i go to Ubuntu after to work on it.
it wont go into Grub, just boots to Vista, so once again i put in the Live CD and click install, and nitice that Ubuntus P:artition is Corrupted! So i delete the partition from Live CD and reinstal once again. now i did the Graphics card and updates on Ubuntu again and now i have mre errors then ever. Whenever i start up Ubuntu i get six mini screens on the screen and it gives me that line of words when i try and shut down/restart. It also wont let me change the Visual effects. Ubuntu seems like a pain in the butt right now, and unless theres any hopw of sucessfully dual booting then i wanna know how to get it off. I dont understand how linux works at all, and i feel much more comfortable using Vista, although Ubuntu may be cool n all.
What happens if I write over Pardus2011 with another OS such as Fadora or Suse? Does the boot loader stay? I really can't risk losing everything on my windows partition. If I can, when installing do I ignore installing a new boot loader? It usually asks...
I have a windows 98 box.I have a slax ISO and a slax TAR. My slax TAR has all the modules I want.
My windows 98 hard drive has only 1 partition and is fully formatted.I have used windows 98 to download my TAR.I want to dual boot slax and windows 98.How do I go about this? So do I have to repartition?
1. I have windows xp on my notebook compaq presario v2000. 2. Wanted to load linux as dual boot. 3. Tried with Suse linux, but there was some blank or black screen problem after installation. 4. Someone suggested Ubuntu linux. 5. Downloaded and burned ubuntu on a cd. 6. But this time during installation during partitioning there was a serious problem. 7. On ubuntu webpage they say for partiioning i will get 4 option, but i got only three options in my cd. 8. The missing option was the most important , which was required for dual boot. " Guided resize and use free space". 9. So i had to abort my Ubuntu installation as using any other option could have effected my current xp installation or might have formated my whole notebook. 10. So any comment why the dual boot partitioning option was absent in my ubuntu cd. 11. Or there is some thing to be activated in my notebook setting to enable dual boot.
I'm running OS X 10.5.8 and Ubuntu 9.04 on a Macbook 4,1, and I want to remove the Ubuntu partition so I can free up hard drive space. However, the linux swap partition is located in between the OS X and Ubuntu partitions, and GParted won't let me remove it when I boot from an Ubuntu Live disk, and OS X Disk Utility can't affect it either. I followed the dual booting instructions here, and I pretty much just want to undo all of it and get back to an OS X only machine.
I have a problem trying to install CentOS 5 as a dual-boot with my Windows 7. Using Windows tools, I shrunk my main partition and created about a 100GB of unallocated free space. Then, I restarted my computer, booting from the CentOS dvd, but when choosing "Use free space on selected drives and create default layout" option during installation, I get an error saying that partitions couldn't be allocated as primary partitions and that there is not enough space left to create partition for /boot.
I was wondering if it were possible to have a dual boot system (XP and Debian) where when you press, say F7, you will boot into windows or if your press F6 you will boot into Linux. I have a monitor that doesn't support the initial start-up graphics
I have just installed Fedora 12 on a 10GB partition separate from the pre-existing Windows XP partition. My problem is that when I turn on my aspire one ao751h it doesn't give me the option to boot Windows XP even though when I mount the partition with XP on it the files are all still there. I think it has something to do with GRUB which I have never dealt with before or the way I set up the partitions when installing Fedora 12. How would I change the start-up screen to allow me to boot from my XP partition as well?
I tried to dual boot my lenovoT6570 with Fedora14 and win7. But the linux becomes extrememly slow and the firefox window cannot even be clicked. I reinstalled the linux again but the same problem persists. Is it compatible with dual booting? any solution or suggestion?
I am a bit confused about a dual booting system. I Already have windows 7 on my computer and wish to install ubuntu 11.04 but I keep reading about Grub 2. Does grub automatically install with ubuntu or do I need to install it prior to installing ubutu ?
When you install a dual-boot of Ubuntu, one of the frustrating things that you'll immediately notice is that Ubuntu is now set as the default operating system in the Grub loader. There's an easy way to switch back to using Windows as the default.
There are many way to change bootup options
This is one way to change bootup option
First you have to go system --> Administration and see for Startupmanager if it is not their
Now go to Applications --> Accessories --> Terminal and type
sudo apt-get install startupmanager It will ask for your password give it now It will ask Do you want to continue {y/n}? Type "y" and press Enter After installation is over close the terminal.
Now once again you have to go system --> Administration ---> now you will see a new Startupmanager button, just press that startupmanager button it will open a window
Enter your password to perform administrative task "now you have to give your password and press enter now you will see startUp-Manager window in that you will see Timeout
Timeout in seconds: by default it is 10 second if you want, you have to increase the second 10,20 etc.,
Default operating system: by default it is Ubuntu
if you want to change click the Tab and you will see five options that is
Ubuntu with Linux 2.6.35.22 generic Ubuntu with Linux 2.6.35.22 generic(Recovery mode) Memory test (memtest86+) memory (memtest 86+, serial console 115200) Microsoft windows xp professional (on/ext/sda1)
and now you go to Microsoft windows xp professional (on/ext/sda1) and click it now it will change Ubuntu to windows just press close tab after closing that window you have to restart your system just wait for 10 second and see now your system will boot windows xp by default
I am attempting to install the 64-bit version of Ubuntu 10.10 on my computer.I'm intending to dual boot Win7 and Ubuntu with one hard drive that came factory partitioned into two drives. Win7 was installed first.Ok, onto the issue. The Install is going well until I get to the Allocate Drive Space form (so almost right off the bat). I first created a swap partition within my "second drive" (really just a partition of the larger drive). This stalled out and I had to exit setup and restart the computer. Booted into Win7 to be safe and Win only recognizes the First Drive and no longer the second drive. So, I boot up the Ubuntu Install CD and get back to the allocate drive space form I see I have a (linux-swap) drive with the same gb space as before.
So, from here I create a partition within the "second drive" 20gb of ext4 type space. This does not stall out and creates a partition of 20 gb. But, now it says I have 175 gb of "Unusable" space. This is very unsettling and using the "revert" button does nothing.How do I fix this space so I can finish the install?[URL]
